drm/i915/bios: ddi port parsing changes
Subsystems (2)
cover drm/i915/bios: ddi port parsing changes
Some prep work for future changes which will be easier with ddi port info being initialized in child device order instead of port order.
BR,
Jani.
Jani Nikula (3):
drm/i915/bios: iterate over child devices to initialize ddi_port_info drm/i915/bios: parse dsi devices in parse_ddi_ports() drm/i915/bios: parse ddi ports also on VLV
drivers/gpu/drm/i915/i915_drv.h | 2 + drivers/gpu/drm/i915/intel_bios.c | 113 +++++++++++++++++------------- 2 files changed, 66 insertions(+), 49 deletions(-)
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 1/3 drm/i915/bios: iterate over child devices to initialize ddi_port_info
Iterate over child devices instead of ports in parse_ddi_ports() to initialize dri_port_info. We'll eventually need to decide some stuff based on the child device order, which may be different from the port order.
As a bonus, this allows better abstractions for e.g. dvo port mapping.
There's a subtle change in the DDC pin and AUX channel sanitization as we change the order. Otherwise, this should not change behaviour.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 104 +++++++++++++++++------------- 2 files changed, 59 insertions(+), 46 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -946,6 +946,7 @@ struct ddi_vbt_port_info {#define HDMI_LEVEL_SHIFT_UNKNOWN 0xffu8 hdmi_level_shift; + u8 present:1; u8 supports_dvi:1; u8 supports_hdmi:1; u8 supports_dp:1;
drivers/gpu/drm/i915/intel_bios.c +58 -46
162 lines not on this page · raw message
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 1/3] drm/i915/bios: iterate over child devices to initialize ddi_port_info
Quoted 9 lines · Jani Nikula
Iterate over child devices instead of ports in
parse_ddi_ports()to initializedri_port_info. We'll eventually need to decide some stuff based on the child device order, which may be different from the port order.As a bonus, this allows better abstractions for e.g. dvo port mapping.
There's a subtle change in the DDC pin and AUX channel sanitization as we change the order. Otherwise, this should not change behaviour.
I have a feeling we had some odd cases with the port A vs. port E, but I think those were probably due to the non-VBT defaults for port A smashing into the VBT provided values of port E.
So yeah, I think (or at least hope) that this is fine.
Quoted 193 lines
Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 104 +++++++++++++++++------------- 2 files changed, 59 insertions(+), 46 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -946,6 +946,7 @@ struct ddi_vbt_port_info {#define HDMI_LEVEL_SHIFT_UNKNOWN 0xffu8 hdmi_level_shift; + u8 present:1; u8 supports_dvi:1; u8 supports_hdmi:1; u8 supports_dp:1;drivers/gpu/drm/i915/intel_bios.c +58
-46@@ -1222,10 +1222,11 @@ static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,if (!info->alternate_ddc_pin)return ; -for_each_port_masked (p, (1 << port) -1 ) { +for (p =PORT_A ; p <I915_MAX_PORTS ; p++) {struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; -if (info->alternate_ddc_pin != i->alternate_ddc_pin) +if (p == port || !i->present || + info->alternate_ddc_pin != i->alternate_ddc_pin)continue ; DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, "@@ -1239,8 +1240,8 @@ static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,* port. Otherwise they share the same ddc bin and * system couldn't communicate with them separately. * -* Due to parsing the ports in alphabetical order, -* a higher port will always clobber a lower one. +* Due to parsing the ports in child device order, +* a later device will always clobber an earlier one. */ i->supports_dvi = false; i->supports_hdmi = false;@@ -1258,10 +1259,11 @@ static void sanitize_aux_ch(struct drm_i915_private *dev_priv,if (!info->alternate_aux_channel)return ; -for_each_port_masked (p, (1 << port) -1 ) { +for (p =PORT_A ; p <I915_MAX_PORTS ; p++) {struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; -if (info->alternate_aux_channel != i->alternate_aux_channel) +if (p == port || !i->present || + info->alternate_aux_channel != i->alternate_aux_channel)continue ; DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, "@@ -1275,8 +1277,8 @@ static void sanitize_aux_ch(struct drm_i915_private *dev_priv,* port. Otherwise they share the same aux channel * and system couldn't communicate with them separately. * -* Due to parsing the ports in alphabetical order, -* a higher port will always clobber a lower one. +* Due to parsing the ports in child device order, +* a later device will always clobber an earlier one. */ i->supports_dp = false; i->alternate_aux_channel =0 ;@@ -1324,49 +1326,58 @@ static u8 map_ddc_pin(struct drm_i915_private *dev_priv, u8 vbt_pin)return 0 ; } -static void parse_ddi_port (struct drm_i915_private *dev_priv,enum port port, -u8 bdb_version) +static enum port dvo_port_to_port (u8 dvo_port) { -struct child_device_config *it, *child =NULL ; -struct ddi_vbt_port_info *info = &dev_priv->vbt.ddi_port_info[port]; -int i, j; -bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; -/* Each DDI port can have more than one value on the "DVO Port" field, +/* +* Each DDI port can have more than one value on the "DVO Port" field, * so look for all the possible values for each port. */ -int dvo_ports[][3 ] = { - {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, - {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, - {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, - {DVO_PORT_HDMID ,DVO_PORT_DPD ,-1 }, - {DVO_PORT_CRT ,DVO_PORT_HDMIE ,DVO_PORT_DPE }, - {DVO_PORT_HDMIF ,DVO_PORT_DPF ,-1 }, +static const int dvo_ports[][3 ] = { + [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, + [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, + [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, + [PORT_D ] = {DVO_PORT_HDMID ,DVO_PORT_DPD ,-1 }, + [PORT_E ] = {DVO_PORT_CRT ,DVO_PORT_HDMIE ,DVO_PORT_DPE }, + [PORT_F ] = {DVO_PORT_HDMIF ,DVO_PORT_DPF ,-1 }, }; +enum port port; +int i; -/* -* Find the first child device to reference the port, report if more -* than one found. -*/ -for (i =0 ; i < dev_priv->vbt.child_dev_num; i++) { - it = dev_priv->vbt.child_dev + i; - -for (j =0 ; j <3 ; j++) { -if (dvo_ports[port][j] ==-1 ) +for (port =PORT_A ; port <ARRAY_SIZE (dvo_ports); port++) { +for (i =0 ; i <ARRAY_SIZE (dvo_ports[port]); i++) { +if (dvo_ports[port][i] ==-1 )break ; -if (it->dvo_port == dvo_ports[port][j]) { -if (child) { -DRM_DEBUG_KMS ("More than one child device for port %c in VBT, using the first.\n" , -port_name (port)); - }else { - child = it; - } - } +if (dvo_port == dvo_ports[port][i]) +return port; } } -if (!child) + +return PORT_NONE ; +} + +static void parse_ddi_port (struct drm_i915_private *dev_priv, +const struct child_device_config *child, +u8 bdb_version) +{ +struct ddi_vbt_port_info *info; +bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; +enum port port; + + port =dvo_port_to_port (child->dvo_port); +if (port ==PORT_NONE )return ; + info = &dev_priv->vbt.ddi_port_info[port]; + +if (info->present) { +DRM_DEBUG_KMS ("More than one child device for port %c in VBT, using the first.\n" , +port_name (port)); +return ; + } + + info->present = true; + is_dvi = child->device_type &DEVICE_TYPE_TMDS_DVI_SIGNALING ; is_dp = child->device_type &DEVICE_TYPE_DISPLAYPORT_OUTPUT ; is_crt = child->device_type &DEVICE_TYPE_ANALOG_OUTPUT ;@@ -1498,19 +1509,20 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,static void parse_ddi_ports (struct drm_i915_private *dev_priv,u8 bdb_version) { -enum port port; +const struct child_device_config *child; +int i;if (!HAS_DDI (dev_priv) && !IS_CHERRYVIEW (dev_priv))return ; -if (!dev_priv->vbt.child_dev_num) -return ; -if (bdb_version <155 )return ; -for (port =PORT_A ; port <I915_MAX_PORTS ; port++) -parse_ddi_port (dev_priv, port, bdb_version); +for (i =0 ; i < dev_priv->vbt.child_dev_num; i++) { + child = dev_priv->vbt.child_dev + i; + +parse_ddi_port (dev_priv, child, bdb_version); + } } static voidSignature · 1 line
2.20.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/3 drm/i915/bios: parse dsi devices in parse_ddi_ports()
In reply to Jani NikulaFor the time being this is only for completeness and better debug logging of DSI ports.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 14 ++++++++------ 2 files changed, 9 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -951,6 +951,7 @@ struct ddi_vbt_port_info { u8 supports_hdmi:1; u8 supports_dp:1; u8 supports_edp:1; + u8 supports_dsi:1; u8 supports_typec_usb:1; u8 supports_tbt:1;
drivers/gpu/drm/i915/intel_bios.c +8 -6
@@ -1333,9 +1333,9 @@ static enum port dvo_port_to_port(u8 dvo_port)* so look for all the possible values for each port. */ static const int dvo_ports[][3 ] = { - [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, - [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, - [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, + [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,DVO_PORT_MIPIA }, + [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,DVO_PORT_MIPIB }, + [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,DVO_PORT_MIPIC }, [PORT_D ] = {DVO_PORT_HDMID ,DVO_PORT_DPD ,-1 }, [PORT_E ] = {DVO_PORT_CRT ,DVO_PORT_HDMIE ,DVO_PORT_DPE }, [PORT_F ] = {DVO_PORT_HDMIF ,DVO_PORT_DPF ,-1 },
@@ -1361,7 +1361,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, u8 bdb_version) {struct ddi_vbt_port_info *info; -bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; +bool is_dvi, is_hdmi, is_dp, is_edp, is_crt, is_dsi;enum port port; port =dvo_port_to_port (child->dvo_port);
@@ -1383,6 +1383,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, is_crt = child->device_type &DEVICE_TYPE_ANALOG_OUTPUT ; is_hdmi = is_dvi && (child->device_type &DEVICE_TYPE_NOT_HDMI_OUTPUT ) ==0 ; is_edp = is_dp && (child->device_type &DEVICE_TYPE_INTERNAL_CONNECTOR ); + is_dsi = child->device_type &DEVICE_TYPE_MIPI_OUTPUT ;if (port ==PORT_A && is_dvi) { DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n",
@@ -1395,6 +1396,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, info->supports_hdmi = is_hdmi; info->supports_dp = is_dp; info->supports_edp = is_edp; + info->supports_dsi = is_dsi;if (bdb_version >=195 ) info->supports_typec_usb = child->dp_usb_type_c;
@@ -1402,8 +1404,8 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,if (bdb_version >=209 ) info->supports_tbt = child->tbt; -DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d TCUSB:%d TBT:%d\n" , -port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_crt, +DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d DSI:%d CRT:%d TCUSB:%d TBT:%d\n" , +port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_dsi, is_crt, info->supports_typec_usb, info->supports_tbt);if (is_edp && is_dvi)
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/3] drm/i915/bios: parse dsi devices in parse_ddi_ports()
Quoted 26 lines · Jani Nikula
For the time being this is only for completeness and better debug logging of DSI ports.
Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 14 ++++++++------ 2 files changed, 9 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -951,6 +951,7 @@ struct ddi_vbt_port_info { u8 supports_hdmi:1; u8 supports_dp:1; u8 supports_edp:1; + u8 supports_dsi:1; u8 supports_typec_usb:1; u8 supports_tbt:1;drivers/gpu/drm/i915/intel_bios.c +0
-0
drivers/gpu/drm/i915/intel_bios.c static enum port dvo_port_to_port(u8 dvo_port) · line 1338
Quoted 9 lines
drivers/gpu/drm/i915/intel_bios.c +3
-3@@ -1333,9 +1333,9 @@ static enum port dvo_port_to_port(u8 dvo_port)* so look for all the possible values for each port. */ static const int dvo_ports[][3 ] = { - [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, - [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, - [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, + [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,DVO_PORT_MIPIA }, + [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,DVO_PORT_MIPIB }, + [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,DVO_PORT_MIPIC },
I wonder if this is going to end up badly on CHV...
Quoted 41 lines
drivers/gpu/drm/i915/intel_bios.c +5
-3[PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1}, [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE}, [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1},@@ -1361,7 +1361,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, u8 bdb_version) {struct ddi_vbt_port_info *info; -bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; +bool is_dvi, is_hdmi, is_dp, is_edp, is_crt, is_dsi;enum port port; port =dvo_port_to_port (child->dvo_port);@@ -1383,6 +1383,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, is_crt = child->device_type &DEVICE_TYPE_ANALOG_OUTPUT ; is_hdmi = is_dvi && (child->device_type &DEVICE_TYPE_NOT_HDMI_OUTPUT ) ==0 ; is_edp = is_dp && (child->device_type &DEVICE_TYPE_INTERNAL_CONNECTOR ); + is_dsi = child->device_type &DEVICE_TYPE_MIPI_OUTPUT ;if (port ==PORT_A && is_dvi) { DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n",@@ -1395,6 +1396,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, info->supports_hdmi = is_hdmi; info->supports_dp = is_dp; info->supports_edp = is_edp; + info->supports_dsi = is_dsi;if (bdb_version >=195 ) info->supports_typec_usb = child->dp_usb_type_c;@@ -1402,8 +1404,8 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,if (bdb_version >=209 ) info->supports_tbt = child->tbt; -DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d TCUSB:%d TBT:%d\n" , -port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_crt, +DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d DSI:%d CRT:%d TCUSB:%d TBT:%d\n" , +port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_dsi, is_crt, info->supports_typec_usb, info->supports_tbt);if (is_edp && is_dvi)Signature · 1 line
2.20.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/3] drm/i915/bios: parse dsi devices in parse_ddi_ports()
Quoted 22 lines · Ville Syrjälä
Quoted 21 lines · Jani Nikula
For the time being this is only for completeness and better debug logging of DSI ports.
Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 14 ++++++++------ 2 files changed, 9 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -951,6 +951,7 @@ struct ddi_vbt_port_info { u8 supports_hdmi:1; u8 supports_dp:1; u8 supports_edp:1; + u8 supports_dsi:1; u8 supports_typec_usb:1; u8 supports_tbt:1;
Quoted 16 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_bios.c +0
-0drivers/gpu/drm/i915/intel_bios.c static enum port dvo_port_to_port(u8 dvo_port) · line 1338
Quoted 9 lines
drivers/gpu/drm/i915/intel_bios.c +3
-3@@ -1333,9 +1333,9 @@ static enum port dvo_port_to_port(u8 dvo_port)* so look for all the possible values for each port. */ static const int dvo_ports[][3 ] = { - [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, - [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, - [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, + [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,DVO_PORT_MIPIA }, + [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,DVO_PORT_MIPIB }, + [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,DVO_PORT_MIPIC },I wonder if this is going to end up badly on CHV...
Yeah. We also have a bunch of these mapping tables, with various DVO_PORT_* combos. There's a certain appeal to consolidating them.
So I can't but wonder why we have duplicate information with child device type and child device specific port numbers. Is there a case where the distinction helps?
BR,
Jani.
Quoted 42 lines
Quoted 42 lines
drivers/gpu/drm/i915/intel_bios.c +5
-3[PORT_D] = { DVO_PORT_HDMID, DVO_PORT_DPD, -1}, [PORT_E] = { DVO_PORT_CRT, DVO_PORT_HDMIE, DVO_PORT_DPE}, [PORT_F] = { DVO_PORT_HDMIF, DVO_PORT_DPF, -1},@@ -1361,7 +1361,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, u8 bdb_version) {struct ddi_vbt_port_info *info; -bool is_dvi, is_hdmi, is_dp, is_edp, is_crt; +bool is_dvi, is_hdmi, is_dp, is_edp, is_crt, is_dsi;enum port port; port =dvo_port_to_port (child->dvo_port);@@ -1383,6 +1383,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, is_crt = child->device_type &DEVICE_TYPE_ANALOG_OUTPUT ; is_hdmi = is_dvi && (child->device_type &DEVICE_TYPE_NOT_HDMI_OUTPUT ) ==0 ; is_edp = is_dp && (child->device_type &DEVICE_TYPE_INTERNAL_CONNECTOR ); + is_dsi = child->device_type &DEVICE_TYPE_MIPI_OUTPUT ;if (port ==PORT_A && is_dvi) { DRM_DEBUG_KMS("VBT claims port A supports DVI%s, ignoring\n",@@ -1395,6 +1396,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, info->supports_hdmi = is_hdmi; info->supports_dp = is_dp; info->supports_edp = is_edp; + info->supports_dsi = is_dsi;if (bdb_version >=195 ) info->supports_typec_usb = child->dp_usb_type_c;@@ -1402,8 +1404,8 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv,if (bdb_version >=209 ) info->supports_tbt = child->tbt; -DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d CRT:%d TCUSB:%d TBT:%d\n" , -port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_crt, +DRM_DEBUG_KMS ("Port %c VBT info: DP:%d HDMI:%d DVI:%d EDP:%d DSI:%d CRT:%d TCUSB:%d TBT:%d\n" , +port_name (port), is_dp, is_hdmi, is_dvi, is_edp, is_dsi, is_crt, info->supports_typec_usb, info->supports_tbt);if (is_edp && is_dvi)Signature · 1 line
2.20.1
Signature · 5 lines
Jani Nikula, Intel Open Source Graphics Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/3] drm/i915/bios: parse dsi devices in parse_ddi_ports()
Quoted 40 lines · Jani Nikula
Quoted 22 lines · Ville Syrjälä
Quoted 21 lines · Jani Nikula
For the time being this is only for completeness and better debug logging of DSI ports.
Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 14 ++++++++------ 2 files changed, 9 insertions(+), 6 deletions(-)drivers/gpu/drm/i915/i915_drv.h +1
-0@@ -951,6 +951,7 @@ struct ddi_vbt_port_info { u8 supports_hdmi:1; u8 supports_dp:1; u8 supports_edp:1; + u8 supports_dsi:1; u8 supports_typec_usb:1; u8 supports_tbt:1;Quoted 16 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_bios.c +0
-0drivers/gpu/drm/i915/intel_bios.c static enum port dvo_port_to_port(u8 dvo_port) · line 1338
Quoted 9 lines
drivers/gpu/drm/i915/intel_bios.c +3
-3@@ -1333,9 +1333,9 @@ static enum port dvo_port_to_port(u8 dvo_port)* so look for all the possible values for each port. */ static const int dvo_ports[][3 ] = { - [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,-1 }, - [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,-1 }, - [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,-1 }, + [PORT_A ] = {DVO_PORT_HDMIA ,DVO_PORT_DPA ,DVO_PORT_MIPIA }, + [PORT_B ] = {DVO_PORT_HDMIB ,DVO_PORT_DPB ,DVO_PORT_MIPIB }, + [PORT_C ] = {DVO_PORT_HDMIC ,DVO_PORT_DPC ,DVO_PORT_MIPIC },I wonder if this is going to end up badly on CHV...
Quoted 6 lines
Yeah. We also have a bunch of these mapping tables, with various DVO_PORT_* combos. There's a certain appeal to consolidating them.
So I can't but wonder why we have duplicate information with child device type and child device specific port numbers. Is there a case where the distinction helps?
The one case I remeber is 7a17995a3dc8 ("drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT")
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 3/3 drm/i915/bios: parse ddi ports also on VLV
In reply to Jani NikulaThe main benefit is improved debug logging of the ports also on VLV.
--- drivers/gpu/drm/i915/intel_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_bios.c +2 -1
@@ -1514,7 +1514,8 @@ static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)const struct child_device_config *child;int i; -if (!HAS_DDI (dev_priv) && !IS_CHERRYVIEW (dev_priv)) +if (!HAS_DDI (dev_priv) && + !IS_CHERRYVIEW (dev_priv) && !IS_VALLEYVIEW (dev_priv))return ;if (bdb_version <155 )
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/3] drm/i915/bios: parse ddi ports also on VLV
Quoted 1 line · Jani Nikula
The main benefit is improved debug logging of the ports also on VLV.
The fact that this causes VLV to start using the AUX/DDC pins from VBT needs to be called out in the commit msg.
Quoted 22 lines
Signed-off-by Jani Nikula <[email protected]>--- drivers/gpu/drm/i915/intel_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_bios.c +2
-1@@ -1514,7 +1514,8 @@ static void parse_ddi_ports(struct drm_i915_private *dev_priv, u8 bdb_version)const struct child_device_config *child;int i; -if (!HAS_DDI (dev_priv) && !IS_CHERRYVIEW (dev_priv)) +if (!HAS_DDI (dev_priv) && + !IS_CHERRYVIEW (dev_priv) && !IS_VALLEYVIEW (dev_priv))return ;if (bdb_version <155 )Signature · 1 line
2.20.1
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for drm/i915/bios: ddi port parsing changes
In reply to Jani Nikula== Series Details ==
== Series Details ==
Series: drm/i915/bios: ddi port parsing changes
URL : https://patchwork.freedesktop.org/series/57651/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm/i915/bios: iterate over child devices to initialize ddi_port_info -drivers/gpu/drm/i915/selftests/../i915_drv.h:3548:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3549:16: warning: expression using sizeof(void)
Commit: drm/i915/bios: parse dsi devices in parse_ddi_ports() -drivers/gpu/drm/i915/selftests/../i915_drv.h:3549:16: warning: expression using sizeof(void) +drivers/gpu/drm/i915/selftests/../i915_drv.h:3550:16: warning: expression using sizeof(void)
Commit: drm/i915/bios: parse ddi ports also on VLV Okay!
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for drm/i915/bios: ddi port parsing changes
In reply to Jani Nikula== Series Details ==
== Series Details ==
Series: drm/i915/bios: ddi port parsing changes
URL : https://patchwork.freedesktop.org/series/57651/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5712 -> Patchwork_12395
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_12395 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_12395, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57651/revisions/1/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_12395:
### IGT changes ###
#### Possible regressions ####
* igt@i915_module_load@reload-with-fault-injection:
- fi-kbl-7560u: PASS -> INCOMPLETE
Known issues
------------
Here are the changes found in Patchwork_12395 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_basic@readonly-bsd2:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] +76
* igt@kms_busy@basic-flip-b:
- fi-gdg-551: PASS -> FAIL [fdo#103182]
* igt@kms_busy@basic-flip-c:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: PASS -> FAIL [fdo#103167]
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
Participating hosts (45 -> 40)
------------------------------
Additional (1): fi-pnv-d510
Missing (6): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-skl-lmem
Build changes
-------------
* Linux: CI_DRM_5712 -> Patchwork_12395
CI_DRM_5712: 5d4de376b9a03c2f74e049ee6a8221df96687ba0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4875: 91908d36d0d5c90eea86e29736d2748d5ec55335 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12395: 24aa5327f54f0d3d4dbfaed57d4b92a7b2d9d5a1 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
24aa5327f54f drm/i915/bios: parse ddi ports also on VLVdc783312f4fe drm/i915/bios: parse dsi devices in parse_ddi_ports() 0542ee4a7b9f drm/i915/bios: iterate over child devices to initialize ddi_port_info
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12395/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx