arm64: gic-v3: fix unexpected overwrite of spi/ppi/sgi prio
Subsystems (2)
PATCH 1/1 arm64: gic-v3: fix unexpected overwrite of spi/ppi/sgi prio
The priority config will be restored to the default value in the notifiers of gic suspend. While the arm64 nmi-like interrupt has been implemented by using priority since commit bc3c03ccb464 ("arm64: Enable the support of pseudo-NMIs"), we need to do the save and restore exactly.
--- drivers/irqchip/irq-gic.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
drivers/irqchip/irq-gic.c +19 -3
@@ -79,10 +79,12 @@ struct gic_chip_data {u32 saved_spi_enable[DIV_ROUND_UP (1020 ,32 )];u32 saved_spi_active[DIV_ROUND_UP (1020 ,32 )];u32 saved_spi_conf[DIV_ROUND_UP (1020 ,16 )]; +u32 saved_spi_prio[DIV_ROUND_UP (1020 ,4 )];u32 saved_spi_target[DIV_ROUND_UP (1020 ,4 )];u32 __percpu *saved_ppi_enable;u32 __percpu *saved_ppi_active;u32 __percpu *saved_ppi_conf; +u32 __percpu *saved_ppi_prio;#endif struct irq_domain *domain;unsigned int gic_irqs;
@@ -599,6 +601,10 @@ void gic_dist_save(struct gic_chip_data *gic)for (i =0 ; i <DIV_ROUND_UP (gic_irqs,32 ); i++) gic->saved_spi_active[i] =readl_relaxed (dist_base +GIC_DIST_ACTIVE_SET + i *4 ); + +for (i =0 ; i <DIV_ROUND_UP (gic_irqs,4 ); i++) + gic->saved_spi_prio[i] = +readl_relaxed (dist_base +GIC_DIST_PRI + i *4 ); }/*
@@ -630,7 +636,7 @@ void gic_dist_restore(struct gic_chip_data *gic) dist_base + GIC_DIST_CONFIG + i * 4);for (i =0 ; i <DIV_ROUND_UP (gic_irqs,4 ); i++) -writel_relaxed (GICD_INT_DEF_PRI_X4 , +writel_relaxed (gic->saved_spi_prio[i], dist_base +GIC_DIST_PRI + i *4 );for (i =0 ; i <DIV_ROUND_UP (gic_irqs,4 ); i++)
@@ -682,6 +688,9 @@ void gic_cpu_save(struct gic_chip_data *gic)for (i =0 ; i <DIV_ROUND_UP (32 ,16 ); i++) ptr[i] =readl_relaxed (dist_base +GIC_DIST_CONFIG + i *4 ); + ptr =raw_cpu_ptr (gic->saved_ppi_prio); +for (i =0 ; i <DIV_ROUND_UP (32 ,4 ); i++) + ptr[i] =readl_relaxed (dist_base +GIC_DIST_PRI + i *4 ); }void gic_cpu_restore (struct gic_chip_data *gic)
@@ -718,9 +727,9 @@ void gic_cpu_restore(struct gic_chip_data *gic)for (i =0 ; i <DIV_ROUND_UP (32 ,16 ); i++)writel_relaxed (ptr[i], dist_base +GIC_DIST_CONFIG + i *4 ); + ptr =raw_cpu_ptr (gic->saved_ppi_prio);for (i =0 ; i <DIV_ROUND_UP (32 ,4 ); i++) -writel_relaxed (GICD_INT_DEF_PRI_X4 , - dist_base +GIC_DIST_PRI + i *4 ); +writel_relaxed (ptr[i], dist_base +GIC_DIST_PRI + i *4 );writel_relaxed (GICC_INT_PRI_THRESHOLD , cpu_base +GIC_CPU_PRIMASK );gic_cpu_if_up (gic);
@@ -778,11 +787,18 @@ static int gic_pm_init(struct gic_chip_data *gic)if (WARN_ON (!gic->saved_ppi_conf)) goto free_ppi_active; + gic->saved_ppi_prio =__alloc_percpu (DIV_ROUND_UP (32 ,4 ) *4 , +sizeof (u32)); +if (WARN_ON (!gic->saved_ppi_prio)) + goto free_ppi_prio; +if (gic == &gic_data[0 ])cpu_pm_register_notifier (&gic_notifier_block);return 0 ; +free_ppi_prio: +free_percpu (gic->saved_ppi_conf); free_ppi_active:free_percpu (gic->saved_ppi_active); free_ppi_enable:
Signature · 1 line
2.17.1
Quoted 9 lines · Wei Li
The priority config will be restored to the default value in the notifiers of gic suspend. While the arm64 nmi-like interrupt has been implemented by using priority since commit
bc3c03ccb464("arm64: Enable the support of pseudo-NMIs"), we need to do the save and restore exactly.Signed-off-by Wei Li <[email protected]>--- drivers/irqchip/irq-gic.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
You're complaining about an alleged bug in the GICv3 driver (which is always possible), and yet you're submitting a change to the GICv{1,2} driver, for which we don't support variable priorities.
How does this fix anything? How have you tested this patch? What is the actual problem you're trying to paper over?
Thanks,
M.
Signature · 1 line
Jazz is not dead. It just smells funny...