Skip to contentSkip to conversation

fs/binfmt_misc_lib.sh: Add common remove_binary_type()

PATCH New Xiao Yang 2 participants 6 messages Feb 22, 2019 – Mar 5, 2019 exec and binfmt

lore
Share & tools
lore

Xiao Yang

author
#0 lore raw

PATCH 1/2 fs/binfmt_misc_lib.sh: Add common remove_binary_type()

1) Add common remove_binary_type() so that we can remove the registered binary type by it.
2) Take use of remove_binary_type() in binfmt_misc01.sh.

---
 testcases/kernel/fs/binfmt_misc/binfmt_misc01.sh   | 7 ++-----
 testcases/kernel/fs/binfmt_misc/binfmt_misc_lib.sh | 9 +++++++++
 2 files changed, 11 insertions(+), 5 deletions(-)
testcases/kernel/fs/binfmt_misc/binfmt_misc01.sh +2 -5
index 6c9aa64..06106e8 100755
@@ -42,11 +42,8 @@ verify_binfmt_misc()
 	cat "$mntpoint/$name" >/dev/null 2>&1
 	tst_res TFAIL "Register a binary type successfully"
 
-	if [ -f "$mntpoint/$name" ]; then
-		(echo -1 >"$mntpoint/$name") 2>/dev/null
-		[ $? -ne 0 -o -f "$mntpoint/$name" ] && \
-			tst_res TWARN "Failed to remove a binary type"
-	fi
+	[ -f "$mntpoint/$name" ] && \
+		remove_binary_type "$mntpoint/$name"
 }
 
 do_test()
testcases/kernel/fs/binfmt_misc/binfmt_misc_lib.sh +9 -0
index 5d00ab6..4976825 100755
@@ -17,6 +17,15 @@ rmod_binfmt_misc=0
 umount_binfmt_misc=0
 binfmt_misc_mntpoint="ltp_binfmt_misc"
 
+remove_binary_type()
+{
+	local name=$1
+
+	(echo -1 >"$name") 2>/dev/null
+	[ $? -ne 0 -o -f "$name" ] && \
+		tst_res TWARN "Fail to remove a binary type"
+}
+
 get_binfmt_misc_mntpoint()
 {
 	local mntpoint
Signature · 1 line
1.8.3.1
author
#1 lore raw

PATCH 2/2 fs/binfmt_misc02.sh: Add new test for basic functionality

Register a new binary type and then check if binfmt_misc recognises the binary type in some conditions.

---
 runtest/fs                                         |   1 +
 testcases/kernel/fs/binfmt_misc/Makefile           |   4 +-
 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh   | 107 +++++++++++++++++++++
 testcases/kernel/fs/binfmt_misc/datafiles/Makefile |  13 +++
 .../kernel/fs/binfmt_misc/datafiles/file.extension |   1 +
 .../kernel/fs/binfmt_misc/datafiles/file.magic     |   1 +
 6 files changed, 125 insertions(+), 2 deletions(-)
 create mode 100755 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh
 create mode 100644 testcases/kernel/fs/binfmt_misc/datafiles/Makefile
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.extension
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.magic
runtest/fs +1 -0
index 227c186..ef2e848 100644
@@ -84,3 +84,4 @@ isofs isofs.sh
 fs_fill fs_fill
 
 binfmt_misc01 binfmt_misc01.sh
+binfmt_misc02 binfmt_misc02.sh
testcases/kernel/fs/binfmt_misc/Makefile +2 -2
index f9819ad..14437b5 100644
@@ -7,6 +7,6 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc_lib.sh
+INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc02.sh binfmt_misc_lib.sh
 
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +107 -0

107 lines not on this page · raw message

testcases/kernel/fs/binfmt_misc/datafiles/Makefile new file +13 -0
new file mode 100644
index 0000000..e6d1487
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang <[email protected]>
+
+top_srcdir              ?= ../../../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/binfmt_misc02
+INSTALL_TARGETS		:= file.extension file.magic
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/fs/binfmt_misc/datafiles/file.extension new file +1 -0
new file mode 100755
index 0000000..054ee07
@@ -0,0 +1 @@
+print "This is test for extension\n"
testcases/kernel/fs/binfmt_misc/datafiles/file.magic new file +1 -0
new file mode 100755
index 0000000..a018abf
@@ -0,0 +1 @@
+ print "This is test for magic\n"
Signature · 1 line
1.8.3.1
#2 lore raw

PATCH 2/2 fs/binfmt_misc02.sh: Add new test for basic functionality

Hi!

