Skip to contentSkip to conversation

ip: support for xfrm interfaces

PATCH In review Matt Ellison 2 participants 2 messages Apr 4, 2019 – Apr 5, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ip: support for xfrm interfaces

Interfaces take a 'if_id' which is an interface id which can be set on an xfrm policy as its interface lookup key (XFRMA_IF_ID).

---

My apologies for taking so long to get v3 out:

v3 Changes:
* Only set IF_ID if set on command line.

 ip/Makefile                             |  2 +-
 ip/iplink.c                             |  3 +-
 ip/link_xfrm.c                          | 77 +++++++++++++++++++++++++
 man/man8/ip-link.8.in                   | 27 ++++++++-
 testsuite/tests/ip/link/add_type_xfrm.t | 32 ++++++++++
 5 files changed, 138 insertions(+), 3 deletions(-)
 create mode 100644 ip/link_xfrm.c
 create mode 100755 testsuite/tests/ip/link/add_type_xfrm.t
ip/Makefile +1 -1
index a88f9366..7ce6e91a 100644
@@ -5,7 +5,7 @@ IPOBJ=ip.o ipaddress.o ipaddrlabel.o iproute.o iprule.o ipnetns.o \
     ipxfrm.o xfrm_state.o xfrm_policy.o xfrm_monitor.o iplink_dummy.o \
     iplink_ifb.o iplink_nlmon.o iplink_team.o iplink_vcan.o iplink_vxcan.o \
     iplink_vlan.o link_veth.o link_gre.o iplink_can.o iplink_xdp.o \
-    iplink_macvlan.o ipl2tp.o link_vti.o link_vti6.o \
+    iplink_macvlan.o ipl2tp.o link_vti.o link_vti6.o link_xfrm.o \
     iplink_vxlan.o tcp_metrics.o iplink_ipoib.o ipnetconf.o link_ip6tnl.o \
     link_iptnl.o link_gre6.o iplink_bond.o iplink_bond_slave.o iplink_hsr.o \
     iplink_bridge.o iplink_bridge_slave.o ipfou.o iplink_ipvlan.o \
ip/iplink.c +2 -1
index 5a3c9613..7952cb2b 100644
@@ -121,7 +121,8 @@ void iplink_usage(void)
 			"          bridge | bond | team | ipoib | ip6tnl | ipip | sit | vxlan |\n"
 			"          gre | gretap | erspan | ip6gre | ip6gretap | ip6erspan |\n"
 			"          vti | nlmon | team_slave | bond_slave | bridge_slave |\n"
-			"          ipvlan | ipvtap | geneve | vrf | macsec | netdevsim | rmnet }\n");
+			"          ipvlan | ipvtap | geneve | vrf | macsec | netdevsim | rmnet |\n"
+			"          xfrm }\n");
 	}
 	exit(-1);
 }
ip/link_xfrm.c new file +77 -0

77 lines not on this page · raw message

man/man8/ip-link.8.in +26 -1
index 988314e1..2411d43e 100644
@@ -221,7 +221,8 @@ ip-link \- network device configuration
 .BR vrf " |"
 .BR macsec " |"
 .BR netdevsim " |"
-.BR rmnet " ]"
+.BR rmnet " |"
+.BR xfrm " ]"
 
 .ti -8
 .IR ETYPE " := [ " TYPE " |"
@@ -350,6 +351,9 @@ Link types:
 .sp
 .BR rmnet
 - Qualcomm rmnet device
+.sp
+.BR xfrm
+- Virtual xfrm interface
 .in -8
 
 .TP
@@ -1741,6 +1745,27 @@ the following additional arguments are supported:
 
 .in -8
 
+.TP
+XFRM Type Support
+For a link of type
+.I XFRM
+the following additional arguments are supported:
+
+.BI "ip link add " DEVICE " type xfrm dev " PHYS_DEV " [ if_id " IF_ID " ]"
+
+.in +8
+.sp
+.BI dev " PHYS_DEV "
+- specifies the underlying physical interface from which transform traffic is sent and received.
+
+.sp
+.BI if_id " IF-ID "
+- specifies the hexadecimal lookup key used to send traffic to and from specific xfrm
+policies. Policies must be configured with the same key. If not set, the key defaults to
+0 and will match any policies which similarly do not have a lookup key configuration.
+
+.in -8
+
 .SS ip link delete - delete virtual link
 
 .TP
testsuite/tests/ip/link/add_type_xfrm.t new file +32 -0
new file mode 100755
index 00000000..78ce28e0
@@ -0,0 +1,32 @@
+#!/bin/sh
+
+. lib/generic.sh
+
+ts_log "[Testing Add XFRM Interface, With IF-ID]"
+
+PHYS_DEV="lo"
+NEW_DEV="$(rand_dev)"
+IF_ID="0xf"
+
+ts_ip "$0" "Add $NEW_DEV xfrm interface"    link add dev $NEW_DEV type xfrm dev $PHYS_DEV if_id $IF_ID
+
+ts_ip "$0" "Show $NEW_DEV xfrm interface"   -d link show dev $NEW_DEV
+test_on "$NEW_DEV"
+test_on "if_id $IF_ID"
+
+ts_ip "$0" "Del $NEW_DEV xfrm interface"   link del dev $NEW_DEV
+
+
+ts_log "[Testing Add XFRM Interface, No IF-ID]"
+
+PHYS_DEV="lo"
+NEW_DEV="$(rand_dev)"
+IF_ID="0xf"
+
+ts_ip "$0" "Add $NEW_DEV xfrm interface"    link add dev $NEW_DEV type xfrm dev $PHYS_DEV
+
+ts_ip "$0" "Show $NEW_DEV xfrm interface"   -d link show dev $NEW_DEV
+test_on "$NEW_DEV"
+test_on_not "if_id $IF_ID"
+
+ts_ip "$0" "Del $NEW_DEV xfrm interface"   link del dev $NEW_DEV
Signature · 20 lines
2.21.0


-- 



Please be advised that this email may contain confidential information. 
If you are not the intended recipient, please notify us by email by 
replying to the sender and delete this message. The sender disclaims that 
the content of this email constitutes an offer to enter into, or the 
acceptance of, any agreement; provided that the foregoing does not 
invalidate the binding effect of any digital or other electronic 
reproduction of a manual signature that is included in any attachment.


 
<https://twitter.com/arroyo_networks>   
<https://www.linkedin.com/company/arroyo-networks>   
<https://www.github.com/ArroyoNetworks>