regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB
PATCH RESEND 1/1 regulator: tps65086: Fix tps65086_ldoa1_ranges for selector 0xB
selector 0xB (1011) should be 2.6V rather than 2.7V, fit ix.
Table 5-4. LDOA1 Output Voltage Options
VID Bits VOUT VID Bits VOUT VID Bits VOUT VID Bits VOUT
0000 1.35 0100 1.8 1000 2.3 1100 2.85 0001 1.5 0101 1.9 1001 2.4 1101 3.0 0010 1.6 0110 2.0 1010 2.5 1110 3.3 0011 1.7 0111 2.1 1011 2.6 1111 Not Used
Fixes d2a2e729a666 ("regulator: tps65086: Add regulator driver for the TPS65086 PMIC")
Signed-off-by Axel Lin <[email protected]>
Acked-by Andrew F. Davis <[email protected]>
---
This patch was sent on https://lkml.org/lkml/2019/3/4/349
With Andrew's Acked.
drivers/regulator/tps65086-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/tps65086-regulator.c +2 -2
@@ -90,8 +90,8 @@ static const struct regulator_linear_range tps65086_buck345_25mv_ranges[] = {static const struct regulator_linear_range tps65086_ldoa1_ranges[] = {REGULATOR_LINEAR_RANGE (1350000 ,0x0 ,0x0 ,0 ),REGULATOR_LINEAR_RANGE (1500000 ,0x1 ,0x7 ,100000 ), -REGULATOR_LINEAR_RANGE (2300000 ,0x8 ,0xA ,100000 ), -REGULATOR_LINEAR_RANGE (2700000 ,0xB ,0xD ,150000 ), +REGULATOR_LINEAR_RANGE (2300000 ,0x8 ,0xB ,100000 ), +REGULATOR_LINEAR_RANGE (2850000 ,0xC ,0xD ,150000 ),REGULATOR_LINEAR_RANGE (3300000 ,0xE ,0xE ,0 ), };
Signature · 1 line
2.17.1