tests/kms_color: Fix CRC mismatch issues with ctm test
PATCH v3 1/1 tests/kms_color: Fix CRC mismatch issues with ctm test
Due to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of gamma/degamma.
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
--- tests/kms_color.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
tests/kms_color.c +14 -2
@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);
@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid)); +/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); }
Signature · 6 lines
1.9.1 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_color: Fix CRC mismatch issues with ctm test (rev4)
== Series Details ==
== Series Details ==
Series: tests/kms_color: Fix CRC mismatch issues with ctm test (rev4)
URL : https://patchwork.freedesktop.org/series/58412/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5808 -> IGTPW_2698
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_2698 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2698, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/58412/revisions/4/mbox/
Changes
-------
No changes found
Participating hosts (36 -> 5)
------------------------------
ERROR: It appears as if the changes made in IGTPW_2698 prevented too many machines from booting.
Missing (31): fi-skl-6770hq fi-bdw-gvtdvm fi-snb-2520m fi-apl-guc fi-bxt-j4205 fi-icl-u3 fi-pnv-d510 fi-skl-lmem fi-blb-e6850 fi-byt-n2820 fi-skl-6600u fi-hsw-4770r fi-bxt-dsi fi-bwr-2160 fi-ilk-650 fi-kbl-7500u fi-hsw-4770 fi-ivb-3770 fi-skl-6700k2 fi-kbl-7567u fi-ilk-m540 fi-skl-gvtdvm fi-skl-guc fi-cfl-8700k fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-whl-u fi-cfl-8109u fi-skl-iommu fi-kbl-8809g
Build changes
-------------
* IGT: IGT_4902 -> IGTPW_2698
CI_DRM_5808: 0053882c75f979b475f4d543c4b14cbbed218f38 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2698: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2698/
IGT_4902: 3d325bb211d8cd84c6862c9945185a937395cb44 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2698/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✗ Fi.CI.BAT: failure for tests/kms_color: Fix CRC mismatch issues with ctm test (rev5)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: tests/kms_color: Fix CRC mismatch issues with ctm test (rev5)
URL : https://patchwork.freedesktop.org/series/58412/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5811 -> IGTPW_2701
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with IGTPW_2701 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2701, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/58412/revisions/5/mbox/
Known issues
------------
Here are the changes found in IGTPW_2701 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_store@basic-bsd2:
- fi-hsw-4770: NOTRUN -> SKIP [fdo#109271] +41
* igt@i915_selftest@live_hangcheck:
- fi-skl-iommu: NOTRUN -> INCOMPLETE [fdo#108602] / [fdo#108744]
* igt@kms_busy@basic-flip-c:
- fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chamelium@dp-edid-read:
- fi-blb-e6850: NOTRUN -> SKIP [fdo#109271] +76
* igt@kms_psr@primary_mmap_gtt:
- fi-cfl-guc: NOTRUN -> SKIP [fdo#109271] +49
* igt@kms_psr@sprite_plane_onoff:
- fi-skl-iommu: NOTRUN -> SKIP [fdo#109271] +45
* igt@runner@aborted:
- fi-skl-iommu: NOTRUN -> FAIL [fdo#104108] / [fdo#108602]
[fdo#104108]: https://bugs.freedesktop.org/show_bug.cgi?id=104108
[fdo#108602]: https://bugs.freedesktop.org/show_bug.cgi?id=108602
[fdo#108744]: https://bugs.freedesktop.org/show_bug.cgi?id=108744
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
Participating hosts (18 -> 8)
------------------------------
ERROR: It appears as if the changes made in IGTPW_2701 prevented too many machines from booting.
Additional (4): fi-hsw-4770 fi-blb-e6850 fi-cfl-guc fi-skl-iommu
Missing (14): fi-ilk-m540 fi-skl-gvtdvm fi-skl-guc fi-bdw-gvtdvm fi-cfl-8700k fi-kbl-guc fi-whl-u fi-bxt-j4205 fi-cfl-8109u fi-elk-e7500 fi-kbl-8809g fi-skl-lmem fi-byt-n2820 fi-skl-6700k2
Build changes
-------------
* IGT: IGT_4902 -> IGTPW_2701
CI_DRM_5811: efeb64571b430e74fa6b755fd279b9a991538b9d @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2701: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2701/
IGT_4902: 3d325bb211d8cd84c6862c9945185a937395cb44 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2701/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for tests/kms_color: Fix CRC mismatch issues with ctm test (rev6)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: tests/kms_color: Fix CRC mismatch issues with ctm test (rev6)
URL : https://patchwork.freedesktop.org/series/58412/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5813 -> IGTPW_2707
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/58412/revisions/6/mbox/
Known issues
------------
Here are the changes found in IGTPW_2707 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@userptr:
- fi-whl-u: NOTRUN -> SKIP [fdo#109271] +41
* igt@gem_exec_basic@readonly-bsd2:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] +76
* igt@i915_selftest@live_uncore:
- fi-ivb-3770: PASS -> DMESG-FAIL [fdo#110210]
* igt@kms_busy@basic-flip-c:
- fi-pnv-d510: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chamelium@dp-edid-read:
- fi-skl-iommu: NOTRUN -> SKIP [fdo#109271] +45
* igt@kms_chamelium@vga-edid-read:
- fi-skl-6600u: NOTRUN -> SKIP [fdo#109271] +41
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-whl-u: NOTRUN -> FAIL [fdo#103375] +3
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]
* igt@kms_psr@cursor_plane_move:
- fi-whl-u: NOTRUN -> FAIL [fdo#107383] +3
#### Possible fixes ####
* igt@i915_pm_rpm@module-reload:
- fi-skl-6770hq: FAIL [fdo#108511] -> PASS
* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] / [fdo#109720] -> PASS
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107383]: https://bugs.freedesktop.org/show_bug.cgi?id=107383
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108511]: https://bugs.freedesktop.org/show_bug.cgi?id=108511
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109593]: https://bugs.freedesktop.org/show_bug.cgi?id=109593
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720
[fdo#110210]: https://bugs.freedesktop.org/show_bug.cgi?id=110210
Participating hosts (41 -> 42)
------------------------------
Additional (5): fi-whl-u fi-skl-iommu fi-pnv-d510 fi-icl-dsi fi-skl-6600u
Missing (4): fi-ilk-m540 fi-byt-squawks fi-bdw-samus fi-hsw-4200u
Build changes
-------------
* IGT: IGT_4903 -> IGTPW_2707
CI_DRM_5813: 79df6ae8e7d6fc94965a14e1fa04898954d40316 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2707: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2707/
IGT_4903: a4dc3d0f9ac6abf2a0ca6a4771255cb5dcb3b07b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2707/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 13 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testDue to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of gamma/degamma.
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.
Thanks & Regards,
Uma Shankar
Quoted 40 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
Signed-off-by Uma Shankar <[email protected]>---
tests/kms_color.c| 16 ++++++++++++++--1 file changed, 14 insertions(+), 2 deletions(-)tests/kms_color.c +14
-3@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid)); +/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); } --
Quoted 1 line
1.9.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 13 lines · Uma
Quoted 13 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testDue to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of gamma/degamma.
Quoted 8 lines
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.
I'm confused. Why didn't disabling degamma+gamma work?
Quoted 50 lines
Thanks & Regards,
Uma ShankarQuoted 40 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
Signed-off-by Uma Shankar <[email protected]>---
tests/kms_color.c| 16 ++++++++++++++--1 file changed, 14 insertions(+), 2 deletions(-)tests/kms_color.c +14
-3@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid)); +/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); } --Quoted 1 line
1.9.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 29 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 9 lines · Uma
Quoted 9 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 3 lines
Quoted 3 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of
gamma/degamma.
Quoted 5 lines
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Regards,
Uma Shankar
Quoted 52 lines
Quoted 36 lines
Thanks & Regards,
Uma ShankarQuoted 32 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
Signed-off-by Uma Shankar <[email protected]>---
tests/kms_color.c| 16 ++++++++++++++--1 file changed, 14 insertions(+), 2 deletions(-)tests/kms_color.c index renamed from tests/kms_color.c +0
-0decf3c2..dcc86ad 100644
tests/kms_color.c +9
-2@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid));Quoted 15 lines
Quoted 10 lines
tests/kms_color.c +5
-1+/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); } --1.9.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 3 lines
--
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 31 lines · Uma
Quoted 31 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 9 lines · Uma
Quoted 9 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 3 lines
Quoted 3 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of
gamma/degamma.
Quoted 7 lines
Quoted 6 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Who is turning it back on and why?
Quoted 59 lines
Regards,
Uma ShankarQuoted 55 lines
Quoted 36 lines
Thanks & Regards,
Uma ShankarQuoted 32 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
Signed-off-by Uma Shankar <[email protected]>---
tests/kms_color.c| 16 ++++++++++++++--1 file changed, 14 insertions(+), 2 deletions(-)tests/kms_color.c index renamed from tests/kms_color.c +0
-0decf3c2..dcc86ad 100644
tests/kms_color.c +9
-2@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid));Quoted 15 lines
Quoted 10 lines
tests/kms_color.c +5
-1+/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); } --1.9.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev--
Ville Syrjälä
Intel
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 41 lines · Uma
Quoted 38 lines
Quoted 38 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 10 lines · Uma
Quoted 10 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 4 lines
Quoted 4 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of
gamma/degamma.
Quoted 9 lines
Quoted 6 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values and remains enabled.
Quoted 56 lines
Quoted 56 lines
Regards,
Uma ShankarQuoted 52 lines
Quoted 51 lines
Thanks & Regards,
Uma ShankarQuoted 41 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108147
Signed-off-by Uma Shankar <[email protected]>---
tests/kms_color.c| 16 ++++++++++++++--1 file changed, 14 insertions(+), 2 deletions(-)tests/kms_color.c index renamed from tests/kms_color.c +0
-0decf3c2..dcc86ad 100644
tests/kms_color.c +14
-3@@ -696,8 +696,15 @@ static bool test_pipe_ctm(data_t *data,igt_assert (fb_modeset_id);igt_plane_set_fb (primary, &fb_modeset); -set_degamma (data, primary->pipe, degamma_linear); -set_gamma (data, primary->pipe, gamma_linear); +/* +* Don't program LUT's for max CTM cases as limitation of +* representing 1.0 due to ABI limits causes crc mismatch +*/ +if (memcmp (before, after,sizeof (color_t))) { +set_degamma (data, primary->pipe, degamma_linear); +set_gamma (data, primary->pipe, gamma_linear); + } +disable_ctm (primary->pipe);igt_display_commit (&data->display);@@ -1005,6 +1012,11 @@ run_tests_for_pipe(data_t *data, enum pipe p)* produce with an 8 bits per color framebuffer. */ igt_require (!IS_CHERRYVIEW (data->devid)); +/* Disable and let default luts be applied by kernel */ +disable_degamma (primary->pipe); +disable_gamma (primary->pipe); +igt_display_commit (&data->display); +igt_assert (test_pipe_ctm (data, primary, red_green_blue, full_rgb, ctm)); } --Quoted 1 line
1.9.1
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
--
Ville Syrjälä
Intel--
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 47 lines · Uma
Quoted 47 lines · Uma
Quoted 43 lines
Quoted 33 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 10 lines · Uma
Quoted 10 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 4 lines
Quoted 4 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0 representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant of
gamma/degamma.
Quoted 5 lines
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Quoted 5 lines
Quoted 1 line
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values and remains enabled.
We would disable after https://patchwork.freedesktop.org/series/58137/
Hmm. Looks like one patch missing r-b. I should probably go respin that with Matt's comment added.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 64 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Wednesday, March 27, 2019 5:05 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 48 lines · Uma
Quoted 48 lines · Uma
Quoted 44 lines
Quoted 34 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 10 lines · Uma
Quoted 10 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 5 lines
Quoted 5 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0
representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant ofgamma/degamma.
Quoted 5 lines
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Quoted 5 lines
Quoted 1 line
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values
Quoted 6 lines
and remains enabled.
We would disable after https://patchwork.freedesktop.org/series/58137/
Hmm. Looks like one patch missing r-b. I should probably go respin that with Matt's comment added.
Ok sure, will re-test the patch once your change is merged and update the test. Thanks.
Regards,
Uma Shankar
Quoted 3 lines
--
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 64 lines · Uma
Quoted 64 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Wednesday, March 27, 2019 5:05 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 53 lines · Uma
Quoted 42 lines · Uma
Quoted 39 lines
Quoted 39 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 10 lines · Uma
Quoted 10 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 5 lines
Quoted 5 lines
Due to Gamma/Degamma limitation with precision (lack of exact 1.0
representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant ofgamma/degamma.
