Skip to contentSkip to conversation

ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1

PATCH Applied Adam Ford 2 participants 2 messages Apr 2, 2019 – Apr 11, 2019

Subsystems (2)
lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1

Some USB peripherals draw more power, and the sourcing regulator take a little time to turn on. This patch fixes an issue where some devices occasionally do not get detected, because the power isn't quite ready when communication starts, so we add a bit of a delay.

Fixes 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD

i.MX6QD EVM")

arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi +1 -0
index db6b5b900826..7731db493cb0 100644
@@ -88,6 +88,7 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
 		enable-active-high;
 	};
 
Signature · 1 line
2.17.1
Applied
#1 lore raw
Quoted 10 lines · Adam Ford

Some USB peripherals draw more power, and the sourcing regulator take a little time to turn on. This patch fixes an issue where some devices occasionally do not get detected, because the power isn't quite ready when communication starts, so we add a bit of a delay.

Fixes 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD

i.MX6QD EVM")

Applied, thanks.