configs: pine64_sopine: Bump to the linux kernel 5.0
PATCH 1/13 configs: pine64_sopine: Bump to the linux kernel 5.0
This bumps to linux/linux-headers 5.0
--- configs/pine64_sopine_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/pine64_sopine_defconfig +3 -3
@@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -31,7 +31,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/pine64/sopine/boot.cmd" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-sopine-baseboard"
Signature · 1 line
2.11.0
PATCH 2/13 configs: pine64_sopine: Bump to u-boot version 2019.01
--- configs/pine64_sopine_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/pine64_sopine_defconfig +1 -1
@@ -17,7 +17,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sopine_baseboard" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
Signature · 1 line
2.11.0
PATCH 3/13 configs: orangepi_prime: Bump to the linux kernel 5.0
In reply to Shyam SainiThis bumps to linux/linux-headers 5.0
--- configs/orangepi_prime_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/orangepi_prime_defconfig +3 -3
@@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -31,7 +31,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-prime/boot.cmd" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-prime"
Signature · 1 line
2.11.0
PATCH 4/13 configs: orangepi_prime: Bump to u-boot version 2019.01
In reply to Shyam Saini--- configs/orangepi_prime_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/orangepi_prime_defconfig +1 -1
@@ -17,7 +17,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_prime" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
Signature · 1 line
2.11.0
PATCH 5/13 configs: olimex_a64_olinuxino: Bump to the linux kernel 5.0
In reply to Shyam SainiThis bumps to linux/linux-headers 5.0
--- configs/olimex_a64_olinuxino_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/olimex_a64_olinuxino_defconfig +3 -3
@@ -2,8 +2,8 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.14 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
@@ -31,7 +31,7 @@ BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/olimex/a64-olinuxino/boot.cmd" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-olinuxino"
Signature · 1 line
2.11.0
PATCH 6/13 configs: olimex_a64_olinuxino: Bump to u-boot version 2019.01
In reply to Shyam Saini--- configs/olimex_a64_olinuxino_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/olimex_a64_olinuxino_defconfig +1 -1
@@ -17,7 +17,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="a64-olinuxino" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
Signature · 1 line
2.11.0
PATCH 7/13 configs: orangepi_plus: Bump to the linux kernel 5.0
In reply to Shyam SainiThis bumps to linux/linux-headers 5.0
--- configs/orangepi_plus_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/orangepi_plus_defconfig +3 -3
@@ -3,8 +3,8 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # System configuration BR2_TARGET_GENERIC_HOSTNAME="OrangePi_Plus"
@@ -23,7 +23,7 @@ BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-orangepi-plus"
Signature · 1 line
2.11.0
PATCH 8/13 configs: orangepi_plus: Bump to u-boot version 2019.01
In reply to Shyam Saini--- configs/orangepi_plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/orangepi_plus_defconfig +1 -1
@@ -14,7 +14,7 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the Orange Pi Plus" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.05" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_plus" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
Signature · 1 line
2.11.0
PATCH 9/13 board: friendlyarm: nanopi-m1-plus: patches: Remove linux patch
In reply to Shyam SainiPrior to linux v4.13, there was no support for Nanopi M1 Plus so we used a custom device tree patch file for this puspose. In the preceeding patch, linux is bumped to newer version which has support for the board in question and thus makes this patch file obselete. So lets drop it.
--- ...ts-nanopi-m1-plus-add-dts-to-linux-4.11.5.patch | 103 --------------------- 1 file changed, 103 deletions(-) delete mode 100644 board/friendlyarm/nanopi-m1-plus/patches/linux/0001-ARM-dts-nanopi-m1-plus-add-dts-to-linux-4.11.5.patch
board/friendlyarm/nanopi-m1-plus/patches/linux/0001-ARM-dts-nanopi-m1-plus-add-dts-to-linux-4.11.5.patch deleted +0 -103
@@ -1,103 +0,0 @@ -From 4ec28d4e1040b94c66e97aa77071c9ef3478f022 Mon Sep 17 00:00:00 2001 -From: Chakra Divi <[email protected]> -Date: Thu, 6 Jul 2017 18:22:35 +0530 -Subject: [PATCH] ARM: dts: nanopi-m1-plus : add dts to linux 4.11.5 - -This patch is used to add nanopi-m1-plus dts -file in linux source code helps to add nanopi-m1-plus -board support in buildroot and is part of the linux -main-line ; refer to the below link for info -[https://patchwork.kernel.org/patch/9755033] - -Signed-off-by: Chakra Divi <[email protected]> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts | 64 +++++++++++++++++++++++++ - 2 files changed, 65 insertions(+) - create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 0118084..928e5d3 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -867,6 +867,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-beelink-x2.dtb \ - sun8i-h3-nanopi-m1.dtb \ -+ sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-orangepi-2.dtb \ - sun8i-h3-orangepi-lite.dtb \ -diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts -new file mode 100644 -index 0000000..8ddd1b2 ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1-plus.dts -@@ -0,0 +1,64 @@ -+/* -+ * Copyright (C) 2017 Jagan Teki <[email protected]> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include "sun8i-h3-nanopi.dtsi" -+ -+/ { -+ model = "FriendlyArm NanoPi M1 Plus"; -+ compatible = "friendlyarm,nanopi-m1-plus", "allwinner,sun8i-h3"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&ehci2 { -+ status = "okay"; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&ohci2 { -+ status = "okay"; -+}; --- -1.7.9.5 -
Signature · 1 line
2.11.0
PATCH 9/13 board: friendlyarm: nanopi-m1-plus: patches: Remove linux patch
Hello,
Quoted 4 lines · On Mon, 8 Apr 2019 20:40:53 +0530 Shyam Saini…
Prior to linux v4.13, there was no support for Nanopi M1 Plus so we used a custom device tree patch file for this puspose. In the preceeding patch, linux is bumped to newer version which has support for the board in question and thus makes this patch file obselete. So lets drop it.
There is no "preceeding patch" that bumps the Linux version. It's PATCH 12/13 that does this, i.e afterwards. This means your series is not
bisectable: if I apply up to PATCH 09/13 included, but not the rest of the series, the build of the defconfig is broken.
This change must be squashed into the patch updating the defconfig.
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 10/13 configs: nanopi_m1: Bump to the linux kernel 5.0
In reply to Shyam SainiThis bumps to linux/linux-headers 5.0
--- configs/nanopi_m1_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/nanopi_m1_defconfig +3 -3
@@ -3,8 +3,8 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # System configuration BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1"
@@ -24,7 +24,7 @@ BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-m1"
Signature · 1 line
2.11.0
PATCH 11/13 configs: nanopi_m1: Bump to u-boot version 2019.01
In reply to Shyam Saini--- configs/nanopi_m1_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/nanopi_m1_defconfig +1 -1
@@ -14,7 +14,7 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
Signature · 1 line
2.11.0
PATCH 12/13 configs: nanopi_m1_plus: Bump to the linux kernel 5.0
In reply to Shyam SainiThis bumps to linux/linux-headers 5.0
--- configs/nanopi_m1_plus_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
configs/nanopi_m1_plus_defconfig +3 -3
@@ -3,8 +3,8 @@ BR2_arm=y BR2_cortex_a7=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.11 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y +# Linux headers same as kernel, a 5.0 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y # System configuration BR2_TARGET_GENERIC_HOSTNAME="nanopi-m1-plus"
@@ -24,7 +24,7 @@ BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-m1-plus/patches/" BR2_LINUX_KERNEL_DEFCONFIG="sunxi" BR2_LINUX_KERNEL_DTS_SUPPORT=y
Signature · 1 line
2.11.0
PATCH 12/13 configs: nanopi_m1_plus: Bump to the linux kernel 5.0
Hello,
configs/nanopi_m1_plus_defconfig BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin" · line 28
Quoted 5 lines · On Mon, 8 Apr 2019 20:40:56 +0530 Shyam Saini…
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=yconfigs/nanopi_m1_plus_defconfig +1
-1-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0" BR2_GLOBAL_PATCH_DIR="board/friendlyarm/nanopi-m1-plus/patches/"
This option is no longer needed once the patch is removed (see your PATCH 09/13).
Best regards,
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
PATCH 13/13 configs: nanopi_m1_plus: Bump to u-boot version 2019.01
In reply to Shyam Saini--- configs/nanopi_m1_plus_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
configs/nanopi_m1_plus_defconfig +1 -1
@@ -14,7 +14,7 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi M1 Plus" BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07" +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01" BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi_m1_plus" BR2_TARGET_UBOOT_NEEDS_DTC=y BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
Signature · 1 line
2.11.0
PATCH 1/13 configs: pine64_sopine: Bump to the linux kernel 5.0
In reply to Shyam SainiHello,
Quoted 3 lines · On Mon, 8 Apr 2019 20:40:45 +0530 Shyam Saini…
This bumps to linux/linux-headers 5.0
Signed-off-by Shyam Saini <[email protected]>
Please send one patch per defconfig. Splitting the Linux and U-Boot update in separate patches is really excessive.
Thanks!
Thomas
Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com