Skip to contentSkip to conversation

small cleanup and fixes

PATCH In review Bruce Richardson 3 participants 10 messages Apr 9, 2019 – Apr 17, 2019

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v2 cover small cleanup and fixes

Made some small changes to meson to shorten the code and increase readability. While testing, found a number of issues on FreeBSD builds, which are fixed in this set too.

Bruce Richardson (5):
build: simplify subdirectory detection for EAL
build: increase readability via shortcut variables
distributor: skip building if power library not found examples/l2fwd-cat: fix build on FreeBSD devtools/test-meson-builds: fix support for FreeBSD

 app/meson.build                          |  2 +-
 buildtools/meson.build                   |  2 +-
 config/meson.build                       | 21 +++++++++++++++++----
 config/x86/meson.build                   |  2 +-
 devtools/test-meson-builds.sh            |  5 ++++-
 doc/guides/contributing/coding_style.rst |  2 +-
 drivers/bus/dpaa/meson.build             |  2 +-
 drivers/bus/fslmc/meson.build            |  2 +-
 drivers/bus/pci/meson.build              |  2 +-
 drivers/bus/vmbus/meson.build            |  2 +-
 drivers/common/dpaax/meson.build         |  2 +-
 drivers/crypto/caam_jr/meson.build       |  2 +-
 drivers/crypto/ccp/meson.build           |  2 +-
 drivers/crypto/dpaa2_sec/meson.build     |  2 +-
 drivers/crypto/dpaa_sec/meson.build      |  2 +-
 drivers/crypto/octeontx/meson.build      |  2 +-
 drivers/event/dpaa/meson.build           |  2 +-
 drivers/event/dpaa2/meson.build          |  2 +-
 drivers/mempool/dpaa/meson.build         |  2 +-
 drivers/mempool/dpaa2/meson.build        |  2 +-
 drivers/meson.build                      |  2 +-
 drivers/net/af_packet/meson.build        |  2 +-
 drivers/net/avp/meson.build              |  2 +-
 drivers/net/axgbe/meson.build            |  2 +-
 drivers/net/dpaa/meson.build             |  2 +-
 drivers/net/dpaa2/meson.build            |  2 +-
 drivers/net/enetc/meson.build            |  2 +-
 drivers/net/failsafe/meson.build         |  2 +-
 drivers/net/nfp/meson.build              |  2 +-
 drivers/net/softnic/meson.build          |  2 +-
 drivers/net/tap/meson.build              |  2 +-
 drivers/net/vdev_netvsc/meson.build      |  2 +-
 drivers/net/virtio/meson.build           |  2 +-
 examples/distributor/meson.build         |  3 +++
 examples/l2fwd-cat/cat.c                 |  2 +-
 examples/l3fwd-power/meson.build         |  2 +-
 examples/meson.build                     |  2 +-
 examples/tep_termination/meson.build     |  2 +-
 examples/vdpa/meson.build                |  4 ++--
 examples/vhost/meson.build               |  2 +-
 examples/vhost_scsi/meson.build          |  2 +-
 kernel/meson.build                       |  2 +-
 lib/librte_eal/meson.build               | 17 ++---------------
 lib/librte_eventdev/meson.build          |  2 +-
 lib/librte_kni/meson.build               |  2 +-
 lib/librte_power/meson.build             |  2 +-
 lib/librte_vhost/meson.build             |  2 +-
 lib/meson.build                          |  4 ++--
 48 files changed, 72 insertions(+), 66 deletions(-)
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/5 build: simplify subdirectory detection for EAL

Within EAL we had a series of if statements for selecting the EAL directory to use. Now that the directory names match those of the OS's they are for we can instead just use a generated subdirectory name, shortening the code. To avoid strange errors, we still need to check for unsupported OS's, but do this check up-front in the config meson.build file.

---
 config/meson.build         |  7 +++++++
 lib/librte_eal/meson.build | 17 ++---------------
 2 files changed, 9 insertions(+), 15 deletions(-)
config/meson.build +7 -0
index 483139b10..ce6af2595 100644
@@ -1,6 +1,13 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2019 Intel Corporation
 
+# check the OS is supported, rather than going any further
+supported_exec_envs = ['freebsd', 'linux', 'windows']
+exec_env = host_machine.system()
+if not supported_exec_envs.contains(exec_env)
+	error('unsupported system type "@0@"'.format(exec_env))
+endif
+
 # set the major version, which might be used by drivers and libraries
 # depending on the configuration options
 pver = meson.project_version().split('.')
lib/librte_eal/meson.build +2 -15
index 1863622c0..fa36b20e0 100644
@@ -9,21 +9,8 @@ subdir('common') # defines common_sources, common_objs, etc.
 
 # Now do OS/exec-env specific settings, including building kernel modules
 # The <exec-env>/eal/meson.build file should define env_sources, etc.
-if host_machine.system() == 'linux'
-	dpdk_conf.set('RTE_EXEC_ENV_LINUX', 1)
-	subdir('linux/eal')
-
-elif host_machine.system() == 'freebsd'
-	dpdk_conf.set('RTE_EXEC_ENV_FREEBSD', 1)
-	subdir('freebsd/eal')
-
-elif host_machine.system() == 'windows'
-	dpdk_conf.set('RTE_EXEC_ENV_WINDOWS', 1)
-	subdir('windows/eal')
-
-else
-	error('unsupported system type "@0@"'.format(host_machine.system()))
-endif
+dpdk_conf.set('RTE_EXEC_ENV_' + exec_env.to_upper(), 1)
+subdir(exec_env + '/eal')
 
 version = 10  # the version of the EAL API
 allow_experimental_apis = true
Signature · 1 line
2.20.1
Acked-by on v2 1/5
#2 lore raw

Re: [dpdk-dev] [PATCH v2 1/5] build: simplify subdirectory detection for EAL

Quoted 13 lines · Bruce Richardson

Within EAL we had a series of if statements for selecting the EAL directory
to use. Now that the directory names match those of the OS's they are for
we can instead just use a generated subdirectory name, shortening the code.
To avoid strange errors, we still need to check for unsupported OS's, but
do this check up-front in the config meson.build file.

Signed-off-by: Bruce Richardson <
[email protected]

Quoted 1 line
Quoted 7 lines

Reviewed-by: David Marchand <
[email protected]

Quoted 1 line
---
 config/meson.build         |  7 +++++++
 lib/librte_eal/meson.build | 17 ++---------------
 2 files changed, 9 insertions(+), 15 deletions(-)
Signature · 2 lines
Kind regards,
Luca Boccassi
#3 lore raw

PATCH v2 2/5 build: increase readability via shortcut variables

In reply to Bruce Richardson

Define variables for "is_linux", "is_freebsd" and "is_windows" to make the code shorter for comparisons and more readable.

---
 app/meson.build                          |  2 +-
 buildtools/meson.build                   |  2 +-
 config/meson.build                       | 14 ++++++++++----
 config/x86/meson.build                   |  2 +-
 doc/guides/contributing/coding_style.rst |  2 +-
 drivers/bus/dpaa/meson.build             |  2 +-
 drivers/bus/fslmc/meson.build            |  2 +-
 drivers/bus/pci/meson.build              |  2 +-
 drivers/bus/vmbus/meson.build            |  2 +-
 drivers/common/dpaax/meson.build         |  2 +-
 drivers/crypto/caam_jr/meson.build       |  2 +-
 drivers/crypto/ccp/meson.build           |  2 +-
 drivers/crypto/dpaa2_sec/meson.build     |  2 +-
 drivers/crypto/dpaa_sec/meson.build      |  2 +-
 drivers/crypto/octeontx/meson.build      |  2 +-
 drivers/event/dpaa/meson.build           |  2 +-
 drivers/event/dpaa2/meson.build          |  2 +-
 drivers/mempool/dpaa/meson.build         |  2 +-
 drivers/mempool/dpaa2/meson.build        |  2 +-
 drivers/meson.build                      |  2 +-
 drivers/net/af_packet/meson.build        |  2 +-
 drivers/net/avp/meson.build              |  2 +-
 drivers/net/axgbe/meson.build            |  2 +-
 drivers/net/dpaa/meson.build             |  2 +-
 drivers/net/dpaa2/meson.build            |  2 +-
 drivers/net/enetc/meson.build            |  2 +-
 drivers/net/failsafe/meson.build         |  2 +-
 drivers/net/nfp/meson.build              |  2 +-
 drivers/net/softnic/meson.build          |  2 +-
 drivers/net/tap/meson.build              |  2 +-
 drivers/net/vdev_netvsc/meson.build      |  2 +-
 drivers/net/virtio/meson.build           |  2 +-
 examples/l3fwd-power/meson.build         |  2 +-
 examples/meson.build                     |  2 +-
 examples/tep_termination/meson.build     |  2 +-
 examples/vdpa/meson.build                |  4 ++--
 examples/vhost/meson.build               |  2 +-
 examples/vhost_scsi/meson.build          |  2 +-
 kernel/meson.build                       |  2 +-
 lib/librte_eventdev/meson.build          |  2 +-
 lib/librte_kni/meson.build               |  2 +-
 lib/librte_power/meson.build             |  2 +-
 lib/librte_vhost/meson.build             |  2 +-
 lib/meson.build                          |  4 ++--
 44 files changed, 55 insertions(+), 49 deletions(-)
app/meson.build +1 -1
index e949624b7..2b9fdef74 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2019 Intel Corporation
 
-if host_machine.system() == 'windows'
+if is_windows
 	subdir_done()
 endif
 
buildtools/meson.build +1 -1
index 0209bec8f..0d3a42c01 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2019 Intel Corporation
 
-if host_machine.system() == 'windows'
+if is_windows
 	subdir_done()
 endif
 
config/meson.build +10 -4
index ce6af2595..f8aded6ed 100644
@@ -8,6 +8,12 @@ if not supported_exec_envs.contains(exec_env)
 	error('unsupported system type "@0@"'.format(exec_env))
 endif
 
+# define a handy variable for checking which OS we have.
+# gives us "is_windows", "is_freebsd" and "is_linux"
+foreach env:supported_exec_envs
+	set_variable('is_' + env, exec_env == env)
+endforeach
+
 # set the major version, which might be used by drivers and libraries
 # depending on the configuration options
 pver = meson.project_version().split('.')
@@ -95,9 +101,9 @@ if cc.find_library('libm', required : false).found()
 endif
 
 # for linux link against dl, for bsd execinfo
-if host_machine.system() == 'linux'
+if is_linux
 	link_lib = 'dl'
-elif host_machine.system() == 'freebsd'
+elif is_freebsd
 	link_lib = 'execinfo'
 else
 	link_lib = ''
@@ -120,7 +126,7 @@ if numa_dep.found() and cc.has_header('numaif.h')
 endif
 
 # check for strlcpy
-if host_machine.system() == 'linux'
+if is_linux
 	libbsd = dependency('libbsd', required: false)
 	if libbsd.found()
 		dpdk_conf.set('RTE_USE_LIBBSD', 1)
@@ -175,4 +181,4 @@ dpdk_conf.set_quoted('RTE_EAL_PMD_PATH', eal_pmd_path)
 install_headers('rte_config.h', subdir: get_option('include_subdir_arch'))
 
 # enable VFIO only if it is linux OS
-dpdk_conf.set('RTE_EAL_VFIO', host_machine.system() == 'linux')
+dpdk_conf.set('RTE_EAL_VFIO', is_linux)
config/x86/meson.build +1 -1
index 558edfda9..2b2d06281 100644
@@ -5,7 +5,7 @@
 march_opt = ['-march=@0@'.format(machine)]
 
 # get binutils version for the workaround of Bug 97
-if host_machine.system() != 'windows'
+if not is_windows
 	ldver = run_command('ld', '-v').stdout().strip()
 	if ldver.contains('2.30')
 		if cc.has_argument('-mno-avx512f')
doc/guides/contributing/coding_style.rst +1 -1
index 656563dde..a5d5897f3 100644
@@ -856,7 +856,7 @@ build
 
 .. code-block:: python
 
-	if host_machine.system() != 'linux'
+	if not is_linux
 	        build = false
 	endif
 
drivers/bus/dpaa/meson.build +1 -1
index 1fcb4e913..1c8ca8c9a 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/bus/fslmc/meson.build +1 -1
index 4b0521577..04624c363 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/bus/pci/meson.build +1 -1
index a3140ff97..a312ecc03 100644
@@ -8,7 +8,7 @@ install_headers('rte_bus_pci.h')
 sources = files('pci_common.c',
 	'pci_common_uio.c',
 	'pci_params.c')
-if host_machine.system() == 'linux'
+if is_linux
 	sources += files('linux/pci.c',
 			'linux/pci_uio.c',
 			'linux/pci_vfio.c')
drivers/bus/vmbus/meson.build +1 -1
index 0e4d058ee..9fd430dae 100644
@@ -11,7 +11,7 @@ sources = files('vmbus_common.c',
 		'vmbus_bufring.c',
 		'vmbus_common_uio.c')
 
-if host_machine.system() == 'linux'
+if is_linux
 	sources += files('linux/vmbus_bus.c',
 			'linux/vmbus_uio.c')
 	includes += include_directories('linux')
drivers/common/dpaax/meson.build +1 -1
index 98a1bdd48..78378e2a6 100644
@@ -3,7 +3,7 @@
 
 allow_experimental_apis = true
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/crypto/caam_jr/meson.build +1 -1
index 99b71aef1..e61a13c25 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/crypto/ccp/meson.build +1 -1
index 915c4c854..071ccc5e7 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Advanced Micro Devices, Inc. All rights reserved.
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 dep = dependency('libcrypto', required: false)
drivers/crypto/dpaa2_sec/meson.build +1 -1
index 8fa4827ed..d197cda1a 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/crypto/dpaa_sec/meson.build +1 -1
index 8a5709846..134af88da 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/crypto/octeontx/meson.build +1 -1
index 423737ee1..a9f2d3157 100644
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Cavium, Inc
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 
drivers/event/dpaa/meson.build +1 -1
index 0914f858e..11b1fe669 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += ['pmd_dpaa']
drivers/event/dpaa2/meson.build +1 -1
index a0db6fc21..a94bc5643 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += ['bus_vdev', 'pmd_dpaa2', 'pmd_dpaa2_sec']
drivers/mempool/dpaa/meson.build +1 -1
index 9163b3db3..c4c8ebc09 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/mempool/dpaa2/meson.build +1 -1
index 6b6ead617..9a8b28d7c 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/meson.build +1 -1
index 7520a16e3..4c444f495 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2019 Intel Corporation
 
-if host_machine.system() == 'windows'
+if is_windows
 	subdir_done()
 endif
 
drivers/net/af_packet/meson.build +1 -1
index 92f6a9715..92c306c73 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 sources = files('rte_eth_af_packet.c')
drivers/net/avp/meson.build +1 -1
index b7ffdfc80..8138cb22d 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 sources = files('avp_ethdev.c')
drivers/net/axgbe/meson.build +1 -1
index 548ffff7a..6decb25d4 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright (c) 2018 Advanced Micro Devices, Inc. All rights reserved.
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 
drivers/net/dpaa/meson.build +1 -1
index 62dec7b04..8e5418bd6 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += ['mempool_dpaa']
drivers/net/dpaa2/meson.build +1 -1
index 53e1d8189..a0ea99238 100644
@@ -3,7 +3,7 @@
 
 version = 2
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 
drivers/net/enetc/meson.build +1 -1
index 733156bbf..7d0c2ffe7 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 NXP
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 
drivers/net/failsafe/meson.build +1 -1
index a249ff4af..dfd4067cb 100644
@@ -5,7 +5,7 @@ cflags += '-std=gnu99'
 cflags += '-D_DEFAULT_SOURCE'
 cflags += '-D_XOPEN_SOURCE=700'
 cflags += '-pedantic'
-if host_machine.system() == 'linux'
+if is_linux
 	cflags += '-DLINUX'
 else
 	cflags += '-DBSD'
drivers/net/nfp/meson.build +1 -1
index ba6a22e8b..ea51ac3c3 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 sources = files('nfpcore/nfp_cpp_pcie_ops.c',
drivers/net/softnic/meson.build +1 -1
index da249c068..dd1d610ea 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 allow_experimental_apis = true
drivers/net/tap/meson.build +1 -1
index 9cb7142a0..c407a1f35 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright 2018 Luca Boccassi <[email protected]>
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 sources = files(
drivers/net/vdev_netvsc/meson.build +1 -1
index d3ada878a..6655859f8 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Luca Boccassi <[email protected]>
 
-if host_machine.system() != 'linux'
+if not is_linux
         build = false
 endif
 sources = files('vdev_netvsc.c')
drivers/net/virtio/meson.build +1 -1
index e43ce6bbc..794905401 100644
@@ -15,7 +15,7 @@ elif arch_subdir == 'arm' and host_machine.cpu_family().startswith('aarch64')
 	sources += files('virtio_rxtx_simple_neon.c')
 endif
 
-if host_machine.system() == 'linux'
+if is_linux
 	dpdk_conf.set('RTE_VIRTIO_USER', 1)
 
 	sources += files('virtio_user_ethdev.c',
examples/l3fwd-power/meson.build +1 -1
index a3c5c2f14..2c84123b6 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 allow_experimental_apis = true
examples/meson.build +1 -1
index d72382fca..e4babf6bf 100644
@@ -36,7 +36,7 @@ foreach example: examples
 	ext_deps = [execinfo]
 	includes = [include_directories(example)]
 	deps = ['eal', 'mempool', 'net', 'mbuf', 'ethdev', 'cmdline']
-	if host_machine.system() == 'windows'
+	if is_windows
 		deps = ['eal'] # only supported lib on Windows currently
 	endif
 	subdir(example)
examples/tep_termination/meson.build +1 -1
index 6d3636243..a75cc7100 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += ['hash', 'vhost']
examples/vdpa/meson.build +2 -2
index 2e38a069f..73f129cd9 100644
@@ -6,11 +6,11 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += 'vhost'
 allow_experimental_apis = true
 sources = files(
 	'main.c'
-)
\ No newline at end of file
+)
examples/vhost/meson.build +1 -1
index 7b498076c..872d51153 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 deps += 'vhost'
examples/vhost_scsi/meson.build +1 -1
index ca1248023..2e9339aa7 100644
@@ -6,7 +6,7 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 
kernel/meson.build +1 -1
index 2c8fa76d0..b247e2df4 100644
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-subdir(host_machine.system())
+subdir(exec_env)
lib/librte_eventdev/meson.build +1 -1
index 6becfe86d..6cfe60e1f 100644
@@ -4,7 +4,7 @@
 version = 6
 allow_experimental_apis = true
 
-if host_machine.system() == 'linux'
+if is_linux
 	cflags += '-DLINUX'
 else
 	cflags += '-DBSD'
lib/librte_kni/meson.build +1 -1
index 055ae1227..400af9a4d 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-if host_machine.system() != 'linux' or not dpdk_conf.get('RTE_ARCH_64')
+if not is_linux or not dpdk_conf.get('RTE_ARCH_64')
 	build = false
 endif
 version = 2
lib/librte_power/meson.build +1 -1
index 02e0337ce..cc6c30075 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 sources = files('rte_power.c', 'power_acpi_cpufreq.c',
lib/librte_vhost/meson.build +1 -1
index e33e6fc16..3090bbe08 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2018 Intel Corporation
 
-if host_machine.system() != 'linux'
+if not is_linux
 	build = false
 endif
 if has_libnuma == 1
lib/meson.build +2 -2
index 595314d7d..a379dd682 100644
@@ -30,7 +30,7 @@ libraries = [
 	# flow_classify lib depends on pkt framework table lib
 	'flow_classify', 'bpf', 'telemetry']
 
-if host_machine.system() == 'windows'
+if is_windows
 	libraries = ['kvargs','eal'] # only supported libraries for windows
 endif
 
@@ -123,7 +123,7 @@ foreach l:libraries
 					meson.current_source_dir(), dir_name, name)
 			exports = []
 			implib = dir_name + '.dll.a'
-			if host_machine.system() == 'windows'
+			if is_windows
 				exports = '@0@/@1@/rte_@2@_exports.def'.format(
 					meson.current_source_dir(), dir_name, name)
 				lk_args = ['-Wl,/def:' + exports, '-Wl,/implib:lib\\' + implib]
Signature · 1 line
2.20.1
#4 lore raw

PATCH v2 3/5 distributor: skip building if power library not found

In reply to Bruce Richardson

The power library is not built on non-Linux systems, so skip the distributor sample if it's not found, as it's a mandatory dependency.

---
 examples/distributor/meson.build | 3 +++
 1 file changed, 3 insertions(+)
examples/distributor/meson.build +3 -0
index 8cf2ca1da..26f108d65 100644
@@ -6,6 +6,9 @@
 # To build this example as a standalone application with an already-installed
 # DPDK instance, use 'make'
 
+# require the power library
+build = dpdk_conf.has('RTE_LIBRTE_POWER')
+
 deps += ['distributor', 'power']
 sources = files(
 	'main.c'
Signature · 1 line
2.20.1
#5 lore raw

PATCH v2 4/5 examples/l2fwd-cat: fix build on FreeBSD

In reply to Bruce Richardson

The definition of CPU_AND differs from Linux to BSD, so we need to use RTE_CPU_AND instead.

Fixes f6baccbc2b3b ("examples/l2fwd-cat: add sample application for PQoS CAT and CDP")

---
Note: for backporting to stable, this relies on c3568ea37670 also being backported to the release in question

---
 examples/l2fwd-cat/cat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
examples/l2fwd-cat/cat.c +1 -1
index a6081e676..502c6b327 100644
@@ -345,7 +345,7 @@ check_cpus_overlapping(void)
 
 	for (i = 0; i < m_config_count; i++) {
 		for (j = i + 1; j < m_config_count; j++) {
-			CPU_AND(&mask,
+			RTE_CPU_AND(&mask,
 				&m_config[i].cpumask,
 				&m_config[j].cpumask);
 
Signature · 1 line
2.20.1
#6 lore raw

PATCH v2 5/5 devtools/test-meson-builds: fix support for FreeBSD

In reply to Bruce Richardson

The pipefile option does not seem to exist on FreeBSD, giving an error when running the script.

Fixes 5d9176673008 ("devtools: fix meson build test to exit on failure")

---
V2: change "==" to "=" in comparison

---
 devtools/test-meson-builds.sh | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
devtools/test-meson-builds.sh +4 -1
index b3b5cfbb5..dce9a3d89 100755
@@ -7,7 +7,10 @@
 # * if a build-directory already exists we assume it was properly configured
 # Run ninja after configuration is done.
 
-set -o pipefail
+# this option gives an error on BSD
+if [ "`uname`" = "Linux" ] ; then
+	set -o pipefail
+fi
 
 srcdir=$(dirname $(readlink -f $0))/..
 MESON=${MESON:-meson}
Signature · 1 line
2.20.1
#7 lore raw

Re: [dpdk-dev] [PATCH v2 5/5] devtools/test-meson-builds: fix support for FreeBSD

09/04/2019 12:55, Bruce Richardson:

devtools/test-meson-builds.sh line 13

Quoted 7 lines
devtools/test-meson-builds.sh +4 -1
-set -o pipefail
+# this option gives an error on BSD
+if [ "`uname`" = "Linux" ] ; then
+	set -o pipefail
+fi

I think this is a bash option.
We may require bash at the top of this script as a workaround. Or we can revert the inital patch piping to cat for verbose mode.

#8 lore raw

Re: [dpdk-dev] [PATCH v2 5/5] devtools/test-meson-builds: fix support for FreeBSD

Quoted 13 lines · Thomas Monjalon

09/04/2019 12:55, Bruce Richardson:

devtools/test-meson-builds.sh line 13

Quoted 7 lines
devtools/test-meson-builds.sh +4 -1
-set -o pipefail
+# this option gives an error on BSD
+if [ "`uname`" = "Linux" ] ; then
+	set -o pipefail
+fi

I think this is a bash option.
We may require bash at the top of this script as a workaround. Or we can revert the inital patch piping to cat for verbose mode.

Probably best to do the latter, I think. No real need to have two verbose modes, just one. Let me see what I can do, if there may be any other options.

/Bruce

#9 lore raw
In reply to Bruce Richardson

09/04/2019 12:55, Bruce Richardson:

Quoted 10 lines

Made some small changes to meson to shorten the code and increase readability. While testing, found a number of issues on FreeBSD builds, which are fixed in this set too.

Bruce Richardson (5):
build: simplify subdirectory detection for EAL
build: increase readability via shortcut variables
distributor: skip building if power library not found examples/l2fwd-cat: fix build on FreeBSD devtools/test-meson-builds: fix support for FreeBSD

Applied without last patch, thanks.