Quoted 9 lines
Quoted 6 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result available now.Quoted 7 lines
Quoted 5 lines
Quoted 1 line
I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values
Quoted 8 lines
Quoted 6 lines
and remains enabled.
We would disable after https://patchwork.freedesktop.org/series/58137/
Hmm. Looks like one patch missing r-b. I should probably go respin that with Matt's comment added.
Ok sure, will re-test the patch once your change is merged and update the test. Thanks.
Merged now. Though on GLK the kernel still has to load a linear degamma ramp whenever the csc is used since the two are enabled/disabled by the same bit.
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 85 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Friday, March 29, 2019 1:09 AM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 47 lines · Uma
Quoted 47 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Wednesday, March 27, 2019 5:05 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 34 lines · Uma
Quoted 34 lines · Uma
Quoted 31 lines
Quoted 31 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 10 lines · Uma
Quoted 10 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 6 lines
Quoted 6 lines
Due to Gamma/Degamma limitation with precision (lack of exact
1.0
representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant ofgamma/degamma.
Quoted 1 line
Quoted 1 line
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those scenarios.
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result availablenow.
Quoted 18 lines
Quoted 18 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines
I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Quoted 6 lines
Quoted 1 line
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values
and remains enabled.
We would disable after
https://patchwork.freedesktop.org/series/58137/
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Hmm. Looks like one patch missing r-b. I should probably go respin that with Matt's comment added.
Ok sure, will re-test the patch once your change is merged and update the test.
Thanks.
Merged now. Though on GLK the kernel still has to load a linear degamma ramp whenever the csc is used since the two are enabled/disabled by the same bit.
Thanks Ville. Will re-try the test and get back.
Regards,
Uma Shankar
Quoted 3 lines
--
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Quoted 78 lines
Quoted 44 lines
Quoted 44 lines
Quoted 44 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Wednesday, March 27, 2019 5:05 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 32 lines · Uma
Quoted 32 lines · Uma
Quoted 29 lines
Quoted 29 lines
-----Original Message-----
From: Ville Syrjälä [mailto:[email protected]]
Sent: Tuesday, March 26, 2019 10:16 PM
To: Shankar, Uma <[email protected]>
Cc: [email protected]; Syrjala, Ville <[email protected]>; Lankhorst, Maarten <[email protected]>
Subject: Re: [igt-dev] [v3] tests/kms_color: Fix CRC mismatch issues with ctm testQuoted 16 lines · Uma
Quoted 16 lines
-----Original Message-----
From: Shankar, Uma
Sent: Monday, March 25, 2019 2:11 PM
To: [email protected]
Cc: Shankar, Uma <[email protected]>
Subject: [v3] tests/kms_color: Fix CRC mismatch issues with ctm testDue to Gamma/Degamma limitation with precision (lack of exact
1.0
representation) due to ABI restriction, applying linear gamma affects crc. This patch fixes the same by making ctm tests independant ofQuoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
gamma/degamma.
Quoted 4 lines
Quoted 4 lines
v2: Disable degamma/gamma programming for ctm max test as it leads to crc mimsmatch. Limiting it to this test case alone as other tests need it to be enabled, hence not touching those
scenarios.
Quoted 28 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 2 lines
v3: Fixed a fumble with compilation.
Hi Ville,
Can I keep your RB on this version. We have a clean CI result availablenow.
Quoted 21 lines
Quoted 20 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines
I'm confused. Why didn't disabling degamma+gamma work?
We need to disable degamma/gamma and also make sure we don't set them again with linear values, which was being done currently. Hence, disabled it and later made sure it's kept at that.
Quoted 6 lines
Quoted 1 line
Who is turning it back on and why?
When we call disable from IGT, it passes a NULL LUT. In this case, default linear LUT is getting applied in kernel. I am not sure if we really disable the gamma/degamma fully in driver. It just works with linear values
and remains enabled.
We would disable after
https://patchwork.freedesktop.org/series/58137/Hmm. Looks like one patch missing r-b. I should probably go respin that with Matt's comment added.
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
Ok sure, will re-test the patch once your change is merged and update the test.
Thanks.
Merged now. Though on GLK the kernel still has to load a linear degamma ramp whenever the csc is used since the two are enabled/disabled by the same bit.
Thanks Ville. Will re-try the test and get back.
I have tested and it seems just disabling gamma/degamma is enough after your recent changes. I will update the test and float the next revised version.
Quoted 10 lines
Regards,
Uma ShankarQuoted 3 lines
--
Ville Syrjälä
Intel_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for tests/kms_color: Fix CRC mismatch issues with ctm test (rev6)
In reply to Uma Shankar== Series Details ==
== Series Details ==
Series: tests/kms_color: Fix CRC mismatch issues with ctm test (rev6)
URL : https://patchwork.freedesktop.org/series/58412/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5813_full -> IGTPW_2707_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/58412/revisions/6/mbox/
Known issues
------------
Here are the changes found in IGTPW_2707_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> FAIL [fdo#108686]
* igt@kms_atomic_transition@plane-all-modeset-transition:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]
- shard-apl: PASS -> INCOMPLETE [fdo#103927] +1
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-kbl: PASS -> DMESG-WARN [fdo#110222] +2
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-snb: PASS -> DMESG-WARN [fdo#110222] +2
- shard-hsw: PASS -> DMESG-WARN [fdo#110222]
* igt@kms_color@pipe-a-degamma:
- shard-apl: PASS -> FAIL [fdo#104782] / [fdo#108145]
* igt@kms_cursor_crc@cursor-64x64-dpms:
- shard-kbl: PASS -> FAIL [fdo#103232]
- shard-apl: PASS -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-64x64-onscreen:
- shard-glk: PASS -> FAIL [fdo#103232]
* igt@kms_flip@2x-flip-vs-panning:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +6
* igt@kms_flip@flip-vs-blocking-wf-vblank:
- shard-hsw: PASS -> INCOMPLETE [fdo#103540] +1
* igt@kms_frontbuffer_tracking@fbcpsr-1p-indfb-fliptrack:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +13
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-d:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_pipe_crc_basic@read-crc-pipe-f:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_rotation_crc@multiplane-rotation:
- shard-kbl: PASS -> FAIL [fdo#109016]
* igt@kms_vblank@pipe-b-ts-continuation-dpms-rpm:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_vblank@pipe-c-ts-continuation-modeset-hang:
- shard-apl: PASS -> FAIL [fdo#104894]
- shard-kbl: PASS -> FAIL [fdo#104894]
* igt@perf_pmu@busy-accuracy-98-rcs0:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +44
#### Possible fixes ####
* igt@kms_busy@extended-modeset-hang-newfb-render-b:
- shard-hsw: DMESG-WARN [fdo#110222] -> PASS +1
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#110222] -> PASS +1
- shard-snb: DMESG-WARN [fdo#110222] -> PASS
* igt@kms_color@pipe-c-ctm-max:
- shard-glk: FAIL [fdo#108147] -> PASS +2
* igt@kms_cursor_crc@cursor-64x64-suspend:
- shard-apl: FAIL [fdo#103191] / [fdo#103232] -> PASS
- shard-kbl: FAIL [fdo#103191] / [fdo#103232] -> PASS
* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-glk: FAIL [fdo#102887] / [fdo#105363] -> PASS
* igt@kms_flip@modeset-vs-vblank-race-interruptible:
- shard-glk: FAIL [fdo#103060] -> PASS
* igt@kms_setmode@basic:
- shard-kbl: FAIL [fdo#99912] -> PASS
* igt@kms_vblank@pipe-a-ts-continuation-modeset-rpm:
- shard-apl: FAIL [fdo#104894] -> PASS +1
* igt@tools_test@sysfs_l3_parity:
- shard-hsw: SKIP [fdo#109271] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102887]: https://bugs.freedesktop.org/show_bug.cgi?id=102887
[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#104894]: https://bugs.freedesktop.org/show_bug.cgi?id=104894
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#110222]: https://bugs.freedesktop.org/show_bug.cgi?id=110222
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (10 -> 5)
------------------------------
Missing (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u
Build changes
-------------
* IGT: IGT_4903 -> IGTPW_2707
* Piglit: piglit_4509 -> None
CI_DRM_5813: 79df6ae8e7d6fc94965a14e1fa04898954d40316 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2707: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2707/
IGT_4903: a4dc3d0f9ac6abf2a0ca6a4771255cb5dcb3b07b @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2707/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev