Skip to contentSkip to conversation

Add support for lradc on A83T

PATCH RESEND Applied [email protected] 3 participants 10 messages Mar 27, 2019 – Apr 9, 2019

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v4 cover Add support for lradc on A83T

From: Ondrej Jirman <megous-5qf/[email protected]>

(This is a re-send, with input subsystem maintainer added. Sorry, for the extra noise, I did only send the v4 to the previous recipients of v3, and didn't notice input subsystem was missing back then too. Thank you wens for pointing it out.)

This series implements r_lradc (low res ADC) support for A83T.

This is a continuation of v3 patch series from 2017 by Ziping Chen. I've rebased it on top of linux-next and changed the compatibe string as requested back then.[1]

There was some talk of iio based lradc driver back then[2], but noone stepped forward to make it. Let's finish this series, so that it's at least possible to add support for tablet keys on various A83T tablets as that's the main use of lradc module.

[1] https://lkml.org/lkml/2017/6/26/558

[2] https://lkml.org/lkml/2017/6/27/877

Please take a look, and apply the patches if you have no objections.

regards,
Ondrej Jirman

Changes for v4:
- changed comaptible string to allwinner,sun8i-a83t-r-lradc (drop -keys suffix)
- dropped 0 prefix in the r_lradc DT node
- added sample A83T lradc user (TBS A711 tablet)

Changes for v3:
- Fix some issuses raised by Maxime.
- Added Rob's ACK.

Changes for v2:
- Add an A83T specific compatible.

Ondrej Jirman (1):
ARM: dts: sun8i: tbs-a711: Add support for volume keys input

Ziping Chen (3):
input: sun4i-a10-lradc-keys: Add support for A83T
dt-bindings: input: Add R_LRADC support for A83T
ARM: dts: sunxi: Add R_LRADC support for A83T

 .../bindings/input/sun4i-lradc-keys.txt       |  6 ++-
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts     | 20 ++++++++++
 arch/arm/boot/dts/sun8i-a83t.dtsi             |  7 ++++
 drivers/input/keyboard/sun4i-lradc-keys.c     | 38 +++++++++++++++++--
 4 files changed, 65 insertions(+), 6 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH RESEND v4 1/4 input: sun4i-a10-lradc-keys: Add support for A83T

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices.

---
 drivers/input/keyboard/sun4i-lradc-keys.c | 38 ++++++++++++++++++++---
 1 file changed, 34 insertions(+), 4 deletions(-)
drivers/input/keyboard/sun4i-lradc-keys.c +34 -4
index 57272df34cd5..df3eec72a9b2 100644
@@ -46,6 +46,7 @@
 #define CONTINUE_TIME_SEL(x)	((x) << 16) /* 4 bits */
 #define KEY_MODE_SEL(x)		((x) << 12) /* 2 bits */
 #define LEVELA_B_CNT(x)		((x) << 8)  /* 4 bits */
+#define HOLD_KEY_EN(x)		((x) << 7)
 #define HOLD_EN(x)		((x) << 6)
 #define LEVELB_VOL(x)		((x) << 4)  /* 2 bits */
 #define SAMPLE_RATE(x)		((x) << 2)  /* 2 bits */
@@ -63,6 +64,25 @@
 #define	CHAN0_KEYDOWN_IRQ	BIT(1)
 #define CHAN0_DATA_IRQ		BIT(0)
 
+/* struct lradc_variant - Describe sun4i-a10-lradc-keys hardware variant
+ * @divisor_numerator:		The numerator of lradc Vref internally divisor
+ * @divisor_denominator:	The denominator of lradc Vref internally divisor
+ */
+struct lradc_variant {
+	u8 divisor_numerator;
+	u8 divisor_denominator;
+};
+
+static const struct lradc_variant lradc_variant_a10 = {
+	.divisor_numerator = 2,
+	.divisor_denominator = 3
+};
+
+static const struct lradc_variant r_lradc_variant_a83t = {
+	.divisor_numerator = 3,
+	.divisor_denominator = 4
+};
+
 struct sun4i_lradc_keymap {
 	u32 voltage;
 	u32 keycode;
@@ -74,6 +94,7 @@ struct sun4i_lradc_data {
 	void __iomem *base;
 	struct regulator *vref_supply;
 	struct sun4i_lradc_keymap *chan0_map;
+	const struct lradc_variant *variant;
 	u32 chan0_map_count;
 	u32 chan0_keycode;
 	u32 vref;
@@ -128,9 +149,9 @@ static int sun4i_lradc_open(struct input_dev *dev)
 	if (error)
 		return error;
 
-	/* lradc Vref internally is divided by 2/3 */
-	lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3;
-
+	lradc->vref = regulator_get_voltage(lradc->vref_supply) *
+		      lradc->variant->divisor_numerator /
+		      lradc->variant->divisor_denominator;
 	/*
 	 * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to
 	 * stabilize on press, wait (1 + 1) * 4 ms for key release
@@ -222,6 +243,12 @@ static int sun4i_lradc_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
+	lradc->variant = of_device_get_match_data(&pdev->dev);
+	if (!lradc->variant) {
+		dev_err(&pdev->dev, "Missing sun4i-a10-lradc-keys variant\n");
+		return -EINVAL;
+	}
+
 	lradc->vref_supply = devm_regulator_get(dev, "vref");
 	if (IS_ERR(lradc->vref_supply))
 		return PTR_ERR(lradc->vref_supply);
@@ -265,7 +292,10 @@ static int sun4i_lradc_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id sun4i_lradc_of_match[] = {
-	{ .compatible = "allwinner,sun4i-a10-lradc-keys", },
+	{ .compatible = "allwinner,sun4i-a10-lradc-keys",
+		.data = &lradc_variant_a10 },
+	{ .compatible = "allwinner,sun8i-a83t-r-lradc",
+		.data = &r_lradc_variant_a83t },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match);
Signature · 1 line
2.21.0
maintainer Applied
#2 lore raw

Re: [PATCH RESEND v4 1/4] input: sun4i-a10-lradc-keys: Add support for A83T

Quoted 9 lines · On Wed, Mar 27, 2019 at 03:33:36AM +0100…

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices.

Applied, this and binding patch; the dts changes should go through other relevant trees I believe.

Thanks.

Signature · 1 line
Dmitry
#3 lore raw

Re: [linux-sunxi] Re: [PATCH RESEND v4 1/4] input: sun4i-a10-lradc-keys: Add support for A83T

Hello,

Quoted 8 lines · Dmitry Torokhov
Quoted 7 lines · On Wed, Mar 27, 2019 at 03:33:36AM +0100…

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices.

Quoted 5 lines
Quoted 2 lines

Applied, this and binding patch; the dts changes should go through other relevant trees I believe.

Thank you very much. Yes, the rest should go through the sunxi tree.

regards,
Ondrej

Quoted 9 lines

Thanks.

Signature · 6 lines
Dmitry

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected]
For more options, visit https://groups.google.com/d/optout.
#4 lore raw

PATCH RESEND v4 2/4 dt-bindings: input: Add R_LRADC support for A83T

In reply to [email protected]

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res ADC like the one in Allwinner A10 SoC.

Add binding for it.

---
 .../devicetree/bindings/input/sun4i-lradc-keys.txt          | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +4 -2
index 1458c3179a63..496125c6bfb7 100644
@@ -2,12 +2,14 @@ Allwinner sun4i low res adc attached tablet keys
 ------------------------------------------------
 
 Required properties:
- - compatible: "allwinner,sun4i-a10-lradc-keys"
+ - compatible: should be one of the following string:
+		"allwinner,sun4i-a10-lradc-keys"
+		"allwinner,sun8i-a83t-r-lradc"
  - reg: mmio address range of the chip
  - interrupts: interrupt to which the chip is connected
  - vref-supply: powersupply for the lradc reference voltage
 
-Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys":
+Each key is represented as a sub-node of the compatible mentioned above:
 
 Required subnode-properties:
 	- label: Descriptive name of the key.
Signature · 1 line
2.21.0
#5 lore raw

PATCH RESEND v4 3/4 ARM: dts: sunxi: Add R_LRADC support for A83T

In reply to [email protected]

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC. Now the driver has been modified to support it.

Add support for it.

---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/boot/dts/sun8i-a83t.dtsi +7 -0
index fcb7ef5ce2df..de1b77e49f06 100644
@@ -1024,6 +1024,13 @@
 			status = "disabled";
 		};
 
+		r_lradc: lradc@1f03c00 {
+			compatible = "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01f03c00 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-a83t-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
Signature · 1 line
2.21.0
#6 lore raw

Re: [PATCH RESEND v4 3/4] ARM: dts: sunxi: Add R_LRADC support for A83T

Quoted 8 lines · On Wed, Mar 27, 2019 at 03:33:38AM +0100…

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC. Now the driver has been modified to support it.

Add support for it.

It's missing your SoB.

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

#7 lore raw

Re: [PATCH RESEND v4 3/4] ARM: dts: sunxi: Add R_LRADC support for A83T

Hello Maxime,

Quoted 11 lines · Maxime Ripard
Quoted 8 lines · On Wed, Mar 27, 2019 at 03:33:38AM +0100…

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC. Now the driver has been modified to support it.

Add support for it.

It's missing your SoB.

Please add it when aplying he patch.

regards,
Ondrej

Quoted 13 lines

Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

#8 lore raw

Re: [PATCH RESEND v4 3/4] ARM: dts: sunxi: Add R_LRADC support for A83T

Quoted 11 lines · Ondřej Jirman

Hello Maxime,

Quoted 8 lines · Maxime Ripard
Quoted 7 lines · On Wed, Mar 27, 2019 at 03:33:38AM +0100…

From: Ziping Chen <[email protected]>

Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC. Now the driver has been modified to support it.

Add support for it.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

It's missing your SoB.

Please add it when aplying he patch.

Done, thanks!
Maxime

--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Signature · 3 lines
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/[email protected]
For more options, visit https://groups.google.com/d/optout.
#9 lore raw

PATCH RESEND v4 4/4 ARM: dts: sun8i: tbs-a711: Add support for volume keys input

In reply to [email protected]

From: Ondrej Jirman <megous-5qf/[email protected]>

TBS A711 tablet has volume up/down keys connected to r_lradc. Add support for these keys.

---
 arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +20 -0
index 1e840ab5a541..6ecdc11b7059 100644
@@ -46,6 +46,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TBS A711 Tablet";
@@ -200,6 +201,25 @@
 	status = "okay";
 };
 
+&r_lradc {
+	vref-supply = <&reg_aldo2>;
+	status = "okay";
+
+	button@210 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <210000>;
+	};
+
+	button@410 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <410000>;
+	};
+};
+
 &r_rsb {
 	status = "okay";
 
Signature · 1 line
2.21.0