Quoted 2 lines

Register a new binary type and then check if binfmt_misc recognises the binary type in some conditions.

Generally looks good, couple of comments below.

Quoted 54 lines
---
 runtest/fs                                         |   1 +
 testcases/kernel/fs/binfmt_misc/Makefile           |   4 +-
 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh   | 107 +++++++++++++++++++++
 testcases/kernel/fs/binfmt_misc/datafiles/Makefile |  13 +++
 .../kernel/fs/binfmt_misc/datafiles/file.extension |   1 +
 .../kernel/fs/binfmt_misc/datafiles/file.magic     |   1 +
 6 files changed, 125 insertions(+), 2 deletions(-)
 create mode 100755 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh
 create mode 100644 testcases/kernel/fs/binfmt_misc/datafiles/Makefile
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.extension
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.magic
runtest/fs +1 -0
index 227c186..ef2e848 100644
@@ -84,3 +84,4 @@ isofs isofs.sh
 fs_fill fs_fill
 
 binfmt_misc01 binfmt_misc01.sh
+binfmt_misc02 binfmt_misc02.sh
testcases/kernel/fs/binfmt_misc/Makefile +2 -2
index f9819ad..14437b5 100644
@@ -7,6 +7,6 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc_lib.sh
+INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc02.sh binfmt_misc_lib.sh
 
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +12 -0
new file mode 100755
index 0000000..5eb6bb8
@@ -0,0 +1,107 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang <[email protected]>
+#
+# Description:
+# Register a new binary type and then check if binfmt_misc
+# recognises the binary type in some conditions.
+# 1) binfmt_misc should recognise the binary type when extension
+#    or magic is matched.
+# 2) binfmt_misc should not recognise the binary type when extension

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 22

Quoted 10 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +10 -0
+#    or magic is mismatched.
+# 3) binfmt_misc should not recognise the binary type when it is
+#    disabled.
+#
+# Note:
+# We use various delimiteris to register a new binary type.
+
+TST_CNT=8
+TST_TESTFUNC=do_test
+TST_NEEDS_CMDS="perl"

I wonder if we can avoid perl dependency by (mis)using cat instead of proper interpreter.

Quoted 21 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +21 -0
+. binfmt_misc_lib.sh
+
+expect_recognised()
+{
+	local file=$1
+	local string=$2
+
+	eval $file >temp 2>&1
+	if [ $? -eq 0 ] && grep -q "$string" temp; then
+		tst_res TPASS "Register and recognise a binary type successfully"
+	else
+		tst_res TFAIL "Fail to recognise a binary type"
+	fi
+}
+
+expect_unrecognised()
+{
+	local file=$1
+	local string=$2
+
+	eval $file >temp 2>&1

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 54

Quoted 10 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +10 -0
+	if [ $? -ne 0 ] && ! grep -q "$string" temp; then
+		tst_res TPASS "Fail to recognise a binary type"
+	else
+		tst_res TFAIL "Recognise a binary type successfully"
+	fi
+}
+
+verify_binfmt_misc()
+{
+	local delimiter=${1:0:1}
                          ^
			  This is bashism should be replaced for example
			  with $(echo "$a" | head -c1)

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 58

Quoted 4 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +4 -0
+	local name=$(echo "$1" | awk -F $delimiter '{print $2}')
+	local ttype=$(echo "$1" | awk -F $delimiter '{print $3}')
+	local tfile=$2
+	local disabled=$3

Can't we just run each test twice once with enabled and once with disabled binfmt handler?

Quoted 87 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +49 -0
+	local mntpoint=$(get_binfmt_misc_mntpoint)
+
+	(echo "$1" >"$mntpoint/register") 2>/dev/null
+	if [ $? -ne 0 -o ! -f "$mntpoint/$name" ]; then
+		tst_res TFAIL "Fail to register a binary type"
+		return
+	fi
+
+	[ "$ttype" = "E" ] && local tstring="This is test for extension"
+	[ "$ttype" = "M" ] && local tstring="This is test for magic"
+
+	if [ "$disabled" = "1" ]; then
+		(echo 0 >"$mntpoint/$name") 2>/dev/null
+		if [ $? -ne 0 ] || grep -q enable "$mntpoint/$name"; then
+			remove_binary_type "$mntpoint/$name"
+			tst_res TFAIL "Fail to disable a binary type"
+			return
+		fi
+	fi
+
+	[ -z "$disabled" ] && expect_recognised "$tfile" "$tstring"
+	[ -n "$disabled" ] && expect_unrecognised "$tfile" "$tstring"
+
+	remove_binary_type "$mntpoint/$name"
+}
+
+do_test()
+{
+	case $1 in
+	1) verify_binfmt_misc ":textension:E::extension::$(which perl):" \
+			      "$TST_DATAROOT/file.extension";;
+	2) verify_binfmt_misc ":tmagic:M:1:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic";;
+	3) verify_binfmt_misc ".textension.E..extension..$(which perl)." \
+			      "$TST_DATAROOT/file.extension";;
+	4) verify_binfmt_misc ",tmagic,M,1,print,,$(which perl)," \
+			      "$TST_DATAROOT/file.magic";;
+	5) verify_binfmt_misc ":textension:E::ltp::$(which perl):" \
+			      "$TST_DATAROOT/file.extension" "0";;
+	6) verify_binfmt_misc ":tmagic:M:0:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic" "0";;
+	7) verify_binfmt_misc ":textension:E::extension::$(which perl):" \
+			      "$TST_DATAROOT/file.extension" "1";;
+	8) verify_binfmt_misc ":tmagic:M:1:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic" "1";;
+	esac
+}
+
+tst_run
testcases/kernel/fs/binfmt_misc/datafiles/Makefile new file +13 -0
new file mode 100644
index 0000000..e6d1487
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang <[email protected]>
+
+top_srcdir              ?= ../../../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/binfmt_misc02
+INSTALL_TARGETS		:= file.extension file.magic
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/fs/binfmt_misc/datafiles/file.extension new file +1 -0
new file mode 100755
index 0000000..054ee07
@@ -0,0 +1 @@
+print "This is test for extension\n"
testcases/kernel/fs/binfmt_misc/datafiles/file.magic new file +1 -0
new file mode 100755
index 0000000..a018abf
@@ -0,0 +1 @@
+ print "This is test for magic\n"
Signature · 1 line
1.8.3.1
Signature · 2 lines
Cyril Hrubis
[email protected]
author
#3 lore raw

PATCH 2/2 fs/binfmt_misc02.sh: Add new test for basic functionality

Quoted 63 lines · Cyril Hrubis

Hi!

Quoted 2 lines

Register a new binary type and then check if binfmt_misc recognises the binary type in some conditions.

Generally looks good, couple of comments below.

Quoted 58 lines
---
  runtest/fs                                         |   1 +
  testcases/kernel/fs/binfmt_misc/Makefile           |   4 +-
  testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh   | 107 +++++++++++++++++++++
  testcases/kernel/fs/binfmt_misc/datafiles/Makefile |  13 +++
  .../kernel/fs/binfmt_misc/datafiles/file.extension |   1 +
  .../kernel/fs/binfmt_misc/datafiles/file.magic     |   1 +
  6 files changed, 125 insertions(+), 2 deletions(-)

create mode 100755 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh create mode 100644 testcases/kernel/fs/binfmt_misc/datafiles/Makefile create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.extension create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.magic

runtest/fs +1 -0
index 227c186..ef2e848 100644
@@ -84,3 +84,4 @@ isofs isofs.sh
  fs_fill fs_fill
 
  binfmt_misc01 binfmt_misc01.sh
+binfmt_misc02 binfmt_misc02.sh
testcases/kernel/fs/binfmt_misc/Makefile +2 -2
index f9819ad..14437b5 100644
@@ -7,6 +7,6 @@ top_srcdir              ?= ../../../..
 
