Input: ili2117a - Add support for Ilitek ILI2117A based touchscreens
Subsystems (2)
PATCH 1/1 Input: ili2117a - Add support for Ilitek ILI2117A based touchscreens
This driver supports the ILI2117A touch controller. This is different than the ILI210x and it uses different register and algorithm so it's a separate driver rather than integrating with the other.
Signed-off-by Adam Ford <[email protected]>
drivers/input/touchscreen/Kconfig +12 -0
@@ -416,6 +416,18 @@ config TOUCHSCREEN_ILI210X To compile this driver as a module, choose M here: the module will be called ili210x. +config TOUCHSCREEN_ILI2117A + tristate "Ilitek ILI2117A Multi-Touch Controller" + depends on I2C + help + Say Y here if you have a ILI2117A based touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili2117a. + config TOUCHSCREEN_IPROC tristate "IPROC touch panel driver support" depends on ARCH_BCM_IPROC || COMPILE_TEST
drivers/input/touchscreen/Makefile +1 -0
@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o +obj-$(CONFIG_TOUCHSCREEN_ILI2117A) += ili2117a.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o
drivers/input/touchscreen/ili2117a.c new file +308 -0
308 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 6 lines · Adam Ford
This driver supports the ILI2117A touch controller. This is different than the ILI210x and it uses different register and algorithm so it's a separate driver rather than integrating with the other.
It's been a few months, and I haven't seen any feedback, but I have received questions from people. Is there any chance this can get some review?
Thank you,
adam
Quoted 354 lines
Signed-off-by Adam Ford <[email protected]>drivers/input/touchscreen/Kconfig +12
-0@@ -416,6 +416,18 @@ config TOUCHSCREEN_ILI210X To compile this driver as a module, choose M here: the module will be called ili210x. +config TOUCHSCREEN_ILI2117A + tristate "Ilitek ILI2117A Multi-Touch Controller" + depends on I2C + help + Say Y here if you have a ILI2117A based touchscreen + controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili2117a. + config TOUCHSCREEN_IPROC tristate "IPROC touch panel driver support" depends on ARCH_BCM_IPROC || COMPILE_TESTdrivers/input/touchscreen/Makefile +1
-0@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o +obj-$(CONFIG_TOUCHSCREEN_ILI2117A) += ili2117a.o obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC) += imx6ul_tsc.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.odrivers/input/touchscreen/ili2117a.c new file +308
-1@@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/delay.h> +#include <linux/workqueue.h> + +#define MAX_TOUCHES 10 +#define DEFAULT_POLL_PERIOD 20 +#define MAX_X ((1 << 12) - 1) +#define MAX_Y ((1 << 12) - 1) + +/* Touchscreen commands */ +#define TOUCH_INFO 0x00 + +struct finger { +u8 xy; +u8 x; +u8 y; +u8 c_sum; +} __packed; + +struct touchdata { +u8 packet_id; +struct finger finger[MAX_TOUCHES ]; +u8 key; +u8 checksum; +} __packed; + + +struct ili2117a { +struct i2c_client *client; +struct input_dev *input; +bool (*get_pendown_state)(void ); +unsigned int poll_period; +struct delayed_work dwork; +int max_touch; +}; + +static int ili2117a_read_reg (struct i2c_client *client,u8 reg,void *buf, +size_t len) +{ +struct i2c_msg msg[2 ] = { + { + .addr = client->addr, + .flags =0 , + .len =1 , + .buf = ®, + }, + { + .addr = client->addr, + .flags =I2C_M_RD , + .len = len, + .buf = buf, + } + }; + +if (i2c_transfer (client->adapter, msg,2 ) !=2 ) { +dev_err (&client->dev,"i2c transfer failed\n" ); +return -EIO ; + } + +return 0 ; +} + +static bool ili2117a_report_events (struct input_dev *input, +const struct touchdata *touchdata, +int max_touch) +{ +int i; +bool touch; +bool pen_down =0 ; +u16 x =0xfff ; +u16 y =0xfff ; +const struct finger *finger; + +for (i =0 ; i < max_touch; i++) { + touch =0 ; +input_mt_slot (input, i); + finger = &touchdata->finger[i]; + + x = finger->x | (((finger->xy &0xf0 ) >>4 ) <<8 ); + y = finger->y | ((finger->xy &0x0f ) <<8 ); + +/* This driver returns 0xfff if there is no touch */ +if (x !=0xfff && y !