arm: kirkwood: lsxl: disable dcache
PATCH 1/1 arm: kirkwood: lsxl: disable dcache
Both the network as well as the USB driver are not working with the data cache enabled.
--- include/configs/lsxl.h | 1 + 1 file changed, 1 insertion(+)
include/configs/lsxl.h +1 -0
@@ -32,6 +32,7 @@#define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_KIRKWOOD_GPIO +#define CONFIG_SYS_DCACHE_OFF /* * Commands configuration
Signature · 1 line
2.11.0
PATCH 1/1 arm: kirkwood: lsxl: disable dcache
Quoted 14 lines · Michael Walle
Both the network as well as the USB driver are not working with the data cache enabled.
Signed-off-by Michael Walle <[email protected]>--- include/configs/lsxl.h | 1 + 1 file changed, 1 insertion(+)include/configs/lsxl.h +0
-0
include/configs/lsxl.h line 36
Quoted 5 lines
include/configs/lsxl.h +1
-0@@ -32,6 +32,7 @@#define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_KIRKWOOD_GPIO +#define CONFIG_SYS_DCACHE_OFF
Having said that I'm wondering if this should be in arch/arm/mach-kirkwood/include/mach/config.h or automatically selected via Kconfig. As far as I can tell prior to commit 93b283d49f93 ("ARM:
CPU: arm926ejs: Consolidate cache routines to common file") the kirkwood boards didn't have and dcache support. It might be possible to update the various drivers to use the proper DMA apis but for 2019.03 I think it might be safer just to run with CONFIG_SYS_DCACHE_OFF.
Quoted 9 lines
include/configs/lsxl.h +0
-1/* * Commands configuration -- 2.11.0
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot