ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Subsystems (4)
v2 cover ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
From: Thierry Reding <[email protected]>
Hi,
This set of patches move some code from the Tegra186 SoC specific directory to a common location so that it can be more easily shared. Since the differences between Tegra186 and earlier generations are now very small, the builds are unified to avoid duplication of code.
We also add support for accessing the PMC on systems where it can only be accessed from TrustZone.
Finally, all of this is used to implement support for the recently announced NVIDIA Jetson Nano Developer Kit.
These patches, along with patches to enable network booting[0], can also be found in the p3450 branch of the following repository:
https://github.com/thierryreding/u-boot
Thanks,
Thierry
[0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
Thierry Reding (15):
ARM: tegra: Use common header for PMU declarations
ARM: tegra: Guard clock code with a Kconfig symbol
ARM: tegra: Guard GP pad control code with a Kconfig symbol
ARM: tegra: Guard memory controller code with a Kconfig symbol
ARM: tegra: Guard pin controller code with a Kconfig symbol
ARM: tegra: Guard powergate code with a Kconfig symbol
ARM: tegra: Fix save_boot_params() prototype
ARM: tegra: Allow boards to override boot target devices
ARM: tegra: Support TZ-only access to PMC
ARM: tegra: Workaround UDC boot issues only if necessary
ARM: tegra: Restore DRAM bank count
ARM: tegra: Unify Tegra186 builds
ARM: tegra: Implement cboot_save_boot_params() in C
ARM: tegra: Implement cboot_get_ethaddr()
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
arch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++
arch/arm/include/asm/arch-tegra/cboot.h | 45 +++
arch/arm/include/asm/arch-tegra/pmc.h | 20 +-
.../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +-
arch/arm/include/asm/arch-tegra/tegra.h | 6 +
arch/arm/include/asm/arch-tegra114/pmu.h | 12 -
arch/arm/include/asm/arch-tegra124/pmu.h | 13 -
arch/arm/include/asm/arch-tegra210/pmu.h | 13 -
arch/arm/include/asm/arch-tegra30/pmu.h | 12 -
arch/arm/mach-tegra/Kconfig | 31 ++
arch/arm/mach-tegra/Makefile | 16 +-
arch/arm/mach-tegra/board.c | 41 ++-
arch/arm/mach-tegra/board186.c | 32 --
arch/arm/mach-tegra/board2.c | 37 ++-
arch/arm/mach-tegra/cache.c | 2 +
.../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++--
arch/arm/mach-tegra/clock.c | 13 +-
arch/arm/mach-tegra/cmd_enterrcm.c | 6 +-
arch/arm/mach-tegra/cpu.c | 20 +-
arch/arm/mach-tegra/emc.c | 2 +-
arch/arm/mach-tegra/lowlevel_init.S | 39 ---
arch/arm/mach-tegra/pmc.c | 92 ++++++
arch/arm/mach-tegra/powergate.c | 11 +-
arch/arm/mach-tegra/tegra186/Makefile | 4 -
arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 --
arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 -----------
arch/arm/mach-tegra/tegra210/Kconfig | 7 +
board/nvidia/p2771-0000/p2771-0000.c | 10 +-
board/nvidia/p3450-0000/Kconfig | 12 +
board/nvidia/p3450-0000/MAINTAINERS | 6 +
board/nvidia/p3450-0000/Makefile | 8 +
board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++
.../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++
configs/p2771-0000-000_defconfig | 2 +-
configs/p2771-0000-500_defconfig | 2 +-
configs/p3450-0000_defconfig | 54 ++++
include/configs/p3450-0000.h | 44 +++
include/configs/tegra-common-post.h | 2 +
38 files changed, 1230 insertions(+), 392 deletions(-)
create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts
create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h
rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%)
delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h
delete mode 100644 arch/arm/mach-tegra/board186.c
rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%)
delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S
create mode 100644 arch/arm/mach-tegra/pmc.c
delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S
delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c
create mode 100644 board/nvidia/p3450-0000/Kconfig
create mode 100644 board/nvidia/p3450-0000/MAINTAINERS
create mode 100644 board/nvidia/p3450-0000/Makefile
create mode 100644 board/nvidia/p3450-0000/p3450-0000.c
create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h
create mode 100644 configs/p3450-0000_defconfig
create mode 100644 include/configs/p3450-0000.hSignature · 1 line
2.21.0
PATCH v2 1/15 ARM: tegra: Use common header for PMU declarations
From: Thierry Reding <[email protected]>
There's no need to replicate the pmu.h header file for every Tegra SoC generation. Use a single header that is shared across generations.
---
.../include/asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +++---
arch/arm/include/asm/arch-tegra114/pmu.h | 12 ------------
arch/arm/include/asm/arch-tegra124/pmu.h | 13 -------------
arch/arm/include/asm/arch-tegra210/pmu.h | 13 -------------
arch/arm/include/asm/arch-tegra30/pmu.h | 12 ------------
arch/arm/mach-tegra/board2.c | 2 +-
arch/arm/mach-tegra/emc.c | 2 +-
7 files changed, 5 insertions(+), 55 deletions(-)
rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%)
delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h
delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.harch/arm/include/asm/arch-tegra/pmu.h renamed from arch/arm/include/asm/arch-tegra20/pmu.h +3 -3
@@ -4,10 +4,10 @@* NVIDIA Corporation <www.nvidia.com> */ -#ifndef _ARCH_PMU_H_ -#define _ARCH_PMU_H_ +#ifndef _TEGRA_PMU_H_ +#define _TEGRA_PMU_H_/* Set core and CPU voltages to nominal levels */ int pmu_set_nominal (void ); -#endif /* _ARCH_PMU_H_ */ +#endif /* _TEGRA_PMU_H_ */
arch/arm/include/asm/arch-tegra114/pmu.h deleted +0 -12
@@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* -* Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -*/ - -#ifndef _TEGRA114_PMU_H_ -#define _TEGRA114_PMU_H_ - -/* Set core and CPU voltages to nominal levels */ -int pmu_set_nominal (void ); - -#endif /* _TEGRA114_PMU_H_ */
arch/arm/include/asm/arch-tegra124/pmu.h deleted +0 -13
@@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2010-2013 -* NVIDIA Corporation <www.nvidia.com> -*/ - -#ifndef _TEGRA124_PMU_H_ -#define _TEGRA124_PMU_H_ - -/* Set core and CPU voltages to nominal levels */ -int pmu_set_nominal (void ); - -#endif /* _TEGRA124_PMU_H_ */
arch/arm/include/asm/arch-tegra210/pmu.h deleted +0 -13
@@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* -* (C) Copyright 2010-2015 -* NVIDIA Corporation <www.nvidia.com> -*/ - -#ifndef _TEGRA210_PMU_H_ -#define _TEGRA210_PMU_H_ - -/* Set core and CPU voltages to nominal levels */ -int pmu_set_nominal (void ); - -#endif /* _TEGRA210_PMU_H_ */
arch/arm/include/asm/arch-tegra30/pmu.h deleted +0 -12
@@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* -* Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -*/ - -#ifndef _TEGRA30_PMU_H_ -#define _TEGRA30_PMU_H_ - -/* Set core and CPU voltages to nominal levels */ -int pmu_set_nominal (void ); - -#endif /* _TEGRA30_PMU_H_ */
arch/arm/mach-tegra/board2.c +1 -1
@@ -15,6 +15,7 @@#include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h> +#include <asm/arch-tegra/pmu.h> #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/uart.h> #include <asm/arch-tegra/warmboot.h>
@@ -24,7 +25,6 @@#include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> -#include <asm/arch/pmu.h> #include <asm/arch/tegra.h> #ifdef CONFIG_TEGRA_CLOCK_SCALING #include <asm/arch/emc.h>
arch/arm/mach-tegra/emc.c +1 -1
@@ -8,10 +8,10 @@#include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/emc.h> -#include <asm/arch/pmu.h> #include <asm/arch/tegra.h> #include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/pmu.h> #include <asm/arch-tegra/sys_proto.h> DECLARE_GLOBAL_DATA_PTR ;
Signature · 1 line
2.21.0
PATCH v2 2/15 ARM: tegra: Guard clock code with a Kconfig symbol
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Clock code is not relevant on all Tegra SoC generations, so guard it with a Kconfig symbol that can be selected by the generations that need it.
This is in preparation for unifying Tegra186 code with the code used on older generations.
--- arch/arm/mach-tegra/Kconfig | 5 +++++ arch/arm/mach-tegra/Makefile | 2 +- arch/arm/mach-tegra/board.c | 2 ++ arch/arm/mach-tegra/board2.c | 12 ++++++++++-- 4 files changed, 18 insertions(+), 3 deletions(-)
arch/arm/mach-tegra/Kconfig +5 -0
@@ -12,6 +12,9 @@ config SPL_LIBGENERIC_SUPPORT config SPL_SERIAL_SUPPORT default y +config TEGRA_CLKRST + bool + config TEGRA_IVC bool "Tegra IVC protocol" help
@@ -55,6 +58,7 @@ config TEGRA_ARMV7_COMMON select SPL select SPL_BOARD_INIT if SPL select SUPPORT_SPL + select TEGRA_CLKRST select TEGRA_COMMON select TEGRA_GPIO select TEGRA_NO_BPMP
@@ -100,6 +104,7 @@ config TEGRA124 config TEGRA210 bool "Tegra210 family" select TEGRA_ARMV8_COMMON + select TEGRA_CLKRST select TEGRA_GPIO select TEGRA_NO_BPMP
arch/arm/mach-tegra/Makefile +1 -1
@@ -16,7 +16,7 @@ endif obj-y += ap.o obj-y += board.o board2.o obj-y += cache.o -obj-y += clock.o +obj-$(CONFIG_TEGRA_CLKRST) += clock.o obj-y += pinmux-common.o obj-y += powergate.o obj-y += xusb-padctl-dummy.o
arch/arm/mach-tegra/board.c +2 -0
@@ -9,7 +9,9 @@#include <ns16550.h> #include <spl.h> #include <asm/io.h> +#if IS_ENABLED (CONFIG_TEGRA_CLKRST )#include <asm/arch/clock.h> +#endif #include <asm/arch/funcmux.h> #include <asm/arch/mc.h> #include <asm/arch/tegra.h>
arch/arm/mach-tegra/board2.c +10 -2
@@ -22,7 +22,9 @@#include <asm/arch-tegra/gpu.h> #include <asm/arch-tegra/usb.h> #include <asm/arch-tegra/xusb-padctl.h> +#if IS_ENABLED (CONFIG_TEGRA_CLKRST )#include <asm/arch/clock.h> +#endif #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/tegra.h>
@@ -109,8 +111,10 @@ int board_init(void)__maybe_unused int board_id;/* Do clocks and UART first so that printf() works */ +#if IS_ENABLED (CONFIG_TEGRA_CLKRST )clock_init ();clock_verify (); +#endif tegra_gpu_config ();
@@ -181,8 +185,10 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));int board_early_init_f (void ) { +#if IS_ENABLED (CONFIG_TEGRA_CLKRST )if (!clock_early_init_done ())clock_early_init (); +#endif #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT )#define USBCMD_FS2 (1 << 15)
@@ -193,10 +199,12 @@ int board_early_init_f(void)#endif /* Do any special system timer/TSC setup */ -#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE ) +#if IS_ENABLED (CONFIG_TEGRA_CLKRST ) +# if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE ) if (!tegra_cpu_is_non_secure()) -#endif +# endif arch_timer_init (); +#endif pinmux_init ();board_init_uart_f ();
Signature · 1 line
2.21.0
PATCH v2 3/15 ARM: tegra: Guard GP pad control code with a Kconfig symbol
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
The GP pad control code is not relevant on all Tegra SoC generations, so guard it with a Kconfig symbol that can be selected by the generations that need it.
This is in preparation for unifying Tegra186 code with the code used on older generations.
--- arch/arm/mach-tegra/Kconfig | 5 +++++ arch/arm/mach-tegra/Makefile | 2 +- arch/arm/mach-tegra/cache.c | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-tegra/Kconfig +5 -0
@@ -15,6 +15,9 @@ config SPL_SERIAL_SUPPORT config TEGRA_CLKRST bool +config TEGRA_GP_PADCTRL + bool + config TEGRA_IVC bool "Tegra IVC protocol" help
@@ -61,6 +64,7 @@ config TEGRA_ARMV7_COMMON select TEGRA_CLKRST select TEGRA_COMMON select TEGRA_GPIO + select TEGRA_GP_PADCTRL select TEGRA_NO_BPMP config TEGRA_ARMV8_COMMON
@@ -106,6 +110,7 @@ config TEGRA210 select TEGRA_ARMV8_COMMON select TEGRA_CLKRST select TEGRA_GPIO + select TEGRA_GP_PADCTRL select TEGRA_NO_BPMP config TEGRA186
arch/arm/mach-tegra/Makefile +1 -1
@@ -13,7 +13,7 @@ else obj-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o endif -obj-y += ap.o +obj-$(CONFIG_TEGRA_GP_PADCTRL) += ap.o obj-y += board.o board2.o obj-y += cache.o obj-$(CONFIG_TEGRA_CLKRST) += clock.o
arch/arm/mach-tegra/cache.c +2 -0
@@ -8,7 +8,9 @@#include <common.h> #include <asm/io.h> #include <asm/arch-tegra/ap.h> +#if IS_ENABLED (CONFIG_TEGRA_GP_PADCTRL )#include <asm/arch/gp_padctrl.h> +#endif #ifndef CONFIG_ARM64 void config_cache (void )
Signature · 1 line
2.21.0
PATCH v2 4/15 ARM: tegra: Guard memory controller code with a Kconfig symbol
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Memory controller code is not relevant on all Tegra SoC generations, so guard it with a Kconfig symbol that can be selected by the generations that need it.
This is in preparation for unifying Tegra186 code with the code used on older generations.
--- arch/arm/mach-tegra/Kconfig | 5 +++++ arch/arm/mach-tegra/board.c | 7 +++++++ 2 files changed, 12 insertions(+)
arch/arm/mach-tegra/Kconfig +5 -0
@@ -26,6 +26,9 @@ config TEGRA_IVC U-Boot, it is typically used for communication between the main CPU and various auxiliary processors. +config TEGRA_MC + bool + config TEGRA_COMMON bool "Tegra common options" select BINMAN
@@ -65,6 +68,7 @@ config TEGRA_ARMV7_COMMON select TEGRA_COMMON select TEGRA_GPIO select TEGRA_GP_PADCTRL + select TEGRA_MC select TEGRA_NO_BPMP config TEGRA_ARMV8_COMMON
@@ -111,6 +115,7 @@ config TEGRA210 select TEGRA_CLKRST select TEGRA_GPIO select TEGRA_GP_PADCTRL + select TEGRA_MC select TEGRA_NO_BPMP config TEGRA186
arch/arm/mach-tegra/board.c +7 -0
@@ -13,7 +13,9 @@#include <asm/arch/clock.h> #endif #include <asm/arch/funcmux.h> +#if IS_ENABLED (CONFIG_TEGRA_MC )#include <asm/arch/mc.h> +#endif #include <asm/arch/tegra.h> #include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h>
@@ -68,6 +70,7 @@ bool tegra_cpu_is_non_secure(void) }#endif +#if IS_ENABLED (CONFIG_TEGRA_MC )/* Read the RAM size directly from the memory controller */ static phys_size_t query_sdram_size (void ) {
@@ -117,11 +120,15 @@ static phys_size_t query_sdram_size(void) return size_bytes; } +#endif int dram_init (void ) { +#if IS_ENABLED (CONFIG_TEGRA_MC )/* We do not initialise DRAM here. We just query the size */ gd->ram_size =query_sdram_size (); +#endif +return 0 ; }
Signature · 1 line
2.21.0
PATCH v2 5/15 ARM: tegra: Guard pin controller code with a Kconfig symbol
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Pin controller code is not relevant on all Tegra SoC generations, so guard it with a Kconfig symbol that can be selected by the generations that need it.
This is in preparation for unifying Tegra186 code with the code used on older generations.
--- arch/arm/mach-tegra/Kconfig | 5 +++++ arch/arm/mach-tegra/Makefile | 2 +- arch/arm/mach-tegra/board.c | 6 ++++++ arch/arm/mach-tegra/board2.c | 2 ++ 4 files changed, 14 insertions(+), 1 deletion(-)
arch/arm/mach-tegra/Kconfig +5 -0
@@ -29,6 +29,9 @@ config TEGRA_IVC config TEGRA_MC bool +config TEGRA_PINCTRL + bool + config TEGRA_COMMON bool "Tegra common options" select BINMAN
@@ -70,6 +73,7 @@ config TEGRA_ARMV7_COMMON select TEGRA_GP_PADCTRL select TEGRA_MC select TEGRA_NO_BPMP + select TEGRA_PINCTRL config TEGRA_ARMV8_COMMON bool "Tegra 64-bit common options"
@@ -117,6 +121,7 @@ config TEGRA210 select TEGRA_GP_PADCTRL select TEGRA_MC select TEGRA_NO_BPMP + select TEGRA_PINCTRL config TEGRA186 bool "Tegra186 family"
arch/arm/mach-tegra/Makefile +1 -1
@@ -17,7 +17,7 @@ obj-$(CONFIG_TEGRA_GP_PADCTRL) += ap.o obj-y += board.o board2.o obj-y += cache.o obj-$(CONFIG_TEGRA_CLKRST) += clock.o -obj-y += pinmux-common.o +obj-$(CONFIG_TEGRA_PINCTRL) += pinmux-common.o obj-y += powergate.o obj-y += xusb-padctl-dummy.o endif
arch/arm/mach-tegra/board.c +6 -0
@@ -12,7 +12,9 @@#if IS_ENABLED (CONFIG_TEGRA_CLKRST )#include <asm/arch/clock.h> #endif +#if IS_ENABLED (CONFIG_TEGRA_PINCTRL )#include <asm/arch/funcmux.h> +#endif #if IS_ENABLED (CONFIG_TEGRA_MC )#include <asm/arch/mc.h> #endif
@@ -132,6 +134,7 @@ int dram_init(void)return 0 ; } +#if IS_ENABLED (CONFIG_TEGRA_PINCTRL ) static int uart_configs[] = {#if defined(CONFIG_TEGRA20 )#if defined(CONFIG_TEGRA_UARTA_UAA_UAB )
@@ -199,9 +202,11 @@ static void setup_uarts(int uart_ids) } } } +#endif void board_init_uart_f (void ) { +#if IS_ENABLED (CONFIG_TEGRA_PINCTRL )int uart_ids =0 ;/* bit mask of which UART ids to enable */ #ifdef CONFIG_TEGRA_ENABLE_UARTA
@@ -220,6 +225,7 @@ void board_init_uart_f(void) uart_ids |=UARTE ;#endif setup_uarts (uart_ids); +#endif }#if !CONFIG_IS_ENABLED (OF_CONTROL )
arch/arm/mach-tegra/board2.c +2 -0
@@ -25,8 +25,10 @@#if IS_ENABLED (CONFIG_TEGRA_CLKRST )#include <asm/arch/clock.h> #endif +#if IS_ENABLED (CONFIG_TEGRA_PINCTRL )#include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> +#endif #include <asm/arch/tegra.h> #ifdef CONFIG_TEGRA_CLOCK_SCALING #include <asm/arch/emc.h>
Signature · 1 line
2.21.0
PATCH v2 6/15 ARM: tegra: Guard powergate code with a Kconfig symbol
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Powergate code is not relevant on all Tegra SoC generations, so guard it with a Kconfig symbol that can be selected by the generations that need it.
This is in preparation for unifying Tegra186 code with the code used on older generations.
--- arch/arm/mach-tegra/Kconfig | 5 +++++ arch/arm/mach-tegra/Makefile | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-)
arch/arm/mach-tegra/Kconfig +5 -0
@@ -32,6 +32,9 @@ config TEGRA_MC config TEGRA_PINCTRL bool +config TEGRA_PMC + bool + config TEGRA_COMMON bool "Tegra common options" select BINMAN
@@ -74,6 +77,7 @@ config TEGRA_ARMV7_COMMON select TEGRA_MC select TEGRA_NO_BPMP select TEGRA_PINCTRL + select TEGRA_PMC config TEGRA_ARMV8_COMMON bool "Tegra 64-bit common options"
@@ -122,6 +126,7 @@ config TEGRA210 select TEGRA_MC select TEGRA_NO_BPMP select TEGRA_PINCTRL + select TEGRA_PMC config TEGRA186 bool "Tegra186 family"
arch/arm/mach-tegra/Makefile +1 -1
@@ -18,7 +18,7 @@ obj-y += board.o board2.o obj-y += cache.o obj-$(CONFIG_TEGRA_CLKRST) += clock.o obj-$(CONFIG_TEGRA_PINCTRL) += pinmux-common.o -obj-y += powergate.o +obj-$(CONFIG_TEGRA_PMC) += powergate.o obj-y += xusb-padctl-dummy.o endif
Signature · 1 line
2.21.0
PATCH v2 7/15 ARM: tegra: Fix save_boot_params() prototype
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
The save_boot_params() function takes as its first four arguments the first four registers. On 32-bit ARM these are r0, r1, r2 and r3, all of which are 32 bits wide. However, on 64-bit ARM thene registers are x0, x1, x2 and x3, all of which are 64 bits wide. In order to allow reusing the save_boot_params() implementation on 64-bit ARM, change it to take unsigned long parameters rather than the fixed size 32-bit integers. This ensures that the correct values are passed.
--- arch/arm/mach-tegra/board.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-tegra/board.c +2 -1
@@ -42,7 +42,8 @@ enum { static bool from_spl __attribute__ ((section(".data")));#ifndef CONFIG_SPL_BUILD -void save_boot_params (u32 r0,u32 r1,u32 r2,u32 r3) +void save_boot_params (unsigned long r0,unsigned long r1,unsigned long r2, +unsigned long r3) { from_spl = r0 !=UBOOT_NOT_LOADED_FROM_SPL ;save_boot_params_ret ();
Signature · 1 line
2.21.0
PATCH v2 8/15 ARM: tegra: Allow boards to override boot target devices
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Boards may not support all the boot target devices in the default list for Tegra devices. Allow a board to override the list and default to the standard list only if the board hasn't specified one itself.
--- include/configs/tegra-common-post.h | 2 ++ 1 file changed, 2 insertions(+)
include/configs/tegra-common-post.h +2 -0
@@ -21,12 +21,14 @@#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20)/* 1 MiB */ #ifndef CONFIG_SPL_BUILD +#ifndef BOOT_TARGET_DEVICES #define BOOT_TARGET_DEVICES (func) \ func(MMC, mmc, 1) \ func(MMC, mmc, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) +#endif #include <config_distro_bootcmd.h> #else #define BOOTENV
Signature · 1 line
2.21.0
PATCH v2 9/15 ARM: tegra: Support TZ-only access to PMC
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Some devices may restrict access to the PMC to TrustZone software only. Non-TZ software can detect this and use SMC calls to the firmware that runs in the TrustZone to perform accesses to PMC registers.
Note that this also fixes reset_cpu() and the enterrcm command on Tegra186 where they were previously trying to access the PMC at a wrong physical address.
Based on work by Kalyani Chidambaram <[email protected]> and Tom Warren <[email protected]>.
--- arch/arm/include/asm/arch-tegra/pmc.h | 20 +++++- arch/arm/include/asm/arch-tegra/tegra.h | 6 ++ arch/arm/mach-tegra/Kconfig | 5 ++ arch/arm/mach-tegra/Makefile | 4 +- arch/arm/mach-tegra/clock.c | 13 ++-- arch/arm/mach-tegra/cmd_enterrcm.c | 6 +- arch/arm/mach-tegra/cpu.c | 20 +++--- arch/arm/mach-tegra/lowlevel_init.S | 39 ----------- arch/arm/mach-tegra/pmc.c | 92 +++++++++++++++++++++++++ arch/arm/mach-tegra/powergate.c | 11 +-- 10 files changed, 151 insertions(+), 65 deletions(-) delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S create mode 100644 arch/arm/mach-tegra/pmc.c
arch/arm/include/asm/arch-tegra/pmc.h +19 -1
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0+ */ /* -* (C) Copyright 2010-2015 +* (C) Copyright 2010-2019 * NVIDIA Corporation <www.nvidia.com> */
@@ -388,4 +388,22 @@ struct pmc_ctlr {/* APBDEV_PMC_CNTRL2_0 0x440 */ #define HOLD_CKE_LOW_EN (1 << 12) +/* PMC read/write functions */ +u32 tegra_pmc_readl (unsigned long offset); +void tegra_pmc_writel (u32 value,unsigned long offset); + +#define PMC_CNTRL 0x0 +#define PMC_CNTRL_MAIN_RST BIT(4) + +#if IS_ENABLED (CONFIG_TEGRA186 ) +# define PMC_SCRATCH0 0x32000 +#else +# define PMC_SCRATCH0 0x00050 +#endif + +/* for secure PMC */ +#define TEGRA_SMC_PMC 0xc2fffe00 +#define TEGRA_SMC_PMC_READ 0xaa +#define TEGRA_SMC_PMC_WRITE 0xbb +#endif /* PMC_H */
arch/arm/include/asm/arch-tegra/tegra.h +6 -0
@@ -30,7 +30,13 @@#define NV_PA_SLINK5_BASE (NV_PA_APB_MISC_BASE + 0xDC00)#define NV_PA_SLINK6_BASE (NV_PA_APB_MISC_BASE + 0xDE00)#define TEGRA_DVC_BASE (NV_PA_APB_MISC_BASE + 0xD000) +#if defined(CONFIG_TEGRA20 ) || defined(CONFIG_TEGRA30 ) || \ + defined(CONFIG_TEGRA114 ) || defined(CONFIG_TEGRA124 ) || \ + defined(CONFIG_TEGRA132 ) || defined(CONFIG_TEGRA210 )#define NV_PA_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400) +#else +#define NV_PA_PMC_BASE 0xc360000 +#endif #define NV_PA_EMC_BASE (NV_PA_APB_MISC_BASE + 0xF400)#define NV_PA_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800) #if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \
arch/arm/mach-tegra/Kconfig +5 -0
@@ -35,6 +35,10 @@ config TEGRA_PINCTRL config TEGRA_PMC bool +config TEGRA_PMC_SECURE + bool + depends on TEGRA_PMC + config TEGRA_COMMON bool "Tegra common options" select BINMAN
@@ -127,6 +131,7 @@ config TEGRA210 select TEGRA_NO_BPMP select TEGRA_PINCTRL select TEGRA_PMC + select TEGRA_PMC_SECURE config TEGRA186 bool "Tegra186 family"
arch/arm/mach-tegra/Makefile +2 -2
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# (C) Copyright 2010-2015 Nvidia Corporation. +# (C) Copyright 2010-2019 Nvidia Corporation. # # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, [email protected].
@@ -27,11 +27,11 @@ obj-y += dt-setup.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o obj-$(CONFIG_TEGRA_GPU) += gpu.o obj-$(CONFIG_TEGRA_IVC) += ivc.o -obj-y += lowlevel_init.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o endif obj-$(CONFIG_DISPLAY_CPUINFO) += sys_info.o +obj-y += pmc.o obj-$(CONFIG_TEGRA20) += tegra20/ obj-$(CONFIG_TEGRA30) += tegra30/
arch/arm/mach-tegra/clock.c +9 -4
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. +* Copyright (c) 2010-2019, NVIDIA CORPORATION. All rights reserved. */ /* Tegra SoC common clock control functions */
@@ -814,11 +814,16 @@ void tegra30_set_up_pllp(void)int clock_external_output (int clk_id) { -struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ; +u32 val;if (clk_id >=1 && clk_id <=3 ) { -setbits_le32 (&pmc->pmc_clk_out_cntrl, -1 << (2 + (clk_id -1 ) *8 )); + val =tegra_pmc_readl (offsetof(struct pmc_ctlr , + pmc_clk_out_cntrl)); + val |=1 << (2 + (clk_id -1 ) *8 ); +tegra_pmc_writel (val, + offsetof(struct pmc_ctlr , + pmc_clk_out_cntrl)); + }else {printf ("%s: Unknown output clock id %d\n" , __func__, clk_id);return -EINVAL ;
arch/arm/mach-tegra/cmd_enterrcm.c +2 -4
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0+ /* -* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. +* Copyright (c) 2012-2019, NVIDIA CORPORATION. All rights reserved. * * Derived from code (arch/arm/lib/reset.c) that is: *
@@ -31,12 +31,10 @@static int do_enterrcm (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) { -struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ; -puts ("Entering RCM...\n" );udelay (50000 ); - pmc->pmc_scratch0 =2 ; +tegra_pmc_writel (2 ,PMC_SCRATCH0 );disable_interrupts ();reset_cpu (0 );
arch/arm/mach-tegra/cpu.c +10 -10
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (c) 2010-2015, NVIDIA CORPORATION. All rights reserved. +* Copyright (c) 2010-2019, NVIDIA CORPORATION. All rights reserved. */ #include <common.h>
@@ -299,21 +299,19 @@ void enable_cpu_clock(int enable)static int is_cpu_powered (void ) { -struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ; - -return (readl (&pmc->pmc_pwrgate_status) &CPU_PWRED ) ?1 :0 ; +return (tegra_pmc_readl (offsetof(struct pmc_ctlr , + pmc_pwrgate_status)) &CPU_PWRED ) ?1 :0 ; }static void remove_cpu_io_clamps (void ) { -struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ;u32 reg;debug ("%s entry\n" , __func__);/* Remove the clamps on the CPU I/O signals */ - reg =readl (&pmc->pmc_remove_clamping); + reg =tegra_pmc_readl (offsetof(struct pmc_ctlr , pmc_remove_clamping)); reg |=CPU_CLMP ; -writel (reg, &pmc->pmc_remove_clamping); +tegra_pmc_writel (reg, offsetof(struct pmc_ctlr , pmc_remove_clamping));/* Give I/O signals time to stabilize */ udelay (IO_STABILIZATION_DELAY );
@@ -321,17 +319,19 @@ static void remove_cpu_io_clamps(void)void powerup_cpu (void ) { -struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE ;u32 reg;int timeout =IO_STABILIZATION_DELAY ;debug ("%s entry\n" , __func__);if (!is_cpu_powered ()) {/* Toggle the CPU power state (OFF -> ON) */ - reg =readl (&pmc->pmc_pwrgate_toggle); + reg =tegra_pmc_readl (offsetof(struct pmc_ctlr , + pmc_pwrgate_toggle)); reg &=PARTID_CP ; reg |=START_CP ; -writel (reg, &pmc->pmc_pwrgate_toggle); +tegra_pmc_writel (reg, + offsetof(struct pmc_ctlr , + pmc_pwrgate_toggle));/* Wait for the power to come up */ while (!is_cpu_powered ()) {
arch/arm/mach-tegra/lowlevel_init.S deleted +0 -39
@@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * SoC-specific setup info - * - * (C) Copyright 2010,2011 - * NVIDIA Corporation <www.nvidia.com> - */ - -#include <config.h> -#include <linux/linkage.h> - -#ifdef CONFIG_ARM64 - .align 5 -ENTRY(reset_cpu) - /* get address for global reset register */ - ldr x1, =PRM_RSTCTRL - ldr w3, [x1] - /* force reset */ - orr w3, w3, #0x10 - str w3, [x1] - mov w0, w0 -1: - b 1b -ENDPROC(reset_cpu) -#else - .align 5 -ENTRY(reset_cpu) - ldr r1, rstctl @ get addr for global reset - @ reg - ldr r3, [r1] - orr r3, r3, #0x10 - str r3, [r1] @ force reset - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PRM_RSTCTRL -ENDPROC(reset_cpu) -#endif
arch/arm/mach-tegra/pmc.c new file +92 -0
92 lines not on this page · raw message
arch/arm/mach-tegra/powergate.c +6 -5
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* -* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. +* Copyright (c) 2014-2019, NVIDIA CORPORATION. All rights reserved. */ #include <common.h>
@@ -11,6 +11,7 @@#include <asm/arch/powergate.h> #include <asm/arch/tegra.h> +#include <asm/arch-tegra/pmc.h> #define PWRGATE_TOGGLE 0x30#define PWRGATE_TOGGLE_START (1 << 8)
@@ -24,18 +25,18 @@ static int tegra_powergate_set(enum tegra_powergate id, bool state)u32 value, mask = state ? (1 << id) :0 , old_mask;unsigned long start, timeout =25 ; - value =readl (NV_PA_PMC_BASE +PWRGATE_STATUS ); + value =tegra_pmc_readl (PWRGATE_STATUS ); old_mask = value & (1 << id);if (mask == old_mask)return 0 ; -writel (PWRGATE_TOGGLE_START | id,NV_PA_PMC_BASE +PWRGATE_TOGGLE ); +tegra_pmc_writel (PWRGATE_TOGGLE_START | id,PWRGATE_TOGGLE ); start =get_timer (0 );while (get_timer (start) < timeout) { - value =readl (NV_PA_PMC_BASE +PWRGATE_STATUS ); + value =tegra_pmc_readl (PWRGATE_STATUS );if ((value & (1 << id)) == mask)return 0 ; }
@@ -69,7 +70,7 @@ static int tegra_powergate_remove_clamping(enum tegra_powergate id)else value =1 << id; -writel (value,NV_PA_PMC_BASE +REMOVE_CLAMPING ); +tegra_pmc_writel (value,REMOVE_CLAMPING );return 0 ; }
Signature · 1 line
2.21.0
PATCH v2 10/15 ARM: tegra: Workaround UDC boot issues only if necessary
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Resetting the USB device controller on boot is only necessary if the SoC actually has a UDC controller and U-Boot enables support for it. All the Tegra boards support UDC via the ChipIdea UDC driver, so make the UDC on boot workaround depend on the ChipIdea UDC driver.
This prevents a crash on Tegra186 which does not have the ChipIdea UDC.
--- arch/arm/mach-tegra/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-tegra/Kconfig +1 -0
@@ -148,6 +148,7 @@ endchoice config TEGRA_DISCONNECT_UDC_ON_BOOT bool "Disconnect USB device mode controller on boot" + depends on CI_UDC default y help When loading U-Boot into RAM over USB protocols using tools such as
Signature · 1 line
2.21.0
PATCH v2 11/15 ARM: tegra: Restore DRAM bank count
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Commit 86cf1c82850f ("configs: Migrate CONFIG_NR_DRAM_BANKS") reduced the number of DRAM banks supported by U-Boot from 1026 to 8 on P2771-000 boards.
However, as explained in commit a9819b9e33bd ("ARM: tegra: p2771-000:
increase max DRAM bank count"), the platform can have a large number of unusable chunks of memory (up to 1024), so a total of 1026 DRAM banks are needed to describe the worst-case situation.
In practice the number of DRAM banks needed will typically be much lower, but we should be prepared to properly deal with the worst case.
--- configs/p2771-0000-000_defconfig | 2 +- configs/p2771-0000-500_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
configs/p2771-0000-000_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_TEGRA186=y -CONFIG_NR_DRAM_BANKS=8 +CONFIG_NR_DRAM_BANKS=1026 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y
configs/p2771-0000-500_defconfig +1 -1
@@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TEGRA=y CONFIG_SYS_TEXT_BASE=0x80080000 CONFIG_TEGRA186=y -CONFIG_NR_DRAM_BANKS=8 +CONFIG_NR_DRAM_BANKS=1026 CONFIG_OF_SYSTEM_SETUP=y CONFIG_CONSOLE_MUX=y CONFIG_SYS_STDIO_DEREGISTER=y
Signature · 1 line
2.21.0
PATCH v2 12/15 ARM: tegra: Unify Tegra186 builds
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
Tegra186 build are currently dealt with in very special ways, which is because Tegra186 is fundamentally different in many respects. It is no longer necessary to do many of the low-level programming because early boot firmware will already have taken care of it.
Unfortunately, separating Tegra186 builds from the rest in this way makes it difficult to share code with prior generations of Tegra. With all of the low-level programming code behind Kconfig guards, the build for Tegra186 can again be unified.
As a side-effect, and partial reason for this change, other Tegra SoC generations can now make use of the code that deals with taking over a boot from earlier bootloaders. This used to be nvtboot, but has been replaced by cboot nowadays. Rename the files and functions related to this to avoid confusion. The implemented protocols are unchanged.
---
arch/arm/include/asm/arch-tegra/cboot.h | 39 ++++
arch/arm/mach-tegra/Makefile | 4 +-
arch/arm/mach-tegra/board.c | 23 ++
arch/arm/mach-tegra/board186.c | 32 ---
arch/arm/mach-tegra/board2.c | 21 ++
.../{tegra186/nvtboot_board.c => cboot.c} | 202 ++++++++++++++++--
.../{tegra186/nvtboot_ll.S => cboot_ll.S} | 12 +-
arch/arm/mach-tegra/tegra186/Makefile | 4 -
arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 ---------------
board/nvidia/p2771-0000/p2771-0000.c | 10 +-
10 files changed, 279 insertions(+), 240 deletions(-)
create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h
delete mode 100644 arch/arm/mach-tegra/board186.c
rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (55%)
rename arch/arm/mach-tegra/{tegra186/nvtboot_ll.S => cboot_ll.S} (57%)
delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.carch/arm/include/asm/arch-tegra/cboot.h new file +39 -0
@@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (c) 2019 NVIDIA Corporation. All rights reserved. +*/ + +#ifndef _TEGRA_CBOOT_H_ +#define _TEGRA_CBOOT_H_ + +#ifdef CONFIG_ARM64 +extern unsigned long cboot_boot_x0; + +void cboot_save_boot_params (unsigned long x0,unsigned long x1, +unsigned long x2,unsigned long x3); +int cboot_dram_init (void ); +int cboot_dram_init_banksize (void ); +ulong cboot_get_usable_ram_top (ulong total_size); +#else +static inline void cboot_save_boot_params (unsigned long x0,unsigned long x1, +unsigned long x2,unsigned long x3) +{ +} + +static inline int cboot_dram_init (void ) +{ +return -ENOSYS ; +} + +static inline int cboot_dram_init_banksize (void ) +{ +return -ENOSYS ; +} + +static inline ulong cboot_get_usable_ram_top (ulong total_size) +{ +return 0 ; +} +#endif + +#endif
arch/arm/mach-tegra/Makefile +1 -3
@@ -5,7 +5,6 @@ # (C) Copyright 2000-2008 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. -ifndef CONFIG_TEGRA186 ifdef CONFIG_SPL_BUILD obj-y += spl.o obj-y += cpu.o
@@ -20,9 +19,8 @@ obj-$(CONFIG_TEGRA_CLKRST) += clock.o obj-$(CONFIG_TEGRA_PINCTRL) += pinmux-common.o obj-$(CONFIG_TEGRA_PMC) += powergate.o obj-y += xusb-padctl-dummy.o -endif -obj-$(CONFIG_ARM64) += arm64-mmu.o +obj-$(CONFIG_ARM64) += arm64-mmu.o cboot_ll.o cboot.o obj-y += dt-setup.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o obj-$(CONFIG_TEGRA_GPU) += gpu.o
arch/arm/mach-tegra/board.c +23 -0
@@ -21,6 +21,7 @@#include <asm/arch/tegra.h> #include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h> +#include <asm/arch-tegra/cboot.h> #include <asm/arch-tegra/pmc.h> #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/warmboot.h>
@@ -46,6 +47,21 @@ void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, unsigned long r3) { from_spl = r0 !=UBOOT_NOT_LOADED_FROM_SPL ; + +/* +* The logic for this is somewhat indirect. The purpose of the marker +* (UBOOT_NOT_LOADED_FROM_SPL) is in fact used to determine if U-Boot +* was loaded from a read-only instance of itself, which is something +* that can happen in secure boot setups. So basically the presence +* of the marker is an indication that U-Boot was loaded by one such +* special variant of U-Boot. Conversely, the absence of the marker +* indicates that this instance of U-Boot was loaded by something +* other than a special U-Boot. This could be SPL, but it could just +* as well be one of any number of other first stage bootloaders. +*/ +if (from_spl) +cboot_save_boot_params (r0, r1, r2, r3); +save_boot_params_ret (); }#endif
@@ -127,6 +143,13 @@ static phys_size_t query_sdram_size(void)int dram_init (void ) { +int err; + +/* try to initialize DRAM from cboot DTB first */ + err =cboot_dram_init (); +if (err ==0 ) +return 0 ; +#if IS_ENABLED (CONFIG_TEGRA_MC )/* We do not initialise DRAM here. We just query the size */ gd->ram_size =query_sdram_size ();
arch/arm/mach-tegra/board186.c deleted +0 -32
@@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* -* Copyright (c) 2016, NVIDIA CORPORATION. -*/ - -#include <common.h> -#include <asm/arch/tegra.h> - -int board_early_init_f (void ) -{ -return 0 ; -} - -__weak int tegra_board_init (void ) -{ -return 0 ; -} - -int board_init (void ) -{ -return tegra_board_init (); -} - -__weak int tegra_soc_board_init_late (void ) -{ -return 0 ; -} - -int board_late_init (void ) -{ -return tegra_soc_board_init_late (); -}
arch/arm/mach-tegra/board2.c +21 -0
@@ -13,6 +13,7 @@#include <asm/io.h> #include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h> +#include <asm/arch-tegra/cboot.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h> #include <asm/arch-tegra/pmu.h>
@@ -51,6 +52,7 @@ __weak void pin_mux_mmc(void) {}__weak void gpio_early_init_uart (void ) {}__weak void pin_mux_display (void ) {}__weak void start_cpu_fan (void ) {} +__weak void cboot_late_init (void ) {}#if defined(CONFIG_TEGRA_NAND )__weak void pin_mux_nand (void )
@@ -243,6 +245,7 @@ int board_late_init(void) }#endif start_cpu_fan (); +cboot_late_init ();return 0 ; }
@@ -337,6 +340,15 @@ static ulong usable_ram_size_below_4g(void)*/ int dram_init_banksize (void ) { +int err; + +/* try to compute DRAM bank size based on cboot DTB first */ + err =cboot_dram_init_banksize (); +if (err ==0 ) +return err; + +/* fall back to default DRAM bank size computation */ + gd->bd->bi_dram[0 ].start =CONFIG_SYS_SDRAM_BASE ; gd->bd->bi_dram[0 ].size =usable_ram_size_below_4g ();
@@ -370,5 +382,14 @@ int dram_init_banksize(void)*/ ulong board_get_usable_ram_top (ulong total_size) { +ulong ram_top; + +/* try to get top of usable RAM based on cboot DTB first */ + ram_top =cboot_get_usable_ram_top (total_size); +if (ram_top >0 ) +return ram_top; + +/* fall back to default usable RAM computation */ +return CONFIG_SYS_SDRAM_BASE +usable_ram_size_below_4g (); }
arch/arm/mach-tegra/cboot.c renamed from arch/arm/mach-tegra/tegra186/nvtboot_board.c +184 -18
275 lines not on this page · raw message
arch/arm/mach-tegra/cboot_ll.S renamed from arch/arm/mach-tegra/tegra186/nvtboot_ll.S +6 -6
@@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Save nvtboot-related boot-time CPU state + * Save cboot-related boot-time CPU state * * (C) Copyright 2015-2016 NVIDIA Corporation <www.nvidia.com> */
@@ -9,12 +9,12 @@ #include <linux/linkage.h> .align 8 -.globl nvtboot_boot_x0 -nvtboot_boot_x0: +.globl cboot_boot_x0 +cboot_boot_x0: .dword 0 -ENTRY(save_boot_params) - adr x8, nvtboot_boot_x0 +ENTRY(cboot_save_boot_params) + adr x8, cboot_boot_x0 str x0, [x8] b save_boot_params_ret -ENDPROC(save_boot_params) +ENDPROC(cboot_save_boot_params)
arch/arm/mach-tegra/tegra186/Makefile +0 -4
@@ -2,8 +2,4 @@ # # SPDX-License-Identifier: GPL-2.0 -obj-y += ../board186.o obj-y += cache.o -obj-y += nvtboot_board.o -obj-y += nvtboot_ll.o -obj-y += nvtboot_mem.o
arch/arm/mach-tegra/tegra186/nvtboot_mem.c deleted +0 -172
172 lines not on this page · raw message
board/nvidia/p2771-0000/p2771-0000.c +5 -5
@@ -7,7 +7,7 @@#include <i2c.h> #include "../p2571/max77620_init.h" -int tegra_board_init (void ) +void pin_mux_mmc (void ) {struct udevice *dev;uchar val;
@@ -18,19 +18,18 @@ int tegra_board_init(void) ret =i2c_get_chip_for_busnum (0 ,MAX77620_I2C_ADDR_7BIT ,1 , &dev);if (ret) {printf ("%s: Cannot find MAX77620 I2C chip\n" , __func__); -return ret; +return ; }/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ val =0xF2 ; ret =dm_i2c_write (dev,MAX77620_CNFG1_L3_REG , &val,1 );if (ret) {printf ("i2c_write 0 0x3c 0x27 failed: %d\n" , ret); -return ret; +return ; } - -return 0 ; } +#ifdef CONFIG_PCI_TEGRA int tegra_pcie_board_init (void ) {struct udevice *dev;
@@ -52,3 +51,4 @@ int tegra_pcie_board_init(void) return 0; } +#endif
Signature · 1 line
2.21.0
PATCH v2 13/15 ARM: tegra: Implement cboot_save_boot_params() in C
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
This is easier to deal with and works just as well for this simple function.
--- arch/arm/mach-tegra/Makefile | 2 +- arch/arm/mach-tegra/cboot.c | 12 ++++++++++++ arch/arm/mach-tegra/cboot_ll.S | 20 -------------------- 3 files changed, 13 insertions(+), 21 deletions(-) delete mode 100644 arch/arm/mach-tegra/cboot_ll.S
arch/arm/mach-tegra/Makefile +1 -1
@@ -20,7 +20,7 @@ obj-$(CONFIG_TEGRA_PINCTRL) += pinmux-common.o obj-$(CONFIG_TEGRA_PMC) += powergate.o obj-y += xusb-padctl-dummy.o -obj-$(CONFIG_ARM64) += arm64-mmu.o cboot_ll.o cboot.o +obj-$(CONFIG_ARM64) += arm64-mmu.o cboot.o obj-y += dt-setup.o obj-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o obj-$(CONFIG_TEGRA_GPU) += gpu.o
arch/arm/mach-tegra/cboot.c +12 -0
@@ -52,6 +52,18 @@ static u64 ram_top __attribute__((section(".data")));/* The base address of the region of RAM that ends at ram_top */ static u64 region_base __attribute__((section(".data"))); +/* +* Explicitly put this in the .data section because it is written before the +* .bss section is zeroed out but it needs to persist. +*/ +unsigned long cboot_boot_x0 __attribute__((section(".data"))); + +void cboot_save_boot_params (unsigned long x0,unsigned long x1, +unsigned long x2,unsigned long x3) +{ + cboot_boot_x0 = x0; +} +int cboot_dram_init (void ) {unsigned int na, ns;
arch/arm/mach-tegra/cboot_ll.S deleted +0 -20
@@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Save cboot-related boot-time CPU state - * - * (C) Copyright 2015-2016 NVIDIA Corporation <www.nvidia.com> - */ - -#include <config.h> -#include <linux/linkage.h> - -.align 8 -.globl cboot_boot_x0 -cboot_boot_x0: - .dword 0 - -ENTRY(cboot_save_boot_params) - adr x8, cboot_boot_x0 - str x0, [x8] - b save_boot_params_ret -ENDPROC(cboot_save_boot_params)
Signature · 1 line
2.21.0
PATCH v2 14/15 ARM: tegra: Implement cboot_get_ethaddr()
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
This function will attempt to look up an ethernet address in the DTB that was passed in from cboot. It does so by first trying to locate the primary ethernet device for the board (identified by the "ethernet" alias) and if found, reads the "local-mac-address" property. If the "ethernet" alias does not exist, or if it points to a device tree node that doesn't exist, or if the device tree node that it points to does not have a "local-mac-address" property or if the value is invalid, it will fall back to the legacy mechanism of looking for the MAC address stored in the "nvidia,ethernet-mac" property of the "/chosen" node.
---
Changes in v2:
- make dummy static inline to avoid duplicate definitions
--- arch/arm/include/asm/arch-tegra/cboot.h | 6 ++ arch/arm/mach-tegra/cboot.c | 78 ++++++++++++++++++++----- 2 files changed, 69 insertions(+), 15 deletions(-)
arch/arm/include/asm/arch-tegra/cboot.h +6 -0
@@ -14,6 +14,7 @@ void cboot_save_boot_params(unsigned long x0, unsigned long x1,int cboot_dram_init (void );int cboot_dram_init_banksize (void );ulong cboot_get_usable_ram_top (ulong total_size); +int cboot_get_ethaddr (const void *fdt,uint8_t mac[ETH_ALEN ]);#else static inline void cboot_save_boot_params (unsigned long x0,unsigned long x1,unsigned long x2,unsigned long x3)
@@ -34,6 +35,11 @@ static inline ulong cboot_get_usable_ram_top(ulong total_size) {return 0 ; } + +static inline int cboot_get_ethaddr (const void *fdt,uint8_t mac[ETH_ALEN ]) +{ +return -ENOSYS ; +}#endif #endif
arch/arm/mach-tegra/cboot.c +63 -15
115 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH v2 15/15 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
In reply to Thierry RedingFrom: Thierry Reding <[email protected]>
The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for storage.
HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity.
A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano.
--- arch/arm/dts/tegra210-p3450-0000.dts | 130 +++++++++ arch/arm/mach-tegra/tegra210/Kconfig | 7 + board/nvidia/p3450-0000/Kconfig | 12 + board/nvidia/p3450-0000/MAINTAINERS | 6 + board/nvidia/p3450-0000/Makefile | 8 + board/nvidia/p3450-0000/p3450-0000.c | 143 ++++++++++ .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++++ configs/p3450-0000_defconfig | 54 ++++ include/configs/p3450-0000.h | 44 +++ 9 files changed, 661 insertions(+) create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts create mode 100644 board/nvidia/p3450-0000/Kconfig create mode 100644 board/nvidia/p3450-0000/MAINTAINERS create mode 100644 board/nvidia/p3450-0000/Makefile create mode 100644 board/nvidia/p3450-0000/p3450-0000.c create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h create mode 100644 configs/p3450-0000_defconfig create mode 100644 include/configs/p3450-0000.h
arch/arm/dts/tegra210-p3450-0000.dts new file +130 -0
@@ -0,0 +1,130 @@ +/dts-v1/; + +#include "tegra210.dtsi" + +/ { + model = "NVIDIA Jetson Nano Development Kit"; + compatible = "nvidia,p3450-0000", "nvidia,tegra210"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c at 7000d000"; + i2c2 = "/i2c at 7000c400"; + i2c3 = "/i2c at 7000c500"; + i2c4 = "/i2c at 7000c700"; + sdhci0 = "/sdhci at 700b0600"; + sdhci1 = "/sdhci at 700b0000"; + spi0 = "/spi at 70410000"; + usb0 = "/usb at 7d000000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0xc0000000>; + }; + + pcie-controller at 01003000 { + status = "okay"; + + pci at 1,0 { + status = "okay"; + }; + + pci at 2,0 { + status = "okay"; + }; + }; + + serial at 70006000 { + status = "okay"; + }; + + padctl at 7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + xusb { + nvidia,lanes = "otg-1", "otg-2"; + nvidia,function = "xusb"; + nvidia,iddq = <0>; + }; + + usb3 { + nvidia,lanes = "pcie-5", "pcie-6"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie-x1 { + nvidia,lanes = "pcie-0"; + nvidia,function = "pcie-x1"; + nvidia,iddq = <0>; + }; + + pcie-x4 { + nvidia,lanes = "pcie-1", "pcie-2", + "pcie-3", "pcie-4"; + nvidia,function = "pcie-x4"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; + + sdhci at 700b0000 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + }; + + i2c at 7000c400 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c at 7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c at 7000c700 { + status = "okay"; + clock-frequency = <400000>; + }; + + i2c at 7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; + + spi at 70410000 { + status = "okay"; + }; + + usb at 7d000000 { + status = "okay"; + dr_mode = "peripheral"; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock at 0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +};
arch/arm/mach-tegra/tegra210/Kconfig +7 -0
@@ -35,6 +35,12 @@ config TARGET_P2571 help P2571 is a P2530 married to a P1963 I/O board +config TARGET_P3450_0000 + bool "NVIDIA Jetson Nano Development Kit" + select BOARD_LATE_INIT + help + P3450-0000 is a P3448 CPU board married to a P3449 I/O board. + endchoice config SYS_SOC
@@ -47,5 +53,6 @@ source "board/nvidia/e2220-1170/Kconfig" source "board/nvidia/p2371-0000/Kconfig" source "board/nvidia/p2371-2180/Kconfig" source "board/nvidia/p2571/Kconfig" +source "board/nvidia/p3450-0000/Kconfig" endif
board/nvidia/p3450-0000/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_P3450_0000 + +config SYS_BOARD + default "p3450-0000" + +config SYS_VENDOR + default "nvidia" + +config SYS_CONFIG_NAME + default "p3450-0000" + +endif
board/nvidia/p3450-0000/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +P3450-0000 BOARD +M: Tom Warren <[email protected]> +S: Maintained +F: board/nvidia/p3450-0000/ +F: include/configs/p3450-0000.h +F: configs/p3450-0000_defconfig
board/nvidia/p3450-0000/Makefile new file +8 -0
@@ -0,0 +1,8 @@ +# +# (C) Copyright 2018 +# NVIDIA Corporation <www.nvidia.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += p3450-0000.o
board/nvidia/p3450-0000/p3450-0000.c new file +143 -0
143 lines not on this page · raw message
board/nvidia/p3450-0000/pinmux-config-p3450-0000.h new file +257 -0
257 lines not on this page · raw message
configs/p3450-0000_defconfig new file +54 -0
54 lines not on this page · raw message
include/configs/p3450-0000.h new file +44 -0
44 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH v2 15/15 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Quoted 15 lines · Thierry Reding
From: Thierry Reding <[email protected]>
The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for storage.
HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity.
A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano.
arch/arm/dts/tegra210-p3450-0000.dts line 6
Quoted 3 lines
arch/arm/dts/tegra210-p3450-0000.dts +2
-0+/ { + model = "NVIDIA Jetson Nano Development Kit";
Technically, it's marketed as a "Developer Kit", not a "Development Kit".
arch/arm/dts/tegra210-p3450-0000.dts line 19
Quoted 7 lines
arch/arm/dts/tegra210-p3450-0000.dts +7
-0+ aliases { + i2c0 = "/i2c at 7000d000"; + i2c2 = "/i2c at 7000c400"; + i2c3 = "/i2c at 7000c500"; + i2c4 = "/i2c at 7000c700"; + sdhci0 = "/sdhci at 700b0600"; + sdhci1 = "/sdhci at 700b0000";
SKU 0 (the -0000 in the board name) only has 1 SD card slot and no eMMC.
I personally would prefer a different build of U-Boot for each SKU (or at least a separate DT), so that each U-Boot exposes exactly what's present, not the union of all SKUs. That said, I know there's resistance to that in our downstream builds of U-Boot for L4T.
arch/arm/mach-tegra/tegra210/Kconfig config TARGET_P2571 · line 39
Quoted 3 lines
arch/arm/mach-tegra/tegra210/Kconfig +2
-0+config TARGET_P3450_0000 + bool "NVIDIA Jetson Nano Development Kit"
Developer.
board/nvidia/p3450-0000/pinmux-config-p3450-0000.h line 13
Quoted 8 lines
board/nvidia/p3450-0000/pinmux-config-p3450-0000.h +7
-0+/* +* THIS FILE IS AUTO-GENERATED - DO NOT EDIT! +* +* To generate this file, use the tegra-pinmux-scripts tool available from +* https://github.com/NVIDIA/tegra-pinmux-scripts +* Run "board-to-uboot.py p3450-0000". +*/
I'd like to see the pinmux-scripts patches. And some questions there:
- Confirm this is for the A02 board revision.
- Confirm which pinmux spreadsheet version the data came from.
- Does this copy of the file delete the GPIO setup entries that are different between HW A01 and A02, so it will run on both boards, or does it contain everything so that it's only valid for A02 HW?
We are only shipping A02 publicly, so I think it makes sense to include the complete pinmux table here, and let internal NVIDIA users of A01 just use only the downstream code.
include/configs/p3450-0000.h line 36
Quoted 9 lines
include/configs/p3450-0000.h +7
-0+#define CONFIG_PREBOOT + +#define BOARD_EXTRA_ENV_SETTINGS \ + "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ + "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ + "source ${scriptaddr}; " \ + "fi\0"
We might want to hold off on that until we've discussed what we want to do for preboot scripts and environment in L4T, so that we don't introduce some downstream/upstream incompatibility split here?
PATCH v2 15/15 ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Quoted 15 lines · Stephen Warren
Quoted 13 lines · Thierry Reding
From: Thierry Reding <[email protected]>
The Jetson Nano Developer Kit is a Tegra X1 based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4 GB of LPDDR4, an SPI NOR flash for early boot firmware and an SD card slot used for storage.
HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity.
A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano.
Quoted 6 lines
arch/arm/dts/tegra210-p3450-0000.dts line 6
Quoted 4 lines
arch/arm/dts/tegra210-p3450-0000.dts +2
-0+/ { + model = "NVIDIA Jetson Nano Development Kit";Technically, it's marketed as a "Developer Kit", not a "Development Kit".
Good catch. Fixed now.
Quoted 10 lines
arch/arm/dts/tegra210-p3450-0000.dts line 19
Quoted 7 lines
arch/arm/dts/tegra210-p3450-0000.dts +7
-0+ aliases { + i2c0 = "/i2c at 7000d000"; + i2c2 = "/i2c at 7000c400"; + i2c3 = "/i2c at 7000c500"; + i2c4 = "/i2c at 7000c700"; + sdhci0 = "/sdhci at 700b0600"; + sdhci1 = "/sdhci at 700b0000";SKU 0 (the -0000 in the board name) only has 1 SD card slot and no eMMC.
Quoted 4 lines
I personally would prefer a different build of U-Boot for each SKU (or at least a separate DT), so that each U-Boot exposes exactly what's present, not the union of all SKUs. That said, I know there's resistance to that in our downstream builds of U-Boot for L4T.
I had realized that at the last minute and removed the sdhci at 700b0600 node but forgot to remove the alias. I've removed it now.
Quoted 6 lines
arch/arm/mach-tegra/tegra210/Kconfig config TARGET_P2571 · line 39
Quoted 3 lines
arch/arm/mach-tegra/tegra210/Kconfig +2
-0+config TARGET_P3450_0000 + bool "NVIDIA Jetson Nano Development Kit"Developer.
Quoted 11 lines
board/nvidia/p3450-0000/pinmux-config-p3450-0000.h line 13
Quoted 8 lines
board/nvidia/p3450-0000/pinmux-config-p3450-0000.h +7
-0+/* +* THIS FILE IS AUTO-GENERATED - DO NOT EDIT! +* +* To generate this file, use the tegra-pinmux-scripts tool available from +* https://github.com/NVIDIA/tegra-pinmux-scripts +* Run "board-to-uboot.py p3450-0000". +*/ I'd like to see the pinmux-scripts patches. And some questions there:
- Confirm this is for the A02 board revision.
I just went through the process again of extracting the data from the pinmux sheet and it seems like there are subtle differences. But, yes, the new version is for the A02 revision of the board.
Quoted 1 line
- Confirm which pinmux spreadsheet version the data came from.
I've added a comment providing the origin of the data to the tegra-pinmux-scripts patch that I've prepared.
Quoted 7 lines
- Does this copy of the file delete the GPIO setup entries that are different between HW A01 and A02, so it will run on both boards, or does it contain everything so that it's only valid for A02 HW?
We are only shipping A02 publicly, so I think it makes sense to include the complete pinmux table here, and let internal NVIDIA users of A01 just use only the downstream code.
The tegra-pinmux-scripts patch contains an unmodified version of the data extracted from the pinmux spreadsheet, so I'm assuming that it has A02 specific settings for the GPIOs. I agree that there's no need to support anything prior to A02 in U-Boot if that hardware was never publicly available.
Quoted 13 lines
include/configs/p3450-0000.h line 36
Quoted 9 lines
include/configs/p3450-0000.h +7
-0+#define CONFIG_PREBOOT + +#define BOARD_EXTRA_ENV_SETTINGS \ + "preboot=if test -e mmc 1:1 /u-boot-preboot.scr; then " \ + "load mmc 1:1 ${scriptaddr} /u-boot-preboot.scr; " \ + "source ${scriptaddr}; " \ + "fi\0"We might want to hold off on that until we've discussed what we want to do for preboot scripts and environment in L4T, so that we don't introduce some downstream/upstream incompatibility split here?
Good point, I'll remove this from the patch for now.
Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190320/386d4b51/attachment.sig>
v2 cover ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
In reply to Thierry RedingHi Thierry,
Quoted 8 lines
This set of patches move some code from the Tegra186 SoC specific directory to a common location so that it can be more easily shared. Since the differences between Tegra186 and earlier generations are now very small, the builds are unified to avoid duplication of code.
We also add support for accessing the PMC on systems where it can only be accessed from TrustZone.
Quoted 7 lines
Finally, all of this is used to implement support for the recently announced NVIDIA Jetson Nano Developer Kit.
These patches, along with patches to enable network booting[0], can also be found in the p3450 branch of the following repository:
I've tested this on both the Jetson TX1 and TX2 and I've very pleased to see this series. Overall it works fine with the 28.x SDK I've tested with in the past. I have one problem, which I also saw with my previous hacked up version of the NV patches I had to boot the TX1 with cboot, when booting with UEFI I get the early boot crash below (earlyprintk cmd line args need) but if I put a line in the grub.cfg for grub to load the devicetree it boots fine. I suspect, but aren't entirely sure, that the fdt_addr_r is getting stomped on somewhere, or is inaccessible, when booted with UEFI where it's fine with extlinux booting.
Peter
EFI stub: Booting Linux Kernel...
EFI stub: EFI_RNG_PROTOCOL unavailable, no randomness supplied EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.1.0-0.rc1.git0.1.fc29.aarch64 (perobins at morpheus.roving-it.com) (gcc version 8.1.1 20180626 (Red Hat Cross 8.1.1-3) (GCC)) #1 SMP Tue Mar 19 16:05:25 GMT 2019 [ 0.000000] Machine model: NVIDIA P2771-0000-500 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Das U-Boot [ 0.000000] efi: SMBIOS=0xefffb000 MEMRESERVE=0xd0915040 [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000003100000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] NUMA: NODE_DATA [mem 0x2751f1780-0x2751fefff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002767fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087efafff] [ 0.000000] node 0: [mem 0x0000000087efb000-0x0000000087f04fff] [ 0.000000] node 0: [mem 0x0000000087f05000-0x00000000efff7fff] [ 0.000000] node 0: [mem 0x00000000efff8000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x00000000f0200000-0x0000000275ffffff] [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff] [ 0.000000] Zeroed struct page in unavailable ranges: 18 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] On node 0 totalpages: 2056192 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63 [ 0.000000] Normal zone: 23968 pages used for memmap [ 0.000000] Normal zone: 1532416 pages, LIFO batch:63 [ 0.000000] Failed to find device node for boot cpu [ 0.000000] missing boot CPU MPIDR, not enabling secondaries [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55064 r8192 d30952 u94208 [ 0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2024032 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.1.0-0.rc1.git0.1.fc29.aarch64 root=UUID=fe563825-bdab-461d-9cbf-e340a971fa61 ro console=ttyS0,115200 earlycon uefi_debug earlyprintk=serial,ttyS0,115200 debug [ 0.000000] software IO TLB: mapped [mem 0xf7fff000-0xfbfff000] (64MB) [ 0.000000] Memory: 7889768K/8224768K available (11068K kernel code, 2032K rwdata, 4808K rodata, 5952K init, 935K bss, 269464K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x4c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40204 entries in 158 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu:RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] timer_probe: no matching timers found [ 0.000000] Kernel panic - not syncing: Unable to initialise architected timer. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc1.git0.1.fc29.aarch64 #1 [ 0.000000] Hardware name: NVIDIA P2771-0000-500 (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x128 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x12c/0x2dc [ 0.000000] time_init+0x34/0x4c [ 0.000000] start_kernel+0x354/0x4c0 [ 0.000000] ---[ end Kernel panic - not syncing: Unable to
initialise architected timer. ]---
Quoted 89 lines
Thanks,
Thierry[0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
Thierry Reding (15):
ARM: tegra: Use common header for PMU declarations
ARM: tegra: Guard clock code with aKconfigsymbol
ARM: tegra: Guard GP pad control code with aKconfigsymbol
ARM: tegra: Guard memory controller code with aKconfigsymbol
ARM: tegra: Guard pin controller code with aKconfigsymbol
ARM: tegra: Guard powergate code with aKconfigsymbol
ARM: tegra: Fixsave_boot_params()prototype
ARM: tegra: Allow boards to override boot target devices
ARM: tegra: Support TZ-only access to PMC
ARM: tegra: Workaround UDC boot issues only if necessary
ARM: tegra: Restore DRAM bank count
ARM: tegra: Unify Tegra186 builds
ARM: tegra: Implementcboot_save_boot_params()in C
ARM: tegra: Implementcboot_get_ethaddr()
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportarch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++ arch/arm/include/asm/arch-tegra/cboot.h | 45 +++ arch/arm/include/asm/arch-tegra/pmc.h | 20 +- .../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +- arch/arm/include/asm/arch-tegra/tegra.h | 6 + arch/arm/include/asm/arch-tegra114/pmu.h | 12 - arch/arm/include/asm/arch-tegra124/pmu.h | 13 - arch/arm/include/asm/arch-tegra210/pmu.h | 13 - arch/arm/include/asm/arch-tegra30/pmu.h | 12 - arch/arm/mach-tegra/Kconfig | 31 ++ arch/arm/mach-tegra/Makefile | 16 +- arch/arm/mach-tegra/board.c | 41 ++- arch/arm/mach-tegra/board186.c | 32 -- arch/arm/mach-tegra/board2.c | 37 ++- arch/arm/mach-tegra/cache.c | 2 + .../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++-- arch/arm/mach-tegra/clock.c | 13 +- arch/arm/mach-tegra/cmd_enterrcm.c | 6 +- arch/arm/mach-tegra/cpu.c | 20 +- arch/arm/mach-tegra/emc.c | 2 +- arch/arm/mach-tegra/lowlevel_init.S | 39 --- arch/arm/mach-tegra/pmc.c | 92 ++++++ arch/arm/mach-tegra/powergate.c | 11 +- arch/arm/mach-tegra/tegra186/Makefile | 4 - arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 -- arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 ----------- arch/arm/mach-tegra/tegra210/Kconfig | 7 + board/nvidia/p2771-0000/p2771-0000.c | 10 +- board/nvidia/p3450-0000/Kconfig | 12 + board/nvidia/p3450-0000/MAINTAINERS | 6 + board/nvidia/p3450-0000/Makefile | 8 + board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++ .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++ configs/p2771-0000-000_defconfig | 2 +- configs/p2771-0000-500_defconfig | 2 +- configs/p3450-0000_defconfig | 54 ++++ include/configs/p3450-0000.h | 44 +++ include/configs/tegra-common-post.h | 2 + 38 files changed, 1230 insertions(+), 392 deletions(-) create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%) delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h delete mode 100644 arch/arm/mach-tegra/board186.c rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%) delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S create mode 100644 arch/arm/mach-tegra/pmc.c delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c create mode 100644 board/nvidia/p3450-0000/Kconfig create mode 100644 board/nvidia/p3450-0000/MAINTAINERS create mode 100644 board/nvidia/p3450-0000/Makefile create mode 100644 board/nvidia/p3450-0000/p3450-0000.c create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h create mode 100644 configs/p3450-0000_defconfig create mode 100644 include/configs/p3450-0000.h--
2.21.0_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
v2 cover ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Quoted 18 lines · Peter Robinson
Hi Thierry,
Quoted 8 lines
This set of patches move some code from the Tegra186 SoC specific directory to a common location so that it can be more easily shared. Since the differences between Tegra186 and earlier generations are now very small, the builds are unified to avoid duplication of code.
We also add support for accessing the PMC on systems where it can only be accessed from TrustZone.
Quoted 7 lines
Finally, all of this is used to implement support for the recently announced NVIDIA Jetson Nano Developer Kit.
These patches, along with patches to enable network booting[0], can also be found in the p3450 branch of the following repository:
Quoted 10 lines
I've tested this on both the Jetson TX1 and TX2 and I've very pleased to see this series. Overall it works fine with the 28.x SDK I've tested with in the past. I have one problem, which I also saw with my previous hacked up version of the NV patches I had to boot the TX1 with cboot, when booting with UEFI I get the early boot crash below (earlyprintk cmd line args need) but if I put a line in the grub.cfg for grub to load the devicetree it boots fine. I suspect, but aren't entirely sure, that the
fdt_addr_ris getting stomped on somewhere, or is inaccessible, when booted with UEFI where it's fine with extlinux booting.
I'm not sure I understand exactly how UEFI boot works in conjunction with U-Boot. Where does the FDT come from in that set up? Does U-Boot already load it from somewhere and pass it to Linux via UEFI? Or does U-Boot pass on its builtin FDT? If the latter, that's not something that we currently support, so I'm not surprised that it doesn't work.
Given the error message before the crash, I think you might get a little further if you copy the "timer" node from Linux's tegra186.dtsi to that in U-Boot.
Thierry
Quoted 82 lines
EFI stub: Booting Linux Kernel...
