Skip to contentSkip to conversation

clk: sunxi: A31: Fix wrong AHB gate number

PATCH New Sasha Levin 1 participant 24 messages Mar 13, 2019

Subsystems (10)
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/24 clk: sunxi: A31: Fix wrong AHB gate number

From: Andre Przywara <[email protected]>

[ Upstream commit ee0b27a3a4da0b0ed2318aa092f8856896e9450b ]

According to the manual the gate clock for MMC3 is at bit 11, and NAND1 is controlled by bit 12.

Fix the gate bit definitions in the clock driver.

Fixes c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/sunxi-ng/ccu-sun6i-a31.c +2 -2
index 6ea5401e6881..7f1281298651 100644
@@ -252,9 +252,9 @@ static SUNXI_CCU_GATE(ahb1_mmc1_clk,	"ahb1-mmc1",	"ahb1",
 static SUNXI_CCU_GATE(ahb1_mmc2_clk,	"ahb1-mmc2",	"ahb1",
 		      0x060, BIT(10), 0);
 static SUNXI_CCU_GATE(ahb1_mmc3_clk,	"ahb1-mmc3",	"ahb1",
-		      0x060, BIT(12), 0);
+		      0x060, BIT(11), 0);
 static SUNXI_CCU_GATE(ahb1_nand1_clk,	"ahb1-nand1",	"ahb1",
-		      0x060, BIT(13), 0);
+		      0x060, BIT(12), 0);
 static SUNXI_CCU_GATE(ahb1_nand0_clk,	"ahb1-nand0",	"ahb1",
 		      0x060, BIT(13), 0);
 static SUNXI_CCU_GATE(ahb1_sdram_clk,	"ahb1-sdram",	"ahb1",
Signature · 1 line
2.19.1
author maintainer
#1 lore raw

PATCH 2/24 ARM: 8824/1: fix a migrating irq bug when hotplug cpu

From: Dietmar Eggemann <[email protected]>

[ Upstream commit 1b5ba350784242eb1f899bcffd95d2c7cff61e84 ]

Arm TC2 fails cpu hotplug stress test.

This issue was tracked down to a missing copy of the new affinity cpumask for the vexpress-spc interrupt into struct irq_common_data.affinity when the interrupt is migrated in migrate_one_irq().

Fix it by replacing the arm specific hotplug cpu migration with the generic irq code.

This is the counterpart implementation to commit 217d453d473c ("arm64:
fix a migrating irq bug when hotplug cpu").

Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y). The vexpress-spc interrupt (irq=22) on this board is affine to CPU0. Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when CPU0 is hotplugged out.

---
 arch/arm/Kconfig           |  1 +
 arch/arm/include/asm/irq.h |  1 -
 arch/arm/kernel/irq.c      | 62 --------------------------------------
 arch/arm/kernel/smp.c      |  2 +-
 4 files changed, 2 insertions(+), 64 deletions(-)
arch/arm/Kconfig +1 -0
index b5d529fdffab..74a70f91b01a 100644
@@ -1457,6 +1457,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
arch/arm/include/asm/irq.h +0 -1
index e53638c8ed8a..61e1d089ce1a 100644
@@ -24,7 +24,6 @@
 #ifndef __ASSEMBLY__
 struct irqaction;
 struct pt_regs;
-extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
arch/arm/kernel/irq.c +0 -62

71 lines not on this page · raw message

arch/arm/kernel/smp.c +1 -1
index 8faf869e9fb2..bc83ec7ed53f 100644
@@ -253,7 +253,7 @@ int __cpu_disable(void)
 	/*
 	 * OK - migrate IRQs away from this CPU
 	 */
-	migrate_irqs();
+	irq_migrate_all_off_this_cpu();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
Signature · 1 line
2.19.1
author maintainer
#2 lore raw

PATCH 3/24 assoc_array: Fix shortcut creation

In reply to Sasha Levin

From: David Howells <[email protected]>

[ Upstream commit bb2ba2d75a2d673e76ddaf13a9bd30d6a8b1bb08 ]

Fix the creation of shortcuts for which the length of the index key value is an exact multiple of the machine word size. The problem is that the code that blanks off the unused bits of the shortcut value malfunctions if the number of bits in the last word equals machine word size. This is due to the "<<" operator being given a shift of zero in this case, and so the mask that should be all zeros is all ones instead. This causes the subsequent masking operation to clear everything rather than clearing nothing.

Ordinarily, the presence of the hash at the beginning of the tree index key makes the issue very hard to test for, but in this case, it was encountered due to a development mistake that caused the hash output to be either 0 (keyring) or 1 (non-keyring) only. This made it susceptible to the keyctl/unlink/valid test in the keyutils package.

The fix is simply to skip the blanking if the shift would be 0. For example, an index key that is 64 bits long would produce a 0 shift and thus a 'blank' of all 1s. This would then be inverted and AND'd onto the index_key, incorrectly clearing the entire last word.

Fixes 3cb989501c26 ("Add a generic associative array implementation.")
---
 lib/assoc_array.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
lib/assoc_array.c +5 -3
index 5cd093589c5a..3b46c5433b7a 100644
@@ -781,9 +781,11 @@ static bool assoc_array_insert_into_terminal_node(struct assoc_array_edit *edit,
 		new_s0->index_key[i] =
 			ops->get_key_chunk(index_key, i * ASSOC_ARRAY_KEY_CHUNK_SIZE);
 
-	blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
-	pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
-	new_s0->index_key[keylen - 1] &= ~blank;
+	if (level & ASSOC_ARRAY_KEY_CHUNK_MASK) {
+		blank = ULONG_MAX << (level & ASSOC_ARRAY_KEY_CHUNK_MASK);
+		pr_devel("blank off [%zu] %d: %lx\n", keylen - 1, level, blank);
+		new_s0->index_key[keylen - 1] &= ~blank;
+	}
 
 	/* This now reduces to a node splitting exercise for which we'll need
 	 * to regenerate the disparity table.
Signature · 1 line
2.19.1
author maintainer
#3 lore raw

PATCH 4/24 scsi: libiscsi: Fix race between iscsi_xmit_task and iscsi_complete_task

In reply to Sasha Levin

From: Anoob Soman <[email protected]>

[ Upstream commit 79edd00dc6a96644d76b4a1cb97d94d49e026768 ]

When a target sends Check Condition, whilst initiator is busy xmiting re-queued data, could lead to race between iscsi_complete_task() and iscsi_xmit_task() and eventually crashing with the following kernel backtrace.

[3326150.987523] ALERT: BUG: unable to handle kernel NULL pointer dereference at 0000000000000078
[3326150.987549] ALERT: IP: [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987571] WARN: PGD 569c8067 PUD 569c9067 PMD 0
[3326150.987582] WARN: Oops: 0002 [#1] SMP
[3326150.987593] WARN: Modules linked in: tun nfsv3 nfs fscache dm_round_robin
[3326150.987762] WARN: CPU: 2 PID: 8399 Comm: kworker/u32:1 Tainted: G O 4.4.0+2 #1
[3326150.987774] WARN: Hardware name: Dell Inc. PowerEdge R720/0W7JN5, BIOS 2.5.4 01/22/2016
[3326150.987790] WARN: Workqueue: iscsi_q_13 iscsi_xmitworker [libiscsi]
[3326150.987799] WARN: task: ffff8801d50f3800 ti: ffff8801f5458000 task.ti: ffff8801f5458000
[3326150.987810] WARN: RIP: e030:[<ffffffffa05ce70d>] [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.987825] WARN: RSP: e02b:ffff8801f545bdb0 EFLAGS: 00010246
[3326150.987831] WARN: RAX: 00000000ffffffc3 RBX: ffff880282d2ab20 RCX: ffff88026b6ac480
[3326150.987842] WARN: RDX: 0000000000000000 RSI: 00000000fffffe01 RDI: ffff880282d2ab20
[3326150.987852] WARN: RBP: ffff8801f545bdc8 R08: 0000000000000000 R09: 0000000000000008
[3326150.987862] WARN: R10: 0000000000000000 R11: 000000000000fe88 R12: 0000000000000000
[3326150.987872] WARN: R13: ffff880282d2abe8 R14: ffff880282d2abd8 R15: ffff880282d2ac08
[3326150.987890] WARN: FS: 00007f5a866b4840(0000) GS:ffff88028a640000(0000) knlGS:0000000000000000
[3326150.987900] WARN: CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[3326150.987907] WARN: CR2: 0000000000000078 CR3: 0000000070244000 CR4: 0000000000042660
[3326150.987918] WARN: Stack:
[3326150.987924] WARN: ffff880282d2ad58 ffff880282d2ab20 ffff880282d2abe8 ffff8801f545be18
[3326150.987938] WARN: ffffffffa05cea90 ffff880282d2abf8 ffff88026b59cc80 ffff88026b59cc00
[3326150.987951] WARN: ffff88022acf32c0 ffff880289491800 ffff880255a80800 0000000000000400
[3326150.987964] WARN: Call Trace:
[3326150.987975] WARN: [<ffffffffa05cea90>] iscsi_xmitworker+0x2f0/0x360 [libiscsi]
[3326150.987988] WARN: [<ffffffff8108862c>] process_one_work+0x1fc/0x3b0
[3326150.987997] WARN: [<ffffffff81088f95>] worker_thread+0x2a5/0x470
[3326150.988006] WARN: [<ffffffff8159cad8>] ? __schedule+0x648/0x870
[3326150.988015] WARN: [<ffffffff81088cf0>] ? rescuer_thread+0x300/0x300
[3326150.988023] WARN: [<ffffffff8108ddf5>] kthread+0xd5/0xe0
[3326150.988031] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988040] WARN: [<ffffffff815a0bcf>] ret_from_fork+0x3f/0x70
[3326150.988048] WARN: [<ffffffff8108dd20>] ? kthread_stop+0x110/0x110
[3326150.988127] ALERT: RIP [<ffffffffa05ce70d>] iscsi_xmit_task+0x2d/0xc0 [libiscsi]
[3326150.988138] WARN: RSP <ffff8801f545bdb0>
[3326150.988144] WARN: CR2: 0000000000000078
[3326151.020366] WARN: ---[ end trace 1c60974d4678d81b ]---

Commit 6f8830f5bbab ("scsi: libiscsi: add lock around task lists to fix list corruption regression") introduced "taskqueuelock" to fix list corruption during the race, but this wasn't enough.

Re-setting of conn->task to NULL, could race with iscsi_xmit_task(). iscsi_complete_task()

{
    ....
    if (conn->task == task)
        conn->task = NULL;
}

conn->task in iscsi_xmit_task() could be NULL and so will be task. __iscsi_get_task(task) will crash (NullPtr de-ref), trying to access refcount.

iscsi_xmit_task()

{
    struct iscsi_task *task = conn->task;

    __iscsi_get_task(task);
}

This commit will take extra conn->session->back_lock in iscsi_xmit_task() to ensure iscsi_xmit_task() waits for iscsi_complete_task(), if iscsi_complete_task() wins the race. If iscsi_xmit_task() wins the race, iscsi_xmit_task() increments task->refcount
(__iscsi_get_task) ensuring iscsi_complete_task() will not iscsi_free_task().

---
 drivers/scsi/libiscsi.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/scsi/libiscsi.c +6 -0
index c79743de48f9..2ffe10453e30 100644
@@ -1448,7 +1448,13 @@ static int iscsi_xmit_task(struct iscsi_conn *conn)
 	if (test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx))
 		return -ENODATA;
 
+	spin_lock_bh(&conn->session->back_lock);
+	if (conn->task == NULL) {
+		spin_unlock_bh(&conn->session->back_lock);
+		return -ENODATA;
+	}
 	__iscsi_get_task(task);
+	spin_unlock_bh(&conn->session->back_lock);
 	spin_unlock_bh(&conn->session->frwd_lock);
 	rc = conn->session->tt->xmit_task(task);
 	spin_lock_bh(&conn->session->frwd_lock);
Signature · 8 lines
2.19.1

-- 
You received this message because you are subscribed to the Google Groups "open-iscsi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-iscsi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected]
To post to this group, send email to open-iscsi-/JYPxA39Uh5TLH3MbocFF+G/[email protected]
Visit this group at https://groups.google.com/group/open-iscsi.
For more options, visit https://groups.google.com/d/optout.
author maintainer
#4 lore raw

PATCH 5/24 net: systemport: Fix reception of BPDUs

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit a40061ea2e39494104602b3048751341bda374a1 ]

SYSTEMPORT has its RXCHK parser block that attempts to validate the packet structures, unfortunately setting the L2 header check bit will cause Bridge PDUs (BPDUs) to be incorrectly rejected because they look like LLC/SNAP packets with a non-IPv4 or non-IPv6 Ethernet Type.

Fixes 4e8aedfe78c7 ("net: systemport: Turn on offloads by default")
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/broadcom/bcmsysport.c +4 -0
index 53a506b0d790..95874c10c23b 100644
@@ -104,6 +104,10 @@ static int bcm_sysport_set_rx_csum(struct net_device *dev,
 
 	priv->rx_chk_en = !!(wanted & NETIF_F_RXCSUM);
 	reg = rxchk_readl(priv, RXCHK_CONTROL);
+	/* Clear L2 header checks, which would prevent BPDUs
+	 * from being received.
+	 */
+	reg &= ~RXCHK_L2_HDR_DIS;
 	if (priv->rx_chk_en)
 		reg |= RXCHK_EN;
 	else
Signature · 1 line
2.19.1
author maintainer
#5 lore raw

PATCH 6/24 pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pins

In reply to Sasha Levin

From: Martin Blumenstingl <[email protected]>

[ Upstream commit c17abcfa93bf0be5e48bb011607d237ac2bfc839 ]

Fix the mismatch between the "sdxc_d13_1_a" pin group definition from meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a"). This makes it possible to use "sdxc_d13_1_a" in device-tree files to route the MMC data 1..3 pins to GPIOX_1..3.

Fixes 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b")
---
 drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/meson/pinctrl-meson8b.c +1 -1
index cbe5f5cbddb8..e1b689f840ab 100644
@@ -662,7 +662,7 @@ static const char * const sd_a_groups[] = {
 
 static const char * const sdxc_a_groups[] = {
 	"sdxc_d0_0_a", "sdxc_d13_0_a", "sdxc_d47_a", "sdxc_clk_a",
-	"sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d0_13_1_a"
+	"sdxc_cmd_a", "sdxc_d0_1_a", "sdxc_d13_1_a"
 };
 
 static const char * const pcm_a_groups[] = {
Signature · 1 line
2.19.1
author maintainer
#6 lore raw

PATCH 7/24 qmi_wwan: apply SET_DTR quirk to Sierra WP7607

In reply to Sasha Levin

From: Beniamino Galvani <[email protected]>

[ Upstream commit 97dc47a1308a3af46a09b1546cfb869f2e382a81 ]

The 1199:68C0 USB ID is reused by Sierra WP7607 which requires the DTR quirk to be detected. Apply QMI_QUIRK_SET_DTR unconditionally as already done for other IDs shared between different devices.

---
 drivers/net/usb/qmi_wwan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/usb/qmi_wwan.c +2 -2
index 134eb184fa22..16e5c8cd104d 100644
@@ -895,8 +895,8 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x114f, 0x68a2, 8)},    /* Sierra Wireless MC7750 */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 8)},	/* Sierra Wireless MC7710 in QMI mode */
 	{QMI_FIXED_INTF(0x1199, 0x68a2, 19)},	/* Sierra Wireless MC7710 in QMI mode */
-	{QMI_FIXED_INTF(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354 */
-	{QMI_FIXED_INTF(0x1199, 0x68c0, 10)},	/* Sierra Wireless MC7304/MC7354 */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)},	/* Sierra Wireless MC7304/MC7354, WP76xx */
+	{QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
 	{QMI_FIXED_INTF(0x1199, 0x901c, 8)},    /* Sierra Wireless EM7700 */
 	{QMI_FIXED_INTF(0x1199, 0x901f, 8)},    /* Sierra Wireless EM7355 */
 	{QMI_FIXED_INTF(0x1199, 0x9041, 8)},	/* Sierra Wireless MC7305/MC7355 */
Signature · 1 line
2.19.1
author maintainer
#7 lore raw

PATCH 8/24 net: mv643xx_eth: disable clk on error path in mv643xx_eth_shared_probe()

In reply to Sasha Levin

From: Alexey Khoroshilov <[email protected]>

[ Upstream commit e928b5d6b75e239feb9c6d5488974b6646a0ebc8 ]

If mv643xx_eth_shared_of_probe() fails, mv643xx_eth_shared_probe() leaves clk enabled.

Found by Linux Driver Verification project (linuxtesting.org).

---
 drivers/net/ethernet/marvell/mv643xx_eth.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/net/ethernet/marvell/mv643xx_eth.c +6 -1
index 5b12022adf1f..526d07e02bbc 100644
@@ -2886,7 +2886,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 
 	ret = mv643xx_eth_shared_of_probe(pdev);
 	if (ret)
-		return ret;
+		goto err_put_clk;
 	pd = dev_get_platdata(&pdev->dev);
 
 	msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
@@ -2894,6 +2894,11 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	infer_hw_params(msp);
 
 	return 0;
+
+err_put_clk:
+	if (!IS_ERR(msp->clk))
+		clk_disable_unprepare(msp->clk);
+	return ret;
 }
 
 static int mv643xx_eth_shared_remove(struct platform_device *pdev)
Signature · 1 line
2.19.1
author maintainer
#8 lore raw

PATCH 9/24 ASoC: topology: free created components in tplg load error

In reply to Sasha Levin

From: Bard liao <[email protected]>

[ Upstream commit 304017d31df36fb61eb2ed3ebf65fb6870b3c731 ]

Topology resources are no longer needed if any element failed to load.

---
 sound/soc/soc-topology.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
sound/soc/soc-topology.c +7 -1
index d6b48c796bfc..086fe4d27f60 100644
@@ -1989,6 +1989,7 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
 	struct snd_soc_tplg_ops *ops, const struct firmware *fw, u32 id)
 {
 	struct soc_tplg tplg;
+	int ret;
 
 	/* setup parsing context */
 	memset(&tplg, 0, sizeof(tplg));
@@ -2002,7 +2003,12 @@ int snd_soc_tplg_component_load(struct snd_soc_component *comp,
 	tplg.bytes_ext_ops = ops->bytes_ext_ops;
 	tplg.bytes_ext_ops_count = ops->bytes_ext_ops_count;
 
-	return soc_tplg_load(&tplg);
+	ret = soc_tplg_load(&tplg);
+	/* free the created components if fail to load topology */
+	if (ret)
+		snd_soc_tplg_component_remove(comp, SND_SOC_TPLG_INDEX_ALL);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(snd_soc_tplg_component_load);
 
Signature · 1 line
2.19.1
author maintainer
#9 lore raw

PATCH 10/24 arm64: Relax GIC version check during early boot

In reply to Sasha Levin

From: Vladimir Murzin <[email protected]>

[ Upstream commit 74698f6971f25d045301139413578865fc2bd8f9 ]

Updates to the GIC architecture allow ID_AA64PFR0_EL1.GIC to have values other than 0 or 1. At the moment, Linux is quite strict in the way it handles this field at early boot stage (cpufeature is fine) and will refuse to use the system register CPU interface if it doesn't find the value 1.

Fixes 021f653791ad17e03f98aaa7fb933816ae16f161 ("irqchip: gic-v3: Initial support for GICv3")
---
 arch/arm64/kernel/head.S | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm64/kernel/head.S +1 -2
index 3289d1458791..db6ff1944c41 100644
@@ -534,8 +534,7 @@ set_hcr:
 	/* GICv3 system register access */
 	mrs	x0, id_aa64pfr0_el1
 	ubfx	x0, x0, #24, #4
-	cmp	x0, #1
-	b.ne	3f
+	cbz	x0, 3f
 
 	mrs_s	x0, ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
Signature · 1 line
2.19.1
author maintainer
#10 lore raw

PATCH 11/24 net: marvell: mvneta: fix DMA debug warning

In reply to Sasha Levin

From: Russell King <[email protected]>

[ Upstream commit a8fef9ba58c9966ddb1fec916d8d8137c9d8bc89 ]

Booting 4.20 on SolidRun Clearfog issues this warning with DMA API debug enabled:

WARNING: CPU: 0 PID: 555 at kernel/dma/debug.c:1230 check_sync+0x514/0x5bc
mvneta f1070000.ethernet: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000002dd7dc00] [size=240 bytes]
Modules linked in: ahci mv88e6xxx dsa_core xhci_plat_hcd xhci_hcd devlink armada_thermal marvell_cesa des_generic ehci_orion phy_armada38x_comphy mcp3021 spi_orion evbug sfp mdio_i2c ip_tables x_tables
CPU: 0 PID: 555 Comm: bridge-network- Not tainted 4.20.0+ #291
Hardware name: Marvell Armada 380/385 (Device Tree)
[<c0019638>] (unwind_backtrace) from [<c0014888>] (show_stack+0x10/0x14)
[<c0014888>] (show_stack) from [<c07f54e0>] (dump_stack+0x9c/0xd4)
[<c07f54e0>] (dump_stack) from [<c00312bc>] (__warn+0xf8/0x124)
[<c00312bc>] (__warn) from [<c00313b0>] (warn_slowpath_fmt+0x38/0x48)
[<c00313b0>] (warn_slowpath_fmt) from [<c00b0370>] (check_sync+0x514/0x5bc)
[<c00b0370>] (check_sync) from [<c00b04f8>] (debug_dma_sync_single_range_for_cpu+0x6c/0x74)
[<c00b04f8>] (debug_dma_sync_single_range_for_cpu) from [<c051bd14>] (mvneta_poll+0x298/0xf58)
[<c051bd14>] (mvneta_poll) from [<c0656194>] (net_rx_action+0x128/0x424)
[<c0656194>] (net_rx_action) from [<c000a230>] (__do_softirq+0xf0/0x540)
[<c000a230>] (__do_softirq) from [<c00386e0>] (irq_exit+0x124/0x144)
[<c00386e0>] (irq_exit) from [<c009b5e0>] (__handle_domain_irq+0x58/0xb0)
[<c009b5e0>] (__handle_domain_irq) from [<c03a63c4>] (gic_handle_irq+0x48/0x98)
[<c03a63c4>] (gic_handle_irq) from [<c0009a10>] (__irq_svc+0x70/0x98)

...

This appears to be caused by mvneta_rx_hwbm() calling dma_sync_single_range_for_cpu() with the wrong struct device pointer, as the buffer manager device pointer is used to map and unmap the buffer. Fix this.

---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/marvell/mvneta.c +1 -1
index c92ffdf91065..d98b874a7238 100644
@@ -2050,7 +2050,7 @@ static int mvneta_rx_hwbm(struct mvneta_port *pp, int rx_todo,
 			if (unlikely(!skb))
 				goto err_drop_frame_ret_pool;
 
-			dma_sync_single_range_for_cpu(dev->dev.parent,
+			dma_sync_single_range_for_cpu(&pp->bm_priv->pdev->dev,
 			                              rx_desc->buf_phys_addr,
 			                              MVNETA_MH_SIZE + NET_SKB_PAD,
 			                              rx_bytes,
Signature · 1 line
2.19.1
author maintainer
#11 lore raw

PATCH 12/24 kasan, slub: move kasan_poison_slab hook before page_address

In reply to Sasha Levin

From: Andrey Konovalov <[email protected]>

[ Upstream commit a71012242837fe5e67d8c999cfc357174ed5dba0 ]

With tag based KASAN page_address() looks at the page flags to see whether the resulting pointer needs to have a tag set. Since we don't want to set a tag when page_address() is called on SLAB pages, we call page_kasan_tag_reset() in kasan_poison_slab(). However in allocate_slab() page_address() is called before kasan_poison_slab(). Fix it by changing the order.

---
 mm/slub.c | 19 +++++++++++++++----
 1 file changed, 15 insertions(+), 4 deletions(-)
mm/slub.c +15 -4
index 131dee87a67c..979400b1a781 100644
@@ -1052,6 +1052,16 @@ static void setup_object_debug(struct kmem_cache *s, struct page *page,
 	init_tracking(s, object);
 }
 
+static void setup_page_debug(struct kmem_cache *s, void *addr, int order)
+{
+	if (!(s->flags & SLAB_POISON))
+		return;
+
+	metadata_access_enable();
+	memset(addr, POISON_INUSE, PAGE_SIZE << order);
+	metadata_access_disable();
+}
+
 static inline int alloc_consistency_checks(struct kmem_cache *s,
 					struct page *page,
 					void *object, unsigned long addr)
@@ -1269,6 +1279,8 @@ unsigned long kmem_cache_flags(unsigned long object_size,
 #else /* !CONFIG_SLUB_DEBUG */
 static inline void setup_object_debug(struct kmem_cache *s,
 			struct page *page, void *object) {}
+static inline void setup_page_debug(struct kmem_cache *s,
+			void *addr, int order) {}
 
 static inline int alloc_debug_processing(struct kmem_cache *s,
 	struct page *page, void *object, unsigned long addr) { return 0; }
@@ -1584,12 +1596,11 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
 	if (page_is_pfmemalloc(page))
 		SetPageSlabPfmemalloc(page);
 
-	start = page_address(page);
+	kasan_poison_slab(page);
 
-	if (unlikely(s->flags & SLAB_POISON))
-		memset(start, POISON_INUSE, PAGE_SIZE << order);
+	start = page_address(page);
 
-	kasan_poison_slab(page);
+	setup_page_debug(s, start, order);
 
 	shuffle = shuffle_freelist(s, page);
 
Signature · 1 line
2.19.1
author maintainer
#12 lore raw

PATCH 13/24 tmpfs: fix link accounting when a tmpfile is linked in

In reply to Sasha Levin

From: "Darrick J. Wong" <[email protected]>

[ Upstream commit 1062af920c07f5b54cf5060fde3339da6df0cf6b ]

tmpfs has a peculiarity of accounting hard links as if they were separate inodes: so that when the number of inodes is limited, as it is by default, a user cannot soak up an unlimited amount of unreclaimable dcache memory just by repeatedly linking a file.

But when v3.11 added O_TMPFILE, and the ability to use linkat() on the fd, we missed accommodating this new case in tmpfs: "df -i" shows that an extra "inode" remains accounted after the file is unlinked and the fd closed and the actual inode evicted. If a user repeatedly links tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they are deleted.

Just skip the extra reservation from shmem_link() in this case: there's a sense in which this first link of a tmpfile is then cheaper than a hard link of another file, but the accounting works out, and there's still good limiting, so no need to do anything more complicated.

---
 mm/shmem.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
mm/shmem.c +7 -3
index 9b17bd4cbc5e..214773472530 100644
@@ -2902,10 +2902,14 @@ static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentr
 	 * No ordinary (disk based) filesystem counts links as inodes;
 	 * but each new link needs a new dentry, pinning lowmem, and
 	 * tmpfs dentries cannot be pruned until they are unlinked.
+	 * But if an O_TMPFILE file is linked into the tmpfs, the
+	 * first link must skip that, to get the accounting right.
 	 */
-	ret = shmem_reserve_inode(inode->i_sb);
-	if (ret)
-		goto out;
+	if (inode->i_nlink) {
+		ret = shmem_reserve_inode(inode->i_sb);
+		if (ret)
+			goto out;
+	}
 
 	dir->i_size += BOGO_DIRENT_SIZE;
 	inode->i_ctime = dir->i_ctime = dir->i_mtime = current_time(inode);
Signature · 1 line
2.19.1
author maintainer
#13 lore raw

PATCH 14/24 kasan, slab: fix conflicts with CONFIG_HARDENED_USERCOPY

In reply to Sasha Levin

From: Andrey Konovalov <[email protected]>

[ Upstream commit 219667c23c68eb3dbc0d5662b9246f28477fe529 ]

Similarly to commit 96fedce27e13 ("kasan: make tag based mode work with CONFIG_HARDENED_USERCOPY"), we need to reset pointer tags in __check_heap_object() in mm/slab.c before doing any pointer math.

---
 mm/slab.c | 2 ++
 1 file changed, 2 insertions(+)
mm/slab.c +2 -0
index 354a09deecff..b30b58de793b 100644
@@ -4461,6 +4461,8 @@ const char *__check_heap_object(const void *ptr, unsigned long n,
 	unsigned int objnr;
 	unsigned long offset;
 
+	ptr = kasan_reset_tag(ptr);
+
 	/* Find and validate object. */
 	cachep = page->slab_cache;
 	objnr = obj_to_index(cachep, page, (void *)ptr);
Signature · 1 line
2.19.1
author maintainer
#14 lore raw

PATCH 15/24 kasan, slab: make freelist stored without tags

In reply to Sasha Levin

From: Andrey Konovalov <[email protected]>

[ Upstream commit 51dedad06b5f6c3eea7ec1069631b1ef7796912a ]

Similarly to "kasan, slub: move kasan_poison_slab hook before page_address", move kasan_poison_slab() before alloc_slabmgmt(), which calls page_address(), to make page_address() return value to be non-tagged. This, combined with calling kasan_reset_tag() for off-slab slab management object, leads to freelist being stored non-tagged.

---
 mm/slab.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
mm/slab.c +8 -1
index b30b58de793b..cb1f38e72b4e 100644
@@ -2405,6 +2405,7 @@ static void *alloc_slabmgmt(struct kmem_cache *cachep,
 		/* Slab management obj is off-slab. */
 		freelist = kmem_cache_alloc_node(cachep->freelist_cache,
 					      local_flags, nodeid);
+		freelist = kasan_reset_tag(freelist);
 		if (!freelist)
 			return NULL;
 	} else {
@@ -2717,6 +2718,13 @@ static struct page *cache_grow_begin(struct kmem_cache *cachep,
 
 	offset *= cachep->colour_off;
 
+	/*
+	 * Call kasan_poison_slab() before calling alloc_slabmgmt(), so
+	 * page_address() in the latter returns a non-tagged pointer,
+	 * as it should be for slab pages.
+	 */
+	kasan_poison_slab(page);
+
 	/* Get slab management. */
 	freelist = alloc_slabmgmt(cachep, page, offset,
 			local_flags & ~GFP_CONSTRAINT_MASK, page_node);
@@ -2725,7 +2733,6 @@ static struct page *cache_grow_begin(struct kmem_cache *cachep,
 
 	slab_map_pages(cachep, page, freelist);
 
-	kasan_poison_slab(page);
 	cache_init_objs(cachep, page);
 
 	if (gfpflags_allow_blocking(local_flags))
Signature · 1 line
2.19.1
author maintainer
#15 lore raw

PATCH 16/24 ARCv2: lib: memcpy: fix doing prefetchw outside of buffer

In reply to Sasha Levin

From: Eugeniy Paltsev <[email protected]>

[ Upstream commit f8a15f97664178f27dfbf86a38f780a532cb6df0 ]

ARCv2 optimized memcpy uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause data corruption if this area is used for DMA IO.

Fix the issue by avoiding the PREFETCHW. This leads to performance degradation but it is OK as we'll introduce new memcpy implementation optimized for unaligned memory access using.

We also cut off all PREFETCH instructions at they are quite useless here:
* we call PREFETCH right before LOAD instruction call.
* we copy 16 or 32 bytes of data (depending on CONFIG_ARC_HAS_LL64) in a main logical loop. so we call PREFETCH 4 times (or 2 times) for each L1 cache line (in case of 64B L1 cache Line which is default case). Obviously this is not optimal.

Signed-off-by Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/lib/memcpy-archs.S | 14 --------------
 1 file changed, 14 deletions(-)
arch/arc/lib/memcpy-archs.S +0 -14
index d61044dd8b58..ea14b0bf3116 100644
@@ -25,15 +25,11 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX)	prefetch    [RX, 56]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 64]
 # define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
 # define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
 # define ZOLSHFT		5
 # define ZOLAND			0x1F
 #else
-# define PREFETCH_READ(RX)	prefetch    [RX, 28]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 32]
 # define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
 # define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
 # define ZOLSHFT		4
@@ -41,8 +37,6 @@
 #endif
 
 ENTRY_CFI(memcpy)
-	prefetch [r1]		; Prefetch the read location
-	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
-	PREFETCH_READ (r1)
-	PREFETCH_WRITE (r3)
 	LOADX (r8, r1)
 	LOADX (r10, r1)
 	LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 24)
 	or	r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 16)
 	or	r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5
Signature · 1 line
2.19.1
author maintainer
#16 lore raw

PATCH 17/24 ARC: uacces: remove lp_start, lp_end from clobber list

In reply to Sasha Levin

From: Vineet Gupta <[email protected]>

[ Upstream commit d5e3c55e01d8b1774b37b4647c30fb22f1d39077 ]

Newer ARC gcc handles lp_start, lp_end in a different way and doesn't like them in the clobber list.

Signed-off-by Vineet Gupta <vgupta at synopsys.com>
Signed-off-by Sasha Levin <sashal at kernel.org>
---
 arch/arc/include/asm/uaccess.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
arch/arc/include/asm/uaccess.h +4 -4
index 0684fd2f42e8..f82393f89215 100644
@@ -209,7 +209,7 @@ __arc_copy_from_user(void *to, const void __user *from, unsigned long n)
 		*/
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -438,7 +438,7 @@ __arc_copy_to_user(void __user *to, const void *from, unsigned long n)
 		 */
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -658,7 +658,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	"	.previous			\n"
 	: "+r"(d_char), "+r"(res)
 	: "i"(0)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
@@ -691,7 +691,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
 	: "g"(-EFAULT), "r"(count)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
Signature · 1 line
2.19.1
author maintainer
#17 lore raw

PATCH 18/24 phonet: fix building with clang

In reply to Sasha Levin

From: Arnd Bergmann <[email protected]>

[ Upstream commit 6321aa197547da397753757bd84c6ce64b3e3d89 ]

clang warns about overflowing the data[] member in the struct pnpipehdr:

net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]

                        if (hdr->data[4] == PEP_IND_READY)
                            ^         ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
                u8              data[1];

Using a flexible array member at the end of the struct avoids the warning, but since we cannot have a flexible array member inside of the union, each index now has to be moved back by one, which makes it a little uglier.

---
 include/net/phonet/pep.h |  5 +++--
 net/phonet/pep.c         | 32 ++++++++++++++++----------------
 2 files changed, 19 insertions(+), 18 deletions(-)
include/net/phonet/pep.h +3 -2
index b669fe6dbc3b..98f31c7ea23d 100644
@@ -63,10 +63,11 @@ struct pnpipehdr {
 		u8		state_after_reset;	/* reset request */
 		u8		error_code;		/* any response */
 		u8		pep_type;		/* status indication */
-		u8		data[1];
+		u8		data0;			/* anything else */
 	};
+	u8			data[];
 };
-#define other_pep_type		data[1]
+#define other_pep_type		data[0]
 
 static inline struct pnpipehdr *pnp_hdr(struct sk_buff *skb)
 {
net/phonet/pep.c +16 -16
index 850a86cde0b3..f6aa532bcbf6 100644
@@ -131,7 +131,7 @@ static int pep_indicate(struct sock *sk, u8 id, u8 code,
 	ph->utid = 0;
 	ph->message_id = id;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = code;
+	ph->error_code = code;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -152,7 +152,7 @@ static int pipe_handler_request(struct sock *sk, u8 id, u8 code,
 	ph->utid = id; /* whatever */
 	ph->message_id = id;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = code;
+	ph->error_code = code;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -207,7 +207,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
 	struct pnpipehdr *ph;
 	struct sockaddr_pn dst;
 	u8 data[4] = {
-		oph->data[0], /* PEP type */
+		oph->pep_type, /* PEP type */
 		code, /* error code, at an unusual offset */
 		PAD, PAD,
 	};
@@ -220,7 +220,7 @@ static int pep_ctrlreq_error(struct sock *sk, struct sk_buff *oskb, u8 code,
 	ph->utid = oph->utid;
 	ph->message_id = PNS_PEP_CTRL_RESP;
 	ph->pipe_handle = oph->pipe_handle;
-	ph->data[0] = oph->data[1]; /* CTRL id */
+	ph->data0 = oph->data[0]; /* CTRL id */
 
 	pn_skb_get_src_sockaddr(oskb, &dst);
 	return pn_skb_send(sk, skb, &dst);
@@ -271,17 +271,17 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 		return -EINVAL;
 
 	hdr = pnp_hdr(skb);
-	if (hdr->data[0] != PN_PEP_TYPE_COMMON) {
+	if (hdr->pep_type != PN_PEP_TYPE_COMMON) {
 		net_dbg_ratelimited("Phonet unknown PEP type: %u\n",
-				    (unsigned int)hdr->data[0]);
+				    (unsigned int)hdr->pep_type);
 		return -EOPNOTSUPP;
 	}
 
-	switch (hdr->data[1]) {
+	switch (hdr->data[0]) {
 	case PN_PEP_IND_FLOW_CONTROL:
 		switch (pn->tx_fc) {
 		case PN_LEGACY_FLOW_CONTROL:
-			switch (hdr->data[4]) {
+			switch (hdr->data[3]) {
 			case PEP_IND_BUSY:
 				atomic_set(&pn->tx_credits, 0);
 				break;
@@ -291,7 +291,7 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 			}
 			break;
 		case PN_ONE_CREDIT_FLOW_CONTROL:
-			if (hdr->data[4] == PEP_IND_READY)
+			if (hdr->data[3] == PEP_IND_READY)
 				atomic_set(&pn->tx_credits, wake = 1);
 			break;
 		}
@@ -300,12 +300,12 @@ static int pipe_rcv_status(struct sock *sk, struct sk_buff *skb)
 	case PN_PEP_IND_ID_MCFC_GRANT_CREDITS:
 		if (pn->tx_fc != PN_MULTI_CREDIT_FLOW_CONTROL)
 			break;
-		atomic_add(wake = hdr->data[4], &pn->tx_credits);
+		atomic_add(wake = hdr->data[3], &pn->tx_credits);
 		break;
 
 	default:
 		net_dbg_ratelimited("Phonet unknown PEP indication: %u\n",
-				    (unsigned int)hdr->data[1]);
+				    (unsigned int)hdr->data[0]);
 		return -EOPNOTSUPP;
 	}
 	if (wake)
@@ -317,7 +317,7 @@ static int pipe_rcv_created(struct sock *sk, struct sk_buff *skb)
 {
 	struct pep_sock *pn = pep_sk(sk);
 	struct pnpipehdr *hdr = pnp_hdr(skb);
-	u8 n_sb = hdr->data[0];
+	u8 n_sb = hdr->data0;
 
 	pn->rx_fc = pn->tx_fc = PN_LEGACY_FLOW_CONTROL;
 	__skb_pull(skb, sizeof(*hdr));
@@ -505,7 +505,7 @@ static int pep_connresp_rcv(struct sock *sk, struct sk_buff *skb)
 		return -ECONNREFUSED;
 
 	/* Parse sub-blocks */
-	n_sb = hdr->data[4];
+	n_sb = hdr->data[3];
 	while (n_sb > 0) {
 		u8 type, buf[6], len = sizeof(buf);
 		const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -738,7 +738,7 @@ static int pipe_do_remove(struct sock *sk)
 	ph->utid = 0;
 	ph->message_id = PNS_PIPE_REMOVE_REQ;
 	ph->pipe_handle = pn->pipe_handle;
-	ph->data[0] = PAD;
+	ph->data0 = PAD;
 	return pn_skb_send(sk, skb, NULL);
 }
 
@@ -815,7 +815,7 @@ static struct sock *pep_sock_accept(struct sock *sk, int flags, int *errp)
 	peer_type = hdr->other_pep_type << 8;
 
 	/* Parse sub-blocks (options) */
-	n_sb = hdr->data[4];
+	n_sb = hdr->data[3];
 	while (n_sb > 0) {
 		u8 type, buf[1], len = sizeof(buf);
 		const u8 *data = pep_get_sb(skb, &type, &len, buf);
@@ -1106,7 +1106,7 @@ static int pipe_skb_send(struct sock *sk, struct sk_buff *skb)
 	ph->utid = 0;
 	if (pn->aligned) {
 		ph->message_id = PNS_PIPE_ALIGNED_DATA;
-		ph->data[0] = 0; /* padding */
+		ph->data0 = 0; /* padding */
 	} else
 		ph->message_id = PNS_PIPE_DATA;
 	ph->pipe_handle = pn->pipe_handle;
Signature · 1 line
2.19.1
author maintainer
#18 lore raw

PATCH 19/24 mac80211_hwsim: propagate genlmsg_reply return code

In reply to Sasha Levin

From: Li RongQing <[email protected]>

[ Upstream commit 17407715240456448e4989bee46ffc93991add83 ]

genlmsg_reply can fail, so propagate its return code

---
 drivers/net/wireless/mac80211_hwsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mac80211_hwsim.c +1 -1
index 780acf23fd19..e9ec1da9935d 100644
@@ -3167,7 +3167,7 @@ static int hwsim_get_radio_nl(struct sk_buff *msg, struct genl_info *info)
 			goto out_err;
 		}
 
-		genlmsg_reply(skb, info);
+		res = genlmsg_reply(skb, info);
 		break;
 	}
 
Signature · 1 line
2.19.1
author maintainer
#19 lore raw

PATCH 20/24 net: thunderx: make CFG_DONE message to run through generic send-ack sequence

In reply to Sasha Levin

From: Vadim Lomovtsev <[email protected]>

[ Upstream commit 0dd563b9a62c4cbabf5d4fd6596440c2491e72b1 ]

At the end of NIC VF initialization VF sends CFG_DONE message to PF without using nicvf_msg_send_to_pf routine. This potentially could re-write data in mailbox. This commit is to implement common way of sending CFG_DONE message by the same way with other configuration messages by using nicvf_send_msg_to_pf() routine.

---
 drivers/net/ethernet/cavium/thunder/nic_main.c   |  2 +-
 drivers/net/ethernet/cavium/thunder/nicvf_main.c | 15 ++++++++++++---
 2 files changed, 13 insertions(+), 4 deletions(-)
drivers/net/ethernet/cavium/thunder/nic_main.c +1 -1
index da142f6bd0c3..18ddd243dfa1 100644
@@ -999,7 +999,7 @@ static void nic_handle_mbx_intr(struct nicpf *nic, int vf)
 	case NIC_MBOX_MSG_CFG_DONE:
 		/* Last message of VF config msg sequence */
 		nic_enable_vf(nic, vf, true);
-		goto unlock;
+		break;
 	case NIC_MBOX_MSG_SHUTDOWN:
 		/* First msg in VF teardown sequence */
 		if (vf >= nic->num_vf_en)
drivers/net/ethernet/cavium/thunder/nicvf_main.c +12 -3
index c75d4ea9342b..71f228cece03 100644
@@ -162,6 +162,17 @@ static int nicvf_check_pf_ready(struct nicvf *nic)
 	return 1;
 }
 
+static void nicvf_send_cfg_done(struct nicvf *nic)
+{
+	union nic_mbx mbx = {};
+
+	mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
+	if (nicvf_send_msg_to_pf(nic, &mbx)) {
+		netdev_err(nic->netdev,
+			   "PF didn't respond to CFG DONE msg\n");
+	}
+}
+
 static void nicvf_read_bgx_stats(struct nicvf *nic, struct bgx_stats_msg *bgx)
 {
 	if (bgx->rx)
@@ -1178,7 +1189,6 @@ int nicvf_open(struct net_device *netdev)
 	struct nicvf *nic = netdev_priv(netdev);
 	struct queue_set *qs = nic->qs;
 	struct nicvf_cq_poll *cq_poll = NULL;
-	union nic_mbx mbx = {};
 
 	netif_carrier_off(netdev);
 
@@ -1267,8 +1277,7 @@ int nicvf_open(struct net_device *netdev)
 		nicvf_enable_intr(nic, NICVF_INTR_RBDR, qidx);
 
 	/* Send VF config done msg to PF */
-	mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE;
-	nicvf_write_to_mbx(nic, &mbx);
+	nicvf_send_cfg_done(nic);
 
 	return 0;
 cleanup:
Signature · 1 line
2.19.1
author maintainer
#20 lore raw

PATCH 21/24 nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K

In reply to Sasha Levin

From: Jiong Wang <[email protected]>

[ Upstream commit 71c190249f0ced5b26377ea6bf829ab3af77a40c ]

The intended optimization should be A ^ 0 = A, not A ^ -1 = A.

Fixes cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
---
 drivers/net/ethernet/netronome/nfp/nfp_bpf_jit.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/netronome/nfp/nfp_bpf_jit.c +1 -1
index f8df5300f49c..6bfcd6eb74ca 100644
@@ -1017,7 +1017,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !~meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
 }
 
 static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
Signature · 1 line
2.19.1
author maintainer
#21 lore raw

PATCH 22/24 nfp: bpf: fix ALU32 high bits clearance bug

In reply to Sasha Levin

From: Jiong Wang <[email protected]>

[ Upstream commit f036ebd9bfbe1e91a3d855e85e05fc5ff156b641 ]

NFP BPF JIT compiler is doing a couple of small optimizations when jitting ALU imm instructions, some of these optimizations could save code-gen, for example:

  A & -1 =  A
  A |  0 =  A
  A ^  0 =  A

However, for ALU32, high 32-bit of the 64-bit register should still be cleared according to ISA semantics.

Fixes cd7df56ed3e6 ("nfp: add BPF to NFP code translator")
---
 .../net/ethernet/netronome/nfp/nfp_bpf_jit.c    | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)
drivers/net/ethernet/netronome/nfp/nfp_bpf_jit.c +6 -11
index 6bfcd6eb74ca..73087770d72f 100644
@@ -756,15 +756,10 @@ wrp_alu64_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
 
 static int
 wrp_alu32_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta,
-	      enum alu_op alu_op, bool skip)
+	      enum alu_op alu_op)
 {
 	const struct bpf_insn *insn = &meta->insn;
 
-	if (skip) {
-		meta->skip = true;
-		return 0;
-	}
-
 	wrp_alu_imm(nfp_prog, insn->dst_reg * 2, alu_op, insn->imm);
 	wrp_immed(nfp_prog, reg_both(insn->dst_reg * 2 + 1), 0);
 
@@ -1017,7 +1012,7 @@ static int xor_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int xor_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_XOR);
 }
 
 static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1027,7 +1022,7 @@ static int and_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int and_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND, !~meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_AND);
 }
 
 static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1037,7 +1032,7 @@ static int or_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int or_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_OR);
 }
 
 static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1047,7 +1042,7 @@ static int add_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int add_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_ADD);
 }
 
 static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
@@ -1057,7 +1052,7 @@ static int sub_reg(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 
 static int sub_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
 {
-	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB, !meta->insn.imm);
+	return wrp_alu32_imm(nfp_prog, meta, ALU_OP_SUB);
 }
 
 static int shl_imm(struct nfp_prog *nfp_prog, struct nfp_insn_meta *meta)
Signature · 1 line
2.19.1
author maintainer
#22 lore raw

PATCH 23/24 mdio_bus: Fix use-after-free on device_register fails

In reply to Sasha Levin

From: YueHaibing <[email protected]>

[ Upstream commit 6ff7b060535e87c2ae14dd8548512abfdda528fb ]

KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus.

KASAN report details as below:

BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524

CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xfa/0x1ce lib/dump_stack.c:113
 print_address_description+0x65/0x270 mm/kasan/report.c:187
 kasan_report+0x149/0x18d mm/kasan/report.c:317
 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 ? 0xffffffffc0e40000
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004

Allocated by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
 kmalloc include/linux/slab.h:545 [inline]
 kzalloc include/linux/slab.h:740 [inline]
 mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 3524:
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook mm/slub.c:1436 [inline]
 slab_free mm/slub.c:2986 [inline]
 kfree+0xe1/0x270 mm/slub.c:3938
 device_release+0x78/0x200 drivers/base/core.c:919
 kobject_cleanup lib/kobject.c:662 [inline]
 kobject_release lib/kobject.c:691 [inline]
 kref_put include/linux/kref.h:67 [inline]
 kobject_put+0x146/0x240 lib/kobject.c:708
 put_device+0x1c/0x30 drivers/base/core.c:2060
 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
 do_one_initcall+0xfa/0x5ca init/main.c:887
 do_init_module+0x204/0x5f6 kernel/module.c:3460
 load_module+0x66b2/0x8570 kernel/module.c:3808
 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8881dc824c80
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 248 bytes inside of
 2048-byte region [ffff8881dc824c80, ffff8881dc825480)
The buggy address belongs to the page:
page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000010200(slab|head)
raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
---
 drivers/net/phy/mdio_bus.c | 1 -
 1 file changed, 1 deletion(-)
drivers/net/phy/mdio_bus.c +0 -1
index 09deef4bed09..a9bbdcec0bad 100644
@@ -319,7 +319,6 @@ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
 	err = device_register(&bus->dev);
 	if (err) {
 		pr_err("mii_bus %s failed to register\n", bus->id);
-		put_device(&bus->dev);
 		return -EINVAL;
 	}
 
Signature · 1 line
2.19.1
author maintainer
#23 lore raw

PATCH 24/24 net: set static variable an initial value in atl2_probe()

In reply to Sasha Levin

From: Mao Wenan <[email protected]>

[ Upstream commit 4593403fa516a5a4cffe6883c5062d60932cbfbe ]

cards_found is a static variable, but when it enters atl2_probe(), cards_found is set to zero, the value is not consistent with last probe, so next behavior is not our expect.

---
 drivers/net/ethernet/atheros/atlx/atl2.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/net/ethernet/atheros/atlx/atl2.c +1 -3
index 2ff465848b65..097a0bf592ab 100644
@@ -1338,13 +1338,11 @@ static int atl2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *netdev;
 	struct atl2_adapter *adapter;
-	static int cards_found;
+	static int cards_found = 0;
 	unsigned long mmio_start;
 	int mmio_len;
 	int err;
 
-	cards_found = 0;
-
 	err = pci_enable_device(pdev);
 	if (err)
 		return err;
Signature · 1 line
2.19.1