Skip to contentSkip to conversation

batman-adv: Deprecation of sysfs

PATCH New Sven Eckelmann 1 participant 6 messages Mar 3, 2019

Subsystems (3)
lore
Share & tools
lore

Sven Eckelmann

author maintainer
#0 lore raw

cover batman-adv: Deprecation of sysfs

The old sysfs configuration interface was frowned upon by other kernel developers. To work around this problem, the sysfs files were replaced by the batadv generic netlink family. Still they are currently available as alternative interface.

These files cannot be removed immediately because userspace tools might still depend on it. Instead schedule for its removal in 2021. To aid userspace tool developers, warn them when these files are still accessed and provide an option to build batman-adv without sysfs support.

Kind regards,
Sven

Sven Eckelmann (5):
batman-adv: Drop documentation about debugfs files
batman-adv: Drop documentation about sysfs files
batman-adv: Make sysfs support optional
batman-adv: ABI: Mark sysfs files as deprecated
batman-adv: Warn about sysfs file access

 .../sysfs-class-net-batman-adv                |   2 +
 .../sysfs-class-net-mesh                      |   2 +
 Documentation/networking/batman-adv.rst       | 110 +++++------------
 MAINTAINERS                                   |   4 +-
 Makefile                                      |   3 +
 README.external.rst                           |   1 +
 gen-compat-autoconf.sh                        |   3 +-
 net/batman-adv/Kconfig                        |  12 ++
 net/batman-adv/Makefile                       |   2 +-
 net/batman-adv/bridge_loop_avoidance.c        |   1 -
 net/batman-adv/gateway_client.c               |   1 -
 net/batman-adv/main.c                         |  73 +++++++++++
 net/batman-adv/main.h                         |   2 +
 net/batman-adv/sysfs.c                        | 116 +++++++-----------
 net/batman-adv/sysfs.h                        |  38 +++++-
 15 files changed, 210 insertions(+), 160 deletions(-)
 rename Documentation/ABI/{testing => obsolete}/sysfs-class-net-batman-adv (92%)
 rename Documentation/ABI/{testing => obsolete}/sysfs-class-net-mesh (97%)
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 1/5 batman-adv: Drop documentation about debugfs files

The debugfs files were marked as deprecated by commit fee04b6f72cf ("batman-adv: Mark debugfs functionality as deprecated"). The documentation should not advertise its usage anymore and instead promote the generic netlink family and a userspace tool to access it.

---
 Documentation/networking/batman-adv.rst | 29 ++++++++-----------------
 1 file changed, 9 insertions(+), 20 deletions(-)
Documentation/networking/batman-adv.rst +9 -20
index 245fb6c0..1b9ff47c 100644
@@ -74,23 +74,9 @@ All mesh wide settings can be found in batman's own interface folder::
   bridge_loop_avoidance gw_sel_class  network_coding
   distributed_arp_table hop_penalty   orig_interval
 
-There is a special folder for debugging information::
-
-  $ ls /sys/kernel/debug/batman_adv/bat0/
-  bla_backbone_table log         neighbors         transtable_local
-  bla_claim_table    mcast_flags originators
-  dat_cache          nc          socket
-  gateways           nc_nodes    transtable_global
-
-Some of the files contain all sort of status information regarding the mesh
-network. For example, you can view the table of originators (mesh
-participants) with::
-
-  $ cat /sys/kernel/debug/batman_adv/bat0/originators
-
-Other files allow to change batman's behaviour to better fit your requirements.
-For instance, you can check the current originator interval (value in
-milliseconds which determines how often batman sends its broadcast packets)::
+Some files allow to change batman-adv's behaviour to better fit your
+requirements. For instance, you can check the current originator interval (value
+in milliseconds which determines how often batman sends its broadcast packets)::
 
   $ cat /sys/class/net/bat0/mesh/orig_interval
   1000
@@ -103,6 +89,10 @@ In very mobile scenarios, you might want to adjust the originator interval to a
 lower value. This will make the mesh more responsive to topology changes, but
 will also increase the overhead.
 
