arm: socfpga: stack and Kconfig cleanups
Subsystems (3)
v4 cover arm: socfpga: stack and Kconfig cleanups
This series cleans up stack definitions in socfpga_common.h as well as cleans up defconfig files by implying/defaulting common things in Kconfig files.
Finally, it reduces the malloc pool size used in first stage of gen5 SPL (without ddr available) in order to have more space available for code.
As this series does not contain direct bugfixes, it targets the socfpga-next branch.
Note that this series is meant for socfpga-next but depends on the generic series "spl: full-featured heap cleanups" from:
https://patchwork.ozlabs.org/project/uboot/list/?series=99561
Changes in v4:
- make this patch 2/4 work without changing a10 heap allocation strategy (as the series doing that has been rejected)
- adapt to socfpga-next
Changes in v3:
- removed patch 2/5 from v2 (moved to patchwork #1067366, series #99561)
- adapt to socfpge-next: imply USE_TINY_PRINTF only for gen5 & a10, not s10
- adapt to socfpga-next
Changes in v2:
- fix commit message: "SPL post-reloc", not "SPL pre-reloc"
- added patch to imply/default common config options
- added patch to reduce gen5 SPL initial malloc pool to 2 KiB
Simon Goldschmidt (4):
arm: socfpga: fix comment about SPL memory layout
arm: socfpga: put initial U-Boot stack into DDR
arm: socfpga: imply/default common config options
arm: socfpga: gen5: reduce SPL pre-reloc malloc
arch/arm/Kconfig | 2 ++ arch/arm/mach-socfpga/Kconfig | 23 ++++++++++++ configs/socfpga_arria10_defconfig | 6 ---- configs/socfpga_arria5_defconfig | 10 ------ configs/socfpga_cyclone5_defconfig | 10 ------ configs/socfpga_dbm_soc1_defconfig | 10 ------ configs/socfpga_de0_nano_soc_defconfig | 10 ------ configs/socfpga_de10_nano_defconfig | 10 ------ configs/socfpga_de1_soc_defconfig | 10 ------ configs/socfpga_is1_defconfig | 8 ----- configs/socfpga_sockit_defconfig | 10 ------ configs/socfpga_socrates_defconfig | 10 ------ configs/socfpga_sr1500_defconfig | 10 ------ configs/socfpga_stratix10_defconfig | 2 -- configs/socfpga_vining_fpga_defconfig | 10 ------ include/configs/socfpga_common.h | 48 ++++++++++++-------------- 16 files changed, 48 insertions(+), 141 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/4 arm: socfpga: fix comment about SPL memory layout
The comment about SPL memory layout for socfpga gen5 is outdated: the initial malloc memory is now at the end of the SRAM, gd is below it (see board_init_f_alloc_reserve).
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
include/configs/socfpga_common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
include/configs/socfpga_common.h +3 -3
@@ -236,9 +236,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);* * 0xFFFF_0000 ...... Start of SRAM * 0xFFFF_xxxx ...... Top of stack (grows down) -* 0xFFFF_yyyy ...... Malloc area -* 0xFFFF_zzzz ...... Global Data -* 0xFFFF_FF00 ...... End of SRAM +* 0xFFFF_yyyy ...... Global Data +* 0xFFFF_zzzz ...... Malloc area +* 0xFFFF_FFFF ...... End of SRAM * * SRAM Memory layout for Arria 10: * 0xFFE0_0000 ...... Start of SRAM (bottom)
Signature · 1 line
2.17.1
PATCH v4 1/4 arm: socfpga: fix comment about SPL memory layout
Quoted 22 lines · Simon Goldschmidt
The comment about SPL memory layout for socfpga gen5 is outdated: the initial malloc memory is now at the end of the SRAM, gd is below it (see
board_init_f_alloc_reserve).Signed-off-by Simon Goldschmidt <[email protected]>---
Changes in v4: None
Changes in v3: None
Changes in v2: Noneinclude/configs/socfpga_common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)include/configs/socfpga_common.h +0
-0@@ -236,9 +236,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);* * 0xFFFF_0000 ...... Start of SRAM
include/configs/socfpga_common.h unsigned int cm_get_qspi_controller_clk_hz(void); · line 244
Quoted 10 lines
include/configs/socfpga_common.h +3
-3* 0xFFFF_xxxx ...... Top of stack (grows down) -* 0xFFFF_yyyy ...... Malloc area -* 0xFFFF_zzzz ...... Global Data -* 0xFFFF_FF00 ...... End of SRAM +* 0xFFFF_yyyy ...... Global Data +* 0xFFFF_zzzz ...... Malloc area +* 0xFFFF_FFFF ...... End of SRAM * * SRAM Memory layout for Arria 10: * 0xFFE0_0000 ...... Start of SRAM (bottom)
Signature · 2 lines
Best regards, Marek Vasut
PATCH v4 2/4 arm: socfpga: put initial U-Boot stack into DDR
In reply to Simon GoldschmidtIf SPL post-reloc stage puts the stack into DDR, U-Boot should be able to do that, too.
The reason to do so is that this way, U-Boot initial stack can be larger than SPL initial stack. In situations where we want to save the SPL in SRAM for next boot without reloading, this prevents overwriting the SPL DTB in SRAM if U-Boot stack usage gets too high.
To achieve this, the malloc definition for a10 is moved up and sligthly changed to ensure CONFIG_SYS_INIT_RAM_SIZE is the remaining available size.
---
Changes in v4:
- make this patch 2/4 work without changing a10 heap allocation strategy (as the series doing that has been rejected)
Changes in v3:
- removed patch 2/5 from v2 (moved to patchwork #1067366, series #99561)
Changes in v2:
- fix commit message: "SPL post-reloc", not "SPL pre-reloc"
include/configs/socfpga_common.h | 42 +++++++++++++++----------------- 1 file changed, 20 insertions(+), 22 deletions(-)
include/configs/socfpga_common.h +20 -22
@@ -26,7 +26,13 @@#define CONFIG_SYS_INIT_RAM_SIZE 0x10000#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x40000/* 256KB */ +/* SPL memory allocation configuration, this is for FAT implementation */ +#ifndef CONFIG_SYS_SPL_MALLOC_SIZE +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000 +#endif +#define CONFIG_SYS_INIT_RAM_SIZE (0x40000 - CONFIG_SYS_SPL_MALLOC_SIZE) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE)#endif /*
@@ -38,12 +44,23 @@#if ((CONFIG_SYS_BOOTCOUNT_ADDR >CONFIG_SYS_INIT_RAM_ADDR ) && \ (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR + \CONFIG_SYS_INIT_RAM_SIZE ))) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_BOOTCOUNT_ADDR +#define CONFIG_SPL_STACK CONFIG_SYS_BOOTCOUNT_ADDR#else -#define CONFIG_SYS_INIT_SP_ADDR \ +#define CONFIG_SPL_STACK \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)#endif +/* +* U-Boot stack setup: if SPL post-reloc uses DDR stack, use it in pre-reloc +* phase of U-Boot, too. This prevents overwriting SPL data if stack/heap usage +* in U-Boot pre-reloc is higher than in SPL. +*/ +#if defined(CONFIG_SPL_STACK_R_ADDR ) &&CONFIG_SPL_STACK_R_ADDR +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK_R_ADDR +#else +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK +#endif +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1/*
@@ -252,16 +269,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE#endif -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 ) -/* SPL memory allocation configuration, this is for FAT implementation */ -#ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#endif -#endif -/* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FS_FAT ) || defined(CONFIG_SPL_FS_EXT4 )
@@ -292,15 +299,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#endif #endif -/* -* Stack setup -*/ -#if defined(CONFIG_TARGET_SOCFPGA_GEN5 ) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10 ) -#define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START -#endif -/* Extra Environment */ #ifndef CONFIG_SPL_BUILD
Signature · 1 line
2.17.1
PATCH v4 2/4 arm: socfpga: put initial U-Boot stack into DDR
Quoted 96 lines · Simon Goldschmidt
If SPL post-reloc stage puts the stack into DDR, U-Boot should be able to do that, too.
The reason to do so is that this way, U-Boot initial stack can be larger than SPL initial stack. In situations where we want to save the SPL in SRAM for next boot without reloading, this prevents overwriting the SPL DTB in SRAM if U-Boot stack usage gets too high.
To achieve this, the malloc definition for a10 is moved up and sligthly changed to ensure
CONFIG_SYS_INIT_RAM_SIZEis the remaining available size.Signed-off-by Simon Goldschmidt <[email protected]>---
Changes in v4:
- make this patch 2/4 work without changing a10 heap allocation strategy (as the series doing that has been rejected)Changes in v3:
- removed patch 2/5 from v2 (moved to patchwork #1067366, series #99561)Changes in v2:
- fix commit message: "SPL post-reloc", not "SPL pre-reloc"include/configs/socfpga_common.h | 42 +++++++++++++++----------------- 1 file changed, 20 insertions(+), 22 deletions(-)include/configs/socfpga_common.h +20
-15@@ -26,7 +26,13 @@#define CONFIG_SYS_INIT_RAM_SIZE 0x10000#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10 )#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x40000/* 256KB */ +/* SPL memory allocation configuration, this is for FAT implementation */ +#ifndef CONFIG_SYS_SPL_MALLOC_SIZE +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x10000 +#endif +#define CONFIG_SYS_INIT_RAM_SIZE (0x40000 - CONFIG_SYS_SPL_MALLOC_SIZE) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE)#endif /* @@ -38,12 +44,23 @@#if ((CONFIG_SYS_BOOTCOUNT_ADDR >CONFIG_SYS_INIT_RAM_ADDR ) && \ (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR + \CONFIG_SYS_INIT_RAM_SIZE ))) -#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_BOOTCOUNT_ADDR +#define CONFIG_SPL_STACK CONFIG_SYS_BOOTCOUNT_ADDR#else -#define CONFIG_SYS_INIT_SP_ADDR \ +#define CONFIG_SPL_STACK \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)#endif +/* +* U-Boot stack setup: if SPL post-reloc uses DDR stack, use it in pre-reloc +* phase of U-Boot, too. This prevents overwriting SPL data if stack/heap usage +* in U-Boot pre-reloc is higher than in SPL. +*/ +#if defined(CONFIG_SPL_STACK_R_ADDR ) &&CONFIG_SPL_STACK_R_ADDR +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK_R_ADDR +#else +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK +#endif +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1/* @@ -252,16 +269,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE#endif -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10 ) -/* SPL memory allocation configuration, this is for FAT implementation */ -#ifndef CONFIG_SYS_SPL_MALLOC_START -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE + \ - CONFIG_SYS_INIT_RAM_ADDR) -#endif -#endif -/* SPL SDMMC boot support */ #ifdef CONFIG_SPL_MMC_SUPPORT #if defined(CONFIG_SPL_FS_FAT ) || defined(CONFIG_SPL_FS_EXT4 )@@ -292,15 +299,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);#endif #endif -/* -* Stack setup
include/configs/socfpga_common.h unsigned int cm_get_qspi_controller_clk_hz(void); · line 304
Quoted 10 lines
include/configs/socfpga_common.h +0
-7-*/ -#if defined(CONFIG_TARGET_SOCFPGA_GEN5 ) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10 ) -#define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START -#endif -/* Extra Environment */ #ifndef CONFIG_SPL_BUILD
Signature · 2 lines
Best regards, Marek Vasut
PATCH v4 3/4 arm: socfpga: imply/default common config options
In reply to Simon GoldschmidtThis commit moves common config options used in all socfpga boards to select/imply in Kconfig. This both cleans up the defconfig files as well as makes future changes easier.
Options implied/defaulted for all sub-arches:
- SPL, SPL_DM, USE_TINY_PRINTF, NR_DRAM_BANKS
Options implied/defaulted for implied for A10 & gen5:
- FPGA_SOCFPGA, SYS_MALLOC_F_LEN, SYS_TEXT_BASE
Options implied/defaulted for gen5:
- SPL_STACK_R, SPL_SYS_MALLOC_SIMPLE, SPL_STACK_R_ADDR
---
Changes in v4:
- adapt to socfpga-next
Changes in v3:
- adapt to socfpge-next: imply USE_TINY_PRINTF only for gen5 & a10, not s10
Changes in v2:
- added patch to imply/default common config options
arch/arm/Kconfig | 2 ++ arch/arm/mach-socfpga/Kconfig | 20 ++++++++++++++++++++ configs/socfpga_arria10_defconfig | 6 ------ configs/socfpga_arria5_defconfig | 10 ---------- configs/socfpga_cyclone5_defconfig | 10 ---------- configs/socfpga_dbm_soc1_defconfig | 10 ---------- configs/socfpga_de0_nano_soc_defconfig | 10 ---------- configs/socfpga_de10_nano_defconfig | 10 ---------- configs/socfpga_de1_soc_defconfig | 10 ---------- configs/socfpga_is1_defconfig | 8 -------- configs/socfpga_sockit_defconfig | 10 ---------- configs/socfpga_socrates_defconfig | 10 ---------- configs/socfpga_sr1500_defconfig | 10 ---------- configs/socfpga_stratix10_defconfig | 2 -- configs/socfpga_vining_fpga_defconfig | 10 ---------- 15 files changed, 22 insertions(+), 116 deletions(-)
arch/arm/Kconfig +2 -0
@@ -841,6 +841,8 @@ config ARCH_SOCFPGA imply DM_SPI imply DM_SPI_FLASH imply FAT_WRITE + imply SPL + imply SPL_DM imply SPL_LIBDISK_SUPPORT imply SPL_MMC_SUPPORT imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
arch/arm/mach-socfpga/Kconfig +20 -0
@@ -1,8 +1,22 @@ if ARCH_SOCFPGA +config NR_DRAM_BANKS + default 1 + +config SPL_STACK_R_ADDR + default 0x00800000 if TARGET_SOCFPGA_GEN5 + config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2 +config SYS_MALLOC_F_LEN + default 0x2000 if TARGET_SOCFPGA_ARRIA10 + default 0x2000 if TARGET_SOCFPGA_GEN5 + +config SYS_TEXT_BASE + default 0x01000040 if TARGET_SOCFPGA_ARRIA10 + default 0x01000040 if TARGET_SOCFPGA_GEN5 + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5
@@ -21,6 +35,8 @@ config TARGET_SOCFPGA_ARRIA10 select SYSCON select SPL_SYSCON if SPL select ETH_DESIGNWARE_SOCFPGA + imply FPGA_SOCFPGA + imply USE_TINY_PRINTF config TARGET_SOCFPGA_CYCLONE5 bool
@@ -29,6 +45,10 @@ config TARGET_SOCFPGA_CYCLONE5 config TARGET_SOCFPGA_GEN5 bool select ALTERA_SDRAM + imply FPGA_SOCFPGA + imply SPL_STACK_R + imply SPL_SYS_MALLOC_SIMPLE + imply USE_TINY_PRINTF config TARGET_SOCFPGA_STRATIX10 bool
configs/socfpga_arria10_defconfig +0 -6
@@ -1,12 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y -CONFIG_SPL=y CONFIG_IDENT_STRING="socfpga_arria10" CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" # CONFIG_USE_BOOTCOMMAND is not set
@@ -28,9 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y
@@ -42,4 +37,3 @@ CONFIG_SPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_DESIGNWARE_APB_TIMER=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_arria5_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_socdk.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -72,4 +63,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_cyclone5_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socdk.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_dbm_soc1_defconfig +0 -10
@@ -1,11 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200"
@@ -15,8 +10,6 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y
@@ -41,9 +34,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_dbm_soc1" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -67,4 +58,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_de0_nano_soc_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -17,8 +12,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -40,9 +33,7 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -68,4 +59,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_de10_nano_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE10_NANO=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de10_nano.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -36,9 +29,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_nano" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -64,4 +55,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_de1_soc_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -17,8 +12,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -36,8 +29,6 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -55,5 +46,4 @@ CONFIG_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_DWC2=y -CONFIG_USE_TINY_PRINTF=y # CONFIG_EFI_LOADER is not set
configs/socfpga_is1_defconfig +0 -8
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_IS1=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200"
@@ -17,7 +12,6 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -36,11 +30,9 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_is1" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
configs/socfpga_sockit_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_sockit.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_socrates_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socrates.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -40,10 +33,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_sr1500_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_SR1500=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -18,8 +13,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -40,11 +33,9 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y
@@ -64,4 +55,3 @@ CONFIG_MII=y CONFIG_DM_RESET=y CONFIG_SPI=y CONFIG_CADENCE_QSPI=y -CONFIG_USE_TINY_PRINTF=y
configs/socfpga_stratix10_defconfig +0 -2
@@ -3,7 +3,6 @@ CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_TEXT_BASE=0x1000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y -CONFIG_SPL=y CONFIG_IDENT_STRING="socfpga_stratix10" CONFIG_SPL_FS_FAT=y CONFIG_NR_DRAM_BANKS=2
@@ -30,7 +29,6 @@ CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk" CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y
configs/socfpga_vining_fpga_defconfig +0 -10
@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_SAMTEC_VINING_FPGA=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y
@@ -19,8 +14,6 @@ CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y
@@ -45,12 +38,10 @@ CONFIG_CMD_UBI=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_LED_STATUS=y
@@ -90,4 +81,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
Signature · 1 line
2.17.1
PATCH v4 3/4 arm: socfpga: imply/default common config options
Quoted 607 lines · Simon Goldschmidt
This commit moves common config options used in all socfpga boards to select/imply in
Kconfig. This both cleans up the defconfig files as well as makes future changes easier.Options implied/defaulted for all sub-arches:
- SPL,SPL_DM,USE_TINY_PRINTF,NR_DRAM_BANKSOptions implied/defaulted for implied for A10 & gen5:
-FPGA_SOCFPGA,SYS_MALLOC_F_LEN,SYS_TEXT_BASEOptions implied/defaulted for gen5:
-SPL_STACK_R,SPL_SYS_MALLOC_SIMPLE,SPL_STACK_R_ADDRSigned-off-by Simon Goldschmidt <[email protected]>---
Changes in v4:
- adapt to socfpga-nextChanges in v3:
- adapt to socfpge-next: implyUSE_TINY_PRINTFonly for gen5 & a10, not s10Changes in v2:
- added patch to imply/default common config optionsarch/arm/Kconfig | 2 ++ arch/arm/mach-socfpga/Kconfig | 20 ++++++++++++++++++++ configs/socfpga_arria10_defconfig | 6 ------ configs/socfpga_arria5_defconfig | 10 ---------- configs/socfpga_cyclone5_defconfig | 10 ---------- configs/socfpga_dbm_soc1_defconfig | 10 ---------- configs/socfpga_de0_nano_soc_defconfig | 10 ---------- configs/socfpga_de10_nano_defconfig | 10 ---------- configs/socfpga_de1_soc_defconfig | 10 ---------- configs/socfpga_is1_defconfig | 8 -------- configs/socfpga_sockit_defconfig | 10 ---------- configs/socfpga_socrates_defconfig | 10 ---------- configs/socfpga_sr1500_defconfig | 10 ---------- configs/socfpga_stratix10_defconfig | 2 -- configs/socfpga_vining_fpga_defconfig | 10 ---------- 15 files changed, 22 insertions(+), 116 deletions(-)arch/arm/Kconfig +2
-0@@ -841,6 +841,8 @@ config ARCH_SOCFPGA imply DM_SPI imply DM_SPI_FLASH imply FAT_WRITE + imply SPL + imply SPL_DM imply SPL_LIBDISK_SUPPORT imply SPL_MMC_SUPPORT imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITIONarch/arm/mach-socfpga/Kconfig +20
-0@@ -1,8 +1,22 @@ if ARCH_SOCFPGA +config NR_DRAM_BANKS + default 1 + +config SPL_STACK_R_ADDR + default 0x00800000 if TARGET_SOCFPGA_GEN5 + config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2 +config SYS_MALLOC_F_LEN + default 0x2000 if TARGET_SOCFPGA_ARRIA10 + default 0x2000 if TARGET_SOCFPGA_GEN5 + +config SYS_TEXT_BASE + default 0x01000040 if TARGET_SOCFPGA_ARRIA10 + default 0x01000040 if TARGET_SOCFPGA_GEN5 + config TARGET_SOCFPGA_ARRIA5 bool select TARGET_SOCFPGA_GEN5@@ -21,6 +35,8 @@ config TARGET_SOCFPGA_ARRIA10 select SYSCON select SPL_SYSCON if SPL select ETH_DESIGNWARE_SOCFPGA + imply FPGA_SOCFPGA + imply USE_TINY_PRINTF config TARGET_SOCFPGA_CYCLONE5 bool@@ -29,6 +45,10 @@ config TARGET_SOCFPGA_CYCLONE5 config TARGET_SOCFPGA_GEN5 bool select ALTERA_SDRAM + imply FPGA_SOCFPGA + imply SPL_STACK_R + imply SPL_SYS_MALLOC_SIMPLE + imply USE_TINY_PRINTF config TARGET_SOCFPGA_STRATIX10 boolconfigs/socfpga_arria10_defconfig +0
-6@@ -1,12 +1,9 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y -CONFIG_SPL=y CONFIG_IDENT_STRING="socfpga_arria10" CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200" # CONFIG_USE_BOOTCOMMAND is not set@@ -28,9 +25,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria10_socdk_sdmmc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_MMC=y@@ -42,4 +37,3 @@ CONFIG_SPI=y CONFIG_TIMER=y CONFIG_SPL_TIMER=y CONFIG_DESIGNWARE_APB_TIMER=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_arria5_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_ARRIA5_SOCDK=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_arria5_socdk.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_arria5_socdk" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -72,4 +63,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_cyclone5_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_CYCLONE5_SOCDK=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socdk.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socdk" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_dbm_soc1_defconfig +0
-10@@ -1,11 +1,6 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200"@@ -15,8 +10,6 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y@@ -41,9 +34,7 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_dbm_soc1" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -67,4 +58,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_de0_nano_soc_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE0_NANO=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -17,8 +12,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -40,9 +33,7 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de0_nano_soc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -68,4 +59,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_de10_nano_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE10_NANO=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de10_nano.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -36,9 +29,7 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de10_nano" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -64,4 +55,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_de1_soc_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -17,8 +12,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -36,8 +29,6 @@ CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0" # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -55,5 +46,4 @@ CONFIG_SPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_DWC2=y -CONFIG_USE_TINY_PRINTF=y # CONFIG_EFI_LOADER is not setconfigs/socfpga_is1_defconfig +0
-8@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_IS1=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200"@@ -17,7 +12,6 @@ CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -36,11 +30,9 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_is1" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=yconfigs/socfpga_sockit_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_TERASIC_SOCKIT=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_sockit.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -39,10 +32,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sockit" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_socrates_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_EBV_SOCRATES=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -16,8 +11,6 @@ CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_socrates.dtb" CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -40,10 +33,8 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates" CONFIG_ENV_IS_IN_MMC=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -73,4 +64,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_sr1500_defconfig +0
-10@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_SR1500=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y@@ -18,8 +13,6 @@ CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -40,11 +33,9 @@ CONFIG_CMD_UBI=y # CONFIG_EFI_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_sr1500" CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_SYS_BOOTCOUNT_ADDR=0xfffffff8 -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_DM_I2C=y@@ -64,4 +55,3 @@ CONFIG_MII=y CONFIG_DM_RESET=y CONFIG_SPI=y CONFIG_CADENCE_QSPI=y -CONFIG_USE_TINY_PRINTF=yconfigs/socfpga_stratix10_defconfig +0
-2@@ -3,7 +3,6 @@ CONFIG_ARCH_SOCFPGA=y CONFIG_SYS_TEXT_BASE=0x1000 CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y -CONFIG_SPL=y CONFIG_IDENT_STRING="socfpga_stratix10" CONFIG_SPL_FS_FAT=y CONFIG_NR_DRAM_BANKS=2@@ -30,7 +29,6 @@ CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk" CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=yconfigs/socfpga_vining_fpga_defconfig +0
-9@@ -1,12 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SOCFPGA=y -CONFIG_SYS_TEXT_BASE=0x01000040 -CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_SOCFPGA_SAMTEC_VINING_FPGA=y -CONFIG_SPL=y -CONFIG_SPL_STACK_R_ADDR=0x00800000 CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=1 CONFIG_FIT=y CONFIG_BOOTDELAY=5 CONFIG_USE_BOOTARGS=y@@ -19,8 +14,6 @@ CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y -CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y@@ -45,12 +38,10 @@ CONFIG_CMD_UBI=y CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_vining_fpga" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_DFU_MMC=y CONFIG_DFU_RAM=y CONFIG_DFU_SF=y -CONFIG_FPGA_SOCFPGA=y CONFIG_DM_GPIO=y CONFIG_DWAPB_GPIO=y CONFIG_LED_STATUS=y
configs/socfpga_vining_fpga_defconfig CONFIG_USB_GADGET_VENDOR_NUM=0x0525 · line 93
Quoted 4 lines
configs/socfpga_vining_fpga_defconfig +0
-1@@ -90,4 +81,3 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_USB_GADGET_DWC2_OTG=y CONFIG_USB_GADGET_DOWNLOAD=y -CONFIG_USE_TINY_PRINTF=y
Signature · 2 lines
Best regards, Marek Vasut
PATCH v4 4/4 arm: socfpga: gen5: reduce SPL pre-reloc malloc
In reply to Simon GoldschmidtBy enabling debug prints in malloc_simple, we can see that SPL for socfpga gen5 does by far not need the 8 KiB malloc pool currently allocated for SPL in pre-reloc phase.
On socfpga_socrates, 1304 bytes are currently used (and this increases by ~200 bytes only for the sdram/reset fixes in socfpga-next).
To prevent wasting precious SRAM space, let's reduce the initial heap used for SPL to 2 KiB. This is still some hundred bytes more than currently used. Also, the gen5 SPL enables stack and heap in DDR memory pretty early. Only the initial uclass/dm parsing, serial console and DDR initialization is done in the initial heap, so these 2 KiB should be enough for all boards.
---
Changes in v4: None
Changes in v3:
- adapt to socfpga-next
Changes in v2:
- added patch to reduce gen5 SPL initial malloc pool to 2 KiB
arch/arm/mach-socfpga/Kconfig | 3 +++ 1 file changed, 3 insertions(+)
arch/arm/mach-socfpga/Kconfig +3 -0
@@ -6,6 +6,9 @@ config NR_DRAM_BANKS config SPL_STACK_R_ADDR default 0x00800000 if TARGET_SOCFPGA_GEN5 +config SPL_SYS_MALLOC_F_LEN + default 0x800 if TARGET_SOCFPGA_GEN5 + config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2
Signature · 1 line
2.17.1
PATCH v4 4/4 arm: socfpga: gen5: reduce SPL pre-reloc malloc
Quoted 33 lines · Simon Goldschmidt
By enabling debug prints in
malloc_simple, we can see that SPL for socfpga gen5 does by far not need the 8 KiB malloc pool currently allocated for SPL in pre-reloc phase.On
socfpga_socrates, 1304 bytes are currently used (and this increases by ~200 bytes only for the sdram/reset fixes in socfpga-next).To prevent wasting precious SRAM space, let's reduce the initial heap used for SPL to 2 KiB. This is still some hundred bytes more than currently used. Also, the gen5 SPL enables stack and heap in DDR memory pretty early. Only the initial uclass/dm parsing, serial console and DDR initialization is done in the initial heap, so these 2 KiB should be enough for all boards.
Signed-off-by Simon Goldschmidt <[email protected]>---
Changes in v4: None
Changes in v3:
- adapt to socfpga-nextChanges in v2:
- added patch to reduce gen5 SPL initial malloc pool to 2 KiBarch/arm/mach-socfpga/Kconfig | 3 +++ 1 file changed, 3 insertions(+)arch/arm/mach-socfpga/Kconfig +0
-0
arch/arm/mach-socfpga/Kconfig config NR_DRAM_BANKS · line 14
Quoted 9 lines
arch/arm/mach-socfpga/Kconfig +3
-0@@ -6,6 +6,9 @@ config NR_DRAM_BANKS config SPL_STACK_R_ADDR default 0x00800000 if TARGET_SOCFPGA_GEN5 +config SPL_SYS_MALLOC_F_LEN + default 0x800 if TARGET_SOCFPGA_GEN5 + config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2
Signature · 2 lines
Best regards, Marek Vasut
v4 cover arm: socfpga: stack and Kconfig cleanups
In reply to Simon GoldschmidtQuoted 45 lines · Simon Goldschmidt
This series cleans up stack definitions in
socfpga_common.has well as cleans up defconfig files by implying/defaulting common things inKconfigfiles.Finally, it reduces the malloc pool size used in first stage of gen5 SPL (without ddr available) in order to have more space available for code.
As this series does not contain direct bugfixes, it targets the socfpga-next branch.
Note that this series is meant for socfpga-next but depends on the generic series "spl: full-featured heap cleanups" from:
https://patchwork.ozlabs.org/project/uboot/list/?series=99561Changes in v4:
- make this patch 2/4 work without changing a10 heap allocation strategy (as the series doing that has been rejected)
- adapt to socfpga-nextChanges in v3:
- removed patch 2/5 from v2 (moved to patchwork #1067366, series #99561)
- adapt to socfpge-next: implyUSE_TINY_PRINTFonly for gen5 & a10, not s10
- adapt to socfpga-nextChanges in v2:
- fix commit message: "SPL post-reloc", not "SPL pre-reloc"
- added patch to imply/default common config options
- added patch to reduce gen5 SPL initial malloc pool to 2 KiBSimon Goldschmidt (4):
arm: socfpga: fix comment about SPL memory layout
arm: socfpga: put initial U-Boot stack into DDR
arm: socfpga: imply/default common config options
arm: socfpga: gen5: reduce SPL pre-reloc mallocarch/arm/Kconfig | 2 ++ arch/arm/mach-socfpga/Kconfig | 23 ++++++++++++ configs/socfpga_arria10_defconfig | 6 ---- configs/socfpga_arria5_defconfig | 10 ------ configs/socfpga_cyclone5_defconfig | 10 ------ configs/socfpga_dbm_soc1_defconfig | 10 ------ configs/socfpga_de0_nano_soc_defconfig | 10 ------ configs/socfpga_de10_nano_defconfig | 10 ------ configs/socfpga_de1_soc_defconfig | 10 ------
Quoted 9 lines
configs/socfpga_is1_defconfig | 8 ----- configs/socfpga_sockit_defconfig | 10 ------ configs/socfpga_socrates_defconfig | 10 ------ configs/socfpga_sr1500_defconfig | 10 ------ configs/socfpga_stratix10_defconfig | 2 -- configs/socfpga_vining_fpga_defconfig | 10 ------ include/configs/socfpga_common.h | 48 ++++++++++++-------------- 16 files changed, 48 insertions(+), 141 deletions(-)
Signature · 2 lines
Best regards, Marek Vasut