Skip to contentSkip to conversation

DC states igt tests patch series v9

PATCH In review Anshuman Gupta 3 participants 17 messages Mar 18, 2019 – Apr 11, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover DC states igt tests patch series v9

This patch series adds new tests to validate Display C states. DC states like DC5 and DC6 are validated during PSR entry/exit and during DPMS on/off cycle.

Sending new revision of patch series after addressing review comments and other relevant changes.

1. Changing the name of test from "pm_dc" to "i915_pm_dc" alinged to other PM tests.
2. Changing the DC5/6 counter check timeout from 1 sec to 3 sec,
as in case of PSR it requires more than 2 second to disable DC
power wells after vblank event.
3. Changed the test name from tests/pm_dc to tests tests/i915/i915_pm_dc in name of individual patch.
4. Addressed the review comment by saving POWER_DIR values in igt_disable_runtime_pm().

Jyoti Yadav (5):
lib/igt_pm: igt lib helper routines to support DC5/6 tests tests/i915/i915_pm_dc: Added new test to verify Display C States tests/i915/i915_pm_dc: Added test for DC6 during PSR tests/i915/i915_pm_dc: Added test for DC5 during DPMS tests/i915/i915_pm_dc: Added test for DC6 during DPMS

 lib/igt_pm.c             |  82 ++++++++++++++
 lib/igt_pm.h             |   2 +
 tests/Makefile.sources   |   3 +
 tests/i915/i915_pm_dc.c  | 274 +++++++++++++++++++++++++++++++++++++++++++++++
 tests/i915/i915_pm_rpm.c |  17 +--
 tests/meson.build        |   1 +
 6 files changed, 363 insertions(+), 16 deletions(-)
 create mode 100644 tests/i915/i915_pm_dc.c
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#1 lore raw

PATCH 1/5 lib/igt_pm: igt lib helper routines to support DC5/6 tests

From: Jyoti Yadav <[email protected]>

dmc_loaded() will be used by new test i915_pm_dc.c which will validate Display C States. So moving the same to igt_pm library. Introduced igt_disable_runtime_pm() inorder to disable runtime suspend for the function which support dc9.

v2: Simplify the comment section.
v3: Remove . from the subject line.
v4: Rebased, resolve conflicts in pm_rpm.c
Included patch set version change log.
v5: Listing actual change in patch set changelog to make review easier.
v6: igt's lib added support for disabling runtime suspend, change in commit log.
rebased due to test name pm_rpm changed to i915_pm_rpm.
v7: Addressed review comment by saving POWER_DIR values in igt_disable_runtime_pm().

---
 lib/igt_pm.c             | 82 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_pm.h             |  2 ++
 tests/i915/i915_pm_rpm.c | 17 +---------
 3 files changed, 85 insertions(+), 16 deletions(-)
lib/igt_pm.c +82 -0
index 4902723..0e999b0 100644
@@ -38,6 +38,7 @@
 #include "drmtest.h"
 #include "igt_pm.h"
 #include "igt_aux.h"
+#include "igt_sysfs.h"
 
 /**
  * SECTION:igt_pm
@@ -577,6 +578,60 @@ bool igt_setup_runtime_pm(void)
 	return true;
 }
 
+bool igt_disable_runtime_pm(void)
+{
+	int fd;
+	ssize_t size;
+	char buf[6];
+
+	if (pm_status_fd < 0) {
+		fd = open(POWER_DIR "/autosuspend_delay_ms", O_RDWR);
+		if (fd < 0)
+			return false;
+
+		size = read(fd, __igt_pm_runtime_autosuspend,
+			    sizeof(__igt_pm_runtime_autosuspend));
+
+		if (size <= 0) {
+			close(fd);
+			return false;
+		}
+
+		strchomp(__igt_pm_runtime_autosuspend);
+		igt_install_exit_handler(__igt_pm_runtime_exit_handler);
+		close(fd);
+	}
+
+	/* We know we support runtime PM, let's try to disable it now. */
+	fd = open(POWER_DIR "/control", O_RDWR);
+	igt_assert_f(fd >= 0, "Can't open " POWER_DIR "/control\n");
+
+	if (pm_status_fd < 0) {
+		igt_assert(read(fd, __igt_pm_runtime_control,
+				sizeof(__igt_pm_runtime_control)) > 0);
+		strchomp(__igt_pm_runtime_control);
+
+		igt_debug("Saved runtime power management as '%s' and '%s'\n",
+			  __igt_pm_runtime_autosuspend, __igt_pm_runtime_control);
+	}
+
+	size = write(fd, "on\n", 3);
+	igt_assert(size == 3);
+	lseek(fd, 0, SEEK_SET);
+	size = read(fd, buf, ARRAY_SIZE(buf));
+	igt_assert(size == 3);
+	igt_assert(strncmp(buf, "on\n", 3) == 0);
+	close(fd);
+
+	if (pm_status_fd < 0) {
+		pm_status_fd = open(POWER_DIR "/runtime_status", O_RDONLY);
+		igt_assert_f(pm_status_fd >= 0,
+			     "Can't open " POWER_DIR "/runtime_status\n");
+	}
+
+	return true;
+}
+
 /**
  * igt_get_runtime_pm_status:
  *
@@ -620,3 +675,30 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status)
 {
 	return igt_wait(igt_get_runtime_pm_status() == status, 10000, 100);
 }
+
+/**
+ * dmc_loaded:
+ * @debugfs: fd to the debugfs dir.
+
+ * Check whether DMC FW is loaded or not. DMC FW is require for few Display C
+ * states like DC5 and DC6. FW does the Context Save and Restore during Display
+ * C States entry and exit.
+ *
+ * Returns:
+ * True if DMC FW is loaded otherwise false.
+ */
+bool igt_pm_dmc_loaded(int debugfs)
+{
+	igt_require(debugfs != -1);
+	char buf[15];
+	int len;
+
+	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
+	if (len < 0)
+		return true; /* no CSR support, no DMC requirement */
+
+	buf[len] = '\0';
+
+	igt_info("DMC: %s\n", buf);
+	return strstr(buf, "fw loaded: yes");
+}
lib/igt_pm.h +2 -0
index 10cc679..6c4617a 100644
@@ -47,8 +47,10 @@ enum igt_runtime_pm_status {
 };
 
 bool igt_setup_runtime_pm(void);
+bool igt_disable_runtime_pm(void);
 void igt_restore_runtime_pm(void);
 enum igt_runtime_pm_status igt_get_runtime_pm_status(void);
 bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
+bool igt_pm_dmc_loaded(int debugfs);
 
 #endif /* IGT_PM_H */
tests/i915/i915_pm_rpm.c +1 -16
index be296f5..2d7cb5e 100644
@@ -710,21 +710,6 @@ static void setup_pc8(void)
 	has_pc8 = true;
 }
 
-static bool dmc_loaded(void)
-{
-	char buf[15];
-	int len;
-
-	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
-	if (len < 0)
-	    return true; /* no CSR support, no DMC requirement */
-
-	buf[len] = '\0';
-
-	igt_info("DMC: %s\n", buf);
-	return strstr(buf, "fw loaded: yes");
-}
-
 static void dump_file(int dir, const char *filename)
 {
 	char *contents;
@@ -761,7 +746,7 @@ static bool setup_environment(void)
 	igt_info("Runtime PM support: %d\n", has_runtime_pm);
 	igt_info("PC8 residency support: %d\n", has_pc8);
 	igt_require(has_runtime_pm);
-	igt_require(dmc_loaded());
+	igt_require(igt_pm_dmc_loaded(debugfs));
 
 out:
 	disable_all_screens(&ms_data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#2 lore raw

PATCH 2/5 tests/i915/i915_pm_dc: Added new test to verify Display C States

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

Currently this test validates DC5 upon PSR entry for supported platforms. Added new file for compilation inside Makefile and Meson.

v2: Used the debugfs entry for DC counters instead of Registers.
Used shorter names for variables.
Introduced timeout to read DC counters.
v3: one second timeout is introduced to read DC counters.
Skip the subtest if counters are not available for that platform.
v4: Rebased, to fix compilation error in psr_enable(), psr_wait_entry()
and replaced igt_display_init() by igt_display_require() in pm_rpm.c. Addressed the review comment by removing unused function display_init, removing redundant igt commit suggested by Imre.
Fixed typo in read_dc_counter().
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Rearranged preprocessor directives at one place.
Fixed compilation warning by adding function prototype for dc_state_wait_entry() and check_dc_counter().
Listing actual change in patch set changelog to make review easier.
v6: Fixed "i915_edp_psr_status" string to "Sink support: yes".
v7: Rebased since test name changed from "pm_dc" to "i915_pm_dc",
this will align with other PM tests.
also changed the DC5/6 counter check timeout to 3 second.

---
 tests/Makefile.sources  |   3 +
 tests/i915/i915_pm_dc.c | 209 ++++++++++++++++++++++++++++++++++++++++++++++++
 tests/meson.build       |   1 +
 3 files changed, 213 insertions(+)
 create mode 100644 tests/i915/i915_pm_dc.c
tests/Makefile.sources +3 -0
index 71ccf00..5d6c449 100644
@@ -492,6 +492,9 @@ i915_pm_rc6_residency_SOURCES = i915/i915_pm_rc6_residency.c
 TESTS_progs += i915_pm_rpm
 i915_pm_rpm_SOURCES = i915/i915_pm_rpm.c
 
+TESTS_progs += i915_pm_dc
+i915_pm_dc_SOURCES = i915/i915_pm_dc.c
+
 TESTS_progs += i915_pm_rps
 i915_pm_rps_SOURCES = i915/i915_pm_rps.c
 
tests/i915/i915_pm_dc.c new file +209 -0

209 lines not on this page · raw message

tests/meson.build +1 -0
index 9015f80..9437fad 100644
@@ -221,6 +221,7 @@ i915_progs = [
 	'i915_pm_lpsp',
 	'i915_pm_rc6_residency',
 	'i915_pm_rpm',
+	'i915_pm_dc',
 	'i915_pm_rps',
 	'i915_pm_sseu',
 	'i915_query',
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#3 lore raw

PATCH 3/5 tests/i915/i915_pm_dc: Added test for DC6 during PSR

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

This patch add subtest to check DC6 entry on PSR for the supported platforms.

v2: Rename the subtest with more meaningful name.
v3: Rebased.
v4: Rebased, to fix compilation error in psr_enable().
Addressed review comment by fixing typo in comment description of DC6 PSR subtest.
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.

---
 tests/i915/i915_pm_dc.c | 8 ++++++++
 1 file changed, 8 insertions(+)
tests/i915/i915_pm_dc.c +8 -0
index 004a5c1..66e3e8f 100644
@@ -200,6 +200,14 @@ int main(int argc, char *argv[])
 		test_dc_state_psr(&data, CHECK_DC5);
 	}
 
+	igt_subtest("dc6-psr") {
+		data.op_psr_mode = PSR_MODE_1;
+		psr_enable(data.debugfs_fd, data.op_psr_mode);
+		igt_require_f(edp_psr_sink_support(&data),
+			      "Sink does not support PSR\n");
+		test_dc_state_psr(&data, CHECK_DC6);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/5 tests/i915/i915_pm_dc: Added test for DC5 during DPMS

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

Added new subtest for DC5 entry during DPMS on/off cycle. During DPMS on/off cycle DC5 counter is incremented.

v2: Rename the subtest with meaningful name.
v3: Rebased.
v4: Addressed review comments by removing leftover code

    cleanup().

v5: Addressed the review comment by removing redundant
read_dc_counter() suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Three way patch applied, no functional change.
v7: Disabling runtime suspend for the platfrom which support, DC9.
rebased due to test name pm_dc changed to i915_pm_dc, aligning to other PM tests.
v8: Introduced setup_dc_dpms() in order to disable runtime pm, restoring
POWER_DIR values to its original and enabling runtime pm for other followed sub-tests.

---
 tests/i915/i915_pm_dc.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
tests/i915/i915_pm_dc.c +52 -0
index 66e3e8f..1b14262 100644
@@ -46,6 +46,7 @@ typedef struct {
 	enum psr_mode op_psr_mode;
 	drmModeModeInfo *mode;
 	igt_output_t *output;
+	bool runtime_suspend_disabled;
 } data_t;
 
 bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
@@ -172,6 +173,52 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
 	cleanup(data);
 }
 
+static void setup_dc_dpms(data_t *data)
+{
+	if (IS_BROXTON(data->devid) || IS_GEMINILAKE(data->devid) || IS_ICELAKE(data->devid)) {
+		data->runtime_suspend_disabled = igt_disable_runtime_pm();
+		igt_require_f(data->runtime_suspend_disabled,
+			      "unable to disable runtime pm for i915\n");
+	} else {
+		data->runtime_suspend_disabled = false;
+	}
+}
+
+static void dpms_off_on(data_t *data)
+{
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
+					   DRM_MODE_DPMS_OFF);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED));
+
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd, data->display.outputs[i].config.connector,
+				   DRM_MODE_DPMS_ON);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_ACTIVE));
+}
+
+static void test_dc_state_dpms(data_t *data, int dc_flag)
+{
+	uint32_t dc_counter;
+
+	dc_counter = read_dc_counter(data->drm_fd, dc_flag);
+	dpms_off_on(data);
+	check_dc_counter(data->drm_fd, dc_flag, dc_counter);
+
+	/* if runtime PM is disabled for i915 restore it,
+	 * so any other sub-test can use runtime-PM. */
+	if (data->runtime_suspend_disabled) {
+		igt_restore_runtime_pm();
+		igt_setup_runtime_pm();
+	}
+}
+
 int main(int argc, char *argv[])
 {
 	bool has_runtime_pm;
@@ -208,6 +255,11 @@ int main(int argc, char *argv[])
 		test_dc_state_psr(&data, CHECK_DC6);
 	}
 
+	igt_subtest("dc5-dpms") {
+		setup_dc_dpms(&data);
+		test_dc_state_dpms(&data, CHECK_DC5);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

PATCH 5/5 tests/i915/i915_pm_dc: Added test for DC6 during DPMS

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

Added new subtest for DC6 entry during DPMS on/off cycle. During DPMS on/off cycle DC6 counter is incremented.

v2: Renamed the subtest name.
v3: Rebased.
v4: Addressed review comment by replacing igt_display_init() to
igt_display_require(), changes got done in patch set 2.
v5: Addressed the review comment by removing redundant read_dc_counter()
suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.
v7: Introduced setup_dc_dpms() inorder to disable i915 runtime PM for
the platform supports DC9.

---
 tests/i915/i915_pm_dc.c | 5 +++++
 1 file changed, 5 insertions(+)
tests/i915/i915_pm_dc.c +5 -0
index 1b14262..8587f92 100644
@@ -260,6 +260,11 @@ int main(int argc, char *argv[])
 		test_dc_state_dpms(&data, CHECK_DC5);
 	}
 
+	igt_subtest("dc6-dpms") {
+		setup_dc_dpms(&data);
+		test_dc_state_dpms(&data, CHECK_DC6);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#6 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for DC states igt tests patch series (rev6)

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: DC states igt tests patch series (rev6)
URL : https://patchwork.freedesktop.org/series/56713/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_5765 -> IGTPW_2652
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/6/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2652:

### IGT changes ###

#### Suppressed ####

The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.

* igt@kms_psr@primary_mmap_gtt:
- {fi-icl-y}: NOTRUN -> SKIP +3

Known issues
------------

Here are the changes found in IGTPW_2652 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@amdgpu/amd_cs_nop@sync-fork-compute0:
- fi-icl-u3: NOTRUN -> SKIP [fdo#109315] +17

* igt@gem_exec_basic@gtt-bsd1:
- fi-icl-u3: NOTRUN -> SKIP [fdo#109276] +7

* igt@gem_exec_parse@basic-rejected:
- fi-icl-u3: NOTRUN -> SKIP [fdo#109289] +1

* igt@gem_exec_suspend@basic-s4-devices:
- fi-icl-u3: NOTRUN -> DMESG-WARN [fdo#109638]

* igt@i915_selftest@live_contexts:
- fi-icl-u3: NOTRUN -> DMESG-FAIL [fdo#108569]

* igt@kms_busy@basic-flip-c:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_chamelium@hdmi-crc-fast:
- fi-byt-j1900: NOTRUN -> SKIP [fdo#109271] +52

* igt@kms_chamelium@hdmi-edid-read:
- fi-hsw-peppy: NOTRUN -> SKIP [fdo#109271] +46
- fi-icl-u3: NOTRUN -> SKIP [fdo#109284] +8

* igt@kms_force_connector_basic@prune-stale-modes:
- fi-icl-u3: NOTRUN -> SKIP [fdo#109285] +3

* igt@kms_frontbuffer_tracking@basic:
- fi-icl-u3: NOTRUN -> FAIL [fdo#103167]
- fi-hsw-peppy: NOTRUN -> DMESG-FAIL [fdo#102614] / [fdo#107814]

* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]

#### Possible fixes ####

* igt@i915_pm_rpm@basic-pci-d3-state:
- fi-bsw-kefka: SKIP [fdo#109271] -> PASS

* igt@i915_pm_rpm@basic-rte:
- fi-bsw-kefka: FAIL [fdo#108800] -> PASS

* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: FAIL [fdo#108511] -> PASS

* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: FAIL [fdo#103167] -> PASS

* igt@prime_vgem@basic-fence-flip:
- fi-gdg-551: DMESG-FAIL [fdo#103182] -> PASS

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107814]: https://bugs.freedesktop.org/show_bug.cgi?id=107814
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108800]: https://bugs.freedesktop.org/show_bug.cgi?id=108800
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109638]: https://bugs.freedesktop.org/show_bug.cgi?id=109638

Participating hosts (45 -> 41)
------------------------------

Additional (4): fi-icl-y fi-byt-j1900 fi-hsw-peppy fi-icl-u3
Missing (8): fi-kbl-soraka fi-kbl-7567u fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus

Build changes
-------------

* IGT: IGT_4888 -> IGTPW_2652

CI_DRM_5765: b9d98b738e711c5f3d6b3f6d73ad388571cfc316 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2652: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
IGT_4888: 71ad19eb8fe4f0eecae3bf063e107293b90b9abc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Testlist changes ==

+igt@i915_pm_dc@dc5-dpms
+igt@i915_pm_dc@dc5-psr
+igt@i915_pm_dc@dc6-dpms
+igt@i915_pm_dc@dc6-psr

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#7 lore raw

[igt-dev] ✗ Fi.CI.IGT: failure for DC states igt tests patch series (rev6)

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: DC states igt tests patch series (rev6)
URL : https://patchwork.freedesktop.org/series/56713/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5765_full -> IGTPW_2652_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2652_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2652_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/6/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2652_full:

### IGT changes ###

#### Possible regressions ####

* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> DMESG-WARN

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-apl: NOTRUN -> FAIL

* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-kbl: NOTRUN -> FAIL

New tests
---------

New tests have been introduced between CI_DRM_5765_full and IGTPW_2652_full:

### New IGT tests (4) ###

* igt@i915_pm_dc@dc5-dpms:
- Statuses : 1 fail(s) 2 pass(s) 2 skip(s)
- Exec time: [0.0, 19.73] s

* igt@i915_pm_dc@dc5-psr:
- Statuses : 4 skip(s)
- Exec time: [0.0] s

* igt@i915_pm_dc@dc6-dpms:
- Statuses : 1 fail(s) 4 skip(s)
- Exec time: [0.0, 3.59] s

* igt@i915_pm_dc@dc6-psr:
- Statuses : 5 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_2652_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_isolation@bcs0-s3:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +3

* {igt@i915_pm_dc@dc6-psr} (NEW):
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +7
- shard-snb: NOTRUN -> SKIP [fdo#109271] +3

* igt@kms_atomic_transition@4x-modeset-transitions-nonblocking-fencing:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-c:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]
- shard-kbl: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-pageflip-hang-newfb-render-b:
- shard-glk: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: PASS -> FAIL [fdo#108145]

* igt@kms_color@pipe-b-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]

* igt@kms_cursor_crc@cursor-64x64-random:
- shard-kbl: PASS -> FAIL [fdo#103232] +1

* igt@kms_cursor_crc@cursor-size-change:
- shard-apl: PASS -> FAIL [fdo#103232] +1

* igt@kms_flip@dpms-vs-vblank-race-interruptible:
- shard-glk: PASS -> FAIL [fdo#103060]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-snb: PASS -> SKIP [fdo#109271] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-move:
- shard-kbl: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: PASS -> FAIL [fdo#103167] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-glk: PASS -> FAIL [fdo#103167] +5

* igt@kms_plane_alpha_blend@pipe-b-alpha-opaque-fb:
- shard-apl: PASS -> FAIL [fdo#108145]

* igt@kms_plane_scaling@pipe-a-scaler-with-clipping-clamping:
- shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_psr@sprite_plane_onoff:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +13

* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-glk: PASS -> DMESG-FAIL [fdo#105763] / [fdo#106538]

* igt@kms_setmode@basic:
- shard-apl: PASS -> FAIL [fdo#99912]

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1

* igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend:
- shard-kbl: PASS -> FAIL [fdo#104894]
- shard-apl: PASS -> FAIL [fdo#104894]

* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +28

#### Possible fixes ####

* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS +1

* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: FAIL [fdo#103232] -> PASS +3

* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103191] / [fdo#103232] -> PASS

* igt@kms_flip@blocking-absolute-wf_vblank-interruptible:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: FAIL [fdo#103167] -> PASS +3

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS +1
- shard-kbl: FAIL [fdo#103167] -> PASS +1

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS

* {igt@kms_plane@pixel-format-pipe-a-planes-source-clamping}:
- shard-apl: FAIL [fdo#110033] -> PASS
- shard-kbl: FAIL [fdo#110127] -> PASS

* {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
- shard-glk: FAIL [fdo#110037] -> PASS +1

* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-modeset:
- shard-kbl: FAIL [fdo#104894] -> PASS
- shard-apl: FAIL [fdo#104894] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-hsw: FAIL [fdo#104894] -> PASS

#### Warnings ####

* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-glk: FAIL [fdo#110098] -> SKIP [fdo#109271] / [fdo#109278]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#106538]: https://bugs.freedesktop.org/show_bug.cgi?id=106538
[fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#110033]: https://bugs.freedesktop.org/show_bug.cgi?id=110033
[fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
[fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
[fdo#110098]: https://bugs.freedesktop.org/show_bug.cgi?id=110098
[fdo#110127]: https://bugs.freedesktop.org/show_bug.cgi?id=110127
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 5)
------------------------------

Missing (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u

Build changes
-------------

* IGT: IGT_4888 -> IGTPW_2652
* Piglit: piglit_4509 -> None

CI_DRM_5765: b9d98b738e711c5f3d6b3f6d73ad388571cfc316 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2652: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
IGT_4888: 71ad19eb8fe4f0eecae3bf063e107293b90b9abc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#8 lore raw

Re: [igt-dev] ✗ Fi.CI.IGT: failure for DC states igt tests patch series (rev6)

Hi Imre ,
Few failures dc5-dpms on apl and dc6-dpms on kbl seems to be genuine failures, at my local setup there were no such failures on KBL and GLK. How to proceed with these failures, shall i send a test version of series with debug logs for DC counters in order to move these failures as known failures.
Thanks,
Anshuman Gupta.

Quoted 255 lines · Patchwork

== Series Details ==

Series: DC states igt tests patch series (rev6)
URL : https://patchwork.freedesktop.org/series/56713/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5765_full -> IGTPW_2652_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2652_full absolutely need to be verified manually.

If you think the reported changes have nothing to do with the changes introduced in IGTPW_2652_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/6/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2652_full:

### IGT changes ###

#### Possible regressions ####

* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> DMESG-WARN

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-apl: NOTRUN -> FAIL

* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-kbl: NOTRUN -> FAIL

New tests
---------

New tests have been introduced between CI_DRM_5765_full and IGTPW_2652_full:

### New IGT tests (4) ###

* igt@i915_pm_dc@dc5-dpms:
- Statuses : 1 fail(s) 2 pass(s) 2 skip(s)
- Exec time: [0.0, 19.73] s

* igt@i915_pm_dc@dc5-psr:
- Statuses : 4 skip(s)
- Exec time: [0.0] s

* igt@i915_pm_dc@dc6-dpms:
- Statuses : 1 fail(s) 4 skip(s)
- Exec time: [0.0, 3.59] s

* igt@i915_pm_dc@dc6-psr:
- Statuses : 5 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_2652_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_isolation@bcs0-s3:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +3

* {igt@i915_pm_dc@dc6-psr} (NEW):
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +7
- shard-snb: NOTRUN -> SKIP [fdo#109271] +3

* igt@kms_atomic_transition@4x-modeset-transitions-nonblocking-fencing:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-c:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]
- shard-kbl: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-pageflip-hang-newfb-render-b:
- shard-glk: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: PASS -> FAIL [fdo#108145]

* igt@kms_color@pipe-b-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]

* igt@kms_cursor_crc@cursor-64x64-random:
- shard-kbl: PASS -> FAIL [fdo#103232] +1

* igt@kms_cursor_crc@cursor-size-change:
- shard-apl: PASS -> FAIL [fdo#103232] +1

* igt@kms_flip@dpms-vs-vblank-race-interruptible:
- shard-glk: PASS -> FAIL [fdo#103060]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-snb: PASS -> SKIP [fdo#109271] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-move:
- shard-kbl: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: PASS -> FAIL [fdo#103167] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-glk: PASS -> FAIL [fdo#103167] +5

* igt@kms_plane_alpha_blend@pipe-b-alpha-opaque-fb:
- shard-apl: PASS -> FAIL [fdo#108145]

* igt@kms_plane_scaling@pipe-a-scaler-with-clipping-clamping:
- shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_psr@sprite_plane_onoff:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +13

* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-glk: PASS -> DMESG-FAIL [fdo#105763] / [fdo#106538]

* igt@kms_setmode@basic:
- shard-apl: PASS -> FAIL [fdo#99912]

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1

* igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend:
- shard-kbl: PASS -> FAIL [fdo#104894]
- shard-apl: PASS -> FAIL [fdo#104894]

* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +28

#### Possible fixes ####

* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS +1

* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: FAIL [fdo#103232] -> PASS +3

* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103191] / [fdo#103232] -> PASS

* igt@kms_flip@blocking-absolute-wf_vblank-interruptible:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: FAIL [fdo#103167] -> PASS +3

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS +1
- shard-kbl: FAIL [fdo#103167] -> PASS +1

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS

* {igt@kms_plane@pixel-format-pipe-a-planes-source-clamping}:
- shard-apl: FAIL [fdo#110033] -> PASS
- shard-kbl: FAIL [fdo#110127] -> PASS

* {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
- shard-glk: FAIL [fdo#110037] -> PASS +1

* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-modeset:
- shard-kbl: FAIL [fdo#104894] -> PASS
- shard-apl: FAIL [fdo#104894] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-hsw: FAIL [fdo#104894] -> PASS

#### Warnings ####

   * igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
     - shard-glk:          FAIL [fdo#110098] -> SKIP [fdo#109271] / [fdo#109278]

   
   {name}: This element is suppressed. This means it is ignored when computing
           the status of the difference (SUCCESS, WARNING, or FAILURE).

   [fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
   [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
   [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
   [fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
   [fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
   [fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
   [fdo#106538]: https://bugs.freedesktop.org/show_bug.cgi?id=106538
   [fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
   [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
   [fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
   [fdo#110033]: https://bugs.freedesktop.org/show_bug.cgi?id=110033
   [fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
   [fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
   [fdo#110098]: https://bugs.freedesktop.org/show_bug.cgi?id=110098
   [fdo#110127]: https://bugs.freedesktop.org/show_bug.cgi?id=110127
   [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 5)
------------------------------

   Missing    (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u

Build changes
-------------

* IGT: IGT_4888 -> IGTPW_2652
* Piglit: piglit_4509 -> None

Quoted 9 lines
   CI_DRM_5765: b9d98b738e711c5f3d6b3f6d73ad388571cfc316 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2652: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
   IGT_4888: 71ad19eb8fe4f0eecae3bf063e107293b90b9abc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
   piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#9 lore raw

Re: [igt-dev] ✗ Fi.CI.IGT: failure for DC states igt tests patch series (rev6)

Quoted 3 lines · Anshuman

Hi Imre ,
Few failures dc5-dpms on apl and dc6-dpms on kbl seems to be genuine failures, at my local setup there were no such failures on KBL and GLK.

For the APL fail, I can only think of the HDA driver holding a power reference until it runtime suspends. So even if we disable runtime PM for i915, we still need to wait for the HDA driver to runtime suspend.

I'm not sure about the KBL failure. DC6 does get enabled, but AFAIR even though DMC will go through its context save/restore sequence the DC6 counter will only increase if a deeper package state is actually reached. So someone needs to check this machine (and any future machine this CI test will run on) and make sure this deeper package state is not blocked by some other peripheral. USB, network, SSD are likely suspects.

Quoted 264 lines

How to proceed with these failures, shall i send a test version of series with debug logs for DC counters in order to move these failures as known failures.
Thanks,
Anshuman Gupta.

Quoted 258 lines · Patchwork

== Series Details ==

Series: DC states igt tests patch series (rev6)
URL : https://patchwork.freedesktop.org/series/56713/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5765_full -> IGTPW_2652_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2652_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2652_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

   External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/6/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2652_full:

### IGT changes ###

#### Possible regressions ####

* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> DMESG-WARN

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-apl: NOTRUN -> FAIL

* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-kbl: NOTRUN -> FAIL

New tests
---------

New tests have been introduced between CI_DRM_5765_full and IGTPW_2652_full:

### New IGT tests (4) ###

* igt@i915_pm_dc@dc5-dpms:
- Statuses : 1 fail(s) 2 pass(s) 2 skip(s)
- Exec time: [0.0, 19.73] s

* igt@i915_pm_dc@dc5-psr:
- Statuses : 4 skip(s)
- Exec time: [0.0] s

* igt@i915_pm_dc@dc6-dpms:
- Statuses : 1 fail(s) 4 skip(s)
- Exec time: [0.0, 3.59] s

* igt@i915_pm_dc@dc6-psr:
- Statuses : 5 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_2652_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_isolation@bcs0-s3:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +3

* {igt@i915_pm_dc@dc6-psr} (NEW):
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +7
- shard-snb: NOTRUN -> SKIP [fdo#109271] +3

* igt@kms_atomic_transition@4x-modeset-transitions-nonblocking-fencing:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-c:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]
- shard-kbl: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-pageflip-hang-newfb-render-b:
- shard-glk: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: PASS -> FAIL [fdo#108145]

* igt@kms_color@pipe-b-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]

* igt@kms_cursor_crc@cursor-64x64-random:
- shard-kbl: PASS -> FAIL [fdo#103232] +1

* igt@kms_cursor_crc@cursor-size-change:
- shard-apl: PASS -> FAIL [fdo#103232] +1

* igt@kms_flip@dpms-vs-vblank-race-interruptible:
- shard-glk: PASS -> FAIL [fdo#103060]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-snb: PASS -> SKIP [fdo#109271] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-move:
- shard-kbl: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: PASS -> FAIL [fdo#103167] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-glk: PASS -> FAIL [fdo#103167] +5

* igt@kms_plane_alpha_blend@pipe-b-alpha-opaque-fb:
- shard-apl: PASS -> FAIL [fdo#108145]

* igt@kms_plane_scaling@pipe-a-scaler-with-clipping-clamping:
- shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_psr@sprite_plane_onoff:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +13

* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-glk: PASS -> DMESG-FAIL [fdo#105763] / [fdo#106538]

* igt@kms_setmode@basic:
- shard-apl: PASS -> FAIL [fdo#99912]

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1

* igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend:
- shard-kbl: PASS -> FAIL [fdo#104894]
- shard-apl: PASS -> FAIL [fdo#104894]

* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +28

#### Possible fixes ####

* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS +1

* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: FAIL [fdo#103232] -> PASS +3

* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103191] / [fdo#103232] -> PASS

* igt@kms_flip@blocking-absolute-wf_vblank-interruptible:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: FAIL [fdo#103167] -> PASS +3

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS +1
- shard-kbl: FAIL [fdo#103167] -> PASS +1

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS

* {igt@kms_plane@pixel-format-pipe-a-planes-source-clamping}:
- shard-apl: FAIL [fdo#110033] -> PASS
- shard-kbl: FAIL [fdo#110127] -> PASS

* {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
- shard-glk: FAIL [fdo#110037] -> PASS +1

* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-modeset:
- shard-kbl: FAIL [fdo#104894] -> PASS
- shard-apl: FAIL [fdo#104894] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-hsw: FAIL [fdo#104894] -> PASS

#### Warnings ####

   * igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
     - shard-glk:          FAIL [fdo#110098] -> SKIP [fdo#109271] / [fdo#109278]

   {name}: This element is suppressed. This means it is ignored when computing
           the status of the difference (SUCCESS, WARNING, or FAILURE).

   [fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
   [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
   [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
   [fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
   [fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
   [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
   [fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
   [fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
   [fdo#106538]: https://bugs.freedesktop.org/show_bug.cgi?id=106538
   [fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
   [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
   [fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
   [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
   [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
   [fdo#110033]: https://bugs.freedesktop.org/show_bug.cgi?id=110033
   [fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
   [fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
   [fdo#110098]: https://bugs.freedesktop.org/show_bug.cgi?id=110098
   [fdo#110127]: https://bugs.freedesktop.org/show_bug.cgi?id=110127
   [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 5)
------------------------------

   Missing    (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u

Build changes
-------------

* IGT: IGT_4888 -> IGTPW_2652
* Piglit: piglit_4509 -> None

   CI_DRM_5765: b9d98b738e711c5f3d6b3f6d73ad388571cfc316 @ git://anongit.freedesktop.org/gfx-ci/linux
   IGTPW_2652: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
   IGT_4888: 71ad19eb8fe4f0eecae3bf063e107293b90b9abc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
   piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#10 lore raw

Re: [igt-dev] ✗ Fi.CI.IGT: failure for DC states igt tests patch series (rev6)

Hi,

Quoted 10 lines · Imre Deak
Quoted 3 lines · Anshuman

Hi Imre ,
Few failures dc5-dpms on apl and dc6-dpms on kbl seems to be genuine failures, at my local setup there were no such failures on KBL and GLK.

For the APL fail, I can only think of the HDA driver holding a power reference until it runtime suspends. So even if we disable runtime PM for i915, we still need to wait for the HDA driver to runtime suspend.

Quoted 7 lines

I'm not sure about the KBL failure. DC6 does get enabled, but AFAIR even though DMC will go through its context save/restore sequence the DC6 counter will only increase if a deeper package state is actually reached. So someone needs to check this machine (and any future machine this CI test will run on) and make sure this deeper package state is not blocked by some other peripheral. USB, network, SSD are likely suspects.

PC8+ residency test failure also observed on KBL.
https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2709/shard-kbl5/igt@[email protected]

Quoted 1 line

Jani,

Whom to reach out to make sure KBL CI machine and other ICL,SKL reaches deeper package states.
Thanks,
Anshuman Gupta.

Quoted 260 lines
Quoted 260 lines

How to proceed with these failures, shall i send a test version of series with debug logs for DC counters in order to move these failures as known failures.
Thanks,
Anshuman Gupta.

Quoted 254 lines · Patchwork

== Series Details ==

Series: DC states igt tests patch series (rev6)
URL : https://patchwork.freedesktop.org/series/56713/
State : failure

== Summary ==

CI Bug Log - changes from CI_DRM_5765_full -> IGTPW_2652_full
====================================================

Summary
-------

**FAILURE**

Serious unknown changes coming with IGTPW_2652_full absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2652_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.

External URL: https://patchwork.freedesktop.org/api/1.0/series/56713/revisions/6/mbox/

Possible new issues
-------------------

Here are the unknown changes that may have been introduced in IGTPW_2652_full:

### IGT changes ###

#### Possible regressions ####

* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> DMESG-WARN

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-apl: NOTRUN -> FAIL

* {igt@i915_pm_dc@dc6-dpms} (NEW):
- shard-kbl: NOTRUN -> FAIL

New tests
---------

New tests have been introduced between CI_DRM_5765_full and IGTPW_2652_full:

### New IGT tests (4) ###

* igt@i915_pm_dc@dc5-dpms:
- Statuses : 1 fail(s) 2 pass(s) 2 skip(s)
- Exec time: [0.0, 19.73] s

* igt@i915_pm_dc@dc5-psr:
- Statuses : 4 skip(s)
- Exec time: [0.0] s

* igt@i915_pm_dc@dc6-dpms:
- Statuses : 1 fail(s) 4 skip(s)
- Exec time: [0.0, 3.59] s

* igt@i915_pm_dc@dc6-psr:
- Statuses : 5 skip(s)
- Exec time: [0.0] s

Known issues
------------

Here are the changes found in IGTPW_2652_full that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_ctx_isolation@bcs0-s3:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]

* igt@gem_partial_pwrite_pread@writes-after-reads:
- shard-apl: PASS -> INCOMPLETE [fdo#103927]

* {igt@i915_pm_dc@dc5-dpms} (NEW):
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +3

* {igt@i915_pm_dc@dc6-psr} (NEW):
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +7
- shard-snb: NOTRUN -> SKIP [fdo#109271] +3

* igt@kms_atomic_transition@4x-modeset-transitions-nonblocking-fencing:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-apl: NOTRUN -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-c:
- shard-hsw: PASS -> DMESG-WARN [fdo#107956]
- shard-kbl: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_busy@extended-pageflip-hang-newfb-render-b:
- shard-glk: PASS -> DMESG-WARN [fdo#107956]

* igt@kms_ccs@pipe-b-crc-sprite-planes-basic:
- shard-glk: PASS -> FAIL [fdo#108145]

* igt@kms_color@pipe-b-ctm-max:
- shard-apl: PASS -> FAIL [fdo#108147]

* igt@kms_cursor_crc@cursor-256x256-suspend:
- shard-apl: PASS -> FAIL [fdo#103191] / [fdo#103232]

* igt@kms_cursor_crc@cursor-64x64-random:
- shard-kbl: PASS -> FAIL [fdo#103232] +1

* igt@kms_cursor_crc@cursor-size-change:
- shard-apl: PASS -> FAIL [fdo#103232] +1

* igt@kms_flip@dpms-vs-vblank-race-interruptible:
- shard-glk: PASS -> FAIL [fdo#103060]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-draw-mmap-gtt:
- shard-snb: PASS -> SKIP [fdo#109271] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-cur-indfb-move:
- shard-kbl: PASS -> FAIL [fdo#103167]

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: PASS -> FAIL [fdo#103167] +2

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-move:
- shard-glk: PASS -> FAIL [fdo#103167] +5

* igt@kms_plane_alpha_blend@pipe-b-alpha-opaque-fb:
- shard-apl: PASS -> FAIL [fdo#108145]

* igt@kms_plane_scaling@pipe-a-scaler-with-clipping-clamping:
- shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278]

* igt@kms_psr@sprite_plane_onoff:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +13

* igt@kms_rotation_crc@multiplane-rotation-cropping-top:
- shard-glk: PASS -> DMESG-FAIL [fdo#105763] / [fdo#106538]

* igt@kms_setmode@basic:
- shard-apl: PASS -> FAIL [fdo#99912]

* igt@kms_universal_plane@disable-primary-vs-flip-pipe-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1

* igt@kms_vblank@pipe-b-ts-continuation-dpms-suspend:
- shard-kbl: PASS -> FAIL [fdo#104894]
- shard-apl: PASS -> FAIL [fdo#104894]

* igt@prime_nv_api@i915_nv_reimport_twice_check_flink_name:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +28

#### Possible fixes ####

* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#107956] -> PASS +1

* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS +1

* igt@kms_cursor_crc@cursor-64x21-random:
- shard-apl: FAIL [fdo#103232] -> PASS +3

* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103191] / [fdo#103232] -> PASS

* igt@kms_flip@blocking-absolute-wf_vblank-interruptible:
- shard-apl: INCOMPLETE [fdo#103927] -> PASS

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: FAIL [fdo#103167] -> PASS +3

* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-glk: FAIL [fdo#103167] -> PASS +1
- shard-kbl: FAIL [fdo#103167] -> PASS +1

* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-c:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS

* {igt@kms_plane@pixel-format-pipe-a-planes-source-clamping}:
- shard-apl: FAIL [fdo#110033] -> PASS
- shard-kbl: FAIL [fdo#110127] -> PASS

* {igt@kms_plane_multiple@atomic-pipe-c-tiling-none}:
- shard-glk: FAIL [fdo#110037] -> PASS +1

* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: DMESG-FAIL [fdo#105763] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-modeset:
- shard-kbl: FAIL [fdo#104894] -> PASS
- shard-apl: FAIL [fdo#104894] -> PASS

* igt@kms_vblank@pipe-c-ts-continuation-suspend:
- shard-hsw: FAIL [fdo#104894] -> PASS

#### Warnings ####

    * igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
      - shard-glk:          FAIL [fdo#110098] -> SKIP [fdo#109271] / [fdo#109278]

    {name}: This element is suppressed. This means it is ignored when computing
            the status of the difference (SUCCESS, WARNING, or FAILURE).

    [fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
    [fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
    [fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
    [fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
    [fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
    [fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
    [fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
    [fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
    [fdo#106538]: https://bugs.freedesktop.org/show_bug.cgi?id=106538
    [fdo#107956]: https://bugs.freedesktop.org/show_bug.cgi?id=107956
    [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
    [fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
    [fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
    [fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
    [fdo#110033]: https://bugs.freedesktop.org/show_bug.cgi?id=110033
    [fdo#110037]: https://bugs.freedesktop.org/show_bug.cgi?id=110037
    [fdo#110038]: https://bugs.freedesktop.org/show_bug.cgi?id=110038
    [fdo#110098]: https://bugs.freedesktop.org/show_bug.cgi?id=110098
    [fdo#110127]: https://bugs.freedesktop.org/show_bug.cgi?id=110127
    [fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912

Participating hosts (10 -> 5)
------------------------------

    Missing    (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u

Build changes
-------------

      * IGT: IGT_4888 -> IGTPW_2652
      * Piglit: piglit_4509 -> None

    CI_DRM_5765: b9d98b738e711c5f3d6b3f6d73ad388571cfc316 @ git://anongit.freedesktop.org/gfx-ci/linux
    IGTPW_2652: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/
    IGT_4888: 71ad19eb8fe4f0eecae3bf063e107293b90b9abc @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
    piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2652/

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

#11 lore raw

v9 cover DC states igt tests patch series v9

In reply to Anshuman Gupta

This patch series adds new tests to validate Display C states.
DC states like DC5 and DC6 are validated during PSR entry/exit and during DPMS on/off cycle.

Sending new revision of patch series after addressing review comments and other relevant changes.

1. Changing the name of test from "pm_dc" to "i915_pm_dc" alinged to other PM tests.
2. Changing the DC5/6 counter check timeout from 1 sec to 3 sec,
as in case of PSR it requires more than 2 second to disable DC
power wells after vblank event.
3. Changed the test name from tests/pm_dc to tests tests/i915/i915_pm_dc in name of individual patch.
4. Addressed the review comment by saving POWER_DIR values in igt_disable_runtime_pm().
5. CI fixures for dc5-dpms failure.
Checking DC5 counter value after DPMS off, broke the dpms_on_off function to dpms_on and dpms_off.

Jyoti Yadav (5):
lib/igt_pm: igt lib helper routines to support DC5/6 tests tests/i915/i915_pm_dc: Added new test to verify Display C States tests/i915/i915_pm_dc: Added test for DC6 during PSR tests/i915/i915_pm_dc: Added test for DC5 during DPMS tests/i915/i915_pm_dc: Added test for DC6 during DPMS

 lib/igt_pm.c             |  83 ++++++++++++++
 lib/igt_pm.h             |   2 +
 tests/Makefile.sources   |   3 +
 tests/i915/i915_pm_dc.c  | 285 +++++++++++++++++++++++++++++++++++++++++++++++
 tests/i915/i915_pm_rpm.c |  17 +--
 tests/meson.build        |   1 +
 6 files changed, 375 insertions(+), 16 deletions(-)
 create mode 100644 tests/i915/i915_pm_dc.c
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#12 lore raw

PATCH v9 1/5 lib/igt_pm: igt lib helper routines to support DC5/6 tests

From: Jyoti Yadav <[email protected]>

dmc_loaded() will be used by new test i915_pm_dc.c which will validate Display C States. So moving the same to igt_pm library. Introduced igt_disable_runtime_pm() in order to disable runtime suspend for the function which support dc9.

v2: Simplify the comment section.
v3: Remove . from the subject line.
v4: Rebased, resolve conflicts in pm_rpm.c
Included patch set version change log.
v5: Listing actual change in patch set changelog to make review easier.
v6: igt's lib added support for disabling runtime suspend,
change in commit log. rebased due to test name pm_rpm changed to i915_pm_rpm.
v7: Addressed review comment by saving POWER_DIR values in
igt_disable_runtime_pm(). [Imre]

---
 lib/igt_pm.c             | 83 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_pm.h             |  2 ++
 tests/i915/i915_pm_rpm.c | 17 +---------
 3 files changed, 86 insertions(+), 16 deletions(-)
lib/igt_pm.c +83 -0
index fd22273..6539428 100644
@@ -38,6 +38,7 @@
 #include "drmtest.h"
 #include "igt_pm.h"
 #include "igt_aux.h"
+#include "igt_sysfs.h"
 
 /**
  * SECTION:igt_pm
@@ -585,6 +586,61 @@ bool igt_setup_runtime_pm(void)
 	return true;
 }
 
+bool igt_disable_runtime_pm(void)
+{
+	int fd;
+	ssize_t size;
+	char buf[6];
+
+	if (pm_status_fd < 0) {
+		fd = open(POWER_DIR "/autosuspend_delay_ms", O_RDWR);
+		if (fd < 0)
+			return false;
+
+		size = read(fd, __igt_pm_runtime_autosuspend,
+			    sizeof(__igt_pm_runtime_autosuspend));
+
+		if (size <= 0) {
+			close(fd);
+			return false;
+		}
+
+		strchomp(__igt_pm_runtime_autosuspend);
+		igt_install_exit_handler(__igt_pm_runtime_exit_handler);
+		close(fd);
+	}
+
+	/* We know we support runtime PM, let's try to disable it now. */
+	fd = open(POWER_DIR "/control", O_RDWR);
+	igt_assert_f(fd >= 0, "Can't open " POWER_DIR "/control\n");
+
+	if (pm_status_fd < 0) {
+		igt_assert(read(fd, __igt_pm_runtime_control,
+				sizeof(__igt_pm_runtime_control)) > 0);
+		strchomp(__igt_pm_runtime_control);
+
+		igt_debug("Saved runtime power management as '%s' and '%s'\n",
+			  __igt_pm_runtime_autosuspend,
+			  __igt_pm_runtime_control);
+	}
+
+	size = write(fd, "on\n", 3);
+	igt_assert(size == 3);
+	lseek(fd, 0, SEEK_SET);
+	size = read(fd, buf, ARRAY_SIZE(buf));
+	igt_assert(size == 3);
+	igt_assert(strncmp(buf, "on\n", 3) == 0);
+	close(fd);
+
+	if (pm_status_fd < 0) {
+		pm_status_fd = open(POWER_DIR "/runtime_status", O_RDONLY);
+		igt_assert_f(pm_status_fd >= 0,
+			     "Can't open " POWER_DIR "/runtime_status\n");
+	}
+
+	return true;
+}
+
 /**
  * igt_get_runtime_pm_status:
  *
@@ -628,3 +684,30 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status)
 {
 	return igt_wait(igt_get_runtime_pm_status() == status, 10000, 100);
 }
+
+/**
+ * dmc_loaded:
+ * @debugfs: fd to the debugfs dir.
+
+ * Check whether DMC FW is loaded or not. DMC FW is require for few Display C
+ * states like DC5 and DC6. FW does the Context Save and Restore during Display
+ * C States entry and exit.
+ *
+ * Returns:
+ * True if DMC FW is loaded otherwise false.
+ */
+bool igt_pm_dmc_loaded(int debugfs)
+{
+	igt_require(debugfs != -1);
+	char buf[15];
+	int len;
+
+	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
+	if (len < 0)
+		return true; /* no CSR support, no DMC requirement */
+
+	buf[len] = '\0';
+
+	igt_info("DMC: %s\n", buf);
+	return strstr(buf, "fw loaded: yes");
+}
lib/igt_pm.h +2 -0
index 10cc679..6c4617a 100644
@@ -47,8 +47,10 @@ enum igt_runtime_pm_status {
 };
 
 bool igt_setup_runtime_pm(void);
+bool igt_disable_runtime_pm(void);
 void igt_restore_runtime_pm(void);
 enum igt_runtime_pm_status igt_get_runtime_pm_status(void);
 bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
+bool igt_pm_dmc_loaded(int debugfs);
 
 #endif /* IGT_PM_H */
tests/i915/i915_pm_rpm.c +1 -16
index a2c9d0e..0c3b4e5 100644
@@ -710,21 +710,6 @@ static void setup_pc8(void)
 	has_pc8 = true;
 }
 
-static bool dmc_loaded(void)
-{
-	char buf[15];
-	int len;
-
-	len = igt_sysfs_read(debugfs, "i915_dmc_info", buf, sizeof(buf) - 1);
-	if (len < 0)
-	    return true; /* no CSR support, no DMC requirement */
-
-	buf[len] = '\0';
-
-	igt_info("DMC: %s\n", buf);
-	return strstr(buf, "fw loaded: yes");
-}
-
 static void dump_file(int dir, const char *filename)
 {
 	char *contents;
@@ -759,7 +744,7 @@ static bool setup_environment(void)
 	igt_info("Runtime PM support: %d\n", has_runtime_pm);
 	igt_info("PC8 residency support: %d\n", has_pc8);
 	igt_require(has_runtime_pm);
-	igt_require(dmc_loaded());
+	igt_require(igt_pm_dmc_loaded(debugfs));
 
 out:
 	disable_all_screens(&ms_data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#13 lore raw

PATCH v9 3/5 tests/i915/i915_pm_dc: Added test for DC6 during PSR

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

This patch add subtest to check DC6 entry on PSR for the supported platforms.

v2: Rename the subtest with more meaningful name.
v3: Rebased.
v4: Rebased, to fix compilation error in psr_enable().
Addressed review comment by fixing typo in comment description of DC6 PSR subtest.
v5: Addressed the review comment by removing redundant read_dc_counter(),
clubbed cleanup() function in test_dc_state_psr() suggested by Imre. Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.

---
 tests/i915/i915_pm_dc.c | 8 ++++++++
 1 file changed, 8 insertions(+)
tests/i915/i915_pm_dc.c +8 -0
index 6c2b4c1..c458b1e 100644
@@ -201,6 +201,14 @@ int main(int argc, char *argv[])
 		test_dc_state_psr(&data, CHECK_DC5);
 	}
 
+	igt_subtest("dc6-psr") {
+		data.op_psr_mode = PSR_MODE_1;
+		psr_enable(data.debugfs_fd, data.op_psr_mode);
+		igt_require_f(edp_psr_sink_support(&data),
+			      "Sink does not support PSR\n");
+		test_dc_state_psr(&data, CHECK_DC6);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#14 lore raw

PATCH v9 4/5 tests/i915/i915_pm_dc: Added test for DC5 during DPMS

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

Added new subtest for DC5 entry during DPMS on/off cycle. During DPMS on/off cycle DC5 counter is incremented.

v2: Rename the subtest with meaningful name.
v3: Rebased.
v4: Addressed review comments by removing leftover code

    cleanup().

v5: Addressed the review comment by removing redundant
read_dc_counter() suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Three way patch applied, no functional change.
v7: Disabling runtime suspend for the platform which support, DC9.
rebased due to test name pm_dc changed to i915_pm_dc, aligning to other PM tests.
v8: Introduced setup_dc_dpms() in order to disable runtime pm, restoring
POWER_DIR values to its original and enabling runtime pm for other followed sub-tests.
v9: Check DC5 counter value after DPMS off, broke the dpms_on_off
function to dpms_on and dpms_off. [Imre]

---
 tests/i915/i915_pm_dc.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)
tests/i915/i915_pm_dc.c +62 -0
index c458b1e..338ed70 100644
@@ -46,6 +46,7 @@ typedef struct {
 	enum psr_mode op_psr_mode;
 	drmModeModeInfo *mode;
 	igt_output_t *output;
+	bool runtime_suspend_disabled;
 } data_t;
 
 bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count);
@@ -173,6 +174,62 @@ static void test_dc_state_psr(data_t *data, int dc_flag)
 	cleanup(data);
 }
 
+static void setup_dc_dpms(data_t *data)
+{
+	if (IS_BROXTON(data->devid) || IS_GEMINILAKE(data->devid) ||
+		IS_ICELAKE(data->devid)) {
+		data->runtime_suspend_disabled = igt_disable_runtime_pm();
+		igt_require_f(data->runtime_suspend_disabled,
+			      "unable to disable runtime pm for i915\n");
+	} else {
+		data->runtime_suspend_disabled = false;
+	}
+}
+
+static void dpms_off(data_t *data)
+{
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd,
+					   data->display.outputs[i].config.connector,
+					   DRM_MODE_DPMS_OFF);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status
+			   (IGT_RUNTIME_PM_STATUS_SUSPENDED));
+}
+
+static void dpms_on(data_t *data)
+{
+	for (int i = 0; i < data->display.n_outputs; i++) {
+		kmstest_set_connector_dpms(data->drm_fd,
+					   data->display.outputs[i].config.connector,
+					   DRM_MODE_DPMS_ON);
+	}
+
+	if (!data->runtime_suspend_disabled)
+		igt_assert(igt_wait_for_pm_status
+			   (IGT_RUNTIME_PM_STATUS_ACTIVE));
+}
+
+static void test_dc_state_dpms(data_t *data, int dc_flag)
+{
+	uint32_t dc_counter;
+
+	dc_counter = read_dc_counter(data->drm_fd, dc_flag);
+	dpms_off(data);
+	check_dc_counter(data->drm_fd, dc_flag, dc_counter);
+	dpms_on(data);
+
+	/* if runtime PM is disabled for i915 restore it,
+	 * so any other sub-test can use runtime-PM.
+	 */
+	if (data->runtime_suspend_disabled) {
+		igt_restore_runtime_pm();
+		igt_setup_runtime_pm();
+	}
+}
+
 int main(int argc, char *argv[])
 {
 	bool has_runtime_pm;
@@ -209,6 +266,11 @@ int main(int argc, char *argv[])
 		test_dc_state_psr(&data, CHECK_DC6);
 	}
 
+	igt_subtest("dc5-dpms") {
+		setup_dc_dpms(&data);
+		test_dc_state_dpms(&data, CHECK_DC5);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#15 lore raw

PATCH v9 5/5 tests/i915/i915_pm_dc: Added test for DC6 during DPMS

In reply to Anshuman Gupta

From: Jyoti Yadav <[email protected]>

Added new subtest for DC6 entry during DPMS on/off cycle. During DPMS on/off cycle DC6 counter is incremented.

v2: Renamed the subtest name.
v3: Rebased.
v4: Addressed review comment by replacing igt_display_init() to
igt_display_require(), changes got done in patch set 2.
v5: Addressed the review comment by removing redundant read_dc_counter()
suggested by Imre.
Listing actual change in patch set changelog to make review easier.
v6: Rebased due to test name pm_dc changed to i915_pm_dc, aligning to
other PM tests.
v7: Introduced setup_dc_dpms() inorder to disable i915 runtime PM for
the platform supports DC9.

---
 tests/i915/i915_pm_dc.c | 5 +++++
 1 file changed, 5 insertions(+)
tests/i915/i915_pm_dc.c +5 -0
index 338ed70..1a210df 100644
@@ -271,6 +271,11 @@ int main(int argc, char *argv[])
 		test_dc_state_dpms(&data, CHECK_DC5);
 	}
 
+	igt_subtest("dc6-dpms") {
+		setup_dc_dpms(&data);
+		test_dc_state_dpms(&data, CHECK_DC6);
+	}
+
 	igt_fixture {
 		close(data.debugfs_fd);
 		display_fini(&data);
Signature · 6 lines
2.7.4

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#16 lore raw
In reply to Anshuman Gupta

Need to resend this series, as patchwork https://patchwork.freedesktop.org/series/56713/
is not updated with this series. please ignore this one.

Quoted 23 lines · Anshuman Gupta

This patch series adds new tests to validate Display C states.
DC states like DC5 and DC6 are validated during PSR entry/exit and during DPMS on/off cycle.

Sending new revision of patch series after addressing review comments and other relevant changes.

1. Changing the name of test from "pm_dc" to "i915_pm_dc" alinged to other PM tests.
2. Changing the DC5/6 counter check timeout from 1 sec to 3 sec,
as in case of PSR it requires more than 2 second to disable DC
power wells after vblank event.
3. Changed the test name from tests/pm_dc to tests tests/i915/i915_pm_dc in name of individual patch.
4. Addressed the review comment by saving POWER_DIR values in igt_disable_runtime_pm().
5. CI fixures for dc5-dpms failure.
Checking DC5 counter value after DPMS off, broke the dpms_on_off function to dpms_on and dpms_off.

Jyoti Yadav (5):
lib/igt_pm: igt lib helper routines to support DC5/6 tests tests/i915/i915_pm_dc: Added new test to verify Display C States tests/i915/i915_pm_dc: Added test for DC6 during PSR tests/i915/i915_pm_dc: Added test for DC5 during DPMS tests/i915/i915_pm_dc: Added test for DC6 during DPMS

Quoted 9 lines
  lib/igt_pm.c             |  83 ++++++++++++++
  lib/igt_pm.h             |   2 +
  tests/Makefile.sources   |   3 +
  tests/i915/i915_pm_dc.c  | 285 +++++++++++++++++++++++++++++++++++++++++++++++
  tests/i915/i915_pm_rpm.c |  17 +--
  tests/meson.build        |   1 +
  6 files changed, 375 insertions(+), 16 deletions(-)

create mode 100644 tests/i915/i915_pm_dc.c

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev