CEC blocks idle on omap4
Hi Hans,
Looks like CONFIG_OMAP4_DSS_HDMI_CEC=y blocks SoC core retention idle on omap4 if selected.
Should we maybe move hdmi4_cec_init() to hdmi_display_enable() and hdmi4_cec_uninit() to hdmi_display_disable()?
Or add some enable/disable calls in addtion to the init and uninit calls that can be called from hdmi_display_enable() and hdmi_display_disable()?
Cheers,
Tony
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Tony,
Quoted 11 lines · Tony Lindgren
Hi Hans,
Looks like
CONFIG_OMAP4_DSS_HDMI_CEC=yblocks SoC core retention idle on omap4 if selected.Should we maybe move
hdmi4_cec_init()tohdmi_display_enable()andhdmi4_cec_uninit()tohdmi_display_disable()?Or add some enable/disable calls in addtion to the init and uninit calls that can be called from
hdmi_display_enable()andhdmi_display_disable()?
For proper HDMI CEC behavior the CEC adapter has to remain active even if the HPD of the display is low. Some displays pull down the HPD when in standby, but CEC can still be used to wake them up.
And we see this more often as regulations for the maximum power consumption of displays are getting more and more strict.
So disabling CEC when the display is disabled is not an option.
Disabling CEC if the source is no longer transmitting isn't a good idea either since the display will typically still send periodic CEC commands to the source that it expects to reply to.
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the CONFIG_OMAP4_DSS_HDMI_CEC description. And perhaps disable it by default?
Regards,
Hans
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Hans,
Quoted 17 lines · Hans Verkuil
Quoted 11 lines · Tony Lindgren
Hi Hans,
Looks like
CONFIG_OMAP4_DSS_HDMI_CEC=yblocks SoC core retention idle on omap4 if selected.Should we maybe move
hdmi4_cec_init()tohdmi_display_enable()andhdmi4_cec_uninit()tohdmi_display_disable()?Or add some enable/disable calls in addtion to the init and uninit calls that can be called from
hdmi_display_enable()andhdmi_display_disable()?For proper HDMI CEC behavior the CEC adapter has to remain active even if the HPD of the display is low. Some displays pull down the HPD when in standby, but CEC can still be used to wake them up.
Quoted 8 lines
And we see this more often as regulations for the maximum power consumption of displays are getting more and more strict.
So disabling CEC when the display is disabled is not an option.
Disabling CEC if the source is no longer transmitting isn't a good idea either since the display will typically still send periodic CEC commands to the source that it expects to reply to.
What's the periodicity of those commands ? Can the system be put to sleep and get woken up when there's CEC activity ?
Quoted 4 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?
This should be controllable by userspace. From a product point of view, it should be possible to put the system in a deep sleep state where CEC isn't available, or in a low sleep state where CEC works as expected.
Signature · 7 lines
Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 23 lines · Laurent Pinchart
Hi Hans,
Quoted 20 lines · Hans Verkuil
Quoted 11 lines · Tony Lindgren
Hi Hans,
Looks like
CONFIG_OMAP4_DSS_HDMI_CEC=yblocks SoC core retention idle on omap4 if selected.Should we maybe move
hdmi4_cec_init()tohdmi_display_enable()andhdmi4_cec_uninit()tohdmi_display_disable()?Or add some enable/disable calls in addtion to the init and uninit calls that can be called from
hdmi_display_enable()andhdmi_display_disable()?For proper HDMI CEC behavior the CEC adapter has to remain active even if the HPD of the display is low. Some displays pull down the HPD when in standby, but CEC can still be used to wake them up.
And we see this more often as regulations for the maximum power consumption of displays are getting more and more strict.
Quoted 8 lines
Quoted 5 lines
So disabling CEC when the display is disabled is not an option.
Disabling CEC if the source is no longer transmitting isn't a good idea either since the display will typically still send periodic CEC commands to the source that it expects to reply to.
What's the periodicity of those commands ? Can the system be put to sleep and get woken up when there's CEC activity ?
You don't control that. The sink can transmit a CEC message at any time and the omap4 CEC adapter has to be active to correctly react.
Quoted 10 lines
Quoted 5 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?This should be controllable by userspace. From a product point of view, it should be possible to put the system in a deep sleep state where CEC isn't available, or in a low sleep state where CEC works as expected.
Userspace can always disable CEC. The hdmi_cec_adap_enable() callback in hdmi4_cec.c is called whenever the CEC adapter is enabled or disabled.
I'm not actually sure why hdmi4_cec_init() would block anything since it just registers the CEC device. It does not enable it until userspace explicitly enables it with e.g. 'cec-ctl --playback'.
hdmi4_cec_init() does configure a CEC clock, but that can be moved to hdmi_cec_adap_enable() if necessary.
Note that I am not sure what is meant with 'SoC core retention idle', so perhaps I just misunderstand the problem.
Regards,
Hans
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 6 lines · Hans Verkuil
Quoted 5 lines · Laurent Pinchart
Quoted 4 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?
Quoted 7 lines
Quoted 4 lines
This should be controllable by userspace. From a product point of view, it should be possible to put the system in a deep sleep state where CEC isn't available, or in a low sleep state where CEC works as expected.
Userspace can always disable CEC. The
hdmi_cec_adap_enable()callback inhdmi4_cec.cis called whenever the CEC adapter is enabled or disabled.
OK
Quoted 6 lines
I'm not actually sure why
hdmi4_cec_init()would block anything since it just registers the CEC device. It does not enable it until userspace explicitly enables it with e.g. 'cec-ctl --playback'.
hdmi4_cec_init()does configure a CEC clock, but that can be moved tohdmi_cec_adap_enable()if necessary.
Hey I'm pretty sure that's the right fix then :)
Quoted 2 lines
Note that I am not sure what is meant with 'SoC core retention idle', so perhaps I just misunderstand the problem.
If certain SoC clocks are busy, the SoC will not enter deeper idle states. The hardware has autoidle type features on omaps.
Regards,
Tony
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 24 lines · Tony Lindgren
Quoted 6 lines · Hans Verkuil
Quoted 5 lines · Laurent Pinchart
Quoted 4 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?Quoted 7 lines
Quoted 4 lines
This should be controllable by userspace. From a product point of view, it should be possible to put the system in a deep sleep state where CEC isn't available, or in a low sleep state where CEC works as expected.
Userspace can always disable CEC. The
hdmi_cec_adap_enable()callback inhdmi4_cec.cis called whenever the CEC adapter is enabled or disabled.OK
Quoted 6 lines
I'm not actually sure why
hdmi4_cec_init()would block anything since it just registers the CEC device. It does not enable it until userspace explicitly enables it with e.g. 'cec-ctl --playback'.
hdmi4_cec_init()does configure a CEC clock, but that can be moved tohdmi_cec_adap_enable()if necessary.
Quoted 7 lines
Hey I'm pretty sure that's the right fix then :)
Quoted 2 lines
Note that I am not sure what is meant with 'SoC core retention idle', so perhaps I just misunderstand the problem.
If certain SoC clocks are busy, the SoC will not enter deeper idle states. The hardware has autoidle type features on omaps.
Can you make a patch? It is very easy to test:
To configure the CEC adapter: cec-ctl --playback
To unconfigure the CEC adapter: cec-ctl --clear
As long as the CEC adapter is unconfigured you should be able to enter the deeper idle states. But not if it is configured.
And if you are moving code anyway, can you fix the typo in the comment? devider -> divider
That hurts my eyes...
Regards,
Hans
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 27 lines · Hans Verkuil
Quoted 26 lines · Tony Lindgren
Quoted 6 lines · Hans Verkuil
Quoted 5 lines · Laurent Pinchart
Quoted 4 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?Quoted 7 lines
Quoted 4 lines
This should be controllable by userspace. From a product point of view, it should be possible to put the system in a deep sleep state where CEC isn't available, or in a low sleep state where CEC works as expected.
Userspace can always disable CEC. The
hdmi_cec_adap_enable()callback inhdmi4_cec.cis called whenever the CEC adapter is enabled or disabled.OK
Quoted 6 lines
I'm not actually sure why
hdmi4_cec_init()would block anything since it just registers the CEC device. It does not enable it until userspace explicitly enables it with e.g. 'cec-ctl --playback'.
hdmi4_cec_init()does configure a CEC clock, but that can be moved tohdmi_cec_adap_enable()if necessary.Hey I'm pretty sure that's the right fix then :)
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Note that I am not sure what is meant with 'SoC core retention idle', so perhaps I just misunderstand the problem.
If certain SoC clocks are busy, the SoC will not enter deeper idle states. The hardware has autoidle type features on omaps.
Can you make a patch? It is very easy to test:
Sure. Hmm then we just clear HDMI_WP_CLK values then for disable too I guess.
Quoted 5 lines
To configure the CEC adapter: cec-ctl --playback
To unconfigure the CEC adapter: cec-ctl --clearAs long as the CEC adapter is unconfigured you should be able to enter the deeper idle states. But not if it is configured.
OK will test tonight.
Quoted 4 lines
And if you are moving code anyway, can you fix the typo in the comment? devider -> divider
That hurts my eyes...
Sure.
Thanks,
Tony
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 11 lines · Hans Verkuil
Hi Tony,
Quoted 8 lines · Tony Lindgren
Hi Hans,
Looks like
CONFIG_OMAP4_DSS_HDMI_CEC=yblocks SoC core retention idle on omap4 if selected.Should we maybe move
hdmi4_cec_init()tohdmi_display_enable()andhdmi4_cec_uninit()tohdmi_display_disable()?
Quoted 7 lines
Quoted 3 lines
Or add some enable/disable calls in addtion to the init and uninit calls that can be called from
hdmi_display_enable()andhdmi_display_disable()?For proper HDMI CEC behavior the CEC adapter has to remain active even if the HPD of the display is low. Some displays pull down the HPD when in standby, but CEC can still be used to wake them up.
OK
Quoted 4 lines
And we see this more often as regulations for the maximum power consumption of displays are getting more and more strict.
So disabling CEC when the display is disabled is not an option.
OK
Quoted 3 lines
Disabling CEC if the source is no longer transmitting isn't a good idea either since the display will typically still send periodic CEC commands to the source that it expects to reply to.
Hmm I wonder if we could test for HPD floating and then disable cec? Then we would know nothing is connected, right?
Quoted 4 lines
The reality is that HDMI CEC and HDMI video are really independent of one another. So I wonder if it isn't better to explain the downsides of enabling CEC for the omap4 in the
CONFIG_OMAP4_DSS_HDMI_CECdescription. And perhaps disable it by default?
From distro kernel point of view we should find some way to disable cec dynamically. Can we maybe do something via /sys or some command line option for cec.ko?
Then if we find a way to check for floating HPD pin or something we could support that too.
Regards,
Tony
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel