DC states igt tests patch series v8
Subsystems (2)
cover DC states igt tests patch series v8
This patch series adds new tests to validate Display C states. DC states like DC5 and DC6 are validated during PSR entry/exit and during DPMS on/off cycle.
Sending new revision of patch series after addressing review comments and other relevant changes.
1. Changing the name of test from pm_dc to i915_pm_dc alinged to other PM tests.
2. Changing the DC5/6 counter check timeout from 1 sec to 3 sec,
as in case of PSR it requires more than 2 second to disable DC power wells after vblank event.
3. Changed the test name from tests/pm_dc to tests tests/i915/i915_pm_dc in name of individual patch.
Jyoti Yadav (5):
lib/igt_pm: igt lib helper routines to support DC5/6 tests tests/i915/i915_pm_dc: Added new test to verify Display C States tests/i915/i915_pm_dc: Added test for DC6 during PSR tests/i915/i915_pm_dc: Added test for DC5 during DPMS tests/i915/i915_pm_dc: Added test for DC6 during DPMS
lib/igt_pm.c | 47 +++++++++ lib/igt_pm.h | 2 + tests/Makefile.sources | 3 + tests/i915/i915_pm_dc.c | 261 +++++++++++++++++++++++++++++++++++++++++++++++ tests/i915/i915_pm_rpm.c | 17 +-- tests/meson.build | 1 + 6 files changed, 315 insertions(+), 16 deletions(-) create mode 100644 tests/i915/i915_pm_dc.c
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 1/5 lib/igt_pm: igt lib helper routines to support DC5/6 tests
From: Jyoti Yadav <[email protected]>
dmc_loaded() will be used by new test i915_pm_dc.c which will validate Display C States. So moving the same to igt_pm library. Introduced igt_disable_runtime_pm() inorder to disable runtime suspend for the function which support dc9.
v2: Simplify the comment section.
v3: Remove . from the subject line.
v4: Rebased, resolve conflicts in pm_rpm.c
Included patch set version change log.
v5: Listing actual change in patch set changelog to make review easier.
v6: igt's lib added support for disabling runtime suspend, change in commit log.
rebased due to test name pm_rpm changed to i915_pm_rpm.
--- lib/igt_pm.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_pm.h | 2 ++ tests/i915/i915_pm_rpm.c | 17 +---------------- 3 files changed, 50 insertions(+), 16 deletions(-)
lib/igt_pm.c +47 -0
@@ -38,6 +38,7 @@#include "drmtest.h" #include "igt_pm.h" #include "igt_aux.h" +#include "igt_sysfs.h" /** * SECTION:igt_pm
@@ -486,6 +487,7 @@ void igt_restore_runtime_pm(void)igt_pm_audio_restore_runtime_pm (); } +static void __igt_pm_runtime_exit_handler (int sig) {__igt_restore_runtime_pm ();
@@ -577,6 +579,24 @@ bool igt_setup_runtime_pm(void)return true; } +bool igt_disable_runtime_pm (void ) +{ +int fd; +ssize_t size; +char buf[6 ]; + +/* We know we support runtime PM, let's try to disable it now. */ + fd =open (POWER_DIR "/control" ,O_RDWR ); +igt_assert_f (fd >=0 ,"Can't open " POWER_DIR "/control\n" ); + size =write (fd,"on\n" ,3 ); +igt_assert (size ==3 ); +lseek (fd,0 ,SEEK_SET ); + size =read (fd, buf,ARRAY_SIZE (buf)); +igt_assert (size ==3 ); +igt_assert (strncmp (buf,"on\n" ,3 ) ==0 ); +close (fd); +return true; +}/** * igt_get_runtime_pm_status: *
@@ -620,3 +640,30 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status) {return igt_wait (igt_get_runtime_pm_status () == status,10000 ,100 ); } + +/** +* dmc_loaded: +* @debugfs: fd to the debugfs dir. + +* Check whether DMC FW is loaded or not. DMC FW is require for few Display C +* states like DC5 and DC6. FW does the Context Save and Restore during Display +* C States entry and exit. +* +* Returns: +* True if DMC FW is loaded otherwise false. +*/ +bool igt_pm_dmc_loaded (int debugfs) +{ +igt_require (debugfs !=-1 ); +char buf[15 ]; +int len; + + len =igt_sysfs_read (debugfs,"i915_dmc_info" , buf,sizeof (buf) -1 ); +if (len <0 ) +return true;/* no CSR support, no DMC requirement */ + + buf[len] ='\0' ; + +igt_info ("DMC: %s\n" , buf); +return strstr (buf,"fw loaded: yes" ); +}
lib/igt_pm.h +2 -0
@@ -47,8 +47,10 @@ enum igt_runtime_pm_status { };bool igt_setup_runtime_pm (void ); +bool igt_disable_runtime_pm (void );void igt_restore_runtime_pm (void );enum igt_runtime_pm_status igt_get_runtime_pm_status (void );bool igt_wait_for_pm_status (enum igt_runtime_pm_status status); +bool igt_pm_dmc_loaded (int debugfs);#endif /* IGT_PM_H */
tests/i915/i915_pm_rpm.c +1 -16
@@ -710,21 +710,6 @@ static void setup_pc8(void) has_pc8 = true; } -static bool dmc_loaded (void ) -{ -char buf[15 ]; -int len; - - len =igt_sysfs_read (debugfs,"i915_dmc_info" , buf,sizeof (buf) -1 ); -if (len <0 ) -return true;/* no CSR support, no DMC requirement */ - - buf[len] ='\0' ; - -igt_info ("DMC: %s\n" , buf); -return strstr (buf,"fw loaded: yes" ); -} -static void dump_file (int dir,const char *filename) {char *contents;
@@ -761,7 +746,7 @@ static bool setup_environment(void)igt_info ("Runtime PM support: %d\n" , has_runtime_pm);igt_info ("PC8 residency support: %d\n" , has_pc8);igt_require (has_runtime_pm); -igt_require (dmc_loaded ()); +igt_require (igt_pm_dmc_loaded (debugfs)); out:disable_all_screens (&ms_data);
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t 1/5] lib/igt_pm: igt lib helper routines to support DC5/6 tests
Quoted 36 lines · Anshuman Gupta
From: Jyoti Yadav <[email protected]>
dmc_loaded()will be used by new testi915_pm_dc.cwhich will validate Display C States. So moving the same toigt_pmlibrary. Introducedigt_disable_runtime_pm()inorder to disable runtime suspend for the function which support dc9.v2: Simplify the comment section.
v3: Remove . from the subject line.
v4: Rebased, resolve conflicts inpm_rpm.c
Included patch set version change log.
v5: Listing actual change in patch set changelog to make review easier.
v6: igt's lib added support for disabling runtime suspend, change in commit log.
rebased due to test namepm_rpmchanged toi915_pm_rpm.Signed-off-by Jyoti Yadav <[email protected]>Signed-off-by Anshuman Gupta <[email protected]>--- lib/igt_pm.c | 47 +++++++++++++++++++++++++++++++++++++++++++++++ lib/igt_pm.h | 2 ++ tests/i915/i915_pm_rpm.c | 17 +---------------- 3 files changed, 50 insertions(+), 16 deletions(-)lib/igt_pm.c +1
-0@@ -38,6 +38,7 @@#include "drmtest.h" #include "igt_pm.h" #include "igt_aux.h" +#include "igt_sysfs.h" /** * SECTION:igt_pm
lib/igt_pm.c void igt_restore_runtime_pm(void) · line 490
Quoted 4 lines
lib/igt_pm.c +1
-0@@ -486,6 +487,7 @@ void igt_restore_runtime_pm(void)igt_pm_audio_restore_runtime_pm (); } +
Extra w/s.
lib/igt_pm.c bool igt_setup_runtime_pm(void) · line 587
Quoted 13 lines
lib/igt_pm.c +6
-0static void __igt_pm_runtime_exit_handler (int sig) {__igt_restore_runtime_pm ();@@ -577,6 +579,24 @@ bool igt_setup_runtime_pm(void)return true; } +bool igt_disable_runtime_pm (void ) +{ +int fd; +ssize_t size; +char buf[6 ]; +
This being a library function it should make sure that the original value of POWER_DIR/control has been saved. For instance by asserting that igt_setup_runtime_pm() has been called previously.
Quoted 99 lines
lib/igt_pm.c +39
-0+/* We know we support runtime PM, let's try to disable it now. */ + fd =open (POWER_DIR "/control" ,O_RDWR ); +igt_assert_f (fd >=0 ,"Can't open " POWER_DIR "/control\n" ); + size =write (fd,"on\n" ,3 ); +igt_assert (size ==3 ); +lseek (fd,0 ,SEEK_SET ); + size =read (fd, buf,ARRAY_SIZE (buf)); +igt_assert (size ==3 ); +igt_assert (strncmp (buf,"on\n" ,3 ) ==0 ); +close (fd); +return true; +}/** * igt_get_runtime_pm_status: * @@ -620,3 +640,30 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status) {return igt_wait (igt_get_runtime_pm_status () == status,10000 ,100 ); } + +/** +* dmc_loaded: +* @debugfs: fd to the debugfs dir. + +* Check whether DMC FW is loaded or not. DMC FW is require for few Display C +* states like DC5 and DC6. FW does the Context Save and Restore during Display +* C States entry and exit. +* +* Returns: +* True if DMC FW is loaded otherwise false. +*/ +bool igt_pm_dmc_loaded (int debugfs) +{ +igt_require (debugfs !=-1 ); +char buf[15 ]; +int len; + + len =igt_sysfs_read (debugfs,"i915_dmc_info" , buf,sizeof (buf) -1 ); +if (len <0 ) +return true;/* no CSR support, no DMC requirement */ + + buf[len] ='\0' ; + +igt_info ("DMC: %s\n" , buf); +return strstr (buf,"fw loaded: yes" ); +}lib/igt_pm.h +2
-0@@ -47,8 +47,10 @@ enum igt_runtime_pm_status { };bool igt_setup_runtime_pm (void ); +bool igt_disable_runtime_pm (void );void igt_restore_runtime_pm (void );enum igt_runtime_pm_status igt_get_runtime_pm_status (void );bool igt_wait_for_pm_status (enum igt_runtime_pm_status status); +bool igt_pm_dmc_loaded (int debugfs);#endif /* IGT_PM_H */ tests/i915/i915_pm_rpm.c +1
-16@@ -710,21 +710,6 @@ static void setup_pc8(void) has_pc8 = true; } -static bool dmc_loaded (void ) -{ -char buf[15 ]; -int len; - - len =igt_sysfs_read (debugfs,"i915_dmc_info" , buf,sizeof (buf) -1 ); -if (len <0 ) -return true;/* no CSR support, no DMC requirement */ - - buf[len] ='\0' ; - -igt_info ("DMC: %s\n" , buf); -return strstr (buf,"fw loaded: yes" ); -} -static void dump_file (int dir,const char *filename) {char *contents;@@ -761,7 +746,7 @@ static bool setup_environment(void)igt_info ("Runtime PM support: %d\n" , has_runtime_pm);igt_info ("PC8 residency support: %d\n" , has_pc8);igt_require (has_runtime_pm); -igt_require (dmc_loaded ()); +igt_require (igt_pm_dmc_loaded (debugfs)); out:disable_all_screens (&ms_data);Signature · 1 line
2.7.4
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 2/5 tests/i915/i915_pm_dc: Added new test to verify Display C States
In reply to Anshuman GuptaFrom: Jyoti Yadav <[email protected]>
Currently this test validates DC5 upon PSR entry for supported platforms. Added new file for compilation inside Makefile and Meson.
v2: Used the debugfs entry for DC counters instead of Registers.
Used shorter names for variables.
Introduced timeout to read DC counters.
v3: one second timeout is introduced to read DC counters.
Skip the subtest if counters are not available for that platform.
v4: Rebased, to fix compilation error in psr_enable(), psr_wait_entry()
and replaced igt_display_init() by igt_display_require() in pm_rpm.c. Addressed the review comment by removing unused function display_init, removing redundant igt commit suggested by Imre.
Fixed typo in read_dc_counter().
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Rearranged preprocessor directives at one place.
Fixed compilation warning by adding function prototype for dc_state_wait_entry() and check_dc_counter().
Listing actual change in patch set changelog to make review easier.
v6: Fixed "i915_edp_psr_status" string to "Sink support: yes".
v7: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests, changed the DC5/6 counter check timeout to 3 second.
--- tests/Makefile.sources | 3 + tests/i915/i915_pm_dc.c | 210 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/meson.build | 1 + 3 files changed, 214 insertions(+) create mode 100644 tests/i915/i915_pm_dc.c
tests/Makefile.sources +3 -0
@@ -492,6 +492,9 @@ i915_pm_rc6_residency_SOURCES = i915/i915_pm_rc6_residency.c TESTS_progs += i915_pm_rpm i915_pm_rpm_SOURCES = i915/i915_pm_rpm.c +TESTS_progs += i915_pm_dc +i915_pm_dc_SOURCES = i915/i915_pm_dc.c + TESTS_progs += i915_pm_rps i915_pm_rps_SOURCES = i915/i915_pm_rps.c
tests/i915/i915_pm_dc.c new file +210 -0
210 lines not on this page · raw message
tests/meson.build +1 -0
@@ -221,6 +221,7 @@ i915_progs = [ 'i915_pm_lpsp', 'i915_pm_rc6_residency', 'i915_pm_rpm', + 'i915_pm_dc', 'i915_pm_rps', 'i915_pm_sseu', 'i915_query',
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 3/5 tests/i915/i915_pm_dc: Added test for DC6 during PSR
In reply to Anshuman GuptaFrom: Jyoti Yadav <[email protected]>
This patch add subtest to check DC6 entry on PSR for the supported platforms.
v2: Rename the subtest with more meaningful name.
v3: Rebased.
v4: Rebased, to fix compilation error in psr_enable().
Addressed review comment by fixing typo in comment description of DC6 PSR subtest.
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.
--- tests/i915/i915_pm_dc.c | 8 ++++++++ 1 file changed, 8 insertions(+)
tests/i915/i915_pm_dc.c +8 -0
@@ -201,6 +201,14 @@ int main(int argc, char *argv[])test_dc_state_psr (&data,CHECK_DC5 ); } + igt_subtest("dc6-psr") { + data.op_psr_mode =PSR_MODE_1 ; +psr_enable (data.debugfs_fd, data.op_psr_mode); +igt_require_f (edp_psr_sink_support (&data), +"Sink does not support PSR\n" ); +test_dc_state_psr (&data,CHECK_DC6 ); + } + igt_fixture {close (data.debugfs_fd);display_fini (&data);
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 4/5 tests/i915/i915_pm_dc: Added test for DC5 during DPMS
In reply to Anshuman GuptaFrom: Jyoti Yadav <[email protected]>
Added new subtest for DC5 entry during DPMS on/off cycle. During DPMS on/off cycle DC5 counter is incremented.
v2: Rename the subtest with meaningful name.
v3: Rebased.
v4: Addressed review comments by removing leftover code
cleanup().
v5: Addressed the review comment by removing redundant
read_dc_counter() suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Three way patch applied, no functional change.
v7: Disabling runtime suspend for the platfrom which support, DC9.
rebased due to test name pm_dc changed to i915_pm_dc, aligning to other PM tests.
--- tests/i915/i915_pm_dc.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
tests/i915/i915_pm_dc.c +39 -0
@@ -46,6 +46,7 @@ typedef struct {enum psr_mode op_psr_mode;drmModeModeInfo *mode;igt_output_t *output; +bool runtime_suspend_disabled; } data_t;bool dc_state_wait_entry (int drm_fd,int dc_flag,int prev_dc_count);
@@ -173,6 +174,39 @@ static void test_dc_state_psr(data_t *data, int dc_flag)cleanup (data); } +static void dpms_off_on (data_t *data) +{ +for (int i =0 ; i < data->display.n_outputs; i++) { +kmstest_set_connector_dpms (data->drm_fd, data->display.outputs[i].config.connector, +DRM_MODE_DPMS_OFF ); + } + +if (!data->runtime_suspend_disabled) +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_SUSPENDED )); + +for (int i =0 ; i < data->display.n_outputs; i++) { +kmstest_set_connector_dpms (data->drm_fd, data->display.outputs[i].config.connector, +DRM_MODE_DPMS_ON ); + } + +if (!data->runtime_suspend_disabled) +igt_assert (igt_wait_for_pm_status (IGT_RUNTIME_PM_STATUS_ACTIVE )); +} + +static void test_dc_state_dpms (data_t *data,int dc_flag) +{ +uint32_t dc_counter; + +if (IS_BROXTON (data->devid) ||IS_GEMINILAKE (data->devid) || +IS_ICELAKE (data->devid)) + data->runtime_suspend_disabled =igt_disable_runtime_pm (); + + dc_counter =read_dc_counter (data->drm_fd, dc_flag); +dpms_off_on (data); +check_dc_counter (data->drm_fd, dc_flag, dc_counter); +igt_restore_runtime_pm (); +} +int main (int argc,char *argv[]) {bool has_runtime_pm;
@@ -189,6 +223,7 @@ int main(int argc, char *argv[]) has_runtime_pm =igt_setup_runtime_pm ();igt_info ("Runtime PM support: %d\n" , has_runtime_pm);igt_require (has_runtime_pm); + data.runtime_suspend_disabled = false;igt_require (igt_pm_dmc_loaded (data.debugfs_fd));igt_display_require (&data.display, data.drm_fd); }
@@ -209,6 +244,10 @@ int main(int argc, char *argv[])test_dc_state_psr (&data,CHECK_DC6 ); } + igt_subtest("dc5-dpms") { +test_dc_state_dpms (&data,CHECK_DC5 ); + } + igt_fixture {close (data.debugfs_fd);display_fini (&data);
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH 5/5 tests/i915/i915_pm_dc: Added test for DC6 during DPMS
In reply to Anshuman GuptaFrom: Jyoti Yadav <[email protected]>
Added new subtest for DC6 entry during DPMS on/off cycle. During DPMS on/off cycle DC6 counter is incremented.
v2: Renamed the subtest name.
v3: Rebased.
v4: Addressed review comment by replacing igt_display_init() to
igt_display_require(), changes got done in patch set 2.
v5: Addressed the review comment by removing redundant read_dc_counter()
suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.
--- tests/i915/i915_pm_dc.c | 4 ++++ 1 file changed, 4 insertions(+)
tests/i915/i915_pm_dc.c +4 -0
@@ -248,6 +248,10 @@ int main(int argc, char *argv[])test_dc_state_dpms (&data,CHECK_DC5 ); } + igt_subtest("dc6-dpms") { +test_dc_state_dpms (&data,CHECK_DC6 ); + } + igt_fixture {close (data.debugfs_fd);display_fini (&data);
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for DC states igt tests patch series (rev5)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: DC states igt tests patch series (rev5)
URL : https://patchwork.freedesktop.org/series/56713/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5740 -> IGTPW_2607
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/5/mbox/
Known issues
------------
Here are the changes found in IGTPW_2607 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@query-info:
- fi-bsw-kefka: NOTRUN -> SKIP [fdo#109271] +56
* igt@gem_ctx_create@basic-files:
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] +106
* igt@gem_exec_basic@gtt-bsd2:
- fi-byt-clapper: NOTRUN -> SKIP [fdo#109271] +57
* igt@gem_exec_store@basic-bsd2:
- fi-hsw-4770: NOTRUN -> SKIP [fdo#109271] +41
* igt@i915_pm_rpm@basic-rte:
- fi-bsw-kefka: NOTRUN -> FAIL [fdo#108800]
* igt@kms_busy@basic-flip-c:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
- fi-byt-clapper: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
- fi-gdg-551: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
- fi-bsw-kefka: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] * igt@kms_chamelium@hdmi-crc-fast:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] +52
* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: PASS -> FAIL [fdo#103167]
- fi-byt-clapper: NOTRUN -> FAIL [fdo#103167]
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: NOTRUN -> FAIL [fdo#107362]
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
- fi-byt-clapper: NOTRUN -> FAIL [fdo#103191] / [fdo#107362] +1
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s4-devices:
- fi-kbl-7500u: DMESG-WARN [fdo#105128] / [fdo#107139] -> PASS
* igt@i915_module_load@reload:
- fi-ilk-650: DMESG-WARN [fdo#106387] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#105128]: https://bugs.freedesktop.org/show_bug.cgi?id=105128
[fdo#106387]: https://bugs.freedesktop.org/show_bug.cgi?id=106387
[fdo#107139]: https://bugs.freedesktop.org/show_bug.cgi?id=107139
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108800]: https://bugs.freedesktop.org/show_bug.cgi?id=108800
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109638]: https://bugs.freedesktop.org/show_bug.cgi?id=109638
[fdo#110028]: https://bugs.freedesktop.org/show_bug.cgi?id=110028
Participating hosts (39 -> 42)
------------------------------
Additional (6): fi-byt-j1900 fi-byt-clapper fi-hsw-4770 fi-gdg-551 fi-icl-y fi-bsw-kefka
Missing (3): fi-ilk-m540 fi-bdw-samus fi-hsw-4200u
Build changes
-------------
* IGT: IGT_4884 -> IGTPW_2607
CI_DRM_5740: a9decdcc27ca0e8dbdb538cf58e3840274110c17 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2607: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2607/
IGT_4884: c46051337b972f8b5a302afb6f603df06fea527d @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Testlist changes ==
+igt@i915_pm_dc@dc5-dpms
+igt@i915_pm_dc@dc5-psr
+igt@i915_pm_dc@dc6-dpms
+igt@i915_pm_dc@dc6-psr
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2607/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for DC states igt tests patch series (rev5)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: DC states igt tests patch series (rev5)
URL : https://patchwork.freedesktop.org/series/56713/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5740_full -> IGTPW_2607_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/5/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_2607_full:
### IGT changes ###
#### Possible regressions ####
* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-kbl: NOTRUN -> FAIL
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* {igt@kms_plane@pixel-format-pipe-b-planes}:
- shard-apl: PASS -> FAIL
New tests
---------
New tests have been introduced between CI_DRM_5740_full and IGTPW_2607_full:
### New IGT tests (4) ###
* igt@i915_pm_dc@dc5-dpms:
- Statuses : 3 pass(s) 2 skip(s)
- Exec time: [0.0, 0.56] s
* igt@i915_pm_dc@dc5-psr:
- Statuses : 5 skip(s)
- Exec time: [0.0] s
* igt@i915_pm_dc@dc6-dpms:
- Statuses : 1 fail(s) 4 skip(s)
- Exec time: [0.0, 3.81] s
* igt@i915_pm_dc@dc6-psr:
- Statuses : 4 skip(s)
- Exec time: [0.0] s
Known issues
------------
Here are the changes found in IGTPW_2607_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_schedule@deep-bsd:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +85
* igt@gen3_render_tiledx_blits:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +18
* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +3
* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-apl: NOTRUN -> SKIP [fdo#109271] +15
* {igt@i915_pm_dc@dc6-psr} (NEW):
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +1
* igt@kms_atomic_transition@plane-toggle-modeset-transition:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: PASS -> DMESG-WARN [fdo#107956]
- shard-snb: PASS -> DMESG-WARN [fdo#107956] +1
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-c:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]
* igt@kms_busy@extended-pageflip-modeset-hang-oldfb-render-a:
- shard-glk: NOTRUN -> DMESG-WARN [fdo#107956]
* igt@kms_color@pipe-c-degamma:
- shard-glk: NOTRUN -> FAIL [fdo#104782]
* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]
* igt@kms_cursor_crc@cursor-256x85-onscreen:
- shard-glk: NOTRUN -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: PASS -> FAIL [fdo#103232] +1
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-render:
- shard-apl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-pwrite:
- shard-glk: PASS -> FAIL [fdo#103167] +3
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-d:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_plane_alpha_blend@pipe-a-alpha-opaque-fb:
- shard-apl: PASS -> FAIL [fdo#108145]
- shard-kbl: PASS -> FAIL [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
- shard-glk: PASS -> FAIL [fdo#108145] +1
* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-kbl: PASS -> FAIL [fdo#109016]
* igt@kms_setmode@basic:
- shard-kbl: PASS -> FAIL [fdo#99912]
* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +9
* igt@kms_universal_plane@universal-plane-pipe-c-functional:
- shard-apl: PASS -> FAIL [fdo#103166]
* igt@kms_vblank@pipe-a-ts-continuation-modeset-rpm:
- shard-apl: PASS -> FAIL [fdo#104894] +2
#### Possible fixes ####
* igt@gem_eio@reset-stress:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS
* igt@kms_atomic_transition@1x-modeset-transitions-nonblocking-fencing:
- shard-apl: FAIL [fdo#109660] -> PASS
- shard-kbl: FAIL [fdo#109660] -> PASS
* igt@kms_atomic_transition@plane-all-modeset-transition-fencing:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS
* igt@kms_busy@extended-modeset-hang-newfb-render-c:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS
* igt@kms_chv_cursor_fail@pipe-c-256x256-right-edge:
- shard-hsw: FAIL [fdo#107814] -> PASS
* igt@kms_color@pipe-a-ctm-max:
- shard-apl: FAIL [fdo#108147] -> PASS
* igt@kms_color@pipe-b-legacy-gamma:
- shard-glk: FAIL [fdo#104782] -> PASS
- shard-apl: FAIL [fdo#104782] -> PASS
- shard-kbl: FAIL [fdo#104782] -> PASS * igt@kms_cursor_crc@cursor-128x42-onscreen:
- shard-apl: FAIL [fdo#103232] -> PASS +2
* igt@kms_cursor_crc@cursor-64x64-sliding:
- shard-kbl: FAIL [fdo#103232] -> PASS
* igt@kms_cursor_crc@cursor-alpha-opaque:
- shard-glk: FAIL [fdo#109350] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-kbl: FAIL [fdo#103167] -> PASS
- shard-apl: FAIL [fdo#103167] -> PASS
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-cur-indfb-move:
- shard-glk: FAIL [fdo#103167] -> PASS +1
* igt@kms_plane@plane-position-hole-pipe-a-planes:
- shard-hsw: DMESG-WARN [fdo#102614] -> PASS
* {igt@kms_plane_multiple@atomic-pipe-b-tiling-x}:
- shard-apl: FAIL [fdo#110037] -> PASS +2
* {igt@kms_plane_multiple@atomic-pipe-b-tiling-yf}:
- shard-kbl: FAIL [fdo#110037] -> PASS +1
* {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
- shard-glk: FAIL [fdo#110037] -> PASS +2
* igt@kms_plane_scaling@pipe-b-scaler-with-clipping-clamping:
- shard-glk: SKIP [fdo#109271] / [fdo#109278] -> PASS
* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS
* igt@kms_setmode@basic:
- shard-apl: FAIL [fdo#99912] -> PASS
- shard-hsw: FAIL [fdo#99912] -> PASS
* igt@kms_vblank@pipe-c-ts-continuation-dpms-suspend:
- shard-apl: FAIL [fdo#104894] -> PASS
#### Warnings ####
* igt@kms_plane_scaling@pipe-c-scaler-with-rotation:
- shard-glk: FAIL -> SKIP [fdo#109271] / [fdo#109278] +1
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#107814]: https://bugs.freedesktop.org/show_bug.cgi?id=107814
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109350]: https://bugs.freedesktop.org/show_bug.cgi?id=109350
[fdo#109660]: https://bugs.freedesktop.org/show_bug.cgi?id=109660
[fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
[fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 5)
------------------------------
Missing (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u
Build changes
-------------
* IGT: IGT_4884 -> IGTPW_2607
* Piglit: piglit_4509 -> None
CI_DRM_5740: a9decdcc27ca0e8dbdb538cf58e3840274110c17 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2607: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2607/
IGT_4884: c46051337b972f8b5a302afb6f603df06fea527d @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2607/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev