configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
PATCH RESEND 1/1 configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Migrate support for disable MUSB bulk split/combine to Kconfig
Green Travis build:
https://travis-ci.org/akiernan/u-boot/builds/519101867
---
drivers/usb/musb-new/Kconfig | 9 +++++++++ include/configs/am335x_evm.h | 1 - include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/brppt1.h | 3 --- include/configs/brxre1.h | 3 --- include/configs/chiliboard.h | 1 - include/configs/pengwyn.h | 1 - include/configs/siemens-am33x-common.h | 2 -- scripts/config_whitelist.txt | 1 - 10 files changed, 9 insertions(+), 14 deletions(-)
drivers/usb/musb-new/Kconfig +9 -0
@@ -54,6 +54,15 @@ config USB_MUSB_SUNXI Say y here to enable support for the sunxi OTG / DRC USB controller used on almost all sunxi boards. +config USB_MUSB_DISABLE_BULK_COMBINE_SPLIT + bool "Disable MUSB bulk split/combine" + default y + help + On TI AM335x devices, MUSB has bulk split/combine feature enabled + in the ConfigData register, but the current MUSB driver does not + support it yet. Select this option to disable the feature until the + driver adds the support. + endif config USB_MUSB_PIO_ONLY
include/configs/am335x_evm.h +0 -1
@@ -240,7 +240,6 @@* add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL#define CONFIG_AM335X_USB1
include/configs/baltos.h +0 -1
@@ -251,7 +251,6 @@* add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST#define CONFIG_AM335X_USB1
include/configs/bav335x.h +0 -1
@@ -387,7 +387,6 @@ DEFAULT_LINUX_BOOT_ENV \* add mass storage support and for gadget we add both RNDIS ethernet * and DFU. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL#define CONFIG_AM335X_USB1
include/configs/brppt1.h +0 -3
@@ -182,9 +182,6 @@ NANDTGTS \#define CONFIG_NAND_OMAP_GPMC_WSCFG 1#endif /* CONFIG_NAND */ -/* USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#if defined(CONFIG_SPI )/* SPI Flash */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
include/configs/brxre1.h +0 -3
@@ -68,9 +68,6 @@ BUR_COMMON_ENV \#define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG -/* USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -/* Environment */ #define CONFIG_SYS_MMC_ENV_DEV 1#define CONFIG_SYS_MMC_ENV_PART 2
include/configs/chiliboard.h +0 -1
@@ -148,7 +148,6 @@/* USB configuration */ #define CONFIG_ARCH_MISC_INIT -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
include/configs/pengwyn.h +0 -1
@@ -157,7 +157,6 @@* board schematic and physical port wired to each. Then for host we * add mass storage support. */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL#define CONFIG_AM335X_USB1
include/configs/siemens-am33x-common.h +0 -2
@@ -150,8 +150,6 @@/* * USB configuration */ -#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT -#define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL#define CONFIG_AM335X_USB1
scripts/config_whitelist.txt +0 -1
@@ -4543,7 +4543,6 @@ CONFIG_USB_GADGET_SUPERH CONFIG_USB_INVENTRA_DMA CONFIG_USB_ISP1301_I2C_ADDR CONFIG_USB_MAX_CONTROLLER_COUNT -CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT CONFIG_USB_MUSB_TIMEOUT CONFIG_USB_MUSB_TUSB6010 CONFIG_USB_OHCI_EP93XX
Signature · 1 line
2.17.1
PATCH RESEND 1/1 configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Quoted 7 lines · Alex Kiernan
Migrate support for disable MUSB bulk split/combine to
KconfigGreen Travis build:
https://travis-ci.org/akiernan/u-boot/builds/519101867
Signed-off-by Alex Kiernan <[email protected]>
I think it's better if this goes through u-boot-ti , or shall I take it via usb ?
Signature · 2 lines
Best regards, Marek Vasut
PATCH RESEND 1/1 configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Quoted 5 lines · Marek Vasut
Quoted 4 lines · Alex Kiernan
Migrate support for disable MUSB bulk split/combine to
KconfigGreen Travis build:
Quoted 8 lines
Quoted 3 lines
https://travis-ci.org/akiernan/u-boot/builds/519101867
Signed-off-by Alex Kiernan <[email protected]>Acked-by Marek Vasut <[email protected]>I think it's better if this goes through u-boot-ti , or shall I take it via usb ?
I'm fine with you grabbing it with other USB stuff, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190413/36375188/attachment.sig>