EFI stub:EFI_RNG_PROTOCOLunavailable, no randomness supplied EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.1.0-0.rc1.git0.1.fc29.aarch64 (perobins at morpheus.roving-it.com) (gcc version 8.1.1 20180626 (Red Hat Cross 8.1.1-3) (GCC)) #1 SMP Tue Mar 19 16:05:25 GMT 2019 [ 0.000000] Machine model: NVIDIA P2771-0000-500 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Das U-Boot [ 0.000000] efi: SMBIOS=0xefffb000 MEMRESERVE=0xd0915040 [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000003100000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] NUMA: NODE_DATA [mem 0x2751f1780-0x2751fefff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002767fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087efafff] [ 0.000000] node 0: [mem 0x0000000087efb000-0x0000000087f04fff] [ 0.000000] node 0: [mem 0x0000000087f05000-0x00000000efff7fff] [ 0.000000] node 0: [mem 0x00000000efff8000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x00000000f0200000-0x0000000275ffffff] [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff] [ 0.000000] Zeroed struct page in unavailable ranges: 18 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] On node 0 totalpages: 2056192 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63 [ 0.000000] Normal zone: 23968 pages used for memmap [ 0.000000] Normal zone: 1532416 pages, LIFO batch:63 [ 0.000000] Failed to find device node for boot cpu [ 0.000000] missing boot CPU MPIDR, not enabling secondaries [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55064 r8192 d30952 u94208 [ 0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2024032 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.1.0-0.rc1.git0.1.fc29.aarch64 root=UUID=fe563825-bdab-461d-9cbf-e340a971fa61 ro console=ttyS0,115200 earlycon uefi_debug earlyprintk=serial,ttyS0,115200 debug [ 0.000000] software IO TLB: mapped [mem 0xf7fff000-0xfbfff000] (64MB) [ 0.000000] Memory: 7889768K/8224768K available (11068K kernel code, 2032K rwdata, 4808K rodata, 5952K init, 935K bss, 269464K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x4c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40204 entries in 158 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu:RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] timer_probe: no matching timers found [ 0.000000] Kernel panic - not syncing: Unable to initialise architected timer. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc1.git0.1.fc29.aarch64 #1 [ 0.000000] Hardware name: NVIDIA P2771-0000-500 (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x128 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x12c/0x2dc [ 0.000000] time_init+0x34/0x4c [ 0.000000] start_kernel+0x354/0x4c0 [ 0.000000] ---[ end Kernel panic - not syncing: Unable to
Quoted 92 lines
initialise architected timer. ]---
Quoted 89 lines
Thanks,
Thierry[0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
Thierry Reding (15):
ARM: tegra: Use common header for PMU declarations
ARM: tegra: Guard clock code with aKconfigsymbol
ARM: tegra: Guard GP pad control code with aKconfigsymbol
ARM: tegra: Guard memory controller code with aKconfigsymbol
ARM: tegra: Guard pin controller code with aKconfigsymbol
ARM: tegra: Guard powergate code with aKconfigsymbol
ARM: tegra: Fixsave_boot_params()prototype
ARM: tegra: Allow boards to override boot target devices
ARM: tegra: Support TZ-only access to PMC
ARM: tegra: Workaround UDC boot issues only if necessary
ARM: tegra: Restore DRAM bank count
ARM: tegra: Unify Tegra186 builds
ARM: tegra: Implementcboot_save_boot_params()in C
ARM: tegra: Implementcboot_get_ethaddr()
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportarch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++ arch/arm/include/asm/arch-tegra/cboot.h | 45 +++ arch/arm/include/asm/arch-tegra/pmc.h | 20 +- .../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +- arch/arm/include/asm/arch-tegra/tegra.h | 6 + arch/arm/include/asm/arch-tegra114/pmu.h | 12 - arch/arm/include/asm/arch-tegra124/pmu.h | 13 - arch/arm/include/asm/arch-tegra210/pmu.h | 13 - arch/arm/include/asm/arch-tegra30/pmu.h | 12 - arch/arm/mach-tegra/Kconfig | 31 ++ arch/arm/mach-tegra/Makefile | 16 +- arch/arm/mach-tegra/board.c | 41 ++- arch/arm/mach-tegra/board186.c | 32 -- arch/arm/mach-tegra/board2.c | 37 ++- arch/arm/mach-tegra/cache.c | 2 + .../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++-- arch/arm/mach-tegra/clock.c | 13 +- arch/arm/mach-tegra/cmd_enterrcm.c | 6 +- arch/arm/mach-tegra/cpu.c | 20 +- arch/arm/mach-tegra/emc.c | 2 +- arch/arm/mach-tegra/lowlevel_init.S | 39 --- arch/arm/mach-tegra/pmc.c | 92 ++++++ arch/arm/mach-tegra/powergate.c | 11 +- arch/arm/mach-tegra/tegra186/Makefile | 4 - arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 -- arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 ----------- arch/arm/mach-tegra/tegra210/Kconfig | 7 + board/nvidia/p2771-0000/p2771-0000.c | 10 +- board/nvidia/p3450-0000/Kconfig | 12 + board/nvidia/p3450-0000/MAINTAINERS | 6 + board/nvidia/p3450-0000/Makefile | 8 + board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++ .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++ configs/p2771-0000-000_defconfig | 2 +- configs/p2771-0000-500_defconfig | 2 +- configs/p3450-0000_defconfig | 54 ++++ include/configs/p3450-0000.h | 44 +++ include/configs/tegra-common-post.h | 2 + 38 files changed, 1230 insertions(+), 392 deletions(-) create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%) delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h delete mode 100644 arch/arm/mach-tegra/board186.c rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%) delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S create mode 100644 arch/arm/mach-tegra/pmc.c delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c create mode 100644 board/nvidia/p3450-0000/Kconfig create mode 100644 board/nvidia/p3450-0000/MAINTAINERS create mode 100644 board/nvidia/p3450-0000/Makefile create mode 100644 board/nvidia/p3450-0000/p3450-0000.c create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h create mode 100644 configs/p3450-0000_defconfig create mode 100644 include/configs/p3450-0000.h--
2.21.0_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190326/ea407e30/attachment.sig>
v2 cover ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Quoted 27 lines
Quoted 16 lines
Quoted 8 lines
This set of patches move some code from the Tegra186 SoC specific directory to a common location so that it can be more easily shared. Since the differences between Tegra186 and earlier generations are now very small, the builds are unified to avoid duplication of code.
We also add support for accessing the PMC on systems where it can only be accessed from TrustZone.
Quoted 7 lines
Finally, all of this is used to implement support for the recently announced NVIDIA Jetson Nano Developer Kit.
These patches, along with patches to enable network booting[0], can also be found in the p3450 branch of the following repository:
Quoted 10 lines
I've tested this on both the Jetson TX1 and TX2 and I've very pleased to see this series. Overall it works fine with the 28.x SDK I've tested with in the past. I have one problem, which I also saw with my previous hacked up version of the NV patches I had to boot the TX1 with cboot, when booting with UEFI I get the early boot crash below (earlyprintk cmd line args need) but if I put a line in the grub.cfg for grub to load the devicetree it boots fine. I suspect, but aren't entirely sure, that the
fdt_addr_ris getting stomped on somewhere, or is inaccessible, when booted with UEFI where it's fine with extlinux booting.
Quoted 2 lines
I'm not sure I understand exactly how UEFI boot works in conjunction with U-Boot. Where does the FDT come from in that set up? Does U-Boot
It's similar to the extlinux support in that it loads it off the disk if it can find it from the kernel. In my case I tried loading it from one provided by the kernel on the U-Boot cmd line and running it manually:
load mmc 1:1 ${kernel_addr_r} efi/fedora/grubaa64.efi load mmc 1:2 ${fdt_addr_r} /dtb/nvidia/tegra186-p2771-0000.dtb bootefi ${kernel_addr_r} ${fdt_addr_r}
The above crashed with the one below, if I load it by adding the line below to the grub config it boots fine.
devicetree ($root)/dtb/nvidia/tegra186-p2771-0000.dtb
Quoted 3 lines
already load it from somewhere and pass it to Linux via UEFI? Or does U-Boot pass on its builtin FDT? If the latter, that's not something that we currently support, so I'm not surprised that it doesn't work.
So if U-Boot can't fine it on disk it will fail back to the one provided by U-Boot but in the above that's not the case.
Quoted 3 lines
Given the error message before the crash, I think you might get a little further if you copy the "timer" node from Linux's
tegra186.dtsito that in U-Boot.
Possibly but I don't believe it's using the U-Boot DT, at least based on my experience from all the other platforms we support it should be loading the kernel provided one off disk, unless the U-Boot it stomping on that one some how later in the process.
Peter
Quoted 176 lines
Thierry
Quoted 174 lines
EFI stub: Booting Linux Kernel...
EFI stub:EFI_RNG_PROTOCOLunavailable, no randomness supplied EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.1.0-0.rc1.git0.1.fc29.aarch64 (perobins at morpheus.roving-it.com) (gcc version 8.1.1 20180626 (Red Hat Cross 8.1.1-3) (GCC)) #1 SMP Tue Mar 19 16:05:25 GMT 2019 [ 0.000000] Machine model: NVIDIA P2771-0000-500 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Das U-Boot [ 0.000000] efi: SMBIOS=0xefffb000 MEMRESERVE=0xd0915040 [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000003100000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] NUMA: NODE_DATA [mem 0x2751f1780-0x2751fefff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002767fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087efafff] [ 0.000000] node 0: [mem 0x0000000087efb000-0x0000000087f04fff] [ 0.000000] node 0: [mem 0x0000000087f05000-0x00000000efff7fff] [ 0.000000] node 0: [mem 0x00000000efff8000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x00000000f0200000-0x0000000275ffffff] [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff] [ 0.000000] Zeroed struct page in unavailable ranges: 18 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] On node 0 totalpages: 2056192 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63 [ 0.000000] Normal zone: 23968 pages used for memmap [ 0.000000] Normal zone: 1532416 pages, LIFO batch:63 [ 0.000000] Failed to find device node for boot cpu [ 0.000000] missing boot CPU MPIDR, not enabling secondaries [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55064 r8192 d30952 u94208 [ 0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2024032 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.1.0-0.rc1.git0.1.fc29.aarch64 root=UUID=fe563825-bdab-461d-9cbf-e340a971fa61 ro console=ttyS0,115200 earlycon uefi_debug earlyprintk=serial,ttyS0,115200 debug [ 0.000000] software IO TLB: mapped [mem 0xf7fff000-0xfbfff000] (64MB) [ 0.000000] Memory: 7889768K/8224768K available (11068K kernel code, 2032K rwdata, 4808K rodata, 5952K init, 935K bss, 269464K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x4c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40204 entries in 158 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu:RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] timer_probe: no matching timers found [ 0.000000] Kernel panic - not syncing: Unable to initialise architected timer. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc1.git0.1.fc29.aarch64 #1 [ 0.000000] Hardware name: NVIDIA P2771-0000-500 (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x128 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x12c/0x2dc [ 0.000000] time_init+0x34/0x4c [ 0.000000] start_kernel+0x354/0x4c0 [ 0.000000] ---[ end Kernel panic - not syncing: Unable toinitialise architected timer. ]---
Quoted 89 lines
Thanks,
Thierry[0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
Thierry Reding (15):
ARM: tegra: Use common header for PMU declarations
ARM: tegra: Guard clock code with aKconfigsymbol
ARM: tegra: Guard GP pad control code with aKconfigsymbol
ARM: tegra: Guard memory controller code with aKconfigsymbol
ARM: tegra: Guard pin controller code with aKconfigsymbol
ARM: tegra: Guard powergate code with aKconfigsymbol
ARM: tegra: Fixsave_boot_params()prototype
ARM: tegra: Allow boards to override boot target devices
ARM: tegra: Support TZ-only access to PMC
ARM: tegra: Workaround UDC boot issues only if necessary
ARM: tegra: Restore DRAM bank count
ARM: tegra: Unify Tegra186 builds
ARM: tegra: Implementcboot_save_boot_params()in C
ARM: tegra: Implementcboot_get_ethaddr()
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportarch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++ arch/arm/include/asm/arch-tegra/cboot.h | 45 +++ arch/arm/include/asm/arch-tegra/pmc.h | 20 +- .../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +- arch/arm/include/asm/arch-tegra/tegra.h | 6 + arch/arm/include/asm/arch-tegra114/pmu.h | 12 - arch/arm/include/asm/arch-tegra124/pmu.h | 13 - arch/arm/include/asm/arch-tegra210/pmu.h | 13 - arch/arm/include/asm/arch-tegra30/pmu.h | 12 - arch/arm/mach-tegra/Kconfig | 31 ++ arch/arm/mach-tegra/Makefile | 16 +- arch/arm/mach-tegra/board.c | 41 ++- arch/arm/mach-tegra/board186.c | 32 -- arch/arm/mach-tegra/board2.c | 37 ++- arch/arm/mach-tegra/cache.c | 2 + .../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++-- arch/arm/mach-tegra/clock.c | 13 +- arch/arm/mach-tegra/cmd_enterrcm.c | 6 +- arch/arm/mach-tegra/cpu.c | 20 +- arch/arm/mach-tegra/emc.c | 2 +- arch/arm/mach-tegra/lowlevel_init.S | 39 --- arch/arm/mach-tegra/pmc.c | 92 ++++++ arch/arm/mach-tegra/powergate.c | 11 +- arch/arm/mach-tegra/tegra186/Makefile | 4 - arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 -- arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 ----------- arch/arm/mach-tegra/tegra210/Kconfig | 7 + board/nvidia/p2771-0000/p2771-0000.c | 10 +- board/nvidia/p3450-0000/Kconfig | 12 + board/nvidia/p3450-0000/MAINTAINERS | 6 + board/nvidia/p3450-0000/Makefile | 8 + board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++ .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++ configs/p2771-0000-000_defconfig | 2 +- configs/p2771-0000-500_defconfig | 2 +- configs/p3450-0000_defconfig | 54 ++++ include/configs/p3450-0000.h | 44 +++ include/configs/tegra-common-post.h | 2 + 38 files changed, 1230 insertions(+), 392 deletions(-) create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%) delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h delete mode 100644 arch/arm/mach-tegra/board186.c rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%) delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S create mode 100644 arch/arm/mach-tegra/pmc.c delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c create mode 100644 board/nvidia/p3450-0000/Kconfig create mode 100644 board/nvidia/p3450-0000/MAINTAINERS create mode 100644 board/nvidia/p3450-0000/Makefile create mode 100644 board/nvidia/p3450-0000/p3450-0000.c create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h create mode 100644 configs/p3450-0000_defconfig create mode 100644 include/configs/p3450-0000.h--
2.21.0_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
v2 cover ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support
Quoted 43 lines · Peter Robinson
Quoted 27 lines
Quoted 16 lines
Quoted 8 lines
This set of patches move some code from the Tegra186 SoC specific directory to a common location so that it can be more easily shared. Since the differences between Tegra186 and earlier generations are now very small, the builds are unified to avoid duplication of code.
We also add support for accessing the PMC on systems where it can only be accessed from TrustZone.
Quoted 7 lines
Finally, all of this is used to implement support for the recently announced NVIDIA Jetson Nano Developer Kit.
These patches, along with patches to enable network booting[0], can also be found in the p3450 branch of the following repository:
Quoted 10 lines
I've tested this on both the Jetson TX1 and TX2 and I've very pleased to see this series. Overall it works fine with the 28.x SDK I've tested with in the past. I have one problem, which I also saw with my previous hacked up version of the NV patches I had to boot the TX1 with cboot, when booting with UEFI I get the early boot crash below (earlyprintk cmd line args need) but if I put a line in the grub.cfg for grub to load the devicetree it boots fine. I suspect, but aren't entirely sure, that the
fdt_addr_ris getting stomped on somewhere, or is inaccessible, when booted with UEFI where it's fine with extlinux booting.Quoted 2 lines
I'm not sure I understand exactly how UEFI boot works in conjunction with U-Boot. Where does the FDT come from in that set up? Does U-Boot
It's similar to the extlinux support in that it loads it off the disk if it can find it from the kernel. In my case I tried loading it from one provided by the kernel on the U-Boot cmd line and running it manually:
load mmc 1:1 ${kernel_addr_r} efi/fedora/grubaa64.efi load mmc 1:2 ${fdt_addr_r} /dtb/nvidia/tegra186-p2771-0000.dtb bootefi ${kernel_addr_r} ${fdt_addr_r}
The above crashed with the one below, if I load it by adding the line below to the grub config it boots fine.
devicetree ($root)/dtb/nvidia/tegra186-p2771-0000.dtb
Quoted 6 lines
Quoted 3 lines
already load it from somewhere and pass it to Linux via UEFI? Or does U-Boot pass on its builtin FDT? If the latter, that's not something that we currently support, so I'm not surprised that it doesn't work.
So if U-Boot can't fine it on disk it will fail back to the one provided by U-Boot but in the above that's not the case.
I think it is. If you look at the following line from the log you posted:
[ 0.000000] Machine model: NVIDIA P2771-0000-500
that string matches exactly what's in the DTB that ships with U-Boot, whereas upstream Linux uses this model string:
NVIDIA Tegra186 P2771-0000 Development Board
Quoted 8 lines
Quoted 3 lines
Given the error message before the crash, I think you might get a little further if you copy the "timer" node from Linux's
tegra186.dtsito that in U-Boot.Possibly but I don't believe it's using the U-Boot DT, at least based on my experience from all the other platforms we support it should be loading the kernel provided one off disk, unless the U-Boot it stomping on that one some how later in the process.
Given the above I don't think it's using the U-Boot that you've loaded from disk, unless the version you have on disk is not the one installed by Linux.
Thierry
Quoted 167 lines
Quoted 167 lines
Quoted 167 lines
EFI stub: Booting Linux Kernel...
EFI stub:EFI_RNG_PROTOCOLunavailable, no randomness supplied EFI stub: Using DTB from configuration table
EFI stub: Exiting boot services and installing virtual address map...[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x411fd073] [ 0.000000] Linux version 5.1.0-0.rc1.git0.1.fc29.aarch64 (perobins at morpheus.roving-it.com) (gcc version 8.1.1 20180626 (Red Hat Cross 8.1.1-3) (GCC)) #1 SMP Tue Mar 19 16:05:25 GMT 2019 [ 0.000000] Machine model: NVIDIA P2771-0000-500 [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by Das U-Boot [ 0.000000] efi: SMBIOS=0xefffb000 MEMRESERVE=0xd0915040 [ 0.000000] cma: Reserved 64 MiB at 0x00000000fc000000 [ 0.000000] earlycon: uart0 at MMIO 0x0000000003100000 (options '') [ 0.000000] printk: bootconsole [uart0] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] NUMA: NODE_DATA [mem 0x2751f1780-0x2751fefff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000002767fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087efafff] [ 0.000000] node 0: [mem 0x0000000087efb000-0x0000000087f04fff] [ 0.000000] node 0: [mem 0x0000000087f05000-0x00000000efff7fff] [ 0.000000] node 0: [mem 0x00000000efff8000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x00000000f0200000-0x0000000275ffffff] [ 0.000000] node 0: [mem 0x0000000276600000-0x00000002767fffff] [ 0.000000] Zeroed struct page in unavailable ranges: 18 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000002767fffff] [ 0.000000] On node 0 totalpages: 2056192 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 0 pages reserved [ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63 [ 0.000000] Normal zone: 23968 pages used for memmap [ 0.000000] Normal zone: 1532416 pages, LIFO batch:63 [ 0.000000] Failed to find device node for boot cpu [ 0.000000] missing boot CPU MPIDR, not enabling secondaries [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55064 r8192 d30952 u94208 [ 0.000000] pcpu-alloc: s55064 r8192 d30952 u94208 alloc=23*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2024032 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos2)/vmlinuz-5.1.0-0.rc1.git0.1.fc29.aarch64 root=UUID=fe563825-bdab-461d-9cbf-e340a971fa61 ro console=ttyS0,115200 earlycon uefi_debug earlyprintk=serial,ttyS0,115200 debug [ 0.000000] software IO TLB: mapped [mem 0xf7fff000-0xfbfff000] (64MB) [ 0.000000] Memory: 7889768K/8224768K available (11068K kernel code, 2032K rwdata, 4808K rodata, 5952K init, 935K bss, 269464K reserved, 65536K cma-reserved) [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x3c/0x4c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 40204 entries in 158 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu:RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] timer_probe: no matching timers found [ 0.000000] Kernel panic - not syncing: Unable to initialise architected timer. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc1.git0.1.fc29.aarch64 #1 [ 0.000000] Hardware name: NVIDIA P2771-0000-500 (DT) [ 0.000000] Call trace: [ 0.000000] dump_backtrace+0x0/0x128 [ 0.000000] show_stack+0x24/0x30 [ 0.000000] dump_stack+0xa8/0xcc [ 0.000000] panic+0x12c/0x2dc [ 0.000000] time_init+0x34/0x4c [ 0.000000] start_kernel+0x354/0x4c0 [ 0.000000] ---[ end Kernel panic - not syncing: Unable toinitialise architected timer. ]---
Quoted 82 lines
Thanks,
Thierry[0]: http://patchwork.ozlabs.org/project/uboot/list/?series=96153
Thierry Reding (15):
ARM: tegra: Use common header for PMU declarations
ARM: tegra: Guard clock code with aKconfigsymbol
ARM: tegra: Guard GP pad control code with aKconfigsymbol
ARM: tegra: Guard memory controller code with aKconfigsymbol
ARM: tegra: Guard pin controller code with aKconfigsymbol
ARM: tegra: Guard powergate code with aKconfigsymbol
ARM: tegra: Fixsave_boot_params()prototype
ARM: tegra: Allow boards to override boot target devices
ARM: tegra: Support TZ-only access to PMC
ARM: tegra: Workaround UDC boot issues only if necessary
ARM: tegra: Restore DRAM bank count
ARM: tegra: Unify Tegra186 builds
ARM: tegra: Implementcboot_save_boot_params()in C
ARM: tegra: Implementcboot_get_ethaddr()
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit supportarch/arm/dts/tegra210-p3450-0000.dts | 130 ++++++++ arch/arm/include/asm/arch-tegra/cboot.h | 45 +++ arch/arm/include/asm/arch-tegra/pmc.h | 20 +- .../asm/{arch-tegra20 => arch-tegra}/pmu.h | 6 +- arch/arm/include/asm/arch-tegra/tegra.h | 6 + arch/arm/include/asm/arch-tegra114/pmu.h | 12 - arch/arm/include/asm/arch-tegra124/pmu.h | 13 - arch/arm/include/asm/arch-tegra210/pmu.h | 13 - arch/arm/include/asm/arch-tegra30/pmu.h | 12 - arch/arm/mach-tegra/Kconfig | 31 ++ arch/arm/mach-tegra/Makefile | 16 +- arch/arm/mach-tegra/board.c | 41 ++- arch/arm/mach-tegra/board186.c | 32 -- arch/arm/mach-tegra/board2.c | 37 ++- arch/arm/mach-tegra/cache.c | 2 + .../{tegra186/nvtboot_board.c => cboot.c} | 280 ++++++++++++++++-- arch/arm/mach-tegra/clock.c | 13 +- arch/arm/mach-tegra/cmd_enterrcm.c | 6 +- arch/arm/mach-tegra/cpu.c | 20 +- arch/arm/mach-tegra/emc.c | 2 +- arch/arm/mach-tegra/lowlevel_init.S | 39 --- arch/arm/mach-tegra/pmc.c | 92 ++++++ arch/arm/mach-tegra/powergate.c | 11 +- arch/arm/mach-tegra/tegra186/Makefile | 4 - arch/arm/mach-tegra/tegra186/nvtboot_ll.S | 20 -- arch/arm/mach-tegra/tegra186/nvtboot_mem.c | 172 ----------- arch/arm/mach-tegra/tegra210/Kconfig | 7 + board/nvidia/p2771-0000/p2771-0000.c | 10 +- board/nvidia/p3450-0000/Kconfig | 12 + board/nvidia/p3450-0000/MAINTAINERS | 6 + board/nvidia/p3450-0000/Makefile | 8 + board/nvidia/p3450-0000/p3450-0000.c | 143 +++++++++ .../p3450-0000/pinmux-config-p3450-0000.h | 257 ++++++++++++++++ configs/p2771-0000-000_defconfig | 2 +- configs/p2771-0000-500_defconfig | 2 +- configs/p3450-0000_defconfig | 54 ++++ include/configs/p3450-0000.h | 44 +++ include/configs/tegra-common-post.h | 2 + 38 files changed, 1230 insertions(+), 392 deletions(-) create mode 100644 arch/arm/dts/tegra210-p3450-0000.dts create mode 100644 arch/arm/include/asm/arch-tegra/cboot.h rename arch/arm/include/asm/{arch-tegra20 => arch-tegra}/pmu.h (73%) delete mode 100644 arch/arm/include/asm/arch-tegra114/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra124/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra210/pmu.h delete mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h delete mode 100644 arch/arm/mach-tegra/board186.c rename arch/arm/mach-tegra/{tegra186/nvtboot_board.c => cboot.c} (50%) delete mode 100644 arch/arm/mach-tegra/lowlevel_init.S create mode 100644 arch/arm/mach-tegra/pmc.c delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_ll.S delete mode 100644 arch/arm/mach-tegra/tegra186/nvtboot_mem.c create mode 100644 board/nvidia/p3450-0000/Kconfig create mode 100644 board/nvidia/p3450-0000/MAINTAINERS create mode 100644 board/nvidia/p3450-0000/Makefile create mode 100644 board/nvidia/p3450-0000/p3450-0000.c create mode 100644 board/nvidia/p3450-0000/pinmux-config-p3450-0000.h create mode 100644 configs/p3450-0000_defconfig create mode 100644 include/configs/p3450-0000.h
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
--
2.21.0_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
https://lists.denx.de/listinfo/u-boot
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190326/4491b456/attachment.sig>