Fix RISU build for i386
cover Fix RISU build for i386
Hi all,
here's a patch series that tries to fix the (currently broken) build of RISU for i386. With the patches applied, I am able to successfully cross-compile and run RISU for i386 on my x86_64 laptop running Debian 10 with:
$ CC='cc -m32 -std=c99' LD='ld -m32' AS='nasm -f elf32' ARCH=i386 ./configure $ make $ ./risu --master --trace test_i386.trace test_i386.bin $ ./risu --trace test_i386.trace test_i386.bin
There's a couple of points that I'd like to mention/highlight:
1. Most of it is just moving stuff around, however I've implemented reginfo_dump_mismatch (based on reginfo_dump and code in other architectures) and defined EAX as the param register. There is no support for more registers yet, that will need to be added later.
2. Note the '-std=c99' switch in the command-line above; without it, GCC defines the symbol 'i386' to 1 and the preprocessor magic for including arch-specific headers in risu.h breaks. Does anyone have an idea how to fix this in a more robust way?
3. gas (the GNU assembler) chokes on the syntax of test_i386.s; that's why I'm using nasm as the assembler above. Is that intentional? I haven't found the nasm dependency mentioned anywhere.
Also, nasm will happily emit the UD1 opcode (0F B9) with no operands (see test_i386.s). That's a bit surprising to me, since Intel's Software Developer's Manual says UD1 has two operands; I'd expect at least a follow-up ModR/M byte. gas refuses to assemble UD1 with no operands, and gdb's disassembler gets confused when I load up the nasm's binary into risu. Is there something obvious that I'm missing?
Thanks,
-Jan Bobek
P.S. This is my first time using git send-email, so please bear with
me if something goes wrong and/or let me know how I can improve my future submissions. Thank you!
Jan Bobek (5):
risu_i386: move reginfo_t and related defines to risu_reginfo_i386.h
risu_i386: move reginfo-related code to risu_reginfo_i386.c
risu_reginfo_i386: implement arch-specific reginfo interface
risu_i386: implement missing CPU-specific functions
risu_i386: remove old unused code
risu_i386.c | 140 ++++++-------------------------------------- risu_reginfo_i386.c | 104 ++++++++++++++++++++++++++++++++ risu_reginfo_i386.h | 38 ++++++++++++ 3 files changed, 160 insertions(+), 122 deletions(-) create mode 100644 risu_reginfo_i386.c create mode 100644 risu_reginfo_i386.h
Signature · 1 line
2.20.1
PATCH 1/5 risu_i386: move reginfo_t and related defines to risu_reginfo_i386.h
In order to build risu successfully for i386, we need files risu_reginfo_i386.{h,c}; this patch adds the former by extracting the relevant code from risu_i386.c.
This patch is pure code motion; no functional changes were made.
--- risu_i386.c | 23 +---------------------- risu_reginfo_i386.h | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 22 deletions(-) create mode 100644 risu_reginfo_i386.h
risu_i386.c +1 -22
@@ -14,28 +14,7 @@#include <string.h> #include "risu.h" - -/* This is the data structure we pass over the socket. -* It is a simplified and reduced subset of what can -* be obtained with a ucontext_t* -*/ -struct reginfo { -uint32_t faulting_insn; -gregset_t gregs; -}; - -#ifndef REG_GS -/* Assume that either we get all these defines or none */ -#define REG_GS 0 -#define REG_FS 1 -#define REG_ES 2 -#define REG_DS 3 -#define REG_ESP 7 -#define REG_TRAPNO 12 -#define REG_EIP 14 -#define REG_EFL 16 -#define REG_UESP 17 -#endif +#include "risu_reginfo_i386.h" struct reginfo master_ri, apprentice_ri;
risu_reginfo_i386.h new file +37 -0
@@ -0,0 +1,37 @@ +/******************************************************************************* +* Copyright (c) 2010 Linaro Limited +* All rights reserved. This program and the accompanying materials +* are made available under the terms of the Eclipse Public License v1.0 +* which accompanies this distribution, and is available at +* http://www.eclipse.org/legal/epl-v10.html +* +* Contributors: +* Peter Maydell (Linaro) - initial implementation +******************************************************************************/ + +#ifndef RISU_REGINFO_I386_H +#define RISU_REGINFO_I386_H + +/* This is the data structure we pass over the socket. +* It is a simplified and reduced subset of what can +* be obtained with a ucontext_t* +*/ +struct reginfo { +uint32_t faulting_insn; +gregset_t gregs; +}; + +#ifndef REG_GS +/* Assume that either we get all these defines or none */ +# define REG_GS 0 +# define REG_FS 1 +# define REG_ES 2 +# define REG_DS 3 +# define REG_ESP 7 +# define REG_TRAPNO 12 +# define REG_EIP 14 +# define REG_EFL 16 +# define REG_UESP 17 +#endif /* !defined(REG_GS) */ + +#endif /* RISU_REGINFO_I386_H */
Signature · 1 line
2.20.1
Re: [Qemu-devel] [RISU PATCH 1/5] risu_i386: move reginfo_t and related defines to risu_reginfo_i386.h
Quoted 66 lines · Jan Bobek
In order to build risu successfully for i386, we need files risu_reginfo_i386.{h,c}; this patch adds the former by extracting the relevant code from
risu_i386.c.This patch is pure code motion; no functional changes were made.
Signed-off-by Jan Bobek <[email protected]>--- risu_i386.c | 23 +---------------------- risu_reginfo_i386.h | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 22 deletions(-) create mode 100644 risu_reginfo_i386.hrisu_i386.c +1
-22@@ -14,28 +14,7 @@#include <string.h> #include "risu.h" - -/* This is the data structure we pass over the socket. -* It is a simplified and reduced subset of what can -* be obtained with a ucontext_t* -*/ -struct reginfo { -uint32_t faulting_insn; -gregset_t gregs; -}; - -#ifndef REG_GS -/* Assume that either we get all these defines or none */ -#define REG_GS 0 -#define REG_FS 1 -#define REG_ES 2 -#define REG_DS 3 -#define REG_ESP 7 -#define REG_TRAPNO 12 -#define REG_EIP 14 -#define REG_EFL 16 -#define REG_UESP 17 -#endif +#include "risu_reginfo_i386.h" struct reginfo master_ri, apprentice_ri;risu_reginfo_i386.h new file +13
-0@@ -0,0 +1,37 @@ +/******************************************************************************* +* Copyright (c) 2010 Linaro Limited +* All rights reserved. This program and the accompanying materials +* are made available under the terms of the Eclipse Public License v1.0 +* which accompanies this distribution, and is available at +* http://www.eclipse.org/legal/epl-v10.html +* +* Contributors: +* Peter Maydell (Linaro) - initial implementation +******************************************************************************/ + +#ifndef RISU_REGINFO_I386_H +#define RISU_REGINFO_I386_H
risu_reginfo_i386.h line 23
Quoted 10 lines
risu_reginfo_i386.h new file +10
-0+ +/* This is the data structure we pass over the socket. +* It is a simplified and reduced subset of what can +* be obtained with a ucontext_t* +*/ +struct reginfo { +uint32_t faulting_insn; +gregset_t gregs; +}; +
The actual reg definitions can be dropped here (as rth does in his fixup series). We can get them from ucontext.
Otherwise:
Quoted 4 lines
risu_reginfo_i386.h new file +4
-0+#ifndef REG_GS +/* Assume that either we get all these defines or none */ +# define REG_GS 0 +# define REG_FS 1
risu_reginfo_i386.h line 37
Quoted 10 lines
risu_reginfo_i386.h new file +10
-0+# define REG_ES 2 +# define REG_DS 3 +# define REG_ESP 7 +# define REG_TRAPNO 12 +# define REG_EIP 14 +# define REG_EFL 16 +# define REG_UESP 17 +#endif /* !defined(REG_GS) */ + +#endif /* RISU_REGINFO_I386_H */
--
Alex Bennée
PATCH 2/5 risu_i386: move reginfo-related code to risu_reginfo_i386.c
In reply to Jan BobekIn order to build risu successfully for i386, we need files risu_reginfo_i386.{h,c}; this patch adds the latter by extracting the relevant code from risu_i386.c.
This patch is pure code motion; no functional changes were made.
--- risu_i386.c | 54 ----------------------------------- risu_reginfo_i386.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 54 deletions(-) create mode 100644 risu_reginfo_i386.c
risu_i386.c +0 -54
@@ -33,43 +33,6 @@ void advance_pc(void *vuc) uc->uc_mcontext.gregs[REG_EIP ] +=2 ; } -static void fill_reginfo (struct reginfo *ri,ucontext_t * uc) -{ -int i; -for (i =0 ; i <NGREG ; i++) { -switch (i) { -case REG_ESP : -case REG_UESP : -case REG_GS : -case REG_FS : -case REG_ES : -case REG_DS : -case REG_TRAPNO : -case REG_EFL : -/* Don't store these registers as it results in mismatches. -* In particular valgrind has different values for some -* segment registers, and they're boring anyway. -* We really shouldn't be ignoring EFL but valgrind doesn't -* seem to set it right and I don't care to investigate. -*/ - ri->gregs[i] =0xDEADBEEF ; -break ; -case REG_EIP : -/* Store the offset from the start of the test image */ - ri->gregs[i] = uc->uc_mcontext.gregs[i] - image_start_address; -break ; -default : - ri->gregs[i] = uc->uc_mcontext.gregs[i]; -break ; - } - } -/* x86 insns aren't 32 bit but we're not really testing x86 so -* this is just to distinguish 'do compare' from 'stop' -*/ - ri->faulting_insn = *((uint32_t *) uc->uc_mcontext.gregs[REG_EIP ]); -} - -int send_register_info (int sock,void *uc) {struct reginfo ri;
@@ -100,23 +63,6 @@ int recv_and_compare_register_info(int sock, void *uc)return resp; } -static char *regname[] = { -"GS" ,"FS" ,"ES" ,"DS" ,"EDI" ,"ESI" ,"EBP" ,"ESP" , -"EBX" ,"EDX" ,"ECX" ,"EAX" ,"TRAPNO" ,"ERR" ,"EIP" , -"CS" ,"EFL" ,"UESP" ,"SS" ,0 -}; - -static void dump_reginfo (struct reginfo *ri) -{ -int i; -fprintf (stderr," faulting insn %x\n" , ri->faulting_insn); -for (i =0 ; i <NGREG ; i++) { -fprintf (stderr," %s: %x\n" , regname[i] ? regname[i] :"???" , - ri->gregs[i]); - } -} - -/* Print a useful report on the status of the last comparison * done in recv_and_compare_register_info(). This is called on * exit, so need not restrict itself to signal-safe functions.
risu_reginfo_i386.c new file +68 -0
68 lines not on this page · raw message
Signature · 1 line
2.20.1
Re: [Qemu-devel] [RISU PATCH 2/5] risu_i386: move reginfo-related code to risu_reginfo_i386.c
Quoted 7 lines · Jan Bobek
In order to build risu successfully for i386, we need files risu_reginfo_i386.{h,c}; this patch adds the latter by extracting the relevant code from
risu_i386.c.This patch is pure code motion; no functional changes were made.
Signed-off-by Jan Bobek <[email protected]>
Quoted 142 lines
--- risu_i386.c | 54 ----------------------------------- risu_reginfo_i386.c | 68 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68 insertions(+), 54 deletions(-) create mode 100644 risu_reginfo_i386.crisu_i386.c +0
-54@@ -33,43 +33,6 @@ void advance_pc(void *vuc) uc->uc_mcontext.gregs[REG_EIP ] +=2 ; } -static void fill_reginfo (struct reginfo *ri,ucontext_t * uc) -{ -int i; -for (i =0 ; i <NGREG ; i++) { -switch (i) { -case REG_ESP : -case REG_UESP : -case REG_GS : -case REG_FS : -case REG_ES : -case REG_DS : -case REG_TRAPNO : -case REG_EFL : -/* Don't store these registers as it results in mismatches. -* In particular valgrind has different values for some -* segment registers, and they're boring anyway. -* We really shouldn't be ignoring EFL but valgrind doesn't -* seem to set it right and I don't care to investigate. -*/ - ri->gregs[i] =0xDEADBEEF ; -break ; -case REG_EIP : -/* Store the offset from the start of the test image */ - ri->gregs[i] = uc->uc_mcontext.gregs[i] - image_start_address; -break ; -default : - ri->gregs[i] = uc->uc_mcontext.gregs[i]; -break ; - } - } -/* x86 insns aren't 32 bit but we're not really testing x86 so -* this is just to distinguish 'do compare' from 'stop' -*/ - ri->faulting_insn = *((uint32_t *) uc->uc_mcontext.gregs[REG_EIP ]); -} - -int send_register_info (int sock,void *uc) {struct reginfo ri;@@ -100,23 +63,6 @@ int recv_and_compare_register_info(int sock, void *uc)return resp; } -static char *regname[] = { -"GS" ,"FS" ,"ES" ,"DS" ,"EDI" ,"ESI" ,"EBP" ,"ESP" , -"EBX" ,"EDX" ,"ECX" ,"EAX" ,"TRAPNO" ,"ERR" ,"EIP" , -"CS" ,"EFL" ,"UESP" ,"SS" ,0 -}; - -static void dump_reginfo (struct reginfo *ri) -{ -int i; -fprintf (stderr," faulting insn %x\n" , ri->faulting_insn); -for (i =0 ; i <NGREG ; i++) { -fprintf (stderr," %s: %x\n" , regname[i] ? regname[i] :"???" , - ri->gregs[i]); - } -} - -/* Print a useful report on the status of the last comparison * done in recv_and_compare_register_info(). This is called on * exit, so need not restrict itself to signal-safe functions. risu_reginfo_i386.c new file +58
-0@@ -0,0 +1,68 @@ +/******************************************************************************* +* Copyright (c) 2010 Linaro Limited +* All rights reserved. This program and the accompanying materials +* are made available under the terms of the Eclipse Public License v1.0 +* which accompanies this distribution, and is available at +* http://www.eclipse.org/legal/epl-v10.html +* +* Contributors: +* Peter Maydell (Linaro) - initial implementation +******************************************************************************/ + +#include <stdio.h> +#include <ucontext.h> + +#include "risu.h" +#include "risu_reginfo_i386.h" + +static void fill_reginfo (struct reginfo *ri,ucontext_t * uc) +{ +int i; +for (i =0 ; i <NGREG ; i++) { +switch (i) { +case REG_ESP : +case REG_UESP : +case REG_GS : +case REG_FS : +case REG_ES : +case REG_DS : +case REG_TRAPNO : +case REG_EFL : +/* Don't store these registers as it results in mismatches. +* In particular valgrind has different values for some +* segment registers, and they're boring anyway. +* We really shouldn't be ignoring EFL but valgrind doesn't +* seem to set it right and I don't care to investigate. +*/ + ri->gregs[i] =0xDEADBEEF ; +break ; +case REG_EIP : +/* Store the offset from the start of the test image */ + ri->gregs[i] = uc->uc_mcontext.gregs[i] - image_start_address; +break ; +default : + ri->gregs[i] = uc->uc_mcontext.gregs[i]; +break ; + } + } +/* x86 insns aren't 32 bit but we're not really testing x86 so +* this is just to distinguish 'do compare' from 'stop' +*/ + ri->faulting_insn = *((uint32_t *) uc->uc_mcontext.gregs[REG_EIP ]); +} + +static char *regname[] = { +"GS" ,"FS" ,"ES" ,"DS" ,"EDI" ,"ESI" ,"EBP" ,"ESP" , +"EBX" ,"EDX" ,"ECX" ,"EAX" ,"TRAPNO" ,"ERR" ,"EIP" , +"CS" ,"EFL" ,"UESP" ,"SS" ,0 +};
risu_reginfo_i386.c line 68
Quoted 10 lines
risu_reginfo_i386.c new file +10
-0+ +static void dump_reginfo (struct reginfo *ri) +{ +int i; +fprintf (stderr," faulting insn %x\n" , ri->faulting_insn); +for (i =0 ; i <NGREG ; i++) { +fprintf (stderr," %s: %x\n" , regname[i] ? regname[i] :"???" , + ri->gregs[i]); + } +}
--
Alex Bennée
PATCH 3/5 risu_reginfo_i386: implement arch-specific reginfo interface
In reply to Jan BobekCPU-specific code in risu_reginfo_* is expected to define and export the following symbols:
- arch_long_opts, arch_extra_help, process_arch_opt
- reginfo_size
- reginfo_init
- reginfo_is_eq
- reginfo_dump, reginfo_dump_mismatch
Make risu_reginfo_i386.c implement this interface.
--- risu_reginfo_i386.c | 48 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 6 deletions(-)
risu_reginfo_i386.c +42 -6
@@ -10,12 +10,28 @@******************************************************************************/ #include <stdio.h> +#include <stdlib.h> +#include <string.h> #include <ucontext.h> #include "risu.h" #include "risu_reginfo_i386.h" -static void fill_reginfo (struct reginfo *ri,ucontext_t * uc) +const struct option *const arch_long_opts; +const char *const arch_extra_help; + +void process_arch_opt (int opt,const char *arg) +{ +abort (); +} + +const int reginfo_size (void ) +{ +return sizeof (struct reginfo ); +} + +/* reginfo_init: initialize with a ucontext */ +void reginfo_init (struct reginfo *ri,ucontext_t *uc) {int i;for (i =0 ; i <NGREG ; i++) {
@@ -51,18 +67,38 @@ static void fill_reginfo(struct reginfo *ri, ucontext_t * uc) ri->faulting_insn = *((uint32_t *) uc->uc_mcontext.gregs[REG_EIP ]); } -static char *regname[] = { +/* reginfo_is_eq: compare the reginfo structs, returns nonzero if equal */ +int reginfo_is_eq (struct reginfo *m,struct reginfo *a) +{ +return 0 ==memcmp (m, a,sizeof (*m)); +} + +static const char *const regname[NGREG ] = {"GS" ,"FS" ,"ES" ,"DS" ,"EDI" ,"ESI" ,"EBP" ,"ESP" ,"EBX" ,"EDX" ,"ECX" ,"EAX" ,"TRAPNO" ,"ERR" ,"EIP" , -"CS" ,"EFL" ,"UESP" ,"SS" ,0 +"CS" ,"EFL" ,"UESP" ,"SS" }; -static void dump_reginfo (struct reginfo *ri) +/* reginfo_dump: print state to a stream, returns nonzero on success */ +int reginfo_dump (struct reginfo *ri,FILE *f) {int i; -fprintf (stderr," faulting insn %x\n" , ri->faulting_insn); +fprintf (f," faulting insn %x\n" , ri->faulting_insn);for (i =0 ; i <NGREG ; i++) { -fprintf (stderr," %s: %x\n" , regname[i] ? regname[i] :"???" , +fprintf (f," %s: %x\n" , regname[i] ? regname[i] :"???" , ri->gregs[i]); } +return !ferror (f); +} + +int reginfo_dump_mismatch (struct reginfo *m,struct reginfo *a,FILE *f) +{ +int i; +for (i =0 ; i <NGREG ; i++) { +if (m->gregs[i] != a->gregs[i]) { +fprintf (f,"Mismatch: Register %s\n" , regname[i] ? regname[i] :"???" ); +fprintf (f,"m: [%x] != a: [%x]\n" , m->gregs[i], a->gregs[i]); + } + } +return !ferror (f); }
Signature · 1 line
2.20.1
Re: [Qemu-devel] [RISU PATCH 3/5] risu_reginfo_i386: implement arch-specific reginfo interface
Quoted 9 lines · Jan Bobek
CPU-specific code in risu_reginfo_* is expected to define and export the following symbols:
-
arch_long_opts,arch_extra_help,process_arch_opt
-reginfo_size
-reginfo_init
-reginfo_is_eq
-reginfo_dump,reginfo_dump_mismatch
Quoted 3 lines
Make
risu_reginfo_i386.cimplement this interface.Signed-off-by Jan Bobek <[email protected]>
Quoted 72 lines
--- risu_reginfo_i386.c | 48 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 42 insertions(+), 6 deletions(-)risu_reginfo_i386.c +33
-6@@ -10,12 +10,28 @@******************************************************************************/ #include <stdio.h> +#include <stdlib.h> +#include <string.h> #include <ucontext.h> #include "risu.h" #include "risu_reginfo_i386.h" -static void fill_reginfo (struct reginfo *ri,ucontext_t * uc) +const struct option *const arch_long_opts; +const char *const arch_extra_help; + +void process_arch_opt (int opt,const char *arg) +{ +abort (); +} + +const int reginfo_size (void ) +{ +return sizeof (struct reginfo ); +} + +/* reginfo_init: initialize with a ucontext */ +void reginfo_init (struct reginfo *ri,ucontext_t *uc) {int i;for (i =0 ; i <NGREG ; i++) {@@ -51,18 +67,38 @@ static void fill_reginfo(struct reginfo *ri, ucontext_t * uc) ri->faulting_insn = *((uint32_t *) uc->uc_mcontext.gregs[REG_EIP ]); } -static char *regname[] = { +/* reginfo_is_eq: compare the reginfo structs, returns nonzero if equal */ +int reginfo_is_eq (struct reginfo *m,struct reginfo *a) +{ +return 0 ==memcmp (m, a,sizeof (*m)); +} + +static const char *const regname[NGREG ] = {"GS" ,"FS" ,"ES" ,"DS" ,"EDI" ,"ESI" ,"EBP" ,"ESP" ,"EBX" ,"EDX" ,"ECX" ,"EAX" ,"TRAPNO" ,"ERR" ,"EIP" , -"CS" ,"EFL" ,"UESP" ,"SS" ,0 +"CS" ,"EFL" ,"UESP" ,"SS" }; -static void dump_reginfo (struct reginfo *ri) +/* reginfo_dump: print state to a stream, returns nonzero on success */ +int reginfo_dump (struct reginfo *ri,FILE *f) {int i; -fprintf (stderr," faulting insn %x\n" , ri->faulting_insn); +fprintf (f," faulting insn %x\n" , ri->faulting_insn);for (i =0 ; i <NGREG ; i++) { -fprintf (stderr," %s: %x\n" , regname[i] ? regname[i] :"???" , +fprintf (f," %s: %x\n" , regname[i] ? regname[i] :"???" , ri->gregs[i]); } +return !ferror (f); +} + +int reginfo_dump_mismatch (struct reginfo *m,struct reginfo *a,FILE *f)
risu_reginfo_i386.c static void fill_reginfo(struct reginfo *ri, ucontext_t * uc) · line 104
Quoted 10 lines
risu_reginfo_i386.c +9
-0+{ +int i; +for (i =0 ; i <NGREG ; i++) { +if (m->gregs[i] != a->gregs[i]) { +fprintf (f,"Mismatch: Register %s\n" , regname[i] ? regname[i] :"???" ); +fprintf (f,"m: [%x] != a: [%x]\n" , m->gregs[i], a->gregs[i]); + } + } +return !ferror (f); }
--
Alex Bennée
PATCH 4/5 risu_i386: implement missing CPU-specific functions
In reply to Jan Bobekrisu_i386.c is expected to implement the following functions:
- advance_pc
- get_reginfo_paramreg, set_ucontext_paramreg
- get_risuop
- get_pc
This patch adds the necessary code. (We use EAX as the parameter register.)
--- risu_i386.c | 31 ++++++++++++++++++++++++++++++- risu_reginfo_i386.h | 1 + 2 files changed, 31 insertions(+), 1 deletion(-)
risu_i386.c +30 -1
@@ -25,14 +25,43 @@ static int insn_is_ud2(uint32_t insn)void advance_pc (void *vuc) { +ucontext_t *uc = (ucontext_t *) vuc; +/* We assume that this is either UD1 or UD2. * This would need tweaking if we want to test * expected undefs on x86. */ -ucontext_t *uc = vuc; uc->uc_mcontext.gregs[REG_EIP ] +=2 ; } +void set_ucontext_paramreg (void *vuc,uint64_t value) +{ +ucontext_t *uc = (ucontext_t *) vuc; + uc->uc_mcontext.gregs[REG_EAX ] = (uint32_t ) value; +} + +uint64_t get_reginfo_paramreg (struct reginfo *ri) +{ +return ri->gregs[REG_EAX ]; +} + +int get_risuop (struct reginfo *ri) +{ +switch (ri->faulting_insn &0xffff ) { +case 0xb90f :/* UD1 */ +return OP_COMPARE ; +case 0x0b0f :/* UD2 */ +return OP_TESTEND ; +default :/* unexpected */ +return -1 ; + } +} + +uintptr_t get_pc (struct reginfo *ri) +{ +return ri->gregs[REG_EIP ]; +} +int send_register_info (int sock,void *uc) {struct reginfo ri;
risu_reginfo_i386.h +1 -0
@@ -28,6 +28,7 @@ struct reginfo {# define REG_ES 2# define REG_DS 3# define REG_ESP 7 +# define REG_EAX 11# define REG_TRAPNO 12# define REG_EIP 14# define REG_EFL 16
Signature · 1 line
2.20.1
PATCH 5/5 risu_i386: remove old unused code
In reply to Jan BobekThe code being removed is a remnant of the past implementation; it has since been replaced by its more powerful, architecture-independent counterpart in reginfo.c.
--- risu_i386.c | 58 ----------------------------------------------------- 1 file changed, 58 deletions(-)
risu_i386.c +0 -58
@@ -16,13 +16,6 @@#include "risu.h" #include "risu_reginfo_i386.h" -struct reginfo master_ri, apprentice_ri; - -static int insn_is_ud2 (uint32_t insn) -{ -return ((insn &0xffff ) ==0x0b0f ); -} -void advance_pc (void *vuc) {ucontext_t *uc = (ucontext_t *) vuc;
@@ -61,54 +54,3 @@ uintptr_t get_pc(struct reginfo *ri) {return ri->gregs[REG_EIP ]; } - -int send_register_info (int sock,void *uc) -{ -struct reginfo ri; -fill_reginfo (&ri, uc); -return send_data_pkt (sock, &ri,sizeof (ri)); -} - -/* Read register info from the socket and compare it with that from the -* ucontext. Return 0 for match, 1 for end-of-test, 2 for mismatch. -* NB: called from a signal handler. -*/ -int recv_and_compare_register_info (int sock,void *uc) -{ -int resp; -fill_reginfo (&master_ri, uc); -recv_data_pkt (sock, &apprentice_ri,sizeof (apprentice_ri)); -if (memcmp (&master_ri, &apprentice_ri,sizeof (master_ri)) !=0 ) { -/* mismatch */ - resp =2 ; - }else if (insn_is_ud2 (master_ri.faulting_insn)) { -/* end of test */ - resp =1 ; - }else { -/* either successful match or expected undef */ - resp =0 ; - } -send_response_byte (sock, resp); -return resp; -} - -/* Print a useful report on the status of the last comparison -* done in recv_and_compare_register_info(). This is called on -* exit, so need not restrict itself to signal-safe functions. -* Should return 0 if it was a good match (ie end of test) -* and 1 for a mismatch. -*/ -int report_match_status (void ) -{ -fprintf (stderr,"match status...\n" ); -fprintf (stderr,"master reginfo:\n" ); -dump_reginfo (&master_ri); -fprintf (stderr,"apprentice reginfo:\n" ); -dump_reginfo (&apprentice_ri); -if (memcmp (&master_ri, &apprentice_ri,sizeof (master_ri)) ==0 ) { -fprintf (stderr,"match!\n" ); -return 0 ; - } -fprintf (stderr,"mismatch!\n" ); -return 1 ; -}
Signature · 1 line
2.20.1
Re: [Qemu-devel] [RISU PATCH 5/5] risu_i386: remove old unused code
Quoted 5 lines · Jan Bobek
The code being removed is a remnant of the past implementation; it has since been replaced by its more powerful, architecture-independent counterpart in
reginfo.c.Signed-off-by Jan Bobek <[email protected]>
Quoted 67 lines
--- risu_i386.c | 58 ----------------------------------------------------- 1 file changed, 58 deletions(-)risu_i386.c +0
-48@@ -16,13 +16,6 @@#include "risu.h" #include "risu_reginfo_i386.h" -struct reginfo master_ri, apprentice_ri; - -static int insn_is_ud2 (uint32_t insn) -{ -return ((insn &0xffff ) ==0x0b0f ); -} -void advance_pc (void *vuc) {ucontext_t *uc = (ucontext_t *) vuc;@@ -61,54 +54,3 @@ uintptr_t get_pc(struct reginfo *ri) {return ri->gregs[REG_EIP ]; } - -int send_register_info (int sock,void *uc) -{ -struct reginfo ri; -fill_reginfo (&ri, uc); -return send_data_pkt (sock, &ri,sizeof (ri)); -} - -/* Read register info from the socket and compare it with that from the -* ucontext. Return 0 for match, 1 for end-of-test, 2 for mismatch. -* NB: called from a signal handler. -*/ -int recv_and_compare_register_info (int sock,void *uc) -{ -int resp; -fill_reginfo (&master_ri, uc); -recv_data_pkt (sock, &apprentice_ri,sizeof (apprentice_ri)); -if (memcmp (&master_ri, &apprentice_ri,sizeof (master_ri)) !=0 ) { -/* mismatch */ - resp =2 ; - }else if (insn_is_ud2 (master_ri.faulting_insn)) { -/* end of test */ - resp =1 ; - }else { -/* either successful match or expected undef */ - resp =0 ; - } -send_response_byte (sock, resp); -return resp; -} - -/* Print a useful report on the status of the last comparison -* done in recv_and_compare_register_info(). This is called on -* exit, so need not restrict itself to signal-safe functions. -* Should return 0 if it was a good match (ie end of test) -* and 1 for a mismatch. -*/ -int report_match_status (void ) -{ -fprintf (stderr,"match status...\n" ); -fprintf (stderr,"master reginfo:\n" );
risu_i386.c uintptr_t get_pc(struct reginfo *ri) · line 114
Quoted 10 lines
risu_i386.c +0
-10-dump_reginfo (&master_ri); -fprintf (stderr,"apprentice reginfo:\n" ); -dump_reginfo (&apprentice_ri); -if (memcmp (&master_ri, &apprentice_ri,sizeof (master_ri)) ==0 ) { -fprintf (stderr,"match!\n" ); -return 0 ; - } -fprintf (stderr,"mismatch!\n" ); -return 1 ; -}
--
Alex Bennée
Quoted 4 lines · Jan Bobek
1. Most of it is just moving stuff around, however I've implemented
reginfo_dump_mismatch(based onreginfo_dumpand code in other architectures) and defined EAX as the param register. There is no support for more registers yet, that will need to be added later.
It's probably worthwhile to get x86_64 working at the same time. This isn't too difficult -- see below.
Quoted 4 lines
2. Note the '-std=c99' switch in the command-line above; without it, GCC defines the symbol 'i386' to 1 and the preprocessor magic for including arch-specific headers in
risu.hbreaks. Does anyone have an idea how to fix this in a more robust way?
Adding -U$(ARCH) to the command line is probably as good a fix as any.
Quoted 3 lines
3. gas (the GNU assembler) chokes on the syntax of test_i386.s; that's why I'm using nasm as the assembler above. Is that intentional? I haven't found the nasm dependency mentioned anywhere.
I think rewriting to not require nasm is better.
I'm not sure why it was done this way. Perhaps Peter's unfamiliarity with x86 assembler, combined with the fact that the Intel manual is not in AT&T syntax?
In any case...
Quoted 7 lines
Also, nasm will happily emit the UD1 opcode (0F B9) with no operands (see test_i386.s). That's a bit surprising to me, since Intel's Software Developer's Manual says UD1 has two operands; I'd expect at least a follow-up ModR/M byte. gas refuses to assemble UD1 with no operands, and gdb's disassembler gets confused when I load up the nasm's binary into risu. Is there something obvious that I'm missing?
You are not missing anything -- ud1 should require a modrm byte.
My suggestion is to use only UD1 as the "break" insn, with the different OP_* codes encoded into the modrm byte. E.g.
void advance_pc(void *vuc)
{
ucontext_t *uc = (ucontext_t *) vuc;
/*
* We assume that this is UD1 as per get_risuop below.
* This would need tweaking if we want to test expected undefs.
*/
uc->uc_mcontext.gregs[REG_E(IP)] += 3;
}int get_risuop(struct reginfo *ri)
{
if ((ri->faulting_insn & 0xf8ffff) == 0xc0b90f) { /* UD1 %xxx,%eax */
return (ri->faulting_insn >> 16) & 7;
}
return -1;
}This leads to:
I ENUM INSN 0 OP_COMPARE ud1 %eax,%eax 1 OP_TESTEND ud1 %ecx,%eax 2 OP_SETMEMBLOCK ud1 %edx,%eax 3 OP_GETMEMBLOCK ud1 %ebx,%eax 4 OP_COMPAREMEM ud1 %esp,%eax
Quoted 3 lines
P.S. This is my first time using git send-email, so please bear with
me if something goes wrong and/or let me know how I can improve my future submissions. Thank you!
You've done well with git send-email. ;-)
The following set of changes Works For Me for i386 and x86_64. For clarity(?), I've included diff from master and diff on top of your patch set.
r~
Makefile +4 -1
@@ -17,7 +17,7 @@ VPATH=$(SRCDIR) CFLAGS ?= -g -ALL_CFLAGS = -Wall -D_GNU_SOURCE -DARCH=$(ARCH) $(BUILD_INC) $(CFLAGS) $(EXTRA_CFLAGS) +ALL_CFLAGS = -Wall -D_GNU_SOURCE -DARCH=$(ARCH) -U$(ARCH) $(BUILD_INC) $(CFLAGS) $(EXTRA_CFLAGS) PROG=risu SRCS=risu.c comms.c reginfo.c risu_$(ARCH).c risu_reginfo_$(ARCH).c
@@ -49,6 +49,9 @@ $(PROG): $(OBJS) %_$(ARCH).elf: %_$(ARCH).s $(AS) -o $@ $< +%_$(ARCH).elf: %_$(ARCH).S + $(CC) $(CPPFLAGS) -o $@ -c $< + clean: rm -f $(PROG) $(OBJS) $(BINS)
risu_reginfo_i386.h +11 -14
@@ -12,7 +12,8 @@#ifndef RISU_REGINFO_I386_H #define RISU_REGINFO_I386_H -/* This is the data structure we pass over the socket. +/* +* This is the data structure we pass over the socket. * It is a simplified and reduced subset of what can * be obtained with a ucontext_t* */
@@ -21,18 +22,14 @@ struct reginfo { gregset_t gregs; }; -#ifndef REG_GS -/* Assume that either we get all these defines or none */ -# define REG_GS 0 -# define REG_FS 1 -# define REG_ES 2 -# define REG_DS 3 -# define REG_ESP 7 -# define REG_EAX 11 -# define REG_TRAPNO 12 -# define REG_EIP 14 -# define REG_EFL 16 -# define REG_UESP 17 -#endif /* !defined(REG_GS) */ +/* +* For i386, the defines are named REG_EAX, etc. +* For x86_64, the defines are name REG_RAX, etc. +*/ +#ifdef __x86_64__ +# define REG_E (X ) REG_R##X +#else +# define REG_E (X ) REG_E##X +#endif #endif /* RISU_REGINFO_I386_H */
risu_i386.c +10 -14
@@ -20,37 +20,33 @@ void advance_pc(void *vuc) {ucontext_t *uc = (ucontext_t *) vuc; -/* We assume that this is either UD1 or UD2. -* This would need tweaking if we want to test -* expected undefs on x86. +/* +* We assume that this is UD1 as per get_risuop below. +* This would need tweaking if we want to test expected undefs. */ - uc->uc_mcontext.gregs[REG_EIP ] +=2 ; + uc->uc_mcontext.gregs[REG_E (IP )] +=3 ; }void set_ucontext_paramreg (void *vuc,uint64_t value) {ucontext_t *uc = (ucontext_t *) vuc; - uc->uc_mcontext.gregs[REG_EAX ] = (uint32_t ) value; + uc->uc_mcontext.gregs[REG_E (AX )] = value; }uint64_t get_reginfo_paramreg (struct reginfo *ri) { -return ri->gregs[REG_EAX ]; +return ri->gregs[REG_E (AX )]; }int get_risuop (struct reginfo *ri) { -switch (ri->faulting_insn &0xffff ) { -case 0xb90f :/* UD1 */ -return OP_COMPARE ; -case 0x0b0f :/* UD2 */ -return OP_TESTEND ; -default :/* unexpected */ -return -1 ; +if ((ri->faulting_insn &0xf8ffff ) ==0xc0b90f ) {/* UD1 %xxx,%eax */ +return (ri->faulting_insn >>16 ) &7 ; } +return -1 ; }uintptr_t get_pc (struct reginfo *ri) { -return ri->gregs[REG_EIP ]; +return ri->gregs[REG_E (IP )]; }
risu_reginfo_i386.c +78 -29
148 lines not on this page · raw message
configure +6 -4
@@ -48,12 +48,14 @@ EOF } guess_arch() { - if check_define __m68k__ ; then - ARCH="m68k" + if check_define __aarch64__ ; then + ARCH="aarch64" elif check_define __arm__ ; then ARCH="arm" - elif check_define __aarch64__ ; then - ARCH="aarch64" + elif check_define __i386__ || check_define __x86_64__ ; then + ARCH="i386" + elif check_define __m68k__ ; then + ARCH="m68k" elif check_define __powerpc64__ ; then ARCH="ppc64" else
test_i386.S new file +41 -0
41 lines not on this page · raw message
test_i386.s deleted +0 -27
@@ -1,27 +0,0 @@ -;############################################################################### -;# Copyright (c) 2010 Linaro Limited -;# All rights reserved. This program and the accompanying materials -;# are made available under the terms of the Eclipse Public License v1.0 -;# which accompanies this distribution, and is available at -;# http://www.eclipse.org/legal/epl-v10.html -;# -;# Contributors: -;# Peter Maydell (Linaro) - initial implementation -;############################################################################### - -; A trivial test image for x86 - -BITS 32 -; Initialise the registers to avoid spurious mismatches -mov eax, 0x12345678 -mov ebx, 0x9abcdef0 -mov ecx, 0x97361234 -mov edx, 0x84310284 -mov edi, 0x83624173 -mov esi, 0xfaebfaeb -mov ebp, 0x84610123 -; UD1 : do compare -UD1 - -; UD2 : exit test -UD2
Makefile +4 -1
@@ -17,7 +17,7 @@ VPATH=$(SRCDIR) CFLAGS ?= -g -ALL_CFLAGS = -Wall -D_GNU_SOURCE -DARCH=$(ARCH) $(BUILD_INC) $(CFLAGS) $(EXTRA_CFLAGS) +ALL_CFLAGS = -Wall -D_GNU_SOURCE -DARCH=$(ARCH) -U$(ARCH) $(BUILD_INC) $(CFLAGS) $(EXTRA_CFLAGS) PROG=risu SRCS=risu.c comms.c reginfo.c risu_$(ARCH).c risu_reginfo_$(ARCH).c
@@ -49,6 +49,9 @@ $(PROG): $(OBJS) %_$(ARCH).elf: %_$(ARCH).s $(AS) -o $@ $< +%_$(ARCH).elf: %_$(ARCH).S + $(CC) $(CPPFLAGS) -o $@ -c $< + clean: rm -f $(PROG) $(OBJS) $(BINS)
risu_reginfo_i386.h new file +35 -0
@@ -0,0 +1,35 @@ +/******************************************************************************* +* Copyright (c) 2010 Linaro Limited +* All rights reserved. This program and the accompanying materials +* are made available under the terms of the Eclipse Public License v1.0 +* which accompanies this distribution, and is available at +* http://www.eclipse.org/legal/epl-v10.html +* +* Contributors: +* Peter Maydell (Linaro) - initial implementation +******************************************************************************/ + +#ifndef RISU_REGINFO_I386_H +#define RISU_REGINFO_I386_H + +/* +* This is the data structure we pass over the socket. +* It is a simplified and reduced subset of what can +* be obtained with a ucontext_t* +*/ +struct reginfo { +uint32_t faulting_insn; +gregset_t gregs; +}; + +/* +* For i386, the defines are named REG_EAX, etc. +* For x86_64, the defines are name REG_RAX, etc. +*/ +#ifdef __x86_64__ +# define REG_E (X ) REG_R##X +#else +# define REG_E (X ) REG_E##X +#endif + +#endif /* RISU_REGINFO_I386_H */
risu_i386.c +24 -132
171 lines not on this page · raw message
risu_reginfo_i386.c new file +153 -0
153 lines not on this page · raw message
configure +6 -4
@@ -48,12 +48,14 @@ EOF } guess_arch() { - if check_define __m68k__ ; then - ARCH="m68k" + if check_define __aarch64__ ; then + ARCH="aarch64" elif check_define __arm__ ; then ARCH="arm" - elif check_define __aarch64__ ; then - ARCH="aarch64" + elif check_define __i386__ || check_define __x86_64__ ; then + ARCH="i386" + elif check_define __m68k__ ; then + ARCH="m68k" elif check_define __powerpc64__ ; then ARCH="ppc64" else
test_i386.S new file +41 -0
41 lines not on this page · raw message
test_i386.s deleted +0 -27
@@ -1,27 +0,0 @@ -;############################################################################### -;# Copyright (c) 2010 Linaro Limited -;# All rights reserved. This program and the accompanying materials -;# are made available under the terms of the Eclipse Public License v1.0 -;# which accompanies this distribution, and is available at -;# http://www.eclipse.org/legal/epl-v10.html -;# -;# Contributors: -;# Peter Maydell (Linaro) - initial implementation -;############################################################################### - -; A trivial test image for x86 - -BITS 32 -; Initialise the registers to avoid spurious mismatches -mov eax, 0x12345678 -mov ebx, 0x9abcdef0 -mov ecx, 0x97361234 -mov edx, 0x84310284 -mov edi, 0x83624173 -mov esi, 0xfaebfaeb -mov ebp, 0x84610123 -; UD1 : do compare -UD1 - -; UD2 : exit test -UD2
Sorry for the delayed reply, the U.S. tax deadline has caught up with me, so I spent the last two evenings doing my taxes. (Yuck!)
Anyway...
Quoted 7 lines · Richard Henderson
Quoted 4 lines · Jan Bobek
2. Note the '-std=c99' switch in the command-line above; without it, GCC defines the symbol 'i386' to 1 and the preprocessor magic for including arch-specific headers in
risu.hbreaks. Does anyone have an idea how to fix this in a more robust way?Adding -U$(ARCH) to the command line is probably as good a fix as any.
I didn't know about -U, nice!
Quoted 5 lines
Quoted 3 lines
3. gas (the GNU assembler) chokes on the syntax of test_i386.s; that's why I'm using nasm as the assembler above. Is that intentional? I haven't found the nasm dependency mentioned anywhere.
I think rewriting to not require nasm is better.
Agreed.
Quoted 8 lines
Quoted 7 lines
Also, nasm will happily emit the UD1 opcode (0F B9) with no operands (see test_i386.s). That's a bit surprising to me, since Intel's Software Developer's Manual says UD1 has two operands; I'd expect at least a follow-up ModR/M byte. gas refuses to assemble UD1 with no operands, and gdb's disassembler gets confused when I load up the nasm's binary into risu. Is there something obvious that I'm missing?
Quoted 4 lines
You are not missing anything -- ud1 should require a modrm byte.
My suggestion is to use only UD1 as the "break" insn, with the different OP_* codes encoded into the modrm byte.
I had to laugh when I read this; this is *exactly* what I had in mind, but then I found out there was no ModR/M byte.
Quoted 5 lines
Quoted 3 lines
P.S. This is my first time using git send-email, so please bear with
me if something goes wrong and/or let me know how I can improve my future submissions. Thank you!You've done well with git send-email. ;-)
Thanks a lot! :)
-Jan
Quoted 2 lines · Jan Bobek
Hi all,
<snip>
Quoted 6 lines
Thanks,
-Jan Bobek
P.S. This is my first time using git send-email, so please bear with
me if something goes wrong and/or let me know how I can improve my future submissions. Thank you!
Looks good to me. Excellent first patch series ;-)
I assume you'll post a v2 once you've integrated Richard's fixups to the appropriate patches.
Have you had a chance to look at getting a .risu and risugen working yet?
--
Alex Bennée
Hi Alex,
I'm very sorry for the late reply, your emails got mixed up with everything else in qemu-devel; I didn't setup my mail filters very well (my bad).
Quoted 6 lines · Alex Bennée
Quoted 2 lines · Jan Bobek
Hi all,
<snip>
Quoted 8 lines
Quoted 6 lines
Thanks,
-Jan Bobek
P.S. This is my first time using git send-email, so please bear with
me if something goes wrong and/or let me know how I can improve my future submissions. Thank you!Looks good to me. Excellent first patch series ;-)
Thank you :) And thanks a lot for the review!
Quoted 2 lines
I assume you'll post a v2 once you've integrated Richard's fixups to the appropriate patches.
Sounds reasonable, I'll get that done.
Quoted 1 line
Have you had a chance to look at getting a .risu and risugen working yet?
That's early work-in-progress as we speak (also, I'm picking up Perl...).
Thanks again,
-Jan