Skip to contentSkip to conversation

Staging: media: davinci_vpfe: Convert macro 'IPIPE_S12Q8' into inline

PATCH In review Madhumitha Prabakaran 2 participants 2 messages Mar 29, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Staging: media: davinci_vpfe: Convert macro 'IPIPE_S12Q8' into inline

Convert macro 'IPIPE_S12Q8' into an inline function to maintain Linux kernel coding style based on which inline function is preferable to macro resembling function.

---
Change in v2
- Resent patch
- Changed subject line

---
 .../media/davinci_vpfe/dm365_ipipe_hw.c       | 24 ++++++++++---------
 1 file changed, 13 insertions(+), 11 deletions(-)
drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c +13 -11
index 565a3dc5bed1..110473c30577 100644
@@ -825,8 +825,10 @@ ipipe_set_lum_adj_regs(void __iomem *base_addr, struct ipipe_lum_adj *lum_adj)
 	regw_ip(base_addr, val, YUV_ADJ);
 }
 
-#define IPIPE_S12Q8(decimal, integer) \
-	(((decimal & 0xff) | ((integer & 0xf) << 8)))
+inline u32 ipipe_s12q8(unsigned short decimal, short integer)
+{
+	return (decimal & 0xff) | ((integer & 0xf) << 8);
+}
 
 void ipipe_set_rgb2ycbcr_regs(void __iomem *base_addr,
 			      struct vpfe_ipipe_rgb2yuv *yuv)
@@ -835,23 +837,23 @@ void ipipe_set_rgb2ycbcr_regs(void __iomem *base_addr,
 
 	/* S10Q8 */
 	ipipe_clock_enable(base_addr);
-	val = IPIPE_S12Q8(yuv->coef_ry.decimal, yuv->coef_ry.integer);
+	val = ipipe_s12q8(yuv->coef_ry.decimal, yuv->coef_ry.integer);
 	regw_ip(base_addr, val, YUV_MUL_RY);
-	val = IPIPE_S12Q8(yuv->coef_gy.decimal, yuv->coef_gy.integer);
+	val = ipipe_s12q8(yuv->coef_gy.decimal, yuv->coef_gy.integer);
 	regw_ip(base_addr, val, YUV_MUL_GY);
-	val = IPIPE_S12Q8(yuv->coef_by.decimal, yuv->coef_by.integer);
+	val = ipipe_s12q8(yuv->coef_by.decimal, yuv->coef_by.integer);
 	regw_ip(base_addr, val, YUV_MUL_BY);
-	val = IPIPE_S12Q8(yuv->coef_rcb.decimal, yuv->coef_rcb.integer);
+	val = ipipe_s12q8(yuv->coef_rcb.decimal, yuv->coef_rcb.integer);
 	regw_ip(base_addr, val, YUV_MUL_RCB);
-	val = IPIPE_S12Q8(yuv->coef_gcb.decimal, yuv->coef_gcb.integer);
+	val = ipipe_s12q8(yuv->coef_gcb.decimal, yuv->coef_gcb.integer);
 	regw_ip(base_addr, val, YUV_MUL_GCB);
-	val = IPIPE_S12Q8(yuv->coef_bcb.decimal, yuv->coef_bcb.integer);
+	val = ipipe_s12q8(yuv->coef_bcb.decimal, yuv->coef_bcb.integer);
 	regw_ip(base_addr, val, YUV_MUL_BCB);
-	val = IPIPE_S12Q8(yuv->coef_rcr.decimal, yuv->coef_rcr.integer);
+	val = ipipe_s12q8(yuv->coef_rcr.decimal, yuv->coef_rcr.integer);
 	regw_ip(base_addr, val, YUV_MUL_RCR);
-	val = IPIPE_S12Q8(yuv->coef_gcr.decimal, yuv->coef_gcr.integer);
+	val = ipipe_s12q8(yuv->coef_gcr.decimal, yuv->coef_gcr.integer);
 	regw_ip(base_addr, val, YUV_MUL_GCR);
-	val = IPIPE_S12Q8(yuv->coef_bcr.decimal, yuv->coef_bcr.integer);
+	val = ipipe_s12q8(yuv->coef_bcr.decimal, yuv->coef_bcr.integer);
 	regw_ip(base_addr, val, YUV_MUL_BCR);
 	regw_ip(base_addr, yuv->out_ofst_y & RGB2YCBCR_OFST_MASK, YUV_OFT_Y);
 	regw_ip(base_addr, yuv->out_ofst_cb & RGB2YCBCR_OFST_MASK, YUV_OFT_CB);
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 9 lines · Madhumitha Prabakaran

Convert macro 'IPIPE_S12Q8' into an inline function to maintain Linux kernel coding style based on which inline function is preferable to macro resembling function.

---
Change in v2
- Resent patch

Why did you resend this? You don't have to say this, you need to describe the changes made.

greg k-h