Skip to contentSkip to conversation

fsstress: rename setxattr operation to chproj

PATCH In review [email protected] 2 participants 2 messages Mar 28, 2019 Btrfs file system

lore
Share & tools
lore
#0 lore raw

PATCH 1/7 fsstress: rename setxattr operation to chproj

From: Filipe Manana <[email protected]>

The existing setxattr operation is used to change the project identifier attribute associated with an inode, and not about setting a xattr (the name and value pair) for a file/directory, which is confusing. So rename the operation to chproj, which is more descriptive about what it does and avoids any confusion.

Fsstress currently has no operations for setting and getting xattrs of a file (for any namespace), and this patch is a preparation for adding such operations in a subsequent patch.

This operation actually used to be named chproj until the following commit:

commit 6449a993f2dfb3faaaa44e29d2f7d1bb7c5db9ba
Author: Nathan Scott <[email protected]>
Date: Mon Dec 5 21:41:47 2005 +0000

Switch to always using get/setxattr rather than a separate projid call on IRIX. Merge of master-melb:xfs-cmds:24692a by kenmcd.

Which does not explain the rationale for the renaming at all.

---
 ltp/fsstress.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
ltp/fsstress.c +5 -5
index 2223fd7d..cc4f520e 100644
@@ -55,6 +55,7 @@ typedef enum {
 	OP_BULKSTAT,
 	OP_BULKSTAT1,
 	OP_CHOWN,
+	OP_CHPROJ,
 	OP_CLONERANGE,
 	OP_COPYRANGE,
 	OP_CREAT,
@@ -84,7 +85,6 @@ typedef enum {
 	OP_RESVSP,
 	OP_RMDIR,
 	OP_SETATTR,
-	OP_SETXATTR,
 	OP_SPLICE,
 	OP_STAT,
 	OP_SYMLINK,
@@ -165,6 +165,7 @@ void	awrite_f(int, long);
 void	bulkstat_f(int, long);
 void	bulkstat1_f(int, long);
 void	chown_f(int, long);
+void	chproj_f(int, long);
 void	clonerange_f(int, long);
 void	copyrange_f(int, long);
 void	creat_f(int, long);
@@ -194,7 +195,6 @@ void	rename_f(int, long);
 void	resvsp_f(int, long);
 void	rmdir_f(int, long);
 void	setattr_f(int, long);
-void	setxattr_f(int, long);
 void	splice_f(int, long);
 void	stat_f(int, long);
 void	symlink_f(int, long);
@@ -216,6 +216,7 @@ opdesc_t	ops[] = {
 	{ OP_BULKSTAT, "bulkstat", bulkstat_f, 1, 0 },
 	{ OP_BULKSTAT1, "bulkstat1", bulkstat1_f, 1, 0 },
 	{ OP_CHOWN, "chown", chown_f, 3, 1 },
+	{ OP_CHPROJ, "chproj", chproj_f, 1, 1 },
 	{ OP_CLONERANGE, "clonerange", clonerange_f, 4, 1 },
 	{ OP_COPYRANGE, "copyrange", copyrange_f, 4, 1 },
 	{ OP_CREAT, "creat", creat_f, 4, 1 },
@@ -245,7 +246,6 @@ opdesc_t	ops[] = {
 	{ OP_RESVSP, "resvsp", resvsp_f, 1, 1 },
 	{ OP_RMDIR, "rmdir", rmdir_f, 1, 1 },
 	{ OP_SETATTR, "setattr", setattr_f, 0, 1 },
-	{ OP_SETXATTR, "setxattr", setxattr_f, 1, 1 },
 	{ OP_SPLICE, "splice", splice_f, 1, 1 },
 	{ OP_STAT, "stat", stat_f, 1, 0 },
 	{ OP_SYMLINK, "symlink", symlink_f, 2, 1 },
@@ -2732,7 +2732,7 @@ out_fdr:
 }
 
 void
-setxattr_f(int opno, long r)
+chproj_f(int opno, long r)
 {
 #ifdef XFS_XFLAG_EXTSIZE
 	struct fsxattr	fsx;
@@ -2761,7 +2761,7 @@ setxattr_f(int opno, long r)
 		e = xfsctl(f.path, fd, XFS_IOC_FSSETXATTR, &fsx);
 	}
 	if (v)
-		printf("%d/%d: setxattr %s %u %d\n", procid, opno, f.path, p, e);
+		printf("%d/%d: chproj %s %u %d\n", procid, opno, f.path, p, e);
 	free_pathname(&f);
 	close(fd);
 #endif
Signature · 1 line
2.11.0
#1 lore raw
Quoted 15 lines · On Thu, Mar 28, 2019 at 06:53:52PM +0000, [email protected] wrote:

From: Filipe Manana <[email protected]>

The existing setxattr operation is used to change the project identifier attribute associated with an inode, and not about setting a xattr (the name and value pair) for a file/directory, which is confusing. So rename the operation to chproj, which is more descriptive about what it does and avoids any confusion.

Fsstress currently has no operations for setting and getting xattrs of a file (for any namespace), and this patch is a preparation for adding such operations in a subsequent patch.

This operation actually used to be named chproj until the following commit:

Quoted 8 lines

commit 6449a993f2dfb3faaaa44e29d2f7d1bb7c5db9ba
Author: Nathan Scott <[email protected]>
Date: Mon Dec 5 21:41:47 2005 +0000

Switch to always using get/setxattr rather than a separate projid call on IRIX. Merge of master-melb:xfs-cmds:24692a by kenmcd.

Which does not explain the rationale for the renaming at all.

Yes it does. The ioctls the function uses are called "get/setxattr", not "chproj". i.e. FS_IOC_FS[GS]ETXATTR.

Yes, it currently changes the project ID, but that ioctl can change a bunch more flag attributes on inodes. I'm guessing the intent was to extend it to changing more than just the project ID. e.g setting extent size hints.

The intent was most likely to extend it to testing other bits of the FS_IOC_FS[GS]ETXATTR interface, so it's appropriately named. if youare going to change it, then "fssetxattr" is probably the right thing to change it to...

Cheers,

Dave.

Signature · 2 lines
Dave Chinner
[email protected]