  include $(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc_lib.sh
+INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc02.sh binfmt_misc_lib.sh
 
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +16 -0
new file mode 100755
index 0000000..5eb6bb8
@@ -0,0 +1,107 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang<[email protected]>
+#
+# Description:
+# Register a new binary type and then check if binfmt_misc
+# recognises the binary type in some conditions.
+# 1) binfmt_misc should recognise the binary type when extension
+#    or magic is matched.
+# 2) binfmt_misc should not recognise the binary type when extension
+#    or magic is mismatched.
+# 3) binfmt_misc should not recognise the binary type when it is
+#    disabled.
+#
Quoted 8 lines

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 22

Quoted 6 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +6 -0
+# Note:
+# We use various delimiteris to register a new binary type.
+
+TST_CNT=8
+TST_TESTFUNC=do_test
+TST_NEEDS_CMDS="perl"

I wonder if we can avoid perl dependency by (mis)using cat instead of proper interpreter.

Hi Cyril,

Yes, we can use cat instead. :-)

Quoted 35 lines
Quoted 21 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +21 -0
+. binfmt_misc_lib.sh
+
+expect_recognised()
+{
+	local file=$1
+	local string=$2
+
+	eval $file>temp 2>&1
+	if [ $? -eq 0 ]&&  grep -q "$string" temp; then
+		tst_res TPASS "Register and recognise a binary type successfully"
+	else
+		tst_res TFAIL "Fail to recognise a binary type"
+	fi
+}
+
+expect_unrecognised()
+{
+	local file=$1
+	local string=$2
+
+	eval $file>temp 2>&1

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 54

Quoted 10 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +10 -0
+	if [ $? -ne 0 ]&&  ! grep -q "$string" temp; then
+		tst_res TPASS "Fail to recognise a binary type"
+	else
+		tst_res TFAIL "Recognise a binary type successfully"
+	fi
+}
+
+verify_binfmt_misc()
+{
+	local delimiter=${1:0:1}
                           ^
			  This is bashism should be replaced for example
			  with $(echo "$a" | head -c1)
Quoted 6 lines

testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh line 58

Quoted 4 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +4 -0
+	local name=$(echo "$1" | awk -F $delimiter '{print $2}')
+	local ttype=$(echo "$1" | awk -F $delimiter '{print $3}')
+	local tfile=$2
+	local disabled=$3

Can't we just run each test twice once with enabled and once with disabled binfmt handler?

For matched binary types, we can run test twice by enabled and disabled binfmt handler.
For mismatched binary types, it seems enough to run test once by enabled binfmt handler.

Best Regards,
Xiao Yang

Quoted 87 lines
Quoted 87 lines
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +49 -0
+	local mntpoint=$(get_binfmt_misc_mntpoint)
+
+	(echo "$1">"$mntpoint/register") 2>/dev/null
+	if [ $? -ne 0 -o ! -f "$mntpoint/$name" ]; then
+		tst_res TFAIL "Fail to register a binary type"
+		return
+	fi
+
+	[ "$ttype" = "E" ]&&  local tstring="This is test for extension"
+	[ "$ttype" = "M" ]&&  local tstring="This is test for magic"
+
+	if [ "$disabled" = "1" ]; then
+		(echo 0>"$mntpoint/$name") 2>/dev/null
+		if [ $? -ne 0 ] || grep -q enable "$mntpoint/$name"; then
+			remove_binary_type "$mntpoint/$name"
+			tst_res TFAIL "Fail to disable a binary type"
+			return
+		fi
+	fi
+
+	[ -z "$disabled" ]&&  expect_recognised "$tfile" "$tstring"
+	[ -n "$disabled" ]&&  expect_unrecognised "$tfile" "$tstring"
+
+	remove_binary_type "$mntpoint/$name"
+}
+
+do_test()
+{
+	case $1 in
+	1) verify_binfmt_misc ":textension:E::extension::$(which perl):" \
+			      "$TST_DATAROOT/file.extension";;
+	2) verify_binfmt_misc ":tmagic:M:1:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic";;
+	3) verify_binfmt_misc ".textension.E..extension..$(which perl)." \
+			      "$TST_DATAROOT/file.extension";;
+	4) verify_binfmt_misc ",tmagic,M,1,print,,$(which perl)," \
+			      "$TST_DATAROOT/file.magic";;
+	5) verify_binfmt_misc ":textension:E::ltp::$(which perl):" \
+			      "$TST_DATAROOT/file.extension" "0";;
+	6) verify_binfmt_misc ":tmagic:M:0:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic" "0";;
+	7) verify_binfmt_misc ":textension:E::extension::$(which perl):" \
+			      "$TST_DATAROOT/file.extension" "1";;
+	8) verify_binfmt_misc ":tmagic:M:1:print::$(which perl):" \
+			      "$TST_DATAROOT/file.magic" "1";;
+	esac
+}
+
+tst_run
testcases/kernel/fs/binfmt_misc/datafiles/Makefile new file +13 -0
new file mode 100644
index 0000000..e6d1487
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang<[email protected]>
+
+top_srcdir              ?= ../../../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/binfmt_misc02
+INSTALL_TARGETS		:= file.extension file.magic
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/fs/binfmt_misc/datafiles/file.extension new file +1 -0
new file mode 100755
index 0000000..054ee07
@@ -0,0 +1 @@
+print "This is test for extension\n"
testcases/kernel/fs/binfmt_misc/datafiles/file.magic new file +1 -0
new file mode 100755
index 0000000..a018abf
@@ -0,0 +1 @@
+ print "This is test for magic\n"
Signature · 1 line
1.8.3.1
author
#4 lore raw

PATCH v2 2/2 fs/binfmt_misc02.sh: Add new test for basic functionality

In reply to Cyril Hrubis

Register a new binary type and then check if binfmt_misc recognises the binary type in some conditions.

---
 runtest/fs                                         |   1 +
 testcases/kernel/fs/binfmt_misc/Makefile           |   4 +-
 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh   | 107 +++++++++++++++++++++
 testcases/kernel/fs/binfmt_misc/datafiles/Makefile |  13 +++
 .../kernel/fs/binfmt_misc/datafiles/file.extension |   1 +
 .../kernel/fs/binfmt_misc/datafiles/file.magic     |   1 +
 6 files changed, 125 insertions(+), 2 deletions(-)
 create mode 100755 testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh
 create mode 100644 testcases/kernel/fs/binfmt_misc/datafiles/Makefile
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.extension
 create mode 100755 testcases/kernel/fs/binfmt_misc/datafiles/file.magic
runtest/fs +1 -0
index 227c186..ef2e848 100644
@@ -84,3 +84,4 @@ isofs isofs.sh
 fs_fill fs_fill
 
 binfmt_misc01 binfmt_misc01.sh
+binfmt_misc02 binfmt_misc02.sh
testcases/kernel/fs/binfmt_misc/Makefile +2 -2
index f9819ad..14437b5 100644
@@ -7,6 +7,6 @@ top_srcdir              ?= ../../../..
 
 include $(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc_lib.sh
+INSTALL_TARGETS         := binfmt_misc01.sh binfmt_misc02.sh binfmt_misc_lib.sh
 
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
testcases/kernel/fs/binfmt_misc/binfmt_misc02.sh new file +107 -0

107 lines not on this page · raw message

testcases/kernel/fs/binfmt_misc/datafiles/Makefile new file +13 -0
new file mode 100644
index 0000000..e6d1487
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
+# Author: Xiao Yang <[email protected]>
+
+top_srcdir              ?= ../../../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/binfmt_misc02
+INSTALL_TARGETS		:= file.extension file.magic
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
testcases/kernel/fs/binfmt_misc/datafiles/file.extension new file +1 -0
new file mode 100755
index 0000000..8468a8f
@@ -0,0 +1 @@
+This is test for extension
testcases/kernel/fs/binfmt_misc/datafiles/file.magic new file +1 -0
new file mode 100755
index 0000000..f2823b6
@@ -0,0 +1 @@
+ This is test for magic
Signature · 1 line
1.8.3.1