i.MX fixes for 5.1
The following changes since commit 9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:
Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-5.1
for you to fetch changes up to 507aaeeef80d70c46bdf07cda49234b36c2bbdcb:
ARM: imx_v4_v5_defconfig: enable PWM driver (2019-03-22 09:56:11 +0800)
----------------------------------------------------------------
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem caused by commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode").
- Add a missing of_node_put call to fix leaked reference detected by coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style for imx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos in imx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change on driver part.
----------------------------------------------------------------
Kohji Okuno (1):
ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time
Marco Felsch (1):
ARM: dts: pfla02: increase phy reset duration
Masanari Iida (1):
ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi
Michal Vokáč (2):
ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port
ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch
Nishad Kamdar (1):
ARM: dts: imx6ull: Use the correct style for SPDX License Identifier
Uwe Kleine-König (2):
ARM: imx_v6_v7_defconfig: continue compiling the pwm driver
ARM: imx_v4_v5_defconfig: enable PWM driver
Wen Yang (1):
ARM: imx51: fix a leaked reference by adding missing of_node_put
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++--- arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 4 ++-- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 + arch/arm/boot/dts/imx6ull-pinfunc-snvs.h | 2 +- arch/arm/configs/imx_v4_v5_defconfig | 3 +++ arch/arm/configs/imx_v6_v7_defconfig | 2 +- arch/arm/mach-imx/cpuidle-imx6q.c | 27 ++++++++++----------------- arch/arm/mach-imx/mach-imx51.c | 1 + 8 files changed, 22 insertions(+), 24 deletions(-)
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 13 lines · Shawn Guo
The following changes since commit
9e98c678c2d6ae3a17cb2de55d17f69dddaa231b:Linux 5.1-rc1 (2019-03-17 14:22:26 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.gittags/imx-fixes-5.1for you to fetch changes up to
507aaeeef80d70c46bdf07cda49234b36c2bbdcb:ARM:
imx_v4_v5_defconfig: enable PWM driver (2019-03-22 09:56:11 +0800)
Quoted 16 lines
----------------------------------------------------------------
i.MX fixes for 5.1:
- Correct phy mode setting of imx6dl-yapp4 board to fix a problem caused by commit5ecdd77c61c8("net: dsa: qca8k: disable delay for RGMII mode").
- Add a missingof_node_putcall to fix leaked reference detected by coccinelle in imx51 machine code.
- Fix imx6q cpuidle driver bug which causes that CPU might not wake up at expected time.
- Increase reset duration of Ethernet phy Micrel KSZ9031RNX to fix transmission timeouts error seen on imx6qdl-phytec-pfla02 board.
- Correct SPDX License Identifier style forimx6ull-pinfunc-snvs.h.
- Fix 'bus-witdh' typos inimx6qdl-icore-rqs.dtsi.
- Correct pseudo PHY address of switch device for imx6dl-yapp4 board.
- Update PWM driver options in imx defconfig files due to the change on driver part.
Pulled into arm/fixes, thanks!
Arnd
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel