Skip to contentSkip to conversation

btrfs: Defer setting new inode mode until after do_set_acl succeeds

PATCH In review Nikolay Borisov 3 participants 3 messages Mar 21, 2019 – Mar 22, 2019 Btrfs file system

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 btrfs: Defer setting new inode mode until after do_set_acl succeeds

Currently a reference to inode->i_mode is passed directly to posix_acl_update_mode when setting an ACL which results in the inode's mode always being changed. In case of errors (e.g. in do_set_acl or even starting a transaction) the old mode needs to be re-assigned to ->i_mode. This mode recovery is done only in case do_set_acl fails, which leads to buggy behavior in case btrfs_start_transaction fails.

Fix it by simply setting the new mode to a temporary variable which is assigned to inode->i_mode's only when do_set_acl succeeds. This covers both failure cases explained above.

Fixes db0f220e98eb ("btrfs: start transaction in btrfs_set_acl")

---

Changes since v1:
* Eliminated unrealted newline change (Johannes)
* Fixed logic of when i_mode is set, v1 was causing an uninitialised mode to be assigned to inode->i_mode resulting in fs consistency problems. Fix this by introducing a variable which is set to true when the i_mode needs to be changed. I know this variable could be eliminated by simply initialising mode = inode->i_mode and always assigning it in the if (!ret) branch but I find this somewhat subtle and rather be explicit with the boolean variable.

 fs/btrfs/acl.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
fs/btrfs/acl.c +7 -5
index b722866e1442..ac12a4530540 100644
@@ -112,14 +112,16 @@ static int do_set_acl(struct btrfs_trans_handle *trans, struct inode *inode,
 int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 {
 	int ret;
-	umode_t old_mode = inode->i_mode;
+	umode_t mode;
+	bool change_mode = false;
 	struct btrfs_trans_handle *trans;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 
 	if (type == ACL_TYPE_ACCESS && acl) {
-		ret = posix_acl_update_mode(inode, &inode->i_mode, &acl);
+		ret = posix_acl_update_mode(inode, &mode, &acl);
 		if (ret)
 			return ret;
+		change_mode = true;
 	}
 
 	trans = btrfs_start_transaction(root, 2);
@@ -127,9 +129,9 @@ int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 		return PTR_ERR(trans);
 
 	ret = do_set_acl(trans, inode, acl, type);
-	if (ret) {
-		inode->i_mode = old_mode;
-	} else {
+	if (!ret) {
+		if (change_mode)
+			inode->i_mode = mode;
 		inode_inc_iversion(inode);
 		inode->i_ctime = current_time(inode);
 		set_bit(BTRFS_INODE_COPY_EVERYTHING, &BTRFS_I(inode)->runtime_flags);
Signature · 1 line
2.17.1
#1 lore raw

On 21/03/2019 16:57, Nikolay Borisov wrote:
[...]

Quoted 6 lines

* Fixed logic of when i_mode is set, v1 was causing an uninitialised mode to be assigned to inode->i_mode resulting in fs consistency problems. Fix this by introducing a variable which is set to true when the i_mode needs to be changed. I know this variable could be eliminated by simply initialising mode = inode->i_mode and always assigning it in the if (!ret) branch but I find this somewhat subtle and rather be explicit with the boolean variable.

[...]

fs/btrfs/acl.c int btrfs_set_acl(struct inode *inode, struct posix_acl *acl, int type) · line 134

Quoted 3 lines
fs/btrfs/acl.c +3 -0
+	if (!ret) {
+		if (change_mode)
+			inode->i_mode = mode;

But what about initializing mode by inode->i_mode *and* adding a comment that this is either the saved state or the new one, depending on posix_acl_update_mode()'s outcome?

Signature · 6 lines
Johannes Thumshirn                            SUSE Labs Filesystems
[email protected]                                +49 911 74053 689
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
Key fingerprint = EC38 9CAB C2C4 F25D 8600 D0D0 0393 969D 2D76 0850
Reviewed-by on v2 1/1
#2 lore raw
In reply to Nikolay Borisov
Quoted 15 lines · Nikolay Borisov

Currently a reference to inode->i_mode is passed directly to posix_acl_update_mode when setting an ACL which results in the inode's mode always being changed. In case of errors (e.g. in do_set_acl or even starting a transaction) the old mode needs to be re-assigned to ->i_mode. This mode recovery is done only in case do_set_acl fails, which leads to buggy behavior in case btrfs_start_transaction fails.

Fix it by simply setting the new mode to a temporary variable which is assigned to inode->i_mode's only when do_set_acl succeeds. This covers both failure cases explained above.

Fixes db0f220e98eb ("btrfs: start transaction in btrfs_set_acl")

---

Quoted 8 lines

Changes since v1:
* Eliminated unrealted newline change (Johannes)
* Fixed logic of when i_mode is set, v1 was causing an uninitialised mode to be assigned to inode->i_mode resulting in fs consistency problems. Fix this by introducing a variable which is set to true when the i_mode needs to be changed. I know this variable could be eliminated by simply initialising mode = inode->i_mode and always assigning it in the if (!ret) branch but I find this somewhat subtle and rather be explicit with the boolean variable.

Agreed. I folded the missing mode reset to the patch that introduced it as the Fixes: reference would not work, and adjusted your patch to simplify it again. Changelog adapted accordingly, only that it's not a faix but simplification. Please check it once it's pushed to misc-next.