git stash --snapshot
RFC 1/1 git stash --snapshot
About two weeks ago there was a discussion about building an undo stack.
https://public-inbox.org/git/[email protected]/
it had me thinking about whether a stash --snapshot might be useful. Below is a conceptual change - by no means even close to complete. This would allow scripting to wrap critical commands with a "git stash push --snapshot" without changing the working directory. For symmetry, a "git stash pop --force" is needed if --include-untracked were used to stash everything in the first place. It might be more useful also to wait until stash is converted to C, I suppose. I'm wondering whether to pursue this or drop it. Thoughts? (and I beg forgiveness for what my mailer might do to the wrapping of this patch, and I already know the indent is wrong between 329 and 370, and that the granularity of the --force option is wrong).
git-stash.sh +1 -1
@@ -5,12 +5,13 @@ dashless=$(basename "$0" | sed -e 's/-/ /') USAGE="list [<options>] or: $dashless show [<stash>] or: $dashless drop [-q|--quiet] [<stash>] - or: $dashless ( pop | apply ) [--index] [-q|--quiet] [<stash>] + or: $dashless ( pop | apply ) [--index] [-q|--quiet] [-f|--force]
[<stash>]
or: $dashless branch <branchname> [<stash>]
or: $dashless save [--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [<message>]
or: $dashless [push [--patch] [-k|--[no-]keep-index] [-q|--quiet]
[-u|--include-untracked] [-a|--all] [-m <message>]+ [--snapshot]
[-- <pathspec>...]]
or: $dashless clear"
@@ -252,6 +253,7 @@ push_stash () {
patch_mode=
untracked=
stash_msg=
+ snapshot=
while test $# != 0
do
case "$1" in
@@ -286,6 +288,9 @@ push_stash () {
--message=*)
stash_msg=${1#--message=}
;;
+ --snapshot)
+ snapshot=t
+ ;;
--help)
show_help
;;
@@ -329,6 +334,8 @@ push_stash () {
die "$(gettext "Cannot save the current status")"
say "$(eval_gettext "Saved working directory and index state\$stash_msg")"
+ if test -z "$snapshot"
+ then
if test -z "$patch_mode"
then
test "$untracked" = "all" && CLEAN_X_OPTION=-x ||
CLEAN_X_OPTION=
@@ -363,6 +370,7 @@ push_stash () {
git reset -q -- "$@"
fi
fi+ fi
}
save_stash () {
@@ -490,6 +498,7 @@ parse_flags_and_rev()
FLAGS=
REV=
+ FORCE_OPTION=
for opt
do
case "$opt" in
@@ -499,6 +508,9 @@ parse_flags_and_rev()
--index)
INDEX_OPTION=--index
;;
+ -f|--force)
+ FORCE_OPTION=--force
+ ;;
--help)
show_help
;;@@ -607,7 +619,7 @@ apply_stash () {
if test -n "$u_tree"
then
GIT_INDEX_FILE="$TMPindex" git read-tree "$u_tree" &&
- GIT_INDEX_FILE="$TMPindex" git checkout-index --all &&
+ GIT_INDEX_FILE="$TMPindex" git checkout-index --all
$FORCE_OPTION &&
rm -f "$TMPindex" ||
die "$(gettext "Could not restore untracked files from stash
entry")"
fi
@@ -688,7 +700,7 @@ apply_to_branch () {
set -- --index "$@"
assert_stash_like "$@"- git checkout -b $branch $REV^ &&
+ git checkout -b $branch $FORCE_OPTION $REV^ &&
apply_stash "$@" && {
test -z "$IS_STASH_REF" || drop_stash "$@"
}Regards,
Randall
-- Brief whoami:
NonStop developer since approximately 211288444200000000 UNIX developer since approximately 421664400
-- In my real life, I talk too much.
Quoted 7 lines · Randall S. Becker
About two weeks ago there was a discussion about building an undo stack.
https://public-inbox.org/git/[email protected]/it had me thinking about whether a stash --snapshot might be useful. Below is a conceptual change - by no means even close to complete. This would allow scripting to wrap critical commands with a "git stash push --snapshot" without changing the working directory.
I'm not sure I understand this proposal correctly. Since you mention this being used in scripting, would it be any different than using 'git stash push && git stash apply'? The former is a bit more expensive of course, but conceptually it would do the same thing, I think.
I could see this as somewhat useful, but I don't think stash supports
all the necessary operations yet. E.g. what if you are in the middle
of resolving a merge conflict. But maybe a bit more of a description of your problem would help convince me.
For the undo stack discussion, I think I prefer something like Duy's backup-log [*1*] proposal, that is built into git, rather than scripting my own solution, even if it's supported by 'git stash'.
I meant to review those patches, but unfortunately never got around to that. But if it's something that interests you as well, reviewing the patches is probably the best way to get support for this into git.
*1*: https://public-inbox.org/git/[email protected]/
Quoted 3 lines
For symmetry, a "git stash pop
--force" is needed if --include-untracked were used to stash everything in the first place.
What exactly is the force option meant to do? Apply the stash anyway, and discard current changes? Wouldn't that lead to loosing data again, just in a different way?
Quoted 2 lines
It might be more useful also to wait until stash is
converted to C, I suppose.
Yes please, any changes should ideally also apply to the stash-in-C topic, unless they are actual bug fixes.
Quoted 111 lines
I'm wondering whether to pursue this or drop it.
Thoughts? (and I beg forgiveness for what my mailer might do to the wrapping of this patch, and I already know the indent is wrong between 329 and 370, and that the granularity of the --force option is wrong).git-stash.sh +1
-1@@ -5,12 +5,13 @@ dashless=$(basename "$0" | sed -e 's/-/ /') USAGE="list [<options>] or: $dashless show [<stash>] or: $dashless drop [-q|--quiet] [<stash>] - or: $dashless ( pop | apply ) [--index] [-q|--quiet] [<stash>] + or: $dashless ( pop | apply ) [--index] [-q|--quiet] [-f|--force][<stash>]
or: $dashless branch <branchname> [<stash>] or: $dashless save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [-u|--include-untracked] [-a|--all] [<message>] or: $dashless [push [--patch] [-k|--[no-]keep-index] [-q|--quiet] [-u|--include-untracked] [-a|--all] [-m <message>]git-stash.sh +5
-0+ [--snapshot] [-- <pathspec>...]] or: $dashless clear"@@ -252,6 +253,7 @@ push_stash () { patch_mode= untracked= stash_msg= + snapshot= while test $# != 0 do case "$1" in@@ -286,6 +288,9 @@ push_stash () { --message=*) stash_msg=${1#--message=} ;; + --snapshot) + snapshot=t + ;; --help) show_help ;;@@ -329,6 +334,8 @@ push_stash () { die "$(gettext "Cannot save the current status")" say "$(eval_gettext "Saved working directory and index state\$stash_msg")"
git-stash.sh +2
-0+ if test -z "$snapshot" + then if test -z "$patch_mode" then test "$untracked" = "all" && CLEAN_X_OPTION=-x ||CLEAN_X_OPTION=
git-stash.sh +6
-1@@ -363,6 +370,7 @@ push_stash () { git reset -q -- "$@" fi fi + fi } save_stash () {@@ -490,6 +498,7 @@ parse_flags_and_rev() FLAGS= REV= + FORCE_OPTION= for opt do case "$opt" in@@ -499,6 +508,9 @@ parse_flags_and_rev() --index) INDEX_OPTION=--index ;; + -f|--force) + FORCE_OPTION=--force + ;; --help) show_help ;;@@ -607,7 +619,7 @@ apply_stash () { if test -n "$u_tree" then GIT_INDEX_FILE="$TMPindex" git read-tree "$u_tree" && - GIT_INDEX_FILE="$TMPindex" git checkout-index --all && + GIT_INDEX_FILE="$TMPindex" git checkout-index --all$FORCE_OPTION &&
rm -f "$TMPindex" || die "$(gettext "Could not restore untracked files from stashentry")"
figit-stash.sh +1
-1@@ -688,7 +700,7 @@ apply_to_branch () { set -- --index "$@" assert_stash_like "$@" - git checkout -b $branch $REV^ && + git checkout -b $branch $FORCE_OPTION $REV^ && apply_stash "$@" && { test -z "$IS_STASH_REF" || drop_stash "$@" }Regards,
Randall-- Brief whoami:
NonStop developer since approximately 211288444200000000 UNIX developer since approximately 421664400
-- In my real life, I talk too much.