misc: sram: Add dma-heap-export reserved SRAM area type
Subsystems (2)
RFC PATCH 1/1 misc: sram: Add dma-heap-export reserved SRAM area type
This new export type exposes to userspace the SRAM area as a DMA-Heap, this allows for allocations as DMA-BUFs that can be consumed by various DMA-BUF supporting devices.
Signed-off-by Andrew F. Davis <[email protected]>
---
Hello all,
This is an example user of the currently RFC DMA-HEAP framework. It exports a defined SRAM area showing how various memory presenting devices can use the DMA-HEAP framework to provide DMA-BUF allocations to userspace and other devices.
It has a couple problems still, one being that the SRAM subsystem probes before the DMA-BUF subsystem, can the SRAM driver be changed from postcore_initcall to subsys_initcall or even device_initcall?
Thanks,
Andrew
.../devicetree/bindings/sram/sram.txt | 7 +- drivers/misc/Kconfig | 7 + drivers/misc/Makefile | 1 + drivers/misc/sram-dma-heap.c | 235 ++++++++++++++++++ drivers/misc/sram.c | 20 +- drivers/misc/sram.h | 17 ++ 6 files changed, 282 insertions(+), 5 deletions(-) create mode 100644 drivers/misc/sram-dma-heap.c
Documentation/devicetree/bindings/sram/sram.txt +6 -1
@@ -43,11 +43,16 @@ Optional properties in the area nodes: - export : indicates that the reserved SRAM area may be accessed outside of the kernel, e.g. by bootloader or userspace - protect-exec : Same as 'pool' above but with the additional - constraint that code wil be run from the region and + constraint that code will be run from the region and that the memory is maintained as read-only, executable during code execution. NOTE: This region must be page aligned on start and end in order to properly allow manipulation of the page attributes. +- dma-heap-export : Similar to 'pool' and 'export' this region will be + exported for use by drivers, devices, and userspace + using the DMA-Heaps framework. NOTE: This region must + be page aligned on start and end in order to properly + allow manipulation of the page attributes. - label : the name for the reserved partition, if omitted, the label is taken from the node name excluding the unit address. - clocks : a list of phandle and clock specifier pair that controls the
drivers/misc/Kconfig +7 -0
@@ -487,6 +487,13 @@ config SRAM config SRAM_EXEC bool +config SRAM_DMA_HEAP + bool "Export on-chip SRAM pools using DMA-Heaps" + depends on SRAM + help + This driver allows the export of on-chip SRAM marked as exportable + to userspace using the DMA-Heaps interface. + config VEXPRESS_SYSCFG bool "Versatile Express System Configuration driver" depends on VEXPRESS_CONFIG
drivers/misc/Makefile +1 -0
@@ -49,6 +49,7 @@ obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/ obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o obj-$(CONFIG_SRAM) += sram.o obj-$(CONFIG_SRAM_EXEC) += sram-exec.o +obj-$(CONFIG_SRAM_DMA_HEAP) += sram-dma-heap.o obj-y += mic/ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/
drivers/misc/sram-dma-heap.c new file +235 -0
235 lines not on this page · raw message
drivers/misc/sram.c +16 -4
@@ -122,6 +122,15 @@ static int sram_add_partition(struct sram_dev *sram, struct sram_reserve *block,if (ret)return ret; } +if (block->dma_heap_export) { + ret =sram_add_pool (sram, block, start, part); +if (ret) +return ret; + + ret =sram_dma_heap_export (sram, block, start, part); +if (ret) +return ret; + }if (block->protect_exec) { ret =sram_check_protect_exec (sram, block, part);if (ret)
@@ -222,8 +231,11 @@ static int sram_reserve_regions(struct sram_dev *sram, struct resource *res)if (of_find_property (child,"protect-exec" ,NULL )) block->protect_exec = true; -if ((block->export || block->pool || block->protect_exec) && - block->size) { +if (of_find_property (child,"dma-heap-export" ,NULL )) + block->dma_heap_export = true; + +if ((block->export || block->pool || block->protect_exec || + block->dma_heap_export) && block->size) { exports++; label =NULL ;
@@ -285,8 +297,8 @@ static int sram_reserve_regions(struct sram_dev *sram, struct resource *res) goto err_chunks; } -if ((block->export || block->pool || block->protect_exec) && - block->size) { +if ((block->export || block->pool || block->protect_exec || + block->dma_heap_export) && block->size) { ret =sram_add_partition (sram, block, res->start + block->start);if (ret) {
drivers/misc/sram.h +17 -0
@@ -35,6 +35,7 @@ struct sram_reserve {bool export;bool pool;bool protect_exec; +bool dma_heap_export;const char *label; };
@@ -55,4 +56,20 @@ static inline int sram_add_protect_exec(struct sram_partition *part)return -ENODEV ; }#endif /* CONFIG_SRAM_EXEC */ + +#ifdef CONFIG_SRAM_DMA_HEAP +int sram_dma_heap_export (struct sram_dev *sram, +struct sram_reserve *block, +phys_addr_t start, +struct sram_partition *part); +#else +static inline int sram_dma_heap_export (struct sram_dev *sram, +struct sram_reserve *block, +phys_addr_t start, +struct sram_partition *part) +{ +return 0 ; +} +#endif /* CONFIG_SRAM_DMA_HEAP */ +#endif /* __SRAM_H */
Signature · 1 line
2.21.0