Skip to contentSkip to conversation

USB: cp210x: add new device id

PATCH Greg Kroah-Hartman 1 participant 1 message Mar 26, 2019

Subsystems (2)
USB USB serial
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

Lorenz Messtechnik has a device that is controlled by the cp210x driver, so add the device id to the driver. The device id was provided by Silicon-Labs for the devices from this vendor.

Reported-by Uli <[email protected]>
Signed-off-by Greg Kroah-Hartman <[email protected]>
Cc stable <[email protected]>
drivers/usb/serial/cp210x.c +1 -0
index fffe23ab0189..f01cd0ee5621 100644
@@ -80,6 +80,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x804E) }, /* Software Bisque Paramount ME build-in converter */
 	{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
 	{ USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+	{ USB_DEVICE(0x10C4, 0x8056) }, /* Lorenz Messtechnik devices */
 	{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
 	{ USB_DEVICE(0x10C4, 0x806F) }, /* IMS USB to RS422 Converter Cable */
 	{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */