Skip to contentSkip to conversation

staging: rtl8723bs: hal: Remove and modify NULL comparisons

PATCH Superseded Himadri Pandya 2 participants 7 messages Mar 16, 2019 Staging

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v2 cover staging: rtl8723bs: hal: Remove and modify NULL comparisons

- This patchset removes comparision to NULL in various files of drivers/staging/rtl8723bs/hal/ .

- The changes are broken into separate patches to keep the length of each patch below/near 100 lines for convinient reviewing.

v2:
- Change subject lines of patches
- Include a new patch to modify comparision with a constant

Himadri Pandya (4):
staging: rtl8723bs: hal: Remove comparisions to NULL
staging: rtl8723bs: hal: Remove NULL comparisions
staging: rtl8723bs: hal: Replace variable==NULL comparisions with
!variable
staging: rtl8723bs: hal: Modify comparision to keep constant at right

 drivers/staging/rtl8723bs/hal/hal_btcoex.c     |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com.c        |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 18 +++++++++---------
 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c   |  8 ++++----
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c |  6 +++---
 5 files changed, 24 insertions(+), 24 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/4 staging: rtl8723bs: hal: Remove comparisions to NULL

Remove comparision to NULL. Suggested by Coccinelle.

---
Changes in V2:
- Change subject line

---
 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c   | 8 ++++----
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c +4 -4
index 9f4a10aaa774..dc2db3b8ffd6 100644
@@ -1480,7 +1480,7 @@ static void rtl8723b_set_FwRsvdPagePkt(
 	MaxRsvdPageBufSize = RsvdPageNum*PageSize;
 
 	pcmdframe = rtw_alloc_cmdxmitframe(pxmitpriv);
-	if (pcmdframe == NULL) {
+	if (!pcmdframe) {
 		DBG_871X("%s: alloc ReservedPagePacket fail!\n", __func__);
 		return;
 	}
@@ -2069,7 +2069,7 @@ void rtl8723b_Add_RateATid(
 	u32 mask = bitmap&0x0FFFFFFF;
 
 	psta = pmlmeinfo->FW_sta_info[mac_id].psta;
-	if (psta == NULL)
+	if (!psta)
 		return;
 
 	bw = psta->bw_mode;
@@ -2107,7 +2107,7 @@ static void ConstructBtNullFunctionData(
 	pmlmeext = &padapter->mlmeextpriv;
 	pmlmeinfo = &pmlmeext->mlmext_info;
 
-	if (NULL == StaAddr) {
+	if (!StaAddr) {
 		memcpy(bssid, myid(&padapter->eeprompriv), ETH_ALEN);
 		StaAddr = bssid;
 	}
@@ -2176,7 +2176,7 @@ static void SetFwRsvdPagePkt_BTCoex(struct adapter *padapter)
 	MaxRsvdPageBufSize = RsvdPageNum*PageSize;
 
 	pcmdframe = rtw_alloc_cmdxmitframe(pxmitpriv);
-	if (pcmdframe == NULL) {
+	if (!pcmdframe) {
 		DBG_8192C("%s: alloc ReservedPagePacket fail!\n", __func__);
 		return;
 	}
drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c +3 -3
index 69c4db5b5b0c..c4fb9fe2ae73 100644
@@ -63,7 +63,7 @@ static s32 rtl8723_dequeue_writeport(struct adapter *padapter)
 	else
 		pxmitbuf = dequeue_pending_xmitbuf(pxmitpriv);
 
-	if (pxmitbuf == NULL)
+	if (!pxmitbuf)
 		return true;
 
 	deviceId = ffaddr2deviceId(pdvobjpriv, pxmitbuf->ff_hwaddr);
@@ -284,7 +284,7 @@ static s32 xmit_xmitframes(struct adapter *padapter, struct xmit_priv *pxmitpriv
 				/*  check xmit_buf size enough or not */
 				txlen = txdesc_size + rtw_wlan_pkt_size(pxmitframe);
 				if (
-					(NULL == pxmitbuf) ||
+					(!pxmitbuf) ||
 					((_RND(pxmitbuf->len, 8) + txlen) > max_xmit_len) ||
 					(k >= (rtw_hal_sdio_max_txoqt_free_space(padapter)-1))
 				) {
@@ -307,7 +307,7 @@ static s32 xmit_xmitframes(struct adapter *padapter, struct xmit_priv *pxmitpriv
 					}
 
 					pxmitbuf = rtw_alloc_xmitbuf(pxmitpriv);
-					if (pxmitbuf == NULL) {
+					if (!pxmitbuf) {
 #ifdef DBG_XMIT_BUF
 						DBG_871X_LEVEL(_drv_err_, "%s: xmit_buf is not enough!\n", __func__);
 #endif
Signature · 1 line
2.17.1
#2 lore raw

PATCH v2 2/4 staging: rtl8723bs: hal: Remove NULL comparisions

In reply to Himadri Pandya

Remove comparision to NULL. Suggested by Coccinelle.

---
Changes in V2:
- Change subject line

---
 drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/staging/rtl8723bs/hal/hal_com_phycfg.c +9 -9
index 12c1cd590056..e15182af2663 100644
@@ -2236,7 +2236,7 @@ int phy_ConfigMACWithParaFile(struct adapter *Adapter, char *pFileName)
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pHalData->mac_reg_len == 0) && (pHalData->mac_reg == NULL)) {
+	if ((pHalData->mac_reg_len == 0) && !pHalData->mac_reg) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
@@ -2311,7 +2311,7 @@ int phy_ConfigBBWithParaFile(
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pBufLen != NULL) && (*pBufLen == 0) && (pBuf == NULL)) {
+	if (pBufLen && (*pBufLen == 0) && !pBuf) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
@@ -2336,7 +2336,7 @@ int phy_ConfigBBWithParaFile(
 			}
 		}
 	} else {
-		if ((pBufLen != NULL) && (*pBufLen == 0) && (pBuf == NULL)) {
+		if (pBufLen && (*pBufLen == 0) && !pBuf) {
 			memcpy(pHalData->para_file_buf, pBuf, *pBufLen);
 			rtStatus = _SUCCESS;
 		} else
@@ -2680,7 +2680,7 @@ int phy_ConfigBBWithPgParaFile(struct adapter *Adapter, char *pFileName)
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pHalData->bb_phy_reg_pg_len == 0) && (pHalData->bb_phy_reg_pg == NULL)) {
+	if ((pHalData->bb_phy_reg_pg_len == 0) && !pHalData->bb_phy_reg_pg) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
@@ -2696,7 +2696,7 @@ int phy_ConfigBBWithPgParaFile(struct adapter *Adapter, char *pFileName)
 			}
 		}
 	} else {
-		if ((pHalData->bb_phy_reg_pg_len != 0) && (pHalData->bb_phy_reg_pg != NULL)) {
+		if ((pHalData->bb_phy_reg_pg_len != 0) && pHalData->bb_phy_reg_pg) {
 			memcpy(pHalData->para_file_buf, pHalData->bb_phy_reg_pg, pHalData->bb_phy_reg_pg_len);
 			rtStatus = _SUCCESS;
 		} else
@@ -2743,7 +2743,7 @@ int PHY_ConfigRFWithParaFile(
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pBufLen != NULL) && (*pBufLen == 0) && (pBuf == NULL)) {
+	if (pBufLen && (*pBufLen == 0) && !pBuf) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
@@ -2768,7 +2768,7 @@ int PHY_ConfigRFWithParaFile(
 			}
 		}
 	} else {
-		if ((pBufLen != NULL) && (*pBufLen == 0) && (pBuf == NULL)) {
+		if (pBufLen && (*pBufLen == 0) && !pBuf) {
 			memcpy(pHalData->para_file_buf, pBuf, *pBufLen);
 			rtStatus = _SUCCESS;
 		} else
@@ -2925,7 +2925,7 @@ int PHY_ConfigRFWithTxPwrTrackParaFile(struct adapter *Adapter, char *pFileName)
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pHalData->rf_tx_pwr_track_len == 0) && (pHalData->rf_tx_pwr_track == NULL)) {
+	if ((pHalData->rf_tx_pwr_track_len == 0) && !pHalData->rf_tx_pwr_track) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
@@ -3238,7 +3238,7 @@ int PHY_ConfigRFWithPowerLimitTableParaFile(
 
 	memset(pHalData->para_file_buf, 0, MAX_PARA_FILE_BUF_LEN);
 
-	if ((pHalData->rf_tx_pwr_lmt_len == 0) && (pHalData->rf_tx_pwr_lmt == NULL)) {
+	if ((pHalData->rf_tx_pwr_lmt_len == 0) && !pHalData->rf_tx_pwr_lmt) {
 		rtw_merge_string(file_path_bs, PATH_MAX, rtw_phy_file_path, pFileName);
 
 		if (rtw_is_file_readable(file_path_bs) == true) {
Signature · 1 line
2.17.1
#3 lore raw

PATCH v2 3/4 staging: rtl8723bs: hal: Replace variable==NULL comparisions with !variable

In reply to Himadri Pandya

Remove comparision to NULL. Suggested by Coccinelle.

---
Changes in V2:
- Change subject line

---
 drivers/staging/rtl8723bs/hal/hal_btcoex.c | 8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com.c    | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)
drivers/staging/rtl8723bs/hal/hal_btcoex.c +4 -4
index 2b43f6d3c762..8eb28f97ebcc 100644
@@ -75,7 +75,7 @@ static BTCDBGINFO GLBtcDbgInfo;
 
 static void DBG_BT_INFO_INIT(PBTCDBGINFO pinfo, u8 *pbuf, u32 size)
 {
-	if (NULL == pinfo)
+	if (!pinfo)
 		return;
 
 	memset(pinfo, 0, sizeof(BTCDBGINFO));
@@ -95,7 +95,7 @@ void DBG_BT_INFO(u8 *dbgmsg)
 
 	pinfo = &GLBtcDbgInfo;
 
-	if (NULL == pinfo->info)
+	if (!pinfo->info)
 		return;
 
 	msglen = strlen(dbgmsg);
@@ -1571,7 +1571,7 @@ void hal_btcoex_SetDBG(struct adapter *padapter, u32 *pDbgModule)
 	u32 i;
 
 
-	if (NULL == pDbgModule)
+	if (!pDbgModule)
 		return;
 
 	for (i = 0; i < BTC_MSG_MAX; i++)
@@ -1585,7 +1585,7 @@ u32 hal_btcoex_GetDBG(struct adapter *padapter, u8 *pStrBuf, u32 bufSize)
 	u32 leftSize;
 
 
-	if ((NULL == pStrBuf) || (0 == bufSize))
+	if (!pStrBuf || (0 == bufSize))
 		return 0;
 
 	pstr = pStrBuf;
drivers/staging/rtl8723bs/hal/hal_com.c +4 -4
index 7f8ec55b08f1..b97b53c34449 100644
@@ -18,7 +18,7 @@ u8 rtw_hal_data_init(struct adapter *padapter)
 	if (is_primary_adapter(padapter)) {	/* if (padapter->isprimary) */
 		padapter->hal_data_sz = sizeof(struct hal_com_data);
 		padapter->HalData = vzalloc(padapter->hal_data_sz);
-		if (padapter->HalData == NULL) {
+		if (!padapter->HalData) {
 			DBG_8192C("cannot alloc memory for HAL DATA\n");
 			return _FAIL;
 		}
@@ -909,7 +909,7 @@ s32 c2h_evt_read_88xx(struct adapter *adapter, u8 *buf)
 	int i;
 	u8 trigger;
 
-	if (buf == NULL)
+	if (!buf)
 		goto exit;
 
 	trigger = rtw_read8(adapter, REG_C2HEVT_CLEAR);
@@ -982,7 +982,7 @@ void rtw_hal_update_sta_rate_mask(struct adapter *padapter, struct sta_info *pst
 	u8 i, rf_type, limit;
 	u32 tx_ra_bitmap;
 
-	if (psta == NULL)
+	if (!psta)
 		return;
 
 	tx_ra_bitmap = 0;
@@ -1407,7 +1407,7 @@ bool GetHexValueFromString(char *szStr, u32 *pu4bVal, u32 *pu4bMove)
 	char *szScan = szStr;
 
 	/*  Check input parameter. */
-	if (szStr == NULL || pu4bVal == NULL || pu4bMove == NULL) {
+	if (!szStr || !pu4bVal || !pu4bMove) {
 		DBG_871X("GetHexValueFromString(): Invalid input arguments! szStr: %p, pu4bVal: %p, pu4bMove: %p\n",
 			 szStr, pu4bVal, pu4bMove);
 		return false;
Signature · 1 line
2.17.1
#4 lore raw

PATCH v2 4/4 staging: rtl8723bs: hal: Modify comparision to keep constant at right

In reply to Himadri Pandya

Modify comparision statement to keep the constant '0' on right hand side to follow kernel coding style.

---
Changes in V2:
- Add this new change to the patchset

---
 drivers/staging/rtl8723bs/hal/hal_btcoex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/rtl8723bs/hal/hal_btcoex.c +1 -1
index 8eb28f97ebcc..406ec74adc2e 100644
@@ -1585,7 +1585,7 @@ u32 hal_btcoex_GetDBG(struct adapter *padapter, u8 *pStrBuf, u32 bufSize)
 	u32 leftSize;
 
 
-	if (!pStrBuf || (0 == bufSize))
+	if (!pStrBuf || (bufSize == 0))
 		return 0;
 
 	pstr = pStrBuf;
Signature · 1 line
2.17.1
#5 lore raw
In reply to Himadri Pandya
Quoted 10 lines · Himadri Pandya

- This patchset removes comparision to NULL in various files of drivers/staging/rtl8723bs/hal/ .

- The changes are broken into separate patches to keep the length of each patch below/near 100 lines for convinient reviewing.

v2:
- Change subject lines of patches
- Include a new patch to modify comparision with a constant

Quoted 5 lines

Himadri Pandya (4):
staging: rtl8723bs: hal: Remove comparisions to NULL
staging: rtl8723bs: hal: Remove NULL comparisions
staging: rtl8723bs: hal: Replace variable==NULL comparisions with
!variable

Sorry to be picky, but this is not the best way to make unique subjects. The different patches affect different files, so you can put something related to the affected file(s) in the subject line. You may just want to make a series of one file per patch, rather than aiming for 100 lines of changes.

julia

Quoted 19 lines

staging: rtl8723bs: hal: Modify comparision to keep constant at right

 drivers/staging/rtl8723bs/hal/hal_btcoex.c     |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com.c        |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 18 +++++++++---------
 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c   |  8 ++++----
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c |  6 +++---
 5 files changed, 24 insertions(+), 24 deletions(-)

--
2.17.1

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20190316123251.24875-1-himadri18.07%40gmail.com.
For more options, visit https://groups.google.com/d/optout.

#6 lore raw
Quoted 20 lines · Julia Lawall
Quoted 10 lines · Himadri Pandya

- This patchset removes comparision to NULL in various files of drivers/staging/rtl8723bs/hal/ .

- The changes are broken into separate patches to keep the length of each patch below/near 100 lines for convinient reviewing.

v2:
- Change subject lines of patches
- Include a new patch to modify comparision with a constant

Quoted 5 lines

Himadri Pandya (4):
staging: rtl8723bs: hal: Remove comparisions to NULL
staging: rtl8723bs: hal: Remove NULL comparisions
staging: rtl8723bs: hal: Replace variable==NULL comparisions with
!variable

Quoted 8 lines

Sorry to be picky, but this is not the best way to make unique subjects. The different patches affect different files, so you can put something related to the affected file(s) in the subject line. You may just want to make a series of one file per patch, rather than aiming for 100 lines of changes.

julia

That is absolutely a better option. I will do that and send a new version.

Thank you.

- Himadri

Quoted 36 lines
Quoted 10 lines

staging: rtl8723bs: hal: Modify comparision to keep constant at right

 drivers/staging/rtl8723bs/hal/hal_btcoex.c     |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com.c        |  8 ++++----
 drivers/staging/rtl8723bs/hal/hal_com_phycfg.c | 18 +++++++++---------
 drivers/staging/rtl8723bs/hal/rtl8723b_cmd.c   |  8 ++++----
 drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c |  6 +++---
 5 files changed, 24 insertions(+), 24 deletions(-)
Quoted 5 lines

--
2.17.1

--
You received this message because you are subscribed to the Google

Groups "outreachy-kernel" group.

Quoted 1 line

To unsubscribe from this group and stop receiving emails from it, send

an email to [email protected].

Quoted 2 lines

To post to this group, send email to [email protected]. To view this discussion on the web visit

https://groups.google.com/d/msgid/outreachy-kernel/20190316123251.24875-1-himadri18.07%40gmail.com
.

Quoted 2 lines

For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected]. To view this discussion on the web visit
https://groups.google.com/d/msgid/outreachy-kernel/alpine.DEB.2.21.1903161424100.2487%40hadrien
.
For more options, visit https://groups.google.com/d/optout.