Skip to contentSkip to conversation

drivers: video: Fix parsing oftree timings

PATCH Applied Alexander Shiyan 2 participants 2 messages Mar 15, 2019 – Mar 18, 2019 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers: video: Fix parsing oftree timings

This patch fixes the parsing of the display timings options if the range is specified (min/typ/max). Also fixed the double release of memory in case of failure.

barebox 2018.12.0-00341-g23b28d33a-dirty #6 Fri Mar 15 09:20:25 MSK 2019

Board: Mega-Milas Informer i.MX6
detected i.MX6 Quad revision 1.2
i.MX reset reason POR (SRSR: 0x00000001)
mdio_bus: miibus0: probed
eth0: got preset MAC address: 50:2d:f4:07:71:0b
nand: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit), 1024MiB, page size: 2048, OOB size: 64 Bad block table found at page 524224, version 0x01
Bad block table found at page 524160, version 0x01
m25p80 flash@00: n25q128a13 (16384 Kbytes)
imx-usb 2184000.usb@2184000: USB EHCI 1.00
imx-usb 2184200.usb@2184200: USB EHCI 1.00
imx-esdhc 2198000.usdhc@2198000: registered as mmc2
imx-ipuv3 2400000.ipu@2400000: IPUv3H probed
ERROR: /ldb/lvds-channel@0/display-timings/PH320240T: illegal timing specification in clock-frequency
ERROR: /ldb/lvds-channel@0/display-timings/PH320240T: error reading timing properties
ERROR: /ldb/lvds-channel@0: error in timing 1
ERROR: unable to handle NULL pointer dereference at address 0x00000013

pc : [<4fe05742>]    lr : [<4fe05849>]

sp : 4ffefa80 ip : ffffffff fp : 2fefe84c
r10: 2ff656e8 r9 : 0000002c r8 : 2ff19630
r7 : 00000000 r6 : 0000004c r5 : 2ff65960 r4 : 00000007
r3 : 00000013 r2 : 00000000 r1 : 4fe87584 r0 : 2fefb460
Flags: nzcv IRQs off FIQs off Mode SVC_32
[<4fe05742>] (remove_free_block+0xe/0x3e) from [<4fe05849>] (block_locate_free+0x7f/0x88) [<4fe05849>] (block_locate_free+0x7f/0x88) from [<4fe0599b>] (tlsf_malloc+0x17/0x32) [<4fe0599b>] (tlsf_malloc+0x17/0x32) from [<4fe0559b>] (malloc+0x13/0x24) [<4fe0559b>] (malloc+0x13/0x24) from [<4fe3a1f3>] (strdup+0x11/0x22) [<4fe3a1f3>] (strdup+0x11/0x22) from [<4fe006f3>] (pr_puts+0x33/0x84) [<4fe006f3>] (pr_puts+0x33/0x84) from [<4fe00803>] (dev_printf+0x6f/0x8c) [<4fe00803>] (dev_printf+0x6f/0x8c) from [<00000000>] (0x0)

[<4fe54715>] (unwind_backtrace+0x1/0x60) from [<4fe00de1>] (panic+0x1d/0x34) [<4fe00de1>] (panic+0x1d/0x34) from [<4fe5285d>] (do_exception+0xd/0x10) [<4fe5285d>] (do_exception+0xd/0x10) from [<4fe528bd>] (do_data_abort+0x21/0x2c) [<4fe528bd>] (do_data_abort+0x21/0x2c) from [<4fe524d4>] (do_abort_6+0x48/0x54)
### ERROR ### Please RESET the board ###

---
 drivers/video/of_display_timing.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/video/of_display_timing.c +7 -8
index 20f9354a1..17d8823c4 100644
@@ -14,7 +14,8 @@
 
 void display_timings_release(struct display_timings *disp)
 {
-	free(disp->modes);
+	if (disp->modes)
+		free(disp->modes);
 	free(disp);
 }
 EXPORT_SYMBOL_GPL(display_timings_release);
@@ -43,7 +44,7 @@ static int parse_timing_property(const struct device_node *np, const char *name,
 	}
 
 	cells = length / sizeof(u32);
-	if (cells == 1) {
+	if ((cells == 1) || (cells == 3)) {
 		ret = of_property_read_u32(np, name, res);
 	} else {
 		pr_err("%s: illegal timing specification in %s\n",
@@ -129,7 +130,7 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 	if (!entry) {
 		pr_err("%s: no timing specifications given\n",
 			np->full_name);
-		goto entryfail;
+		goto fail;
 	}
 
 	pr_debug("%s: using %s as default timing\n",
@@ -141,7 +142,7 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 	if (disp->num_modes == 0) {
 		/* should never happen, as entry was already found above */
 		pr_err("%s: no timings specified\n", np->full_name);
-		goto entryfail;
+		goto fail;
 	}
 
 	disp->modes = xzalloc(sizeof(struct fb_videomode) * disp->num_modes);
@@ -163,7 +164,7 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 			 */
 			pr_err("%s: error in timing %d\n",
 				np->full_name, disp->num_modes + 1);
-			goto timingfail;
+			goto fail;
 		}
 
 		mode->name = xstrdup(entry->name);
@@ -180,10 +181,8 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 
 	return disp;
 
-timingfail:
+fail:
 	display_timings_release(disp);
-entryfail:
-	free(disp);
 
 	return NULL;
 }
Signature · 7 lines
2.13.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 5 lines · Alexander Shiyan

This patch fixes the parsing of the display timings options if the range is specified (min/typ/max). Also fixed the double release of memory in case of failure.

barebox 2018.12.0-00341-g23b28d33a-dirty #6 Fri Mar 15 09:20:25 MSK 2019

Applied, thanks

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox