Skip to contentSkip to conversation

ARM: i.MX: extend kindle-mx50 defconfig

PATCH Applied Alexander Kurz 3 participants 5 messages Mar 18, 2019 Arm (32-bit)

lore
Share & tools
lore

Alexander Kurz

author
#0 lore raw

PATCH 1/1 ARM: i.MX: extend kindle-mx50 defconfig

From: Alexander Kurz <[email protected]>

The current defaultenv-kindle-mx50 requires MCI_STARTUP to boot the installed linux. CMD_LOADY is mentioned in the doc for barebox update purposes. FS_EXT4, FS_FAT and FS_FAT_WRITE gives users file system access. Also enable CMD_MEMTEST, CMD_CLK, CMD_REGULATOR and CMD_EDIT for interested users. The extended image will consume 195kB of available 253kB.

Signed-off-by Alexander Kurz <[email protected]>
---
 arch/arm/configs/kindle-mx50_defconfig | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)
arch/arm/configs/kindle-mx50_defconfig +11 -17
index 31bfc9c06..95b505fda 100644
@@ -4,8 +4,8 @@ CONFIG_MACH_KINDLE_MX50=y
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_IMAGE_COMPRESSION_XZKERN=y
 CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
 CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y

@@ -13,7 +13,6 @@ CONFIG_RELOCATABLE=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_FLEXIBLE_BOOTARGS=y
 CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y

@@ -24,47 +23,42 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_CMD_DMESG=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_BOOT=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_LOADY=y
 CONFIG_CMD_RESET=y
-CONFIG_CMD_AUTOMOUNT=y
 CONFIG_CMD_EXPORT=y
-CONFIG_CMD_GLOBAL=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_OF_DUMP=y
 CONFIG_CMD_OFTREE=y
 CONFIG_OFDEVICE=y
-CONFIG_OF_GPIO=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_MTD=y
-CONFIG_MTD_WRITE=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_USB=y
 CONFIG_USB_HOST=y
 CONFIG_USB_IMX_CHIPIDEA=y
 CONFIG_USB_EHCI=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DRIVER_ARC=y
 CONFIG_USB_GADGET_SERIAL=y
 CONFIG_USB_GADGET_FASTBOOT=y
 CONFIG_MCI=y
-CONFIG_MCI_INFO=y
-CONFIG_MCI_WRITE=y
+CONFIG_MCI_STARTUP=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_IMX_ESDHC=y
-CONFIG_PINCTRL=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED=y
 CONFIG_GENERIC_PHY=y
 CONFIG_USB_NOP_XCEIV=y
-CONFIG_FS_AUTOMOUNT=y
-CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
Signature · 7 lines
2.11.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Applied
#1 lore raw
Quoted 8 lines · Alexander Kurz

From: Alexander Kurz <[email protected]>

The current defaultenv-kindle-mx50 requires MCI_STARTUP to boot the installed linux. CMD_LOADY is mentioned in the doc for barebox update purposes. FS_EXT4, FS_FAT and FS_FAT_WRITE gives users file system access. Also enable CMD_MEMTEST, CMD_CLK, CMD_REGULATOR and CMD_EDIT for interested users. The extended image will consume 195kB of available 253kB.

Quoted 4 lines
Signed-off-by Alexander Kurz <[email protected]>
---
 arch/arm/configs/kindle-mx50_defconfig | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

Applied, thanks

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw
In reply to Alexander Kurz
Quoted 7 lines · Alexander Kurz

From: Alexander Kurz <[email protected]>

The current defaultenv-kindle-mx50 requires MCI_STARTUP to boot the installed linux. CMD_LOADY is mentioned in the doc for barebox update purposes. FS_EXT4, FS_FAT and FS_FAT_WRITE gives users file system access. Also enable CMD_MEMTEST, CMD_CLK, CMD_REGULATOR and CMD_EDIT for interested users. The extended image will consume 195kB of available 253kB.

And I guess the removed lines are just things that aren't usable in the first place because of missing hardware, or is it to save space?

- Roland

Quoted 95 lines
Signed-off-by Alexander Kurz <[email protected]>
---
 arch/arm/configs/kindle-mx50_defconfig | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)
arch/arm/configs/kindle-mx50_defconfig +11 -17
index 31bfc9c06..95b505fda 100644
@@ -4,8 +4,8 @@ CONFIG_MACH_KINDLE_MX50=y
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_IMAGE_COMPRESSION_XZKERN=y
 CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
 CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y

@@ -13,7 +13,6 @@ CONFIG_RELOCATABLE=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_FLEXIBLE_BOOTARGS=y
 CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y

@@ -24,47 +23,42 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_CMD_DMESG=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_BOOT=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_LOADY=y
 CONFIG_CMD_RESET=y
-CONFIG_CMD_AUTOMOUNT=y
 CONFIG_CMD_EXPORT=y
-CONFIG_CMD_GLOBAL=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_OF_DUMP=y
 CONFIG_CMD_OFTREE=y
 CONFIG_OFDEVICE=y
-CONFIG_OF_GPIO=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_MTD=y
-CONFIG_MTD_WRITE=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_USB=y
 CONFIG_USB_HOST=y
 CONFIG_USB_IMX_CHIPIDEA=y
 CONFIG_USB_EHCI=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DRIVER_ARC=y
 CONFIG_USB_GADGET_SERIAL=y
 CONFIG_USB_GADGET_FASTBOOT=y
 CONFIG_MCI=y
-CONFIG_MCI_INFO=y
-CONFIG_MCI_WRITE=y
+CONFIG_MCI_STARTUP=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_IMX_ESDHC=y
-CONFIG_PINCTRL=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED=y
 CONFIG_GENERIC_PHY=y
 CONFIG_USB_NOP_XCEIV=y
-CONFIG_FS_AUTOMOUNT=y
-CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
Signature · 7 lines
2.11.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Roland Hieber                     | [email protected]     |
Pengutronix e.K.                  | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#3 lore raw
Quoted 11 lines · Roland Hieber
Quoted 7 lines · Alexander Kurz

From: Alexander Kurz <[email protected]>

The current defaultenv-kindle-mx50 requires MCI_STARTUP to boot the installed linux. CMD_LOADY is mentioned in the doc for barebox update purposes. FS_EXT4, FS_FAT and FS_FAT_WRITE gives users file system access. Also enable CMD_MEMTEST, CMD_CLK, CMD_REGULATOR and CMD_EDIT for interested users. The extended image will consume 195kB of available 253kB.

And I guess the removed lines are just things that aren't usable in the first place because of missing hardware, or is it to save space?

I haven't looked at all of them, but usually they disappear because the options are selected elsewhere and thus can't be disabled.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
author
#4 lore raw
In reply to Roland Hieber

Hi Roland,
all removed lines are now part of a dependency to other config items. make savedefconfig removes all those items. When you re-create a .config, you'll see that all removed config items are still marked =y. Cheers, Alexander

Quoted 104 lines · Roland Hieber
Quoted 7 lines · Alexander Kurz

From: Alexander Kurz <[email protected]>

The current defaultenv-kindle-mx50 requires MCI_STARTUP to boot the installed linux. CMD_LOADY is mentioned in the doc for barebox update purposes. FS_EXT4, FS_FAT and FS_FAT_WRITE gives users file system access. Also enable CMD_MEMTEST, CMD_CLK, CMD_REGULATOR and CMD_EDIT for interested users. The extended image will consume 195kB of available 253kB.

And I guess the removed lines are just things that aren't usable in the first place because of missing hardware, or is it to save space?

- Roland

Quoted 90 lines
Signed-off-by Alexander Kurz <[email protected]>
---
 arch/arm/configs/kindle-mx50_defconfig | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)
arch/arm/configs/kindle-mx50_defconfig +11 -17
index 31bfc9c06..95b505fda 100644
@@ -4,8 +4,8 @@ CONFIG_MACH_KINDLE_MX50=y
 CONFIG_THUMB2_BAREBOX=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
+CONFIG_IMAGE_COMPRESSION_XZKERN=y
 CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
 CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y

@@ -13,7 +13,6 @@ CONFIG_RELOCATABLE=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
-CONFIG_FLEXIBLE_BOOTARGS=y
 CONFIG_BOOTM_SHOW_TYPE=y
 CONFIG_BOOTM_VERBOSE=y
 CONFIG_BOOTM_INITRD=y

@@ -24,47 +23,42 @@ CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
 CONFIG_CMD_DMESG=y
 CONFIG_LONGHELP=y
 CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_BOOT=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_LOADY=y
 CONFIG_CMD_RESET=y
-CONFIG_CMD_AUTOMOUNT=y
 CONFIG_CMD_EXPORT=y
-CONFIG_CMD_GLOBAL=y
 CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
 CONFIG_CMD_FLASH=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
 CONFIG_CMD_USBGADGET=y
-CONFIG_CMD_OF_DUMP=y
 CONFIG_CMD_OFTREE=y
 CONFIG_OFDEVICE=y
-CONFIG_OF_GPIO=y
 CONFIG_OF_BAREBOX_DRIVERS=y
 CONFIG_MTD=y
-CONFIG_MTD_WRITE=y
 CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_USB=y
 CONFIG_USB_HOST=y
 CONFIG_USB_IMX_CHIPIDEA=y
 CONFIG_USB_EHCI=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DRIVER_ARC=y
 CONFIG_USB_GADGET_SERIAL=y
 CONFIG_USB_GADGET_FASTBOOT=y
 CONFIG_MCI=y
-CONFIG_MCI_INFO=y
-CONFIG_MCI_WRITE=y
+CONFIG_MCI_STARTUP=y
 CONFIG_MCI_MMC_BOOT_PARTITIONS=y
 CONFIG_MCI_IMX_ESDHC=y
-CONFIG_PINCTRL=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED=y
 CONFIG_GENERIC_PHY=y
 CONFIG_USB_NOP_XCEIV=y
-CONFIG_FS_AUTOMOUNT=y
-CONFIG_IMAGE_COMPRESSION_XZKERN=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
Signature · 1 line
2.11.0
Quoted 12 lines
Quoted 5 lines

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Signature · 4 lines
Roland Hieber                     | [email protected]     |
Pengutronix e.K.                  | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox