ARM: mvebu: use correct name for pcie controller
PATCH 1/1 ARM: mvebu: use correct name for pcie controller
When armada-385.dtsi was sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that include armada-385.dtsi were missed in the update retaining the old name. This updates the affected boards.
Reported-by Влад Мао <[email protected]>
Signed-off-by Chris Packham <[email protected]>
---
arch/arm/dts/armada-385-amc.dts | 2 +- arch/arm/dts/armada-385-turris-omnia.dts | 2 +- arch/arm/dts/armada-388-clearfog.dts | 2 +- arch/arm/dts/armada-388-gp.dts | 2 +- arch/arm/dts/armada-38x-controlcenterdc.dts | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-)
arch/arm/dts/armada-385-amc.dts +1 -1
@@ -133,7 +133,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; pcie at 1,0 { /* Port 0, Lane 0 */
arch/arm/dts/armada-385-turris-omnia.dts +1 -1
@@ -96,7 +96,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; pcie at 1,0 {
arch/arm/dts/armada-388-clearfog.dts +1 -1
@@ -124,7 +124,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* * The two PCIe units are accessible through
arch/arm/dts/armada-388-gp.dts +1 -1
@@ -234,7 +234,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* * One PCIe units is accessible through
arch/arm/dts/armada-38x-controlcenterdc.dts +1 -1
@@ -243,7 +243,7 @@ }; }; - pcie-controller { + pcie { status = "okay"; /* * The two PCIe units are accessible through
Signature · 1 line
2.21.0
PATCH 1/1 ARM: mvebu: use correct name for pcie controller
Quoted 7 lines · Chris Packham
When
armada-385.dtsiwas sync'd from Linux the name of the node describing the pcie controller was changed from pcie-controller to pcie. Some of the boards that includearmada-385.dtsiwere missed in the update retaining the old name. This updates the affected boards.Reported-by Влад Мао <[email protected]>Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan