config: Update KP's imx53 HSC|DDC boards config to support SWUpdate
PATCH 1/1 config: Update KP's imx53 HSC|DDC boards config to support SWUpdate
This commit updates envs responsible for using USB perdrive as a tool for recovery / update.
Signed-off-by Lukasz Majewski <[email protected]>
---
include/configs/kp_imx53.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
include/configs/kp_imx53.h +5 -2
@@ -41,8 +41,9 @@"addinitrd=setenv bootargs ${bootargs} rdinit=${rdinit} ${debug} \0" \"upd_image=st.4k\0" \"uboot_file=u-boot.imx\0" \ -"updargs=setenv bootargs console=${console} ${smp}" \ -"rdinit=${rdinit} ${debug} ${displayargs}\0" \ +"updargs=setenv bootargs console=${console} ${smp} ${displayargs}\0" \ +"initrd_ram_dev=/dev/ram\0" \ +"addswupdate=setenv bootargs ${bootargs} root=${initrd_ram_dev} rw\0" \"loadusb=usb start; " \"fatload usb 0 ${loadaddr} ${upd_image}\0" \"up=if tftp ${loadaddr} ${uboot_file}; then " \
@@ -59,6 +60,8 @@"usbupd=echo Booting update from usb ...; " \"setenv bootargs; " \"run updargs; " \ +"run addinitrd; " \ +"run addswupdate; " \"run loadusb; " \"bootm ${loadaddr}#${fit_config}\0" \BOOTENV
Signature · 1 line
2.11.0