Skip to contentSkip to conversation

Staging: comedi: drivers: pcl818: Fixed a coding style error.

PATCH In review Will Cunningham 2 participants 2 messages Apr 1, 2019 Staging

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 Staging: comedi: drivers: pcl818: Fixed a coding style error.

Removed unnecessary parentheses.

---
Changes in v2:
- Removed a typo from the commit message.

---
 drivers/staging/comedi/drivers/pcl818.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/comedi/drivers/pcl818.c +4 -4
index 0af5315d4357..da5d53a288f7 100644
@@ -1012,7 +1012,7 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		pcl818_alloc_dma(dev, it->options[2]);
 
 	/* use 1MHz or 10MHz oscilator */
-	if ((it->options[3] == 0) || (it->options[3] == 10))
+	if (it->options[3] == 0 || it->options[3] == 10)
 		osc_base = I8254_OSC_BASE_10MHZ;
 	else
 		osc_base = I8254_OSC_BASE_1MHZ;
@@ -1026,7 +1026,7 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	devpriv->ns_min = board->ns_min;
 	if (!board->is_818) {
 		/* extended PCL718 to 100kHz DAC */
-		if ((it->options[6] == 1) || (it->options[6] == 100))
+		if (it->options[6] == 1 || it->options[6] == 100)
 			devpriv->ns_min = 10000;
 	}
 
@@ -1067,12 +1067,12 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		s->maxdata	= 0x0fff;
 		s->range_table	= &range_unipolar5;
 		if (board->is_818) {
-			if ((it->options[4] == 1) || (it->options[4] == 10))
+			if (it->options[4] == 1 || it->options[4] == 10)
 				s->range_table = &range_unipolar10;
 			if (it->options[4] == 2)
 				s->range_table = &range_unknown;
 		} else {
-			if ((it->options[5] == 1) || (it->options[5] == 10))
+			if (it->options[5] == 1 || it->options[5] == 10)
 				s->range_table = &range_unipolar10;
 			if (it->options[5] == 2)
 				s->range_table = &range_unknown;
Signature · 1 line
2.19.2
maintainer
#1 lore raw
Quoted 15 lines · Will Cunningham

Removed unnecessary parentheses.

---
Changes in v2:
- Removed a typo from the commit message.

---
 drivers/staging/comedi/drivers/pcl818.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/comedi/drivers/pcl818.c +0 -0
index 0af5315d4357..da5d53a288f7 100644

drivers/staging/comedi/drivers/pcl818.c static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it) · line 1015

Quoted 5 lines
drivers/staging/comedi/drivers/pcl818.c +1 -1
@@ -1012,7 +1012,7 @@ static int pcl818_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		pcl818_alloc_dma(dev, it->options[2]);
 
 	/* use 1MHz or 10MHz oscilator */
-	if ((it->options[3] == 0) || (it->options[3] == 10))
+	if (it->options[3] == 0 || it->options[3] == 10)

Again, no, the original is best.

thanks,

greg k-h