ARM: rmobile: alt: Remove R8A7794_ETHERNET_B
PATCH 1/4 ARM: rmobile: alt: Remove R8A7794_ETHERNET_B
The R8A7794_ETHERNET_B config option is unused and based on the description, this is a setting which should be fully done on a DT level instead. Remove this config option.
Signed-off-by Marek Vasut <[email protected]>
Cc Nobuhiro Iwamatsu <[email protected]>
--- board/renesas/alt/Kconfig | 9 --------- 1 file changed, 9 deletions(-)
board/renesas/alt/Kconfig +0 -9
@@ -9,13 +9,4 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "alt" -config R8A7794_ETHERNET_B - bool "Use ethernet B function" - depends on TARGET_ALT - default n - help - ALT board can use default ethernet and etnernet B function. - This config set pin function of ethenet B. You also needt to change - DIP switch of board in order to use this function. - endif
Signature · 1 line
2.20.1
PATCH 2/4 ARM: rmobile: alt: Remove CLK2MHZ macro
The CLK2MHZ macro is unused, remove it.
Signed-off-by Marek Vasut <[email protected]>
Cc Nobuhiro Iwamatsu <[email protected]>
--- board/renesas/alt/alt.c | 1 - 1 file changed, 1 deletion(-)
board/renesas/alt/alt.c +0 -1
@@ -28,7 +28,6 @@DECLARE_GLOBAL_DATA_PTR ; -#define CLK2MHZ (clk) (clk / 1000 / 1000)void s_init (void ) {struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE ;
Signature · 1 line
2.20.1
PATCH 3/4 ARM: rmobile: alt: Synchronize defconfig
In reply to Marek VasutSynchronize the R8A7794 Alt defconfig, enable DM SPI, DM SPI FLASH and I2C driver support.
Signed-off-by Marek Vasut <[email protected]>
Cc Nobuhiro Iwamatsu <[email protected]>
--- configs/alt_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/alt_defconfig +3 -0
@@ -57,12 +57,14 @@ CONFIG_CLK_RENESAS=y CONFIG_DM_GPIO=y CONFIG_RCAR_GPIO=y CONFIG_DM_I2C=y +CONFIG_SYS_I2C_RCAR_I2C=y CONFIG_SYS_I2C_RCAR_IIC=y CONFIG_DM_MMC=y CONFIG_SH_MMCIF=y CONFIG_RENESAS_SDHI=y CONFIG_MTD=y CONFIG_MTD_DEVICE=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_SPI_FLASH_MTD=y
@@ -80,6 +82,7 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y CONFIG_SCIF_CONSOLE=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_SH_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y
Signature · 1 line
2.20.1
PATCH 4/4 ARM: rmobile: Fix PHY LED mode register mask
In reply to Marek VasutThe PHY LED mode register mask should be 0xc000 , not 0xc0000. Correct the mask to operate on the right bits.
Signed-off-by Marek Vasut <[email protected]>
Cc Nobuhiro Iwamatsu <[email protected]>
--- board/renesas/alt/alt.c | 2 +- board/renesas/gose/gose.c | 2 +- board/renesas/koelsch/koelsch.c | 2 +- board/renesas/lager/lager.c | 2 +- board/renesas/porter/porter.c | 2 +- board/renesas/silk/silk.c | 2 +- board/renesas/stout/stout.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-)
board/renesas/alt/alt.c +1 -1
@@ -92,7 +92,7 @@ int dram_init_banksize(void)/* KSZ8041RNLI */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/gose/gose.c +1 -1
@@ -98,7 +98,7 @@ int dram_init_banksize(void)/* KSZ8041RNLI */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/koelsch/koelsch.c +1 -1
@@ -100,7 +100,7 @@ int dram_init_banksize(void)/* Koelsch has KSZ8041NL/RNL */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/lager/lager.c +1 -1
@@ -109,7 +109,7 @@ int dram_init_banksize(void)/* KSZ8041NL/RNL */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/porter/porter.c +1 -1
@@ -98,7 +98,7 @@ int dram_init_banksize(void)/* porter has KSZ8041RNLI */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/silk/silk.c +1 -1
@@ -93,7 +93,7 @@ int dram_init_banksize(void)/* porter has KSZ8041RNLI */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
board/renesas/stout/stout.c +1 -1
@@ -112,7 +112,7 @@ int dram_init_banksize(void)/* Stout has KSZ8041NL/RNL */ #define PHY_CONTROL1 0x1E -#define PHY_LED_MODE 0xC0000 +#define PHY_LED_MODE 0xC000#define PHY_LED_MODE_ACK 0x4000int board_phy_config (struct phy_device *phydev) {
Signature · 1 line
2.20.1