Skip to contentSkip to conversation

macsec: add noinline tag to avoid a frame size warning

PATCH Applied Florian Westphal 3 participants 3 messages Apr 1, 2019 – Apr 2, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 macsec: add noinline tag to avoid a frame size warning

seen with debug config:
drivers/net/macsec.c: In function 'dump_secy':
drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=]

just mark it with noinline_for_stack, this is netlink dump code.

v2: use 'static noinline_for_stack int' consistently

---
 drivers/net/macsec.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)
drivers/net/macsec.c +12 -10
index 947c40f112d1..263bfafdb004 100644
@@ -2175,8 +2175,9 @@ static int copy_tx_sa_stats(struct sk_buff *skb,
 	return 0;
 }
 
-static int copy_rx_sa_stats(struct sk_buff *skb,
-			    struct macsec_rx_sa_stats __percpu *pstats)
+static noinline_for_stack int
+copy_rx_sa_stats(struct sk_buff *skb,
+		 struct macsec_rx_sa_stats __percpu *pstats)
 {
 	struct macsec_rx_sa_stats sum = {0, };
 	int cpu;
@@ -2201,8 +2202,8 @@ static int copy_rx_sa_stats(struct sk_buff *skb,
 	return 0;
 }
 
-static int copy_rx_sc_stats(struct sk_buff *skb,
-			    struct pcpu_rx_sc_stats __percpu *pstats)
+static noinline_for_stack int
+copy_rx_sc_stats(struct sk_buff *skb, struct pcpu_rx_sc_stats __percpu *pstats)
 {
 	struct macsec_rx_sc_stats sum = {0, };
 	int cpu;
@@ -2265,8 +2266,8 @@ static int copy_rx_sc_stats(struct sk_buff *skb,
 	return 0;
 }
 
-static int copy_tx_sc_stats(struct sk_buff *skb,
-			    struct pcpu_tx_sc_stats __percpu *pstats)
+static noinline_for_stack int
+copy_tx_sc_stats(struct sk_buff *skb, struct pcpu_tx_sc_stats __percpu *pstats)
 {
 	struct macsec_tx_sc_stats sum = {0, };
 	int cpu;
@@ -2305,8 +2306,8 @@ static int copy_tx_sc_stats(struct sk_buff *skb,
 	return 0;
 }
 
-static int copy_secy_stats(struct sk_buff *skb,
-			   struct pcpu_secy_stats __percpu *pstats)
+static noinline_for_stack int
+copy_secy_stats(struct sk_buff *skb, struct pcpu_secy_stats __percpu *pstats)
 {
 	struct macsec_dev_stats sum = {0, };
 	int cpu;
@@ -2410,8 +2411,9 @@ static int nla_put_secy(struct macsec_secy *secy, struct sk_buff *skb)
 	return 1;
 }
 
-static int dump_secy(struct macsec_secy *secy, struct net_device *dev,
-		     struct sk_buff *skb, struct netlink_callback *cb)
+static noinline_for_stack int
+dump_secy(struct macsec_secy *secy, struct net_device *dev,
+	  struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct macsec_rx_sc *rx_sc;
 	struct macsec_tx_sc *tx_sc = &secy->tx_sc;
Signature · 1 line
2.21.0
maintainer Reviewed-by on v2 1/1
#1 lore raw
Quoted 11 lines · Florian Westphal

seen with debug config:
drivers/net/macsec.c: In function 'dump_secy':
drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=]

just mark it with noinline_for_stack, this is netlink dump code.

v2: use 'static noinline_for_stack int' consistently

Thanks Florian.

Signature · 1 line
Sabrina
maintainer Applied
#2 lore raw
In reply to Florian Westphal

From: Florian Westphal <[email protected]>
Date: Mon, 1 Apr 2019 22:59:09 +0200

Quoted 11 lines

seen with debug config:
drivers/net/macsec.c: In function 'dump_secy':
drivers/net/macsec.c:2597: warning: the frame size of 2216 bytes is larger than 2048 bytes [-Wframe-larger-than=]

just mark it with noinline_for_stack, this is netlink dump code.

v2: use 'static noinline_for_stack int' consistently

Applied, thank you.