+Information about the current state can be accessed via the batadv generic
+netlink family. batctl provides human readable version via its debug tables
+subcommands.
+
 
 Usage
 =====
@@ -147,10 +137,9 @@ batman-adv module. When building batman-adv as part of kernel, use "make
 menuconfig" and enable the option ``B.A.T.M.A.N. debugging``
 (``CONFIG_BATMAN_ADV_DEBUG=y``).
 
-Those additional debug messages can be accessed using a special file in
-debugfs::
+Those additional debug messages can be accessed using the perf infrastructure::
 
-  $ cat /sys/kernel/debug/batman_adv/bat0/log
+  $ trace-cmd stream -e batadv:batadv_dbg
 
 The additional debug output is by default disabled. It can be enabled during
 run time. Following log_levels are defined:
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 2/5 batman-adv: Drop documentation about sysfs files

In reply to Sven Eckelmann

The sysfs files will be marked as deprecated in the near future. They are already replaced by the batadv generic netlink family. The documentation should not advertise its usage anymore and instead promote the generic netlink family and a userspace tool to access it.

---
 Documentation/networking/batman-adv.rst | 91 +++++++------------------
 1 file changed, 24 insertions(+), 67 deletions(-)
Documentation/networking/batman-adv.rst +24 -67
index 1b9ff47c..18020943 100644
@@ -27,24 +27,8 @@ Load the batman-adv module into your kernel::
   $ insmod batman-adv.ko
 
 The module is now waiting for activation. You must add some interfaces on which
-batman can operate. After loading the module batman advanced will scan your
-systems interfaces to search for compatible interfaces. Once found, it will
-create subfolders in the ``/sys`` directories of each supported interface,
-e.g.::
-
-  $ ls /sys/class/net/eth0/batman_adv/
-  elp_interval iface_status mesh_iface throughput_override
-
-If an interface does not have the ``batman_adv`` subfolder, it probably is not
-supported. Not supported interfaces are: loopback, non-ethernet and batman's
-own interfaces.
-
-Note: After the module was loaded it will continuously watch for new
-interfaces to verify the compatibility. There is no need to reload the module
-if you plug your USB wifi adapter into your machine after batman advanced was
-initially loaded.
-
-The batman-adv soft-interface can be created using the iproute2 tool ``ip``::
+batman-adv can operate. The batman-adv soft-interface can be created using the
+iproute2 tool ``ip``::
 
   $ ip link add name bat0 type batadv
 
@@ -52,38 +36,37 @@ To activate a given interface simply attach it to the ``bat0`` interface::
 
   $ ip link set dev eth0 master bat0
 
-Repeat this step for all interfaces you wish to add. Now batman starts
+Repeat this step for all interfaces you wish to add. Now batman-adv starts
 using/broadcasting on this/these interface(s).
 
-By reading the "iface_status" file you can check its status::
-
-  $ cat /sys/class/net/eth0/batman_adv/iface_status
-  active
-
 To deactivate an interface you have to detach it from the "bat0" interface::
 
   $ ip link set dev eth0 nomaster
 
+The same can also be done using the batctl interface subcommand::
+
+  batctl -m bat0 interface create
+  batctl -m bat0 interface add -M eth0
+
+To detach eth0 and destroy bat0::
 
-All mesh wide settings can be found in batman's own interface folder::
+  batctl -m bat0 interface del -M eth0
+  batctl -m bat0 interface destroy
 
-  $ ls /sys/class/net/bat0/mesh/
-  aggregated_ogms       fragmentation isolation_mark routing_algo
-  ap_isolation          gw_bandwidth  log_level      vlan0
-  bonding               gw_mode       multicast_mode
-  bridge_loop_avoidance gw_sel_class  network_coding
-  distributed_arp_table hop_penalty   orig_interval
+There are additional settings for each batadv mesh interface, vlan and hardif
+which can be modified using batctl. Detailed information about this can be found
+in its manual.
 
-Some files allow to change batman-adv's behaviour to better fit your
-requirements. For instance, you can check the current originator interval (value
-in milliseconds which determines how often batman sends its broadcast packets)::
+For instance, you can check the current originator interval (value
+in milliseconds which determines how often batman-adv sends its broadcast
+packets)::
 
-  $ cat /sys/class/net/bat0/mesh/orig_interval
+  $ batctl -M bat0 orig_interval
   1000
 
 and also change its value::
 
-  $ echo 3000 > /sys/class/net/bat0/mesh/orig_interval
+  $ batctl -M bat0 orig_interval 3000
 
 In very mobile scenarios, you might want to adjust the originator interval to a
 lower value. This will make the mesh more responsive to topology changes, but
@@ -142,37 +125,11 @@ Those additional debug messages can be accessed using the perf infrastructure::
   $ trace-cmd stream -e batadv:batadv_dbg
 
 The additional debug output is by default disabled. It can be enabled during
-run time. Following log_levels are defined:
-
-.. flat-table::
-
-   * - 0
-     - All debug output disabled
-   * - 1
-     - Enable messages related to routing / flooding / broadcasting
-   * - 2
-     - Enable messages related to route added / changed / deleted
-   * - 4
-     - Enable messages related to translation table operations
-   * - 8
-     - Enable messages related to bridge loop avoidance
-   * - 16
-     - Enable messages related to DAT, ARP snooping and parsing
-   * - 32
-     - Enable messages related to network coding
-   * - 64
-     - Enable messages related to multicast
-   * - 128
-     - Enable messages related to throughput meter
-   * - 255
-     - Enable all messages
-
-The debug output can be changed at runtime using the file
-``/sys/class/net/bat0/mesh/log_level``. e.g.::
-
-  $ echo 6 > /sys/class/net/bat0/mesh/log_level
-
-will enable debug messages for when routes change.
+run time::
+
+  $ batctl -m bat0 loglevel routes tt
+
+will enable debug messages for when routes and translation table entries change.
 
 Counters for different types of packets entering and leaving the batman-adv
 module are available through ethtool::
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 3/5 batman-adv: Make sysfs support optional

In reply to Sven Eckelmann

The sysfs files will be marked as deprecated in the near future. They are already replaced by the batadv generic netlink family. Add an Kconfig option to disable the sysfs support for users who want to test their tools or want to safe some space. This setting should currently still be enabled by default to keep backward compatible with legacy tools.

---
 Makefile                               |  3 ++
 README.external.rst                    |  1 +
 gen-compat-autoconf.sh                 |  3 +-
 net/batman-adv/Kconfig                 | 12 +++++
 net/batman-adv/Makefile                |  2 +-
 net/batman-adv/bridge_loop_avoidance.c |  1 -
 net/batman-adv/gateway_client.c        |  1 -
 net/batman-adv/main.c                  | 73 ++++++++++++++++++++++++++
 net/batman-adv/main.h                  |  2 +
 net/batman-adv/sysfs.c                 | 70 ------------------------
 net/batman-adv/sysfs.h                 | 38 +++++++++++++-
 11 files changed, 130 insertions(+), 76 deletions(-)
Makefile +3 -0
index bccea1b3..9f7f127e 100644
@@ -29,6 +29,8 @@ export CONFIG_BATMAN_ADV_DAT=y
 export CONFIG_BATMAN_ADV_NC=n
 # B.A.T.M.A.N. multicast optimizations:
 export CONFIG_BATMAN_ADV_MCAST=y
+# B.A.T.M.A.N. sysfs support:
+export CONFIG_BATMAN_ADV_SYSFS=y
 # B.A.T.M.A.N. tracing support:
 export CONFIG_BATMAN_ADV_TRACING=n
 # B.A.T.M.A.N. V routing algorithm (experimental):
@@ -78,6 +80,7 @@ BUILD_FLAGS := \
 	CONFIG_BATMAN_ADV_DAT=$(CONFIG_BATMAN_ADV_DAT) \
 	CONFIG_BATMAN_ADV_NC=$(CONFIG_BATMAN_ADV_NC) \
 	CONFIG_BATMAN_ADV_MCAST=$(CONFIG_BATMAN_ADV_MCAST) \
+	CONFIG_BATMAN_ADV_SYSFS=$(CONFIG_BATMAN_ADV_SYSFS) \
 	CONFIG_BATMAN_ADV_TRACING=$(CONFIG_BATMAN_ADV_TRACING) \
 	CONFIG_BATMAN_ADV_BATMAN_V=$(CONFIG_BATMAN_ADV_BATMAN_V) \
 	INSTALL_MOD_DIR=updates/
README.external.rst +1 -0
index f2bf7e4b..782fa337 100644
@@ -49,6 +49,7 @@ module).  Available  options  and  their    possible   values are
  * ``CONFIG_BATMAN_ADV_DAT=[y*|n]`` (B.A.T.M.A.N. Distributed ARP Table)
  * ``CONFIG_BATMAN_ADV_MCAST=[y*|n]`` (B.A.T.M.A.N. multicast optimizations)
  * ``CONFIG_BATMAN_ADV_NC=[y|n*]`` (B.A.T.M.A.N. Network Coding)
+ * ``CONFIG_BATMAN_ADV_SYSFS=[y*|n]`` (B.A.T.M.A.N. sysfs support)
  * ``CONFIG_BATMAN_ADV_TRACING=[y|n*]`` (B.A.T.M.A.N. tracing support)
  * ``CONFIG_BATMAN_ADV_BATMAN_V=[y*|n]`` (B.A.T.M.A.N. V routing algorithm)
 
gen-compat-autoconf.sh +2 -1
index 7a8c8eef..d0556714 100755
@@ -58,7 +58,8 @@ gen_config 'CONFIG_BATMAN_ADV_BLA' ${CONFIG_BATMAN_ADV_BLA:="y"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_DAT' ${CONFIG_BATMAN_ADV_DAT:="y"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_MCAST' ${CONFIG_BATMAN_ADV_MCAST:="y"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_NC' ${CONFIG_BATMAN_ADV_NC:="n"} >> "${TMP}"
-gen_config 'CONFIG_BATMAN_ADV_TRACING' ${CONFIG_BATMAN_ADV_TRACING:="n"} >> "${TMP}"
+gen_config 'CONFIG_BATMAN_ADV_SYSFS' ${CONFIG_BATMAN_ADV_SYSFS:="n"} >> "${TMP}"
+gen_config 'CONFIG_BATMAN_ADV_TRACING' ${CONFIG_BATMAN_ADV_TRACING:="y"} >> "${TMP}"
 gen_config 'CONFIG_BATMAN_ADV_BATMAN_V' ${CONFIG_BATMAN_ADV_BATMAN_V:="y"} >> "${TMP}"
 
 # only regenerate compat-autoconf.h when config was changed
net/batman-adv/Kconfig +12 -0
index a31db5e9..bf0bab25 100644
@@ -109,6 +109,18 @@ config BATMAN_ADV_DEBUG
 	  buffer. The output is controlled via the batadv netdev specific
 	  log_level setting.
 
+config BATMAN_ADV_SYSFS
+	bool "batman-adv sysfs entries"
+	depends on BATMAN_ADV
+	default y
+	help
+	  Say Y here if you want to enable batman-adv device configuration and
+	  status interface through sysfs attributes. It is replaced by the
+	  batadv generic netlink family but still used by various userspace
+	  tools and scripts.
+
+	  If unsure, say Y.
+
 config BATMAN_ADV_TRACING
 	bool "B.A.T.M.A.N. tracing support"
 	depends on BATMAN_ADV
net/batman-adv/Makefile +1 -1
index a887ecc3..ecd703e5 100644
@@ -41,7 +41,7 @@ batman-adv-y += originator.o
 batman-adv-y += routing.o
 batman-adv-y += send.o
 batman-adv-y += soft-interface.o
-batman-adv-y += sysfs.o
+batman-adv-$(CONFIG_BATMAN_ADV_SYSFS) += sysfs.o
 batman-adv-$(CONFIG_BATMAN_ADV_TRACING) += trace.o
 batman-adv-y += tp_meter.o
 batman-adv-y += translation-table.o
net/batman-adv/bridge_loop_avoidance.c +0 -1
index 4fb01108..ab3c600a 100644
@@ -59,7 +59,6 @@
 #include "netlink.h"
 #include "originator.h"
 #include "soft-interface.h"
-#include "sysfs.h"
 #include "translation-table.h"
 
 static const u8 batadv_announce_mac[4] = {0x43, 0x05, 0x43, 0x05};
net/batman-adv/gateway_client.c +0 -1
index f5811f61..801de407 100644
@@ -53,7 +53,6 @@
 #include "originator.h"
 #include "routing.h"
 #include "soft-interface.h"
-#include "sysfs.h"
 #include "translation-table.h"
 
 /* These are the offsets of the "hw type" and "hw address length" in the dhcp
net/batman-adv/main.c +73 -0

103 lines not on this page · raw message

net/batman-adv/main.h +2 -0
index 3ed669d7..d67cc354 100644
@@ -394,5 +394,7 @@ static inline void batadv_add_counter(struct batadv_priv *bat_priv, size_t idx,
 
 unsigned short batadv_get_vid(struct sk_buff *skb, size_t header_len);
 bool batadv_vlan_ap_isola_get(struct batadv_priv *bat_priv, unsigned short vid);
+int batadv_throw_uevent(struct batadv_priv *bat_priv, enum batadv_uev_type type,
+			enum batadv_uev_action action, const char *data);
 
 #endif /* _NET_BATMAN_ADV_MAIN_H_ */
net/batman-adv/sysfs.c +0 -70

79 lines not on this page · raw message

net/batman-adv/sysfs.h +36 -2
index 705ffbe7..95411d24 100644
@@ -57,6 +57,8 @@ struct batadv_attribute {
 			 char *buf, size_t count);
 };
 
+#ifdef CONFIG_BATMAN_ADV_SYSFS
+
 int batadv_sysfs_add_meshif(struct net_device *dev);
 void batadv_sysfs_del_meshif(struct net_device *dev);
 int batadv_sysfs_add_hardif(struct kobject **hardif_obj,
@@ -66,7 +68,39 @@ int batadv_sysfs_add_vlan(struct net_device *dev,
 			  struct batadv_softif_vlan *vlan);
 void batadv_sysfs_del_vlan(struct batadv_priv *bat_priv,
 			   struct batadv_softif_vlan *vlan);
-int batadv_throw_uevent(struct batadv_priv *bat_priv, enum batadv_uev_type type,
-			enum batadv_uev_action action, const char *data);
+
+#else
+
+static inline int batadv_sysfs_add_meshif(struct net_device *dev)
+{
+	return 0;
+}
+
+static inline void batadv_sysfs_del_meshif(struct net_device *dev)
+{
+}
+
+static inline int batadv_sysfs_add_hardif(struct kobject **hardif_obj,
+					  struct net_device *dev)
+{
+	return 0;
+}
+
+static inline void batadv_sysfs_del_hardif(struct kobject **hardif_obj)
+{
+}
+
+static inline int batadv_sysfs_add_vlan(struct net_device *dev,
+					struct batadv_softif_vlan *vlan)
+{
+	return 0;
+}
+
+static inline void batadv_sysfs_del_vlan(struct batadv_priv *bat_priv,
+					 struct batadv_softif_vlan *vlan)
+{
+}
+
+#endif
 
 #endif /* _NET_BATMAN_ADV_SYSFS_H_ */
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/5 batman-adv: ABI: Mark sysfs files as deprecated

In reply to Sven Eckelmann

The sysfs files are replaced by the batadv generic netlink family. The old sysfs configuration interface was frowned upon by other kernel developers. But the files cannot be removed immediately because userspace tools might still depend on it. Instead schedule for its removal in 2021.

---
 .../ABI/{testing => obsolete}/sysfs-class-net-batman-adv      | 2 ++
 Documentation/ABI/{testing => obsolete}/sysfs-class-net-mesh  | 2 ++
 MAINTAINERS                                                   | 4 ++--
 3 files changed, 6 insertions(+), 2 deletions(-)
 rename Documentation/ABI/{testing => obsolete}/sysfs-class-net-batman-adv (92%)
 rename Documentation/ABI/{testing => obsolete}/sysfs-class-net-mesh (97%)
Documentation/ABI/obsolete/sysfs-class-net-batman-adv renamed from Documentation/ABI/testing/sysfs-class-net-batman-adv +2 -0
similarity index 92%
rename from Documentation/ABI/testing/sysfs-class-net-batman-adv
rename to Documentation/ABI/obsolete/sysfs-class-net-batman-adv
index 89810684..5bdbc8d4 100644
@@ -1,3 +1,5 @@
+This ABI is deprecated and will be removed after 2021. It is
+replaced with the batadv generic netlink family.
 
 What:           /sys/class/net/<iface>/batman-adv/elp_interval
 Date:           Feb 2014
Documentation/ABI/obsolete/sysfs-class-net-mesh renamed from Documentation/ABI/testing/sysfs-class-net-mesh +2 -0
similarity index 97%
rename from Documentation/ABI/testing/sysfs-class-net-mesh
rename to Documentation/ABI/obsolete/sysfs-class-net-mesh
index c2b956d4..04c1a293 100644
@@ -1,3 +1,5 @@
+This ABI is deprecated and will be removed after 2021. It is
+replaced with the batadv generic netlink family.
 
 What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
 Date:           May 2010
MAINTAINERS +2 -2
index 5fe4a8f3..e205c8e3 100644
@@ -6,8 +6,8 @@ L:	[email protected] (moderated for non-subscribers)
 W:	https://www.open-mesh.org/
 Q:	https://patchwork.open-mesh.org/project/batman/list/
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-class-net-batman-adv
-F:	Documentation/ABI/testing/sysfs-class-net-mesh
+F:	Documentation/ABI/obsolete/sysfs-class-net-batman-adv
+F:	Documentation/ABI/obsolete/sysfs-class-net-mesh
 F:	Documentation/networking/batman-adv.rst
 F:	include/uapi/linux/batadv_packet.h
 F:	include/uapi/linux/batman_adv.h
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/5 batman-adv: Warn about sysfs file access

In reply to Sven Eckelmann

The sysfs files to read and modify the configuration settings were replaced by the batadv generic netlink family. They are also marked as obsolete in the ABI documentation. But not all users of this functionality might follow changes in the Documentation/ABI/obsolete/ folder. They might benefit from a warning messages about the deprecation of the functionality which they just tried to access

batman_adv: [Deprecated]: batctl (pid 30381) Use of sysfs file "orig_interval". Use batadv genl family instead

---
 net/batman-adv/sysfs.c | 46 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
net/batman-adv/sysfs.c +46 -0
index 0a0f5775..73edf099 100644
@@ -19,6 +19,7 @@
 #include "sysfs.h"
 #include "main.h"
 
+#include <asm/current.h>
 #include <linux/atomic.h>
 #include <linux/compiler.h>
 #include <linux/device.h>
@@ -34,6 +35,7 @@
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
 #include <linux/rtnetlink.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/string.h>
@@ -52,6 +54,16 @@
 #include "network-coding.h"
 #include "soft-interface.h"
 
+/**
+ * batadv_sysfs_deprecated() - Log use of deprecated batadv sysfs access
+ * @attr: attribute which was accessed
+ */
+static void batadv_sysfs_deprecated(struct attribute *attr)
+{
+	pr_warn_ratelimited(DEPRECATED "%s (pid %d) Use of sysfs file \"%s\".\nUse batadv genl family instead",
+			    current->comm, task_pid_nr(current), attr->name);
+}
+
 static struct net_device *batadv_kobj_to_netdev(struct kobject *obj)
 {
 	struct device *dev = container_of(obj->parent, struct device, kobj);
@@ -141,6 +153,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 	struct batadv_priv *bat_priv = netdev_priv(net_dev);		\
 	ssize_t length;							\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	length = __batadv_store_bool_attr(buff, count, _post_func, attr,\
 					  &bat_priv->_name, net_dev);	\
 									\
@@ -155,6 +168,7 @@ ssize_t batadv_show_##_name(struct kobject *kobj,			\
 {									\
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);	\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	return sprintf(buff, "%s\n",					\
 		       atomic_read(&bat_priv->_name) == 0 ?		\
 		       "disabled" : "enabled");				\
@@ -178,6 +192,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 	struct batadv_priv *bat_priv = netdev_priv(net_dev);		\
 	ssize_t length;							\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	length = __batadv_store_uint_attr(buff, count, _min, _max,	\
 					  _post_func, attr,		\
 					  &bat_priv->_var, net_dev,	\
@@ -194,6 +209,7 @@ ssize_t batadv_show_##_name(struct kobject *kobj,			\
 {									\
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);	\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	return sprintf(buff, "%i\n", atomic_read(&bat_priv->_var));	\
 }									\
 
@@ -218,6 +234,7 @@ ssize_t batadv_store_vlan_##_name(struct kobject *kobj,			\
 					      attr, &vlan->_name,	\
 					      bat_priv->soft_iface);	\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	if (vlan->vid)							\
 		batadv_netlink_notify_vlan(bat_priv, vlan);		\
 	else								\
@@ -238,6 +255,7 @@ ssize_t batadv_show_vlan_##_name(struct kobject *kobj,			\
 			     atomic_read(&vlan->_name) == 0 ?		\
 			     "disabled" : "enabled");			\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	batadv_softif_vlan_put(vlan);					\
 	return res;							\
 }
@@ -259,6 +277,7 @@ ssize_t batadv_store_##_name(struct kobject *kobj,			\
 	struct batadv_priv *bat_priv;					\
 	ssize_t length;							\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);		\
 	if (!hard_iface)						\
 		return 0;						\
@@ -286,6 +305,7 @@ ssize_t batadv_show_##_name(struct kobject *kobj,			\
 	struct batadv_hard_iface *hard_iface;				\
 	ssize_t length;							\
 									\
+	batadv_sysfs_deprecated(attr);					\
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);		\
 	if (!hard_iface)						\
 		return 0;						\
@@ -430,6 +450,7 @@ static ssize_t batadv_show_bat_algo(struct kobject *kobj,
 {
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 
+	batadv_sysfs_deprecated(attr);
 	return sprintf(buff, "%s\n", bat_priv->algo_ops->name);
 }
 
@@ -446,6 +467,8 @@ static ssize_t batadv_show_gw_mode(struct kobject *kobj, struct attribute *attr,
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 	int bytes_written;
 
+	batadv_sysfs_deprecated(attr);
+
 	/* GW mode is not available if the routing algorithm in use does not
 	 * implement the GW API
 	 */
@@ -480,6 +503,8 @@ static ssize_t batadv_store_gw_mode(struct kobject *kobj,
 	char *curr_gw_mode_str;
 	int gw_mode_tmp = -1;
 
+	batadv_sysfs_deprecated(attr);
+
 	/* toggling GW mode is allowed only if the routing algorithm in use
 	 * provides the GW API
 	 */
@@ -554,6 +579,8 @@ static ssize_t batadv_show_gw_sel_class(struct kobject *kobj,
 {
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 
+	batadv_sysfs_deprecated(attr);
+
 	/* GW selection class is not available if the routing algorithm in use
 	 * does not implement the GW API
 	 */
@@ -574,6 +601,8 @@ static ssize_t batadv_store_gw_sel_class(struct kobject *kobj,
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 	ssize_t length;
 
+	batadv_sysfs_deprecated(attr);
+
 	/* setting the GW selection class is allowed only if the routing
 	 * algorithm in use implements the GW API
 	 */
@@ -604,6 +633,8 @@ static ssize_t batadv_show_gw_bwidth(struct kobject *kobj,
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 	u32 down, up;
 
+	batadv_sysfs_deprecated(attr);
+
 	down = atomic_read(&bat_priv->gw.bandwidth_down);
 	up = atomic_read(&bat_priv->gw.bandwidth_up);
 
@@ -619,6 +650,8 @@ static ssize_t batadv_store_gw_bwidth(struct kobject *kobj,
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
 	ssize_t length;
 
+	batadv_sysfs_deprecated(attr);
+
 	if (buff[count - 1] == '\n')
 		buff[count - 1] = '\0';
 
@@ -643,6 +676,7 @@ static ssize_t batadv_show_isolation_mark(struct kobject *kobj,
 {
 	struct batadv_priv *bat_priv = batadv_kobj_to_batpriv(kobj);
 
+	batadv_sysfs_deprecated(attr);
 	return sprintf(buff, "%#.8x/%#.8x\n", bat_priv->isolation_mark,
 		       bat_priv->isolation_mark_mask);
 }
@@ -666,6 +700,8 @@ static ssize_t batadv_store_isolation_mark(struct kobject *kobj,
 	u32 mark, mask;
 	char *mask_ptr;
 
+	batadv_sysfs_deprecated(attr);
+
 	/* parse the mask if it has been specified, otherwise assume the mask is
 	 * the biggest possible
 	 */
@@ -921,6 +957,8 @@ static ssize_t batadv_show_mesh_iface(struct kobject *kobj,
 	ssize_t length;
 	const char *ifname;
 
+	batadv_sysfs_deprecated(attr);
+
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);
 	if (!hard_iface)
 		return 0;
@@ -1025,6 +1063,8 @@ static ssize_t batadv_store_mesh_iface(struct kobject *kobj,
 	struct net_device *net_dev = batadv_kobj_to_netdev(kobj);
 	struct batadv_store_mesh_work *store_work;
 
+	batadv_sysfs_deprecated(attr);
+
 	if (buff[count - 1] == '\n')
 		buff[count - 1] = '\0';
 
@@ -1056,6 +1096,8 @@ static ssize_t batadv_show_iface_status(struct kobject *kobj,
 	struct batadv_hard_iface *hard_iface;
 	ssize_t length;
 
+	batadv_sysfs_deprecated(attr);
+
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);
 	if (!hard_iface)
 		return 0;
@@ -1107,6 +1149,8 @@ static ssize_t batadv_store_throughput_override(struct kobject *kobj,
 	u32 old_tp_override;
 	bool ret;
 
+	batadv_sysfs_deprecated(attr);
+
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);
 	if (!hard_iface)
 		return -EINVAL;
@@ -1146,6 +1190,8 @@ static ssize_t batadv_show_throughput_override(struct kobject *kobj,
 	struct batadv_hard_iface *hard_iface;
 	u32 tp_override;
 
+	batadv_sysfs_deprecated(attr);
+
 	hard_iface = batadv_hardif_get_by_netdev(net_dev);
 	if (!hard_iface)
 		return -EINVAL;
Signature · 1 line
2.20.1