target/ppc/spapr: Clear partition table entry when allocating hash table
PATCH 1/1 target/ppc/spapr: Clear partition table entry when allocating hash table
If we allocate a hash page table then we know that the guest won't be using process tables, so set the partition table entry maintained for the guest to zero. If this isn't done, then the guest radix bit will remain set in the entry. This means that when the guest calls H_REGISTER_PROCESS_TABLE there will be a mismatch between then flags and the value in spapr->patb_entry, and the call will fail. The guest will then panic:
Failed to register process table (rc=-4) kernel BUG at arch/powerpc/platforms/pseries/lpar.c:959
The result being that it isn't possible to boot a hash guest on a P9 system.
Also fix a bug in the flags parsing in h_register_process_table() which was introduced by the same patch, and simplify the handling to make it less likely that errors will be introduced in the future. The effect would have been setting the host radix bit LPCR_HR for a hash guest using process tables, which currently isn't supported and so couldn't have been triggered.
--- hw/ppc/spapr.c | 1 + hw/ppc/spapr_hcall.c | 12 ++++++++---- 2 files changed, 9 insertions(+), 4 deletions(-)
hw/ppc/spapr.c +1 -0
@@ -1632,6 +1632,7 @@ void spapr_reallocate_hpt(sPAPRMachineState *spapr, int shift, } }/* We're setting up a hash table, so that means we're not radix */ + spapr->patb_entry =0 ;spapr_set_all_lpcrs (0 ,LPCR_HR |LPCR_UPRT ); }
hw/ppc/spapr_hcall.c +8 -4
@@ -1339,6 +1339,7 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu,target_ulong proc_tbl = args[1 ];target_ulong page_size = args[2 ];target_ulong table_size = args[3 ]; +target_ulong update_lpcr =0 ;uint64_t cproc;if (flags & ~FLAGS_MASK ) {/* Check no reserved bits are set */
@@ -1394,10 +1395,13 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu, spapr->patb_entry = cproc;/* Save new process table */ /* Update the UPRT, HR and GTSE bits in the LPCR for all cpus */ -spapr_set_all_lpcrs (((flags & (FLAG_RADIX |FLAG_HASH_PROC_TBL )) ? - (LPCR_UPRT |LPCR_HR ) :0 ) | - ((flags &FLAG_GTSE ) ?LPCR_GTSE :0 ), -LPCR_UPRT |LPCR_HR |LPCR_GTSE ); +if (flags &FLAG_RADIX )/* Radix must use process tables, also set HR */ + update_lpcr |= (LPCR_UPRT |LPCR_HR ); +else if (flags &FLAG_HASH_PROC_TBL )/* Hash with process tables */ + update_lpcr |=LPCR_UPRT ; +if (flags &FLAG_GTSE )/* Guest translation shootdown enable */ + update_lpcr |=FLAG_GTSE ; +spapr_set_all_lpcrs (update_lpcr,LPCR_UPRT |LPCR_HR |LPCR_GTSE );if (kvm_enabled ()) { return kvmppc_configure_v3_mmu(cpu, flags & FLAG_RADIX,
Signature · 1 line
2.13.6
David Gibson
AppliedQuoted 21 lines · Suraj Jitindar Singh
If we allocate a hash page table then we know that the guest won't be using process tables, so set the partition table entry maintained for the guest to zero. If this isn't done, then the guest radix bit will remain set in the entry. This means that when the guest calls
H_REGISTER_PROCESS_TABLEthere will be a mismatch between then flags and the value inspapr->patb_entry, and the call will fail. The guest will then panic:Failed to register process table (rc=-4) kernel BUG at
arch/powerpc/platforms/pseries/lpar.c:959The result being that it isn't possible to boot a hash guest on a P9 system.
Also fix a bug in the flags parsing in
h_register_process_table()which was introduced by the same patch, and simplify the handling to make it less likely that errors will be introduced in the future. The effect would have been setting the host radix bitLPCR_HRfor a hash guest using process tables, which currently isn't supported and so couldn't have been triggered.
Quoted 3 lines
Fixes 00fd075e18 "target/ppc/spapr: Set LPCR:HR when using Radix mode"Signed-off-by Suraj Jitindar Singh <[email protected]>
Applied, thanks.
Quoted 47 lines
--- hw/ppc/spapr.c | 1 + hw/ppc/spapr_hcall.c | 12 ++++++++---- 2 files changed, 9 insertions(+), 4 deletions(-)hw/ppc/spapr.c +1
-0@@ -1632,6 +1632,7 @@ void spapr_reallocate_hpt(sPAPRMachineState *spapr, int shift, } }/* We're setting up a hash table, so that means we're not radix */ + spapr->patb_entry =0 ;spapr_set_all_lpcrs (0 ,LPCR_HR |LPCR_UPRT ); }hw/ppc/spapr_hcall.c +8
-4@@ -1339,6 +1339,7 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu,target_ulong proc_tbl = args[1 ];target_ulong page_size = args[2 ];target_ulong table_size = args[3 ]; +target_ulong update_lpcr =0 ;uint64_t cproc;if (flags & ~FLAGS_MASK ) {/* Check no reserved bits are set */ @@ -1394,10 +1395,13 @@ static target_ulong h_register_process_table(PowerPCCPU *cpu, spapr->patb_entry = cproc;/* Save new process table */ /* Update the UPRT, HR and GTSE bits in the LPCR for all cpus */ -spapr_set_all_lpcrs (((flags & (FLAG_RADIX |FLAG_HASH_PROC_TBL )) ? - (LPCR_UPRT |LPCR_HR ) :0 ) | - ((flags &FLAG_GTSE ) ?LPCR_GTSE :0 ), -LPCR_UPRT |LPCR_HR |LPCR_GTSE ); +if (flags &FLAG_RADIX )/* Radix must use process tables, also set HR */ + update_lpcr |= (LPCR_UPRT |LPCR_HR ); +else if (flags &FLAG_HASH_PROC_TBL )/* Hash with process tables */ + update_lpcr |=LPCR_UPRT ; +if (flags &FLAG_GTSE )/* Guest translation shootdown enable */ + update_lpcr |=FLAG_GTSE ; +spapr_set_all_lpcrs (update_lpcr,LPCR_UPRT |LPCR_HR |LPCR_GTSE );if (kvm_enabled ()) { return kvmppc_configure_v3_mmu(cpu, flags & FLAG_RADIX,
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson