Enabling PC8+ residency for all GEN9+ platforms v3
v3 cover Enabling PC8+ residency for all GEN9+ platforms v3
This patch series enable PC8+ residency test, earlier these tests were only enabled for Haswell and Broadwell.
I have addressed the below review comment provided by Imre on old series (https://patchwork.freedesktop.org/series/57035/)
1. Made this test future proof to enable for all Gen9+ platform.
2. Added a pc8_needs_screen_off flag to distinguish between HSW/BDW and Gen9+ Platform.
3. Since Gen9 onwards PC8+ residency doesn't require display to be turned off, this patch series tests PC8 residency with all screens on.
Addressed review comment provided by Ram on revision 2 (patch commit log describes the changes).
Tested on Gen9 KBL Platform, unable to test on ICL, because ICL systems at local BA setup are not entering to PC2 itself.
Planning a separate series for a subtest to validate pc8 with multiple pipes usages and all planes enabled with max resolution, to create maximum memory bandwidth scenario.
Anshuman Gupta (2):
tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+ tests/i915/i915_pm_rpm: modeset-pc8-residency-stress
tests/i915/i915_pm_rpm.c | 81 ++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 72 insertions(+), 9 deletions(-)
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v3 1/2 tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+
Enabled has_pc8 global for ICL and Gen9+. Modified PC8+ residency sub-test with all screen enabled.
v2:Fixed the issue of skipped test on HSW.
Improved the code comment for MSR_PKG_CST_CONFIG_CONTROL mask and PC8 bits, it holds good for SKL/ICL and Goldmont microarchitecture. Code readabilty improvement.
v3:Removed the connected_screens global. [Ram]
Removed pc8_needs_screen_off from mode_set_data structure,
made it global, aligning to has_pc8 and has_runtime_pm globals. [Ram] Reuse connector lcoal variable in init_modeset_params_for_all_screen(). [Ram] Addressed Coding guide lines comments. [Ram]
--- tests/i915/i915_pm_rpm.c | 73 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 7 deletions(-)
tests/i915/i915_pm_rpm.c +66 -7
@@ -52,7 +52,7 @@#include "igt_device.h" #define MSR_PKG_CST_CONFIG_CONTROL 0xE2 -/* HSW/BDW: */ +/* HSW/BDW SKL/ICL and Goldmont */ #define PKG_CST_LIMIT_MASK 0xF#define PKG_CST_LIMIT_C8 0x6
@@ -90,7 +90,7 @@ enum plane_type {int drm_fd, msr_fd, pc8_status_fd;int debugfs; -bool has_runtime_pm, has_pc8; +bool has_runtime_pm, has_pc8, pc8_needs_screen_off;struct mode_set_data ms_data;/* Stuff used when creating FBs and mode setting. */
@@ -121,6 +121,7 @@ struct modeset_params {struct modeset_params lpsp_mode_params;struct modeset_params non_lpsp_mode_params;struct modeset_params *default_mode_params; +struct modeset_params *screens_mode_params[MAX_CONNECTORS ];static int8_t *pm_data =NULL ;
@@ -297,6 +298,37 @@ static bool init_modeset_params_for_type(struct mode_set_data *data,return true; } +static void init_modeset_params_for_all_screen (struct mode_set_data *data) +{ +drmModeConnectorPtr connector =NULL ; +drmModeModeInfoPtr mode =NULL ; +int screen =0 ; + +if (!data->res) +return false; + +for (int i =0 ; i < data->res->count_connectors; i++) { + connector = data->connectors[i]; + +if (connector->connection ==DRM_MODE_CONNECTED + && connector->count_modes) { + screens_mode_params[screen] = +malloc (sizeof (struct modeset_params )); + mode = &connector->modes[0 ]; +igt_create_pattern_fb (drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , + &screens_mode_params[screen]->fb); + screens_mode_params[screen]->crtc_id = +kmstest_find_crtc_for_connector (drm_fd, data->res, connector,0 ); + screens_mode_params[screen]->connector_id = connector->connector_id; + screens_mode_params[screen]->mode = mode; + screen++; + } + } + +return ; +} +static void init_modeset_cached_params (struct mode_set_data *data) {bool lpsp, non_lpsp;
@@ -305,6 +337,7 @@ static void init_modeset_cached_params(struct mode_set_data *data) SCREEN_TYPE_LPSP); non_lpsp =init_modeset_params_for_type (data, &non_lpsp_mode_params,SCREEN_TYPE_NON_LPSP ); +init_modeset_params_for_all_screen (data);if (lpsp) default_mode_params = &lpsp_mode_params;
@@ -353,6 +386,22 @@ static bool enable_one_screen_with_type(struct mode_set_data *data,return set_mode_for_params (params); } +static void enable_all_screens (struct mode_set_data *data) +{ +struct modeset_params *params =NULL ; + +/* SKIP if there are no connected screens. */ +igt_require (screens_mode_params[0 ]); + +for (int i =0 ; i <MAX_CONNECTORS ; i++) { + params = screens_mode_params[i]; +if (params) +set_mode_for_params (params); +else +break ; + } +} +static void enable_one_screen (struct mode_set_data *data) {/* SKIP if there are no connected screens. */
@@ -685,8 +734,12 @@ static void setup_pc8(void) { has_pc8 = false; -/* Only Haswell supports the PC8 feature. */ -if (!IS_HASWELL (ms_data.devid) && !IS_BROADWELL (ms_data.devid)) +if (IS_HASWELL (ms_data.devid) ||IS_BROADWELL (ms_data.devid)) + pc8_needs_screen_off = true; +else if (AT_LEAST_GEN (ms_data.devid,9 )) + pc8_needs_screen_off = false; +/* Only Haswell supports the PC8 feature on lesser than GEN9. */ +else return ;/* Make sure our Kernel supports MSR and the module is loaded. */
@@ -808,9 +861,15 @@ static void pc8_residency_subtest(void) "configuration.\n");/* Make sure PC8+ residencies stop! */ -enable_one_screen (&ms_data); -igt_assert_f (!pc8_plus_residency_changed (10 ), -"PC8+ residency didn't stop with screen enabled.\n" ); +if (pc8_needs_screen_off) { +enable_one_screen (&ms_data); +igt_assert_f (!pc8_plus_residency_changed (10 ), +"PC8+ residency didn't stop with screen enabled.\n" ); + }else { +enable_all_screens (&ms_data); +igt_assert_f (pc8_plus_residency_changed (10 ), +"Machine is not reaching PC8+ states with all screen enabled.\n" ); + } }static void modeset_subtest (enum screen_type type,int rounds,int wait_flags)
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/2] tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+
Quoted 23 lines · Anshuman Gupta
Enabled
has_pc8global for ICL and Gen9+. Modified PC8+ residency sub-test with all screen enabled.v2:Fixed the issue of skipped test on HSW.
Improved the code comment forMSR_PKG_CST_CONFIG_CONTROLmask and PC8 bits, it holds good for SKL/ICL and Goldmont microarchitecture. Code readabilty improvement.
v3:Removed theconnected_screensglobal. [Ram]
Removedpc8_needs_screen_offfrommode_set_datastructure,
made it global, aligning tohas_pc8andhas_runtime_pmglobals. [Ram] Reuse connector lcoal variable ininit_modeset_params_for_all_screen(). [Ram] Addressed Coding guide lines comments. [Ram]Signed-off-by Anshuman Gupta <[email protected]>--- tests/i915/i915_pm_rpm.c | 73 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 7 deletions(-)tests/i915/i915_pm_rpm.c +0
-0
tests/i915/i915_pm_rpm.c line 55
Quoted 5 lines
tests/i915/i915_pm_rpm.c +1
-1@@ -52,7 +52,7 @@#include "igt_device.h" #define MSR_PKG_CST_CONFIG_CONTROL 0xE2 -/* HSW/BDW: */ +/* HSW/BDW SKL/ICL and Goldmont */
This is not HSW or BDW. I guess you want to list the platforms on which these bit mask will work. Please update the comment accordingly.
Quoted 21 lines
tests/i915/i915_pm_rpm.c +2
-1#define PKG_CST_LIMIT_MASK 0xF#define PKG_CST_LIMIT_C8 0x6@@ -90,7 +90,7 @@ enum plane_type {int drm_fd, msr_fd, pc8_status_fd;int debugfs; -bool has_runtime_pm, has_pc8; +bool has_runtime_pm, has_pc8, pc8_needs_screen_off;struct mode_set_data ms_data;/* Stuff used when creating FBs and mode setting. */ @@ -121,6 +121,7 @@ struct modeset_params {struct modeset_params lpsp_mode_params;struct modeset_params non_lpsp_mode_params;struct modeset_params *default_mode_params; +struct modeset_params *screens_mode_params[MAX_CONNECTORS ];static int8_t *pm_data =NULL ;
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 301
Quoted 4 lines
tests/i915/i915_pm_rpm.c +1
-0@@ -297,6 +298,37 @@ static bool init_modeset_params_for_type(struct mode_set_data *data,return true; } +static void init_modeset_params_for_all_screen (struct mode_set_data *data)
BTW why do we need to pass the ms_data as a parameter when it is declared in global space? Am I missing something here?
Quoted 9 lines
tests/i915/i915_pm_rpm.c +9
-0+{ +drmModeConnectorPtr connector =NULL ; +drmModeModeInfoPtr mode =NULL ; +int screen =0 ; + +if (!data->res) +return false; + +for (int i =0 ; i < data->res->count_connectors; i++) {
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 320
Quoted 10 lines
tests/i915/i915_pm_rpm.c +10
-0+ connector = data->connectors[i]; + +if (connector->connection ==DRM_MODE_CONNECTED + && connector->count_modes) { + screens_mode_params[screen] = +malloc (sizeof (struct modeset_params )); + mode = &connector->modes[0 ]; +igt_create_pattern_fb (drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , + &screens_mode_params[screen]->fb);
Line length exceeds 80chars. Please wrap it. Applicable for elsewhere too.
