Skip to contentSkip to conversation

ARM: dts: imx6q-logicpd: Reduce inrush current on start

PATCH Applied Adam Ford 2 participants 2 messages Apr 2, 2019 – Apr 11, 2019

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH v2 1/1 ARM: dts: imx6q-logicpd: Reduce inrush current on start

The main 3.3V regulator sources a series of additional regulators. This patch adds a small delay, so when the 3.3V regulator comes on it delays a bit before the subsequent regulators can come on. This reduces the inrush current a bit on the external DC power supply to help prevent a situation where the sourcing power supply cannot source enough current and overloads and the kit fails to start.

Fixes 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD

i.MX6QD EVM")

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +1 -0
index fb01fa6e4224..e31b6923cb72 100644
@@ -99,6 +99,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 		regulator-always-on;
 	};
Signature · 1 line
2.17.1
Applied
#1 lore raw
Quoted 8 lines · Adam Ford

The main 3.3V regulator sources a series of additional regulators. This patch adds a small delay, so when the 3.3V regulator comes on it delays a bit before the subsequent regulators can come on. This reduces the inrush current a bit on the external DC power supply to help prevent a situation where the sourcing power supply cannot source enough current and overloads and the kit fails to start.

Quoted 4 lines
Fixes 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD

i.MX6QD EVM")

Applied, thanks.