usb: typec: ucsi: add firmware flashing support
Heikki Krogerus
AppliedPATCH v5 2/2 usb: typec: ucsi: add firmware flashing support
Quoted 24 lines · Ajay Gupta
From: Ajay Gupta <[email protected]>
CCGx has two copies of the firmware in addition to the bootloader. If the device is running FW1, FW2 can be updated with the new version. Dual firmware mode allows the CCG device to stay in a PD contract and support USB PD and Type-C functionality while a firmware update is in progress.
First we read the currently flashed firmware version of both primary and secondary firmware and then compare it with version of firmware file to determine if flashing is required.
Command framework is added to support sending commands to CCGx controller. We wait for response after sending the command and then read the response from
RAB_RESPONSEregister.Below commands are supported,
-ENTER_FLASHING
- RESET
-PDPORT_ENABLE
-JUMP_TO_BOOT
-FLASH_ROW_RW
-VALIDATE_FW
Quoted 7 lines
Command specific mutex lock is also added to sync between driver and user threads.
PD port number information is added which is required while sending
PD_PORT_ENABLEcommandSigned-off-by Ajay Gupta <[email protected]>
Applied:
https://github.com/krohei/linux/commit/6acc0b6b0b5041432016cd1c7adc8de20e80bf86
thanks,