mfd: Add support for Merrifield Basin Cove PMIC
Subsystems (3)
PATCH v2 1/1 mfd: Add support for Merrifield Basin Cove PMIC
Add an mfd driver for Intel Merrifield Basin Cove PMIC.
Signed-off-by Andy Shevchenko <[email protected]>
---
- corrected name of Power Source detection driver
drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/intel_soc_pmic_mrfld.c | 157 +++++++++++++++++++++++ include/linux/mfd/intel_soc_pmic_mrfld.h | 81 ++++++++++++ 4 files changed, 250 insertions(+) create mode 100644 drivers/mfd/intel_soc_pmic_mrfld.c create mode 100644 include/linux/mfd/intel_soc_pmic_mrfld.h
drivers/mfd/Kconfig +11 -0
@@ -572,6 +572,17 @@ config INTEL_SOC_PMIC_CHTDC_TI Select this option for supporting Dollar Cove (TI version) PMIC device that is found on some Intel Cherry Trail systems. +config INTEL_SOC_PMIC_MRFLD + tristate "Support for Intel Merrifield Basin Cove PMIC" + depends on GPIOLIB + depends on ACPI + depends on INTEL_SCU_IPC + select MFD_CORE + select REGMAP_IRQ + help + Select this option for supporting Basin Cove PMIC device + that is found on Intel Merrifield systems. + config MFD_INTEL_LPSS tristate select COMMON_CLK
drivers/mfd/Makefile +1 -0
@@ -234,6 +234,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC) += intel_soc_pmic_bxtwc.o obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC) += intel_soc_pmic_chtwc.o obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o +obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD) += intel_soc_pmic_mrfld.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
drivers/mfd/intel_soc_pmic_mrfld.c new file +157 -0
157 lines not on this page · raw message
include/linux/mfd/intel_soc_pmic_mrfld.h new file +81 -0
81 lines not on this page · raw message
Signature · 1 line
2.20.1