clk: imx7ulp: remove snvs clock
PATCH 1/2 clk: imx7ulp: remove snvs clock
Since i.MX7ULP B0 chip, the SNVS module is moved into M4 domain and its clock is also moved into PCC0 which is contorlled by M4, Linux kernel should NOT add it into clock tree.
--- drivers/clk/imx/clk-imx7ulp.c | 1 - 1 file changed, 1 deletion(-)
drivers/clk/imx/clk-imx7ulp.c +0 -1
@@ -151,7 +151,6 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np) clks[IMX7ULP_CLK_DMA1 ] =imx_clk_hw_gate ("dma1" ,"nic1_clk" , base +0x20 ,30 ); clks[IMX7ULP_CLK_RGPIO2P1 ] =imx_clk_hw_gate ("rgpio2p1" ,"nic1_bus_clk" , base +0x3c ,30 ); clks[IMX7ULP_CLK_DMA_MUX1 ] =imx_clk_hw_gate ("dma_mux1" ,"nic1_bus_clk" , base +0x84 ,30 ); - clks[IMX7ULP_CLK_SNVS ] =imx_clk_hw_gate ("snvs" ,"nic1_bus_clk" , base +0x8c ,30 ); clks[IMX7ULP_CLK_CAAM ] =imx_clk_hw_gate ("caam" ,"nic1_clk" , base +0x90 ,30 ); clks[IMX7ULP_CLK_LPTPM4 ] =imx7ulp_clk_composite ("lptpm4" , periph_bus_sels,ARRAY_SIZE (periph_bus_sels), true, false, true, base +0x94 ); clks[IMX7ULP_CLK_LPTPM5 ] =imx7ulp_clk_composite ("lptpm5" , periph_bus_sels,ARRAY_SIZE (periph_bus_sels), true, false, true, base +0x98 );
Signature · 1 line
2.7.4
PATCH 2/2 dt-bindings: clock: imx7ulp: remove SNVS clock
Since i.MX7ULP B0 chip, SNVS module is moved into M4 domain, so remove it from Linux clock table.
--- include/dt-bindings/clock/imx7ulp-clock.h | 1 - 1 file changed, 1 deletion(-)
include/dt-bindings/clock/imx7ulp-clock.h +0 -1
@@ -65,7 +65,6 @@#define IMX7ULP_CLK_FLEXBUS 2#define IMX7ULP_CLK_SEMA42_1 3#define IMX7ULP_CLK_DMA_MUX1 4 -#define IMX7ULP_CLK_SNVS 5#define IMX7ULP_CLK_CAAM 6#define IMX7ULP_CLK_LPTPM4 7#define IMX7ULP_CLK_LPTPM5 8
Signature · 1 line
2.7.4
Ping...
Best Regards!
Anson Huang
Quoted 45 lines
-----Original Message-----
From: Anson Huang
Sent: 2019年2月28日 16:56
To: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; Aisheng Dong <[email protected]>; [email protected]; linux- [email protected]; [email protected]; linux- [email protected]; [email protected]
Cc: dl-linux-imx <[email protected]>
Subject: [PATCH 1/2] clk: imx7ulp: remove snvs clockSince i.MX7ULP B0 chip, the SNVS module is moved into M4 domain and its clock is also moved into PCC0 which is contorlled by M4, Linux kernel should NOT add it into clock tree.
Signed-off-by Anson Huang <[email protected]>--- drivers/clk/imx/clk-imx7ulp.c | 1 - 1 file changed, 1 deletion(-)drivers/clk/imx/clk-imx7ulp.c +0
-0@@ -151,7 +151,6 @@ static void __init imx7ulp_clk_pcc2_init(struct device_node *np) clks[IMX7ULP_CLK_DMA1 ] =imx_clk_hw_gate ("dma1" ,"nic1_clk" , base +0x20 ,30 ); clks[IMX7ULP_CLK_RGPIO2P1 ] =imx_clk_hw_gate ("rgpio2p1" ,"nic1_bus_clk" , base +0x3c ,30 ); clks[IMX7ULP_CLK_DMA_MUX1] =
imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);drivers/clk/imx/clk-imx7ulp.c +0
-1- clks[IMX7ULP_CLK_SNVS] = imx_clk_hw_gate("snvs","
nic1_bus_clk", base +0x8c, 30);
clks[IMX7ULP_CLK_CAAM] = imx_clk_hw_gate("caam",
"nic1_clk", base +0x90, 30);
clks[IMX7ULP_CLK_LPTPM4] = imx7ulp_clk_composite("lptpm4",periph_bus_sels,ARRAY_SIZE(periph_bus_sels), true, false, true, base +0x94);
clks[IMX7ULP_CLK_LPTPM5] = imx7ulp_clk_composite("lptpm5",periph_bus_sels,ARRAY_SIZE(periph_bus_sels), true, false, true, base +0x98);
--
2.7.4
Shawn Guo
AppliedQuoted 6 lines · Anson Huang
Since i.MX7ULP B0 chip, the SNVS module is moved into M4 domain and its clock is also moved into PCC0 which is contorlled by M4, Linux kernel should NOT add it into clock tree.
Signed-off-by Anson Huang <[email protected]>
Applied both, thanks.