=0xfff ) { + touch =1 ; + pen_down =1 ; + } + +input_mt_report_slot_state (input,MT_TOOL_FINGER , touch); + +if (touch) { +input_report_abs (input,ABS_MT_POSITION_X , x); +input_report_abs (input,ABS_MT_POSITION_Y , y); + } + } + +input_mt_report_pointer_emulation (input, false); +input_sync (input); +return pen_down; +} + +static void ili2117a_work (struct work_struct *work) +{ + struct ili2117a *priv = container_of(work, struct ili2117a, + dwork.work); +struct i2c_client *client = priv->client; +struct touchdata touchdata; +int error; +bool status; + + error =ili2117a_read_reg (client,TOUCH_INFO , + (uint8_t *) &touchdata,sizeof (touchdata)); + +if (error) { +dev_err (&client->dev, +"Unable to get touchdata, err = %d\n" , error); +return ; + } + + status =ili2117a_report_events (priv->input, &touchdata, + priv->max_touch); + +if (status) { +schedule_delayed_work (&priv->dwork, +msecs_to_jiffies (priv->poll_period)); + } +} + +static irqreturn_t ili2117a_irq (int irq,void *irq_data) +{ +struct ili2117a *priv = irq_data; + +schedule_delayed_work (&priv->dwork,0 ); + +return IRQ_HANDLED ; +} + +static struct attribute *ili2117a_attributes[] = { +NULL , +}; + +static const struct attribute_group ili2117a_attr_group = { + .attrs = ili2117a_attributes, +}; + +static int ili2117a_i2c_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +struct device *dev = &client->dev; +struct ili2117a *priv; +struct input_dev *input; +int error; +int poll_period; +int max_touch; + +if (client->irq <=0 ) { +dev_err (dev,"No IRQ!\n" ); +return -EINVAL ; + } + + priv =kzalloc (sizeof (*priv),GFP_KERNEL ); + input =input_allocate_device (); +if (!priv || !input) { + error = -ENOMEM ; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + + error =device_property_read_u32 (dev,"ili2117a,poll-period" , + &poll_period); + priv->poll_period = error ?DEFAULT_POLL_PERIOD : poll_period; + + error =device_property_read_u32 (dev,"ili2117a,max-touch" , + &max_touch); +if (max_touch >MAX_TOUCHES ) + max_touch =MAX_TOUCHES ; + priv->max_touch = error ?MAX_TOUCHES : max_touch; + +INIT_DELAYED_WORK (&priv->dwork, ili2117a_work); + +/* Setup input device */ + input->name ="ili2117a Touchscreen" ; + input->id.bustype =BUS_I2C ; + input->dev.parent = dev; + +__set_bit (EV_SYN , input->evbit); +__set_bit (EV_KEY , input->evbit); +__set_bit (EV_ABS , input->evbit); +__set_bit (BTN_TOUCH , input->keybit); + +/* Single touch */ +input_set_abs_params (input,ABS_X ,0 ,MAX_X ,0 ,0 ); +input_set_abs_params (input,ABS_Y ,0 ,MAX_Y ,0 ,0 ); + +/* Multi touch */ +input_mt_init_slots (input, priv->max_touch,0 ); +input_set_abs_params (input,ABS_MT_POSITION_X ,0 ,MAX_X ,0 ,0 ); +input_set_abs_params (input,ABS_MT_POSITION_Y ,0 ,MAX_Y ,0 ,0 ); + +i2c_set_clientdata (client, priv); + + error =devm_request_threaded_irq (dev, client->irq,NULL , + ili2117a_irq, +IRQF_TRIGGER_RISING |IRQF_ONESHOT , + client->name, priv); + +if (error) { +dev_err (dev,"Failed to request irq, err: %d\n" , error); + goto err_free_mem; + } + + error =sysfs_create_group (&dev->kobj, &ili2117a_attr_group); +if (error) { +dev_err (dev,"Unable to create sysfs attributes, err: %d\n" , + error); + goto err_free_irq; + } + + error =input_register_device (priv->input); +if (error) { +dev_err (dev,"Cannot register input device, err: %d\n" , error); + goto err_remove_sysfs; + } + +device_init_wakeup (dev,1 ); +return 0 ; + +err_remove_sysfs: +sysfs_remove_group (&dev->kobj, &ili2117a_attr_group); +err_free_irq: +free_irq (client->irq, priv); +err_free_mem: +input_free_device (input); +kfree (priv); +return error; +} + +static int ili2117a_i2c_remove (struct i2c_client *client) +{ +struct ili2117a *priv =i2c_get_clientdata (client); + +sysfs_remove_group (&client->dev.kobj, &ili2117a_attr_group); +free_irq (priv->client->irq, priv); +cancel_delayed_work_sync (&priv->dwork); +input_unregister_device (priv->input); +kfree (priv); + +return 0 ; +} + +static int __maybe_unused ili2117a_i2c_suspend (struct device *dev) +{ +struct i2c_client *client =to_i2c_client (dev); + +if (device_may_wakeup (&client->dev)) +enable_irq_wake (client->irq); + +return 0 ; +} + +static int __maybe_unused ili2117a_i2c_resume (struct device *dev) +{ +struct i2c_client *client =to_i2c_client (dev); + +if (device_may_wakeup (&client->dev)) +disable_irq_wake (client->irq); + +return 0 ; +} + +static SIMPLE_DEV_PM_OPS(ili2117a_i2c_pm, + ili2117a_i2c_suspend, ili2117a_i2c_resume); + +static const struct of_device_id ili_match_table[] = { + { .compatible ="ilitek,ili2117a" }, + { }, +}; + +static const struct i2c_device_id ili2117a_i2c_id[] = { + {"ili2117a" ,0 }, + { } +}; +MODULE_DEVICE_TABLE (i2c, ili2117a_i2c_id); + +static struct i2c_driver ili2117a_ts_driver = { + .driver = { + .name ="ili2117a_i2c" , + .pm = &ili2117a_i2c_pm, + .of_match_table =of_match_ptr (ili_match_table), + }, + .id_table = ili2117a_i2c_id, + .probe = ili2117a_i2c_probe, + .remove = ili2117a_i2c_remove, +}; + +module_i2c_driver (ili2117a_ts_driver); + +MODULE_AUTHOR ("Adam Ford <[email protected]>" ); +MODULE_DESCRIPTION ("ili2117a I2C Touchscreen Driver" ); +MODULE_LICENSE ("GPL" ); --2.17.1