Skip to contentSkip to conversation

ARM: dts: sun8i: a23/a33: Add R_I2C Controller

PATCH In review Maxime Ripard 2 participants 3 messages Mar 18, 2019 – Mar 25, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: sun8i: a23/a33: Add R_I2C Controller

The A23 and A33 both have an I2C controller in the ARISC domain, that share the same pins with the RSB bus.

Even if it's an unusual configuration, that device can be used to drive the PMIC, so let's use it.

---
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm/boot/dts/sun8i-a23-a33.dtsi +20 -0
index 43fe215e83ea..2eed7a2d7d7e 100644
@@ -799,6 +799,20 @@
 			status = "disabled";
 		};
 
+		r_i2c: i2c@1f02400 {
+			compatible = "allwinner,sun8i-a23-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01f02400 0x400>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_i2c_pins>;
+			clocks = <&apb0_gates 6>;
+			resets = <&apb0_rst 6>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -811,6 +825,12 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+				bias-pull-up;
+			};
+
 			r_rsb_pins: r-rsb-pins {
 				pins = "PL0", "PL1";
 				function = "s_rsb";
Signature · 1 line
2.20.1
author Applied
#2 lore raw
Quoted 11 lines · Chen-Yu Tsai
Quoted 8 lines · Maxime Ripard

The A23 and A33 both have an I2C controller in the ARISC domain, that share the same pins with the RSB bus.

Even if it's an unusual configuration, that device can be used to drive the PMIC, so let's use it.

Applied, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com