Quoted 61 lines
tests/i915/i915_pm_rpm.c +34
-2+ screens_mode_params[screen]->crtc_id = +kmstest_find_crtc_for_connector (drm_fd, data->res, connector,0 ); + screens_mode_params[screen]->connector_id = connector->connector_id; + screens_mode_params[screen]->mode = mode; + screen++; + } + } + +return ; +} +static void init_modeset_cached_params (struct mode_set_data *data) {bool lpsp, non_lpsp;@@ -305,6 +337,7 @@ static void init_modeset_cached_params(struct mode_set_data *data) SCREEN_TYPE_LPSP); non_lpsp =init_modeset_params_for_type (data, &non_lpsp_mode_params,SCREEN_TYPE_NON_LPSP ); +init_modeset_params_for_all_screen (data);if (lpsp) default_mode_params = &lpsp_mode_params;@@ -353,6 +386,22 @@ static bool enable_one_screen_with_type(struct mode_set_data *data,return set_mode_for_params (params); } +static void enable_all_screens (struct mode_set_data *data) +{ +struct modeset_params *params =NULL ; + +/* SKIP if there are no connected screens. */ +igt_require (screens_mode_params[0 ]); + +for (int i =0 ; i <MAX_CONNECTORS ; i++) { + params = screens_mode_params[i]; +if (params) +set_mode_for_params (params); +else +break ; + } +} +static void enable_one_screen (struct mode_set_data *data) {/* SKIP if there are no connected screens. */ @@ -685,8 +734,12 @@ static void setup_pc8(void) { has_pc8 = false; -/* Only Haswell supports the PC8 feature. */ -if (!IS_HASWELL (ms_data.devid) && !IS_BROADWELL (ms_data.devid)) +if (IS_HASWELL (ms_data.devid) ||IS_BROADWELL (ms_data.devid)) + pc8_needs_screen_off = true; +else if (AT_LEAST_GEN (ms_data.devid,9 )) + pc8_needs_screen_off = false; +/* Only Haswell supports the PC8 feature on lesser than GEN9. */ +else return ;/* Make sure our Kernel supports MSR and the module is loaded. */
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 866
Quoted 9 lines
tests/i915/i915_pm_rpm.c +3
-3@@ -808,9 +861,15 @@ static void pc8_residency_subtest(void) "configuration.\n");/* Make sure PC8+ residencies stop! */ -enable_one_screen (&ms_data); -igt_assert_f (!pc8_plus_residency_changed (10 ), -"PC8+ residency didn't stop with screen enabled.\n" ); +if (pc8_needs_screen_off) { +enable_one_screen (&ms_data); + igt_assert_f(!pc8_plus_residency_changed(10),
Could we use a macro for this timeout "10" ?
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 870
Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+ "PC8+ residency didn't stop with screen enabled.\n"); + }else { +enable_all_screens (&ms_data); + igt_assert_f(pc8_plus_residency_changed(10),
macro should be good here.
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 871
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ "Machine is not reaching PC8+ states with all screen enabled.\n");
Please consider to make the log crisp to meet the 80 char limit.
-Ram
Quoted 7 lines
tests/i915/i915_pm_rpm.c +1
-0+ } }static void modeset_subtest (enum screen_type type,int rounds,int wait_flags)Signature · 1 line
2.7.4
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/2] tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+
Quoted 51 lines · Ramalingam C
Quoted 23 lines · Anshuman Gupta
Enabled
has_pc8global for ICL and Gen9+. Modified PC8+ residency sub-test with all screen enabled.v2:Fixed the issue of skipped test on HSW.
Improved the code comment forMSR_PKG_CST_CONFIG_CONTROLmask and PC8 bits, it holds good for SKL/ICL and Goldmont microarchitecture. Code readabilty improvement.
v3:Removed theconnected_screensglobal. [Ram]
Removedpc8_needs_screen_offfrommode_set_datastructure,
made it global, aligning tohas_pc8andhas_runtime_pmglobals. [Ram] Reuse connector lcoal variable ininit_modeset_params_for_all_screen(). [Ram] Addressed Coding guide lines comments. [Ram]Signed-off-by Anshuman Gupta <[email protected]>--- tests/i915/i915_pm_rpm.c | 73 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 7 deletions(-)tests/i915/i915_pm_rpm.c +0
-0tests/i915/i915_pm_rpm.c line 55
Quoted 5 lines
tests/i915/i915_pm_rpm.c +1
-1@@ -52,7 +52,7 @@#include "igt_device.h" #define MSR_PKG_CST_CONFIG_CONTROL 0xE2 -/* HSW/BDW: */ +/* HSW/BDW SKL/ICL and Goldmont */ This is not HSW or BDW. I guess you want to list the platforms on which these bit mask will work. Please update the comment accordingly.
Quoted 20 lines
tests/i915/i915_pm_rpm.c +2
-1#define PKG_CST_LIMIT_MASK 0xF#define PKG_CST_LIMIT_C8 0x6@@ -90,7 +90,7 @@ enum plane_type {int drm_fd, msr_fd, pc8_status_fd;int debugfs; -bool has_runtime_pm, has_pc8; +bool has_runtime_pm, has_pc8, pc8_needs_screen_off;struct mode_set_data ms_data;/* Stuff used when creating FBs and mode setting. */ @@ -121,6 +121,7 @@ struct modeset_params {struct modeset_params lpsp_mode_params;struct modeset_params non_lpsp_mode_params;struct modeset_params *default_mode_params; +struct modeset_params *screens_mode_params[MAX_CONNECTORS ];static int8_t *pm_data =NULL ;
Quoted 7 lines
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 301
Quoted 5 lines
tests/i915/i915_pm_rpm.c +1
-0@@ -297,6 +298,37 @@ static bool init_modeset_params_for_type(struct mode_set_data *data,return true; } +static void init_modeset_params_for_all_screen (struct mode_set_data *data)BTW why do we need to pass the
ms_dataas a parameter when it is declared in global space? Am I missing something here?
I am not sure about it, exisitng code uses this global at so many places.
Quoted 13 lines
Quoted 13 lines
tests/i915/i915_pm_rpm.c +13
-0+{ +drmModeConnectorPtr connector =NULL ; +drmModeModeInfoPtr mode =NULL ; +int screen =0 ; + +if (!data->res) +return false; + +for (int i =0 ; i < data->res->count_connectors; i++) { + connector = data->connectors[i]; + +if (connector->connection ==DRM_MODE_CONNECTED + && connector->count_modes) {
Quoted 8 lines
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 320
Quoted 6 lines
tests/i915/i915_pm_rpm.c +6
-0+ screens_mode_params[screen] = +malloc (sizeof (struct modeset_params )); + mode = &connector->modes[0 ]; +igt_create_pattern_fb (drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , + &screens_mode_params[screen]->fb);Line length exceeds 80chars. Please wrap it. Applicable for elsewhere too.
here it will not be possible, it will not be readable, need to create a separate function and move all these chunk of big lines, hope that will be ok.
Quoted 63 lines
Quoted 63 lines
tests/i915/i915_pm_rpm.c +34
-2+ screens_mode_params[screen]->crtc_id = +kmstest_find_crtc_for_connector (drm_fd, data->res, connector,0 ); + screens_mode_params[screen]->connector_id = connector->connector_id; + screens_mode_params[screen]->mode = mode; + screen++; + } + } + +return ; +} +static void init_modeset_cached_params (struct mode_set_data *data) {bool lpsp, non_lpsp;@@ -305,6 +337,7 @@ static void init_modeset_cached_params(struct mode_set_data *data) SCREEN_TYPE_LPSP); non_lpsp =init_modeset_params_for_type (data, &non_lpsp_mode_params,SCREEN_TYPE_NON_LPSP ); +init_modeset_params_for_all_screen (data);if (lpsp) default_mode_params = &lpsp_mode_params;@@ -353,6 +386,22 @@ static bool enable_one_screen_with_type(struct mode_set_data *data,return set_mode_for_params (params); } +static void enable_all_screens (struct mode_set_data *data) +{ +struct modeset_params *params =NULL ; + +/* SKIP if there are no connected screens. */ +igt_require (screens_mode_params[0 ]); + +for (int i =0 ; i <MAX_CONNECTORS ; i++) { + params = screens_mode_params[i]; +if (params) +set_mode_for_params (params); +else +break ; + } +} +static void enable_one_screen (struct mode_set_data *data) {/* SKIP if there are no connected screens. */ @@ -685,8 +734,12 @@ static void setup_pc8(void) { has_pc8 = false; -/* Only Haswell supports the PC8 feature. */ -if (!IS_HASWELL (ms_data.devid) && !IS_BROADWELL (ms_data.devid)) +if (IS_HASWELL (ms_data.devid) ||IS_BROADWELL (ms_data.devid)) + pc8_needs_screen_off = true; +else if (AT_LEAST_GEN (ms_data.devid,9 )) + pc8_needs_screen_off = false; +/* Only Haswell supports the PC8 feature on lesser than GEN9. */ +else return ;/* Make sure our Kernel supports MSR and the module is loaded. */ @@ -808,9 +861,15 @@ static void pc8_residency_subtest(void) "configuration.\n");
Quoted 8 lines
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 866
Quoted 7 lines
tests/i915/i915_pm_rpm.c +3
-3/* Make sure PC8+ residencies stop! */ -enable_one_screen (&ms_data); -igt_assert_f (!pc8_plus_residency_changed (10 ), -"PC8+ residency didn't stop with screen enabled.\n" ); +if (pc8_needs_screen_off) { +enable_one_screen (&ms_data); + igt_assert_f(!pc8_plus_residency_changed(10),Could we use a macro for this timeout "10" ?
yes we can but there are other existing instances too are using different timeut values, so there will be pleanty of timeout macros.
Quoted 8 lines
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 870
Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+ "PC8+ residency didn't stop with screen enabled.\n"); + }else { +enable_all_screens (&ms_data); + igt_assert_f(pc8_plus_residency_changed(10),macro should be good here.
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 871
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ "Machine is not reaching PC8+ states with all screen enabled.\n");Please consider to make the log crisp to meet the 80 char limit.
Quoted 8 lines
-Ram
Quoted 7 lines
tests/i915/i915_pm_rpm.c +1
-0+ } }static void modeset_subtest (enum screen_type type,int rounds,int wait_flags)Signature · 1 line
2.7.4
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 1/2] tests/i915/i915_pm_rpm: Enable PC8+ residency test for all Gen9+
Quoted 145 lines · Anshuman
Quoted 43 lines · Ramalingam C
Quoted 23 lines · Anshuman Gupta
Enabled
has_pc8global for ICL and Gen9+. Modified PC8+ residency sub-test with all screen enabled.v2:Fixed the issue of skipped test on HSW.
Improved the code comment forMSR_PKG_CST_CONFIG_CONTROLmask and PC8 bits, it holds good for SKL/ICL and Goldmont microarchitecture. Code readabilty improvement.
v3:Removed theconnected_screensglobal. [Ram]
Removedpc8_needs_screen_offfrommode_set_datastructure,
made it global, aligning tohas_pc8andhas_runtime_pmglobals. [Ram] Reuse connector lcoal variable ininit_modeset_params_for_all_screen(). [Ram] Addressed Coding guide lines comments. [Ram]Signed-off-by Anshuman Gupta <[email protected]>--- tests/i915/i915_pm_rpm.c | 73 +++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 66 insertions(+), 7 deletions(-)tests/i915/i915_pm_rpm.c +0
-0tests/i915/i915_pm_rpm.c line 54
Quoted 4 lines
tests/i915/i915_pm_rpm.c +1
-1@@ -52,7 +52,7 @@#include "igt_device.h" #define MSR_PKG_CST_CONFIG_CONTROL 0xE2 -/* HSW/BDW: */ +/* HSW/BDW SKL/ICL and Goldmont */ This is not HSW or BDW. I guess you want to list the platforms on which these bit mask will work. Please update the comment accordingly.
Quoted 13 lines
tests/i915/i915_pm_rpm.c +1
-1#define PKG_CST_LIMIT_MASK 0xF#define PKG_CST_LIMIT_C8 0x6@@ -90,7 +90,7 @@ enum plane_type {int drm_fd, msr_fd, pc8_status_fd;int debugfs; -bool has_runtime_pm, has_pc8; +bool has_runtime_pm, has_pc8, pc8_needs_screen_off;struct mode_set_data ms_data;/* Stuff used when creating FBs and mode setting. */ @@ -121,6 +121,7 @@ struct modeset_params {struct modeset_params lpsp_mode_params;struct modeset_params non_lpsp_mode_params;struct modeset_params *default_mode_params;Quoted 8 lines
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 300
Quoted 6 lines
tests/i915/i915_pm_rpm.c +2
-0+struct modeset_params *screens_mode_params[MAX_CONNECTORS ];static int8_t *pm_data =NULL ;@@ -297,6 +298,37 @@ static bool init_modeset_params_for_type(struct mode_set_data *data,return true; } +static void init_modeset_params_for_all_screen (struct mode_set_data *data)BTW why do we need to pass the
ms_dataas a parameter when it is declared in global space? Am I missing something here?I am not sure about it, exisitng code uses this global at so many places.
Quoted 13 lines
Quoted 13 lines
tests/i915/i915_pm_rpm.c +13
-0+{ +drmModeConnectorPtr connector =NULL ; +drmModeModeInfoPtr mode =NULL ; +int screen =0 ; + +if (!data->res) +return false; + +for (int i =0 ; i < data->res->count_connectors; i++) { + connector = data->connectors[i]; + +if (connector->connection ==DRM_MODE_CONNECTED + && connector->count_modes) {Quoted 8 lines
tests/i915/i915_pm_rpm.c static bool init_modeset_params_for_type(struct mode_set_data *data, · line 320
Quoted 6 lines
tests/i915/i915_pm_rpm.c +6
-0+ screens_mode_params[screen] = +malloc (sizeof (struct modeset_params )); + mode = &connector->modes[0 ]; +igt_create_pattern_fb (drm_fd, mode->hdisplay, mode->vdisplay, +DRM_FORMAT_XRGB8888 ,LOCAL_DRM_FORMAT_MOD_NONE , + &screens_mode_params[screen]->fb);Line length exceeds 80chars. Please wrap it. Applicable for elsewhere too.
here it will not be possible, it will not be readable, need to create a separate function and move all these chunk of big lines, hope that will be ok.
Quoted 58 lines
Quoted 58 lines
tests/i915/i915_pm_rpm.c +34
-2+ screens_mode_params[screen]->crtc_id = +kmstest_find_crtc_for_connector (drm_fd, data->res, connector,0 ); + screens_mode_params[screen]->connector_id = connector->connector_id; + screens_mode_params[screen]->mode = mode; + screen++; + } + } + +return ; +} +static void init_modeset_cached_params (struct mode_set_data *data) {bool lpsp, non_lpsp;@@ -305,6 +337,7 @@ static void init_modeset_cached_params(struct mode_set_data *data) SCREEN_TYPE_LPSP); non_lpsp =init_modeset_params_for_type (data, &non_lpsp_mode_params,SCREEN_TYPE_NON_LPSP ); +init_modeset_params_for_all_screen (data);if (lpsp) default_mode_params = &lpsp_mode_params;@@ -353,6 +386,22 @@ static bool enable_one_screen_with_type(struct mode_set_data *data,return set_mode_for_params (params); } +static void enable_all_screens (struct mode_set_data *data) +{ +struct modeset_params *params =NULL ; + +/* SKIP if there are no connected screens. */ +igt_require (screens_mode_params[0 ]); + +for (int i =0 ; i <MAX_CONNECTORS ; i++) { + params = screens_mode_params[i]; +if (params) +set_mode_for_params (params); +else +break ; + } +} +static void enable_one_screen (struct mode_set_data *data) {/* SKIP if there are no connected screens. */ @@ -685,8 +734,12 @@ static void setup_pc8(void) { has_pc8 = false; -/* Only Haswell supports the PC8 feature. */ -if (!IS_HASWELL (ms_data.devid) && !IS_BROADWELL (ms_data.devid)) +if (IS_HASWELL (ms_data.devid) ||IS_BROADWELL (ms_data.devid)) + pc8_needs_screen_off = true; +else if (AT_LEAST_GEN (ms_data.devid,9 )) + pc8_needs_screen_off = false; +/* Only Haswell supports the PC8 feature on lesser than GEN9. */ +else return ;/* Make sure our Kernel supports MSR and the module is loaded. */ @@ -808,9 +861,15 @@ static void pc8_residency_subtest(void) "configuration.\n");Quoted 8 lines
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 866
Quoted 7 lines
tests/i915/i915_pm_rpm.c +3
-3/* Make sure PC8+ residencies stop! */ -enable_one_screen (&ms_data); -igt_assert_f (!pc8_plus_residency_changed (10 ), -"PC8+ residency didn't stop with screen enabled.\n" ); +if (pc8_needs_screen_off) { +enable_one_screen (&ms_data); + igt_assert_f(!pc8_plus_residency_changed(10),Could we use a macro for this timeout "10" ?
Quoted 3 lines
yes we can but there are other existing instances too are using different timeut values, so there will be pleanty of timeout
macros.
We need to worry about what we add here. If you are thinking existing code can be improvised, feel free to do that in separate patch.
-Ram
Quoted 8 lines
Quoted 8 lines
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 870
Quoted 4 lines
tests/i915/i915_pm_rpm.c +4
-0+ "PC8+ residency didn't stop with screen enabled.\n"); + }else { +enable_all_screens (&ms_data); + igt_assert_f(pc8_plus_residency_changed(10),macro should be good here.
tests/i915/i915_pm_rpm.c static void pc8_residency_subtest(void) · line 871
Quoted 1 line
tests/i915/i915_pm_rpm.c +1
-0+ "Machine is not reaching PC8+ states with all screen enabled.\n");Please consider to make the log crisp to meet the 80 char limit.
Quoted 7 lines
Quoted 7 lines
-Ram
Quoted 6 lines
tests/i915/i915_pm_rpm.c +1
-0+ } }static void modeset_subtest (enum screen_type type,int rounds,int wait_flags)Signature · 1 line
2.7.4
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
PATCH v3 2/2 tests/i915/i915_pm_rpm: modeset-pc8-residency-stress
In reply to Anshuman GuptaIntroduced pc8_needs_screen_off flag in order to differentiate between HASWELL/BROADWELL and AT_LEAST_GEN9. GEN9 onwards PC8+ residency does't require display to be turned on.
v3:Removed pc8_needs_screen_off from mode_set_data structure,
made it global, aligning to has_pc8 and has_runtime_pm globals. [Ram] Made modeset_subtest() to tests PC8+ residency after enabling a screen, earlier it expects PC8+ residency to stop on HSW/BDW.
--- tests/i915/i915_pm_rpm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
tests/i915/i915_pm_rpm.c +6 -2
@@ -900,8 +900,12 @@ static void modeset_subtest(enum screen_type type, int rounds, int wait_flags)igt_require (enable_one_screen_with_type (&ms_data, type));if (wait_flags &WAIT_STATUS )igt_assert (wait_for_active ()); -if (wait_flags &WAIT_PC8_RES ) -igt_assert (!pc8_plus_residency_changed (5 )); +if (wait_flags &WAIT_PC8_RES && pc8_needs_screen_off) +if (pc8_needs_screen_off) +igt_assert (!pc8_plus_residency_changed (5 )); +else +igt_assert (pc8_plus_residency_changed (5 )); +if (wait_flags &WAIT_EXTRA )sleep (5 ); }
Signature · 6 lines
2.7.4 _______________________________________________ igt-dev mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/igt-dev
Re: [igt-dev] [PATCH i-g-t v3 2/2] tests/i915/i915_pm_rpm: modeset-pc8-residency-stress
Quoted 19 lines · Anshuman Gupta
Introduced
pc8_needs_screen_offflag in order to differentiate between HASWELL/BROADWELL andAT_LEAST_GEN9. GEN9 onwards PC8+ residency does't require display to be turned on.v3:Removed
pc8_needs_screen_offfrommode_set_datastructure,
made it global, aligning tohas_pc8andhas_runtime_pmglobals. [Ram] Mademodeset_subtest()to tests PC8+ residency after enabling a screen, earlier it expects PC8+ residency to stop on HSW/BDW.Signed-off-by Anshuman Gupta <[email protected]>--- tests/i915/i915_pm_rpm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)tests/i915/i915_pm_rpm.c +0
-0
tests/i915/i915_pm_rpm.c static void modeset_subtest(enum screen_type type, int rounds, int wait_flags) · line 903
Quoted 6 lines
tests/i915/i915_pm_rpm.c +1
-2@@ -900,8 +900,12 @@ static void modeset_subtest(enum screen_type type, int rounds, int wait_flags)igt_require (enable_one_screen_with_type (&ms_data, type));if (wait_flags &WAIT_STATUS )igt_assert (wait_for_active ()); -if (wait_flags &WAIT_PC8_RES ) -igt_assert (!pc8_plus_residency_changed (5 )); +if (wait_flags &WAIT_PC8_RES && pc8_needs_screen_off)
with assertion for pc8_needs_screen_off here, we will never hit below else!!.
-Ram
Quoted 11 lines
tests/i915/i915_pm_rpm.c +5
-0+if (pc8_needs_screen_off) +igt_assert (!pc8_plus_residency_changed (5 )); +else +igt_assert (pc8_plus_residency_changed (5 )); +if (wait_flags &WAIT_EXTRA )sleep (5 ); }Signature · 1 line
2.7.4
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.BAT: success for Enabling PC8+ residency for all GEN9+ platforms (rev3)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: Enabling PC8+ residency for all GEN9+ platforms (rev3)
URL : https://patchwork.freedesktop.org/series/57640/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5823 -> IGTPW_2717
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57640/revisions/3/mbox/
Known issues
------------
Here are the changes found in IGTPW_2717 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_cs_nop@fork-gfx0:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109315] +17
* igt@gem_exec_basic@readonly-bsd1:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109276] +7
* igt@gem_exec_parse@basic-allowed:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109289] +1
* igt@i915_selftest@live_contexts:
- fi-icl-u2: NOTRUN -> DMESG-FAIL [fdo#108569]
- fi-bdw-gvtdvm: PASS -> DMESG-FAIL [fdo#110235 ]
* igt@i915_selftest@live_execlists:
- fi-apl-guc: PASS -> INCOMPLETE [fdo#103927] / [fdo#109720]
* igt@kms_chamelium@dp-edid-read:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109316] +2
* igt@kms_chamelium@vga-hpd-fast:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109309] +1
* igt@kms_force_connector_basic@prune-stale-modes:
- fi-icl-u2: NOTRUN -> SKIP [fdo#109285] +3
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#107362]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-byt-clapper: PASS -> FAIL [fdo#103191] / [fdo#107362]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- fi-blb-e6850: NOTRUN -> INCOMPLETE [fdo#107718]
* igt@runner@aborted:
- fi-apl-guc: NOTRUN -> FAIL [fdo#108622] / [fdo#109720]
#### Possible fixes ####
* igt@gem_ctx_create@basic-files:
- fi-icl-u2: INCOMPLETE [fdo#109100] -> PASS
* igt@i915_selftest@live_contexts:
- fi-skl-gvtdvm: DMESG-FAIL [fdo#110235 ] -> PASS
* igt@i915_selftest@live_evict:
- fi-bsw-kefka: DMESG-WARN [fdo#107709] -> PASS
* igt@kms_busy@basic-flip-a:
- fi-gdg-551: FAIL [fdo#103182] -> PASS
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-blb-e6850: INCOMPLETE [fdo#107718] -> PASS
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107709]: https://bugs.freedesktop.org/show_bug.cgi?id=107709
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108622]: https://bugs.freedesktop.org/show_bug.cgi?id=108622
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109309]: https://bugs.freedesktop.org/show_bug.cgi?id=109309
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109316]: https://bugs.freedesktop.org/show_bug.cgi?id=109316
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720
[fdo#110235 ]: https://bugs.freedesktop.org/show_bug.cgi?id=110235
Participating hosts (43 -> 35)
------------------------------
Missing (8): fi-kbl-soraka fi-ilk-m540 fi-hsw-4200u fi-hsw-peppy fi-byt-squawks fi-bsw-cyan fi-ivb-3770 fi-bdw-samus
Build changes
-------------
* IGT: IGT_4907 -> IGTPW_2717
CI_DRM_5823: f346d92211072f89a64f917d3b61cb8177a6fe4b @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2717: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2717/
IGT_4907: 7c8f2616fa0fd3ddb16e050c5b7ea9ce707abbe4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2717/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Patchwork
CI[igt-dev] ✓ Fi.CI.IGT: success for Enabling PC8+ residency for all GEN9+ platforms (rev3)
In reply to Anshuman Gupta== Series Details ==
== Series Details ==
Series: Enabling PC8+ residency for all GEN9+ platforms (rev3)
URL : https://patchwork.freedesktop.org/series/57640/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5823_full -> IGTPW_2717_full
====================================================
Summary
-------
**WARNING**
Minor unknown changes coming with IGTPW_2717_full need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in IGTPW_2717_full, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57640/revisions/3/mbox/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in IGTPW_2717_full:
### IGT changes ###
#### Warnings ####
* igt@i915_pm_rpm@modeset-pc8-residency-stress:
- shard-kbl: SKIP [fdo#109271] -> FAIL +2
* igt@i915_pm_rpm@pc8-residency:
- shard-apl: SKIP [fdo#109271] -> FAIL +1
Known issues
------------
Here are the changes found in IGTPW_2717_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_exec_capture@capture-bsd2:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +88
* igt@gem_exec_schedule@in-order-bsd2:
- shard-glk: NOTRUN -> SKIP [fdo#109271] +14
* igt@gem_tiled_swapping@non-threaded:
- shard-hsw: PASS -> FAIL [fdo#108686]
* igt@i915_pm_rpm@gem-execbuf-stress-pc8:
- shard-hsw: NOTRUN -> SKIP [fdo#109271] +18
* igt@i915_pm_rps@waitboost:
- shard-apl: PASS -> FAIL [fdo#102250]
* igt@kms_atomic_transition@4x-modeset-transitions-nonblocking:
- shard-hsw: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_busy@extended-modeset-hang-oldfb-render-f:
- shard-glk: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_busy@extended-modeset-hang-oldfb-with-reset-render-d:
- shard-apl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_chv_cursor_fail@pipe-c-64x64-left-edge:
- shard-glk: PASS -> INCOMPLETE [fdo#103359] / [k.org#198133]
* igt@kms_content_protection@atomic:
- shard-kbl: NOTRUN -> FAIL [fdo#108597] / [fdo#108739]
* igt@kms_cursor_crc@cursor-128x42-onscreen:
- shard-glk: NOTRUN -> FAIL [fdo#103232] +1
* igt@kms_cursor_crc@cursor-256x256-dpms:
- shard-glk: PASS -> FAIL [fdo#103232]
* igt@kms_cursor_legacy@2x-long-flip-vs-cursor-legacy:
- shard-glk: PASS -> FAIL [fdo#104873]
* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: PASS -> FAIL [fdo#105363] +1
* igt@kms_frontbuffer_tracking@fbcpsr-stridechange:
- shard-apl: NOTRUN -> SKIP [fdo#109271] +22
* igt@kms_frontbuffer_tracking@psr-2p-primscrn-spr-indfb-fullscreen:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +22
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-e:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +6
* igt@kms_pipe_crc_basic@read-crc-pipe-d:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_plane_alpha_blend@pipe-c-alpha-basic:
- shard-apl: NOTRUN -> FAIL [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
- shard-apl: PASS -> FAIL [fdo#108145]
* igt@kms_plane_scaling@pipe-b-scaler-with-rotation:
- shard-glk: PASS -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_rotation_crc@multiplane-rotation:
- shard-kbl: PASS -> FAIL [fdo#109016]
* igt@kms_rotation_crc@multiplane-rotation-cropping-bottom:
- shard-kbl: PASS -> DMESG-FAIL [fdo#105763]
* igt@kms_setmode@basic:
- shard-hsw: PASS -> FAIL [fdo#99912]
- shard-kbl: NOTRUN -> FAIL [fdo#99912]
* igt@testdisplay:
- shard-kbl: PASS -> INCOMPLETE [fdo#103665]
- shard-apl: PASS -> INCOMPLETE [fdo#103927]
#### Possible fixes ####
* igt@gem_create@create-clear:
- shard-snb: INCOMPLETE [fdo#105411] -> PASS
* igt@kms_atomic_transition@1x-modeset-transitions-nonblocking-fencing:
- shard-apl: FAIL [fdo#109660] -> PASS
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-a:
- shard-hsw: DMESG-WARN [fdo#110222] -> PASS +1
* igt@kms_busy@extended-modeset-hang-newfb-with-reset-render-b:
- shard-kbl: DMESG-WARN [fdo#110222] -> PASS +1
- shard-snb: DMESG-WARN [fdo#110222] -> PASS
* igt@kms_cursor_legacy@flip-vs-cursor-legacy:
- shard-glk: FAIL [fdo#102670] -> PASS
* igt@kms_flip@dpms-vs-vblank-race-interruptible:
- shard-glk: FAIL [fdo#103060] -> PASS
* {igt@kms_plane@pixel-format-pipe-a-planes-source-clamping}:
- shard-glk: SKIP [fdo#109271] -> PASS
* igt@kms_plane@plane-position-hole-dpms-pipe-b-planes:
- shard-snb: SKIP [fdo#109271] -> PASS +1
* igt@kms_plane_alpha_blend@pipe-a-constant-alpha-max:
- shard-glk: FAIL [fdo#108145] -> PASS
* igt@kms_plane_scaling@pipe-a-scaler-with-pixel-format:
- shard-glk: SKIP [fdo#109271] / [fdo#109278] -> PASS
* igt@kms_vblank@pipe-a-query-idle-hang:
- shard-hsw: INCOMPLETE [fdo#103540] -> PASS
* igt@tools_test@tools_test:
- shard-apl: SKIP [fdo#109271] -> PASS
#### Warnings ####
* igt@kms_busy@extended-modeset-hang-newfb-render-a:
- shard-snb: SKIP [fdo#109271] / [fdo#109278] -> DMESG-WARN [fdo#110222]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102250]: https://bugs.freedesktop.org/show_bug.cgi?id=102250
[fdo#102670]: https://bugs.freedesktop.org/show_bug.cgi?id=102670
[fdo#103060]: https://bugs.freedesktop.org/show_bug.cgi?id=103060
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#104873]: https://bugs.freedesktop.org/show_bug.cgi?id=104873
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105763]: https://bugs.freedesktop.org/show_bug.cgi?id=105763
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108597]: https://bugs.freedesktop.org/show_bug.cgi?id=108597
[fdo#108686]: https://bugs.freedesktop.org/show_bug.cgi?id=108686
[fdo#108739]: https://bugs.freedesktop.org/show_bug.cgi?id=108739
[fdo#109016]: https://bugs.freedesktop.org/show_bug.cgi?id=109016
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109660]: https://bugs.freedesktop.org/show_bug.cgi?id=109660
[fdo#110222]: https://bugs.freedesktop.org/show_bug.cgi?id=110222
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (10 -> 5)
------------------------------
Missing (5): shard-skl pig-hsw-4770r pig-glk-j5005 shard-iclb pig-skl-6260u
Build changes
-------------
* IGT: IGT_4907 -> IGTPW_2717
* Piglit: piglit_4509 -> None
CI_DRM_5823: f346d92211072f89a64f917d3b61cb8177a6fe4b @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_2717: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2717/
IGT_4907: 7c8f2616fa0fd3ddb16e050c5b7ea9ce707abbe4 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_2717/
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev