ARM: kirkwood: add db-88f6281-bp board
Subsystems (2)
PATCH v4 1/2 ARM: kirkwood: add db-88f6281-bp board
This is Marvell's Kirkwood development board. It has the following features
- 512M DDR2
- 2 PCI connectors
- 1 x1 PCI-e interface
- 1 Gigabit Ethernet Port
- 2 SATA Ports
- USB 2.0 Interface
- SDIO
- 128M NAND Flash
- 16M SPI Flash
It can be strapped to boot from SPI or NAND so there are two defconfigs (one per boot media).
---
Changes in v4:
- Correctly handle external build output directories
- Add entries to arch/arm/dts/Makefile
Changes in v3:
- incorporate review feedback (except for DM_SERIAL) from Stefan
arch/arm/dts/Makefile | 2 + arch/arm/dts/kirkwood-db-88f6281-spi.dts | 48 +++++++++ arch/arm/dts/kirkwood-db-88f6281.dts | 26 +++++ arch/arm/dts/kirkwood-db.dtsi | 94 ++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 4 + board/Marvell/db-88f6281-bp/.gitignore | 1 + board/Marvell/db-88f6281-bp/Kconfig | 12 +++ board/Marvell/db-88f6281-bp/MAINTAINERS | 10 ++ board/Marvell/db-88f6281-bp/Makefile | 12 +++ board/Marvell/db-88f6281-bp/db-88f6281-bp.c | 103 ++++++++++++++++++++ board/Marvell/db-88f6281-bp/kwbimage.cfg.in | 36 +++++++ configs/db-88f6281-bp-nand_defconfig | 53 ++++++++++ configs/db-88f6281-bp-spi_defconfig | 55 +++++++++++ include/configs/db-88f6281-bp.h | 99 +++++++++++++++++++ 14 files changed, 555 insertions(+) create mode 100644 arch/arm/dts/kirkwood-db-88f6281-spi.dts create mode 100644 arch/arm/dts/kirkwood-db-88f6281.dts create mode 100644 arch/arm/dts/kirkwood-db.dtsi create mode 100644 board/Marvell/db-88f6281-bp/.gitignore create mode 100644 board/Marvell/db-88f6281-bp/Kconfig create mode 100644 board/Marvell/db-88f6281-bp/MAINTAINERS create mode 100644 board/Marvell/db-88f6281-bp/Makefile create mode 100644 board/Marvell/db-88f6281-bp/db-88f6281-bp.c create mode 100644 board/Marvell/db-88f6281-bp/kwbimage.cfg.in create mode 100644 configs/db-88f6281-bp-nand_defconfig create mode 100644 configs/db-88f6281-bp-spi_defconfig create mode 100644 include/configs/db-88f6281-bp.h
arch/arm/dts/Makefile +2 -0
@@ -37,6 +37,8 @@ dtb-$(CONFIG_KIRKWOOD) += \ kirkwood-atl-sbx81lifxcat.dtb \ kirkwood-blackarmor-nas220.dtb \ kirkwood-d2net.dtb \ + kirkwood-db-88f6281.dtb \ + kirkwood-db-88f6281-spi.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \
arch/arm/dts/kirkwood-db-88f6281-spi.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/dts/kirkwood-db-88f6281.dts new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Marvell DB-88F6281-BP Development Board Setup + * + * Saeed Bishara <[email protected]> + * Thomas Petazzoni <[email protected]> + * + */ + +/dts-v1/; + +#include "kirkwood-db.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Marvell DB-88F6281-BP Development Board"; + compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood"; +}; + +&pciec { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +};
arch/arm/dts/kirkwood-db.dtsi new file +94 -0
94 lines not on this page · raw message
arch/arm/mach-kirkwood/Kconfig +4 -0
@@ -65,6 +65,9 @@ config TARGET_SBx81LIFKW config TARGET_SBx81LIFXCAT bool "Allied Telesis SBx81GP24/SBx81GT24" +config TARGET_DB_88F6281_BP + bool "Marvell DB-88F6281-BP" + endchoice config SYS_SOC
@@ -89,5 +92,6 @@ source "board/Seagate/nas220/Kconfig" source "board/zyxel/nsa310s/Kconfig" source "board/alliedtelesis/SBx81LIFKW/Kconfig" source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" +source "board/Marvell/db-88f6281-bp/Kconfig" endif
board/Marvell/db-88f6281-bp/.gitignore new file +1 -0
@@ -0,0 +1 @@ +kwbimage.cfg
board/Marvell/db-88f6281-bp/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_DB_88F6281_BP + +config SYS_BOARD + default "db-88f6281-bp" + +config SYS_VENDOR + default "Marvell" + +config SYS_CONFIG_NAME + default "db-88f6281-bp" + +endif
board/Marvell/db-88f6281-bp/MAINTAINERS new file +10 -0
@@ -0,0 +1,10 @@ +DB_88F6820_AMC BOARD +M: Chris Packham <[email protected]> +S: Maintained +F: arch/arm/dts/kirkwood-db-88f6281.dts +F: arch/arm/dts/kirkwood-db-88f6281-spi.dts +F: arch/arm/dts/kirkwood-db.dtsi +F: board/Marvell/db-88f6281-bp/ +F: include/configs/db-88f6281-bp.h +F: configs/db-88f6281-bp-nand_defconfig +F: configs/db-88f6281-bp-spi_defconfig
board/Marvell/db-88f6281-bp/Makefile new file +12 -0
@@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y := db-88f6281-bp.o +extra-y := kwbimage.cfg + +quiet_cmd_sed = SED $@ + cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $<)$(@F) + +SEDFLAGS_kwbimage.cfg = -e "s/^\#@BOOT_FROM.*/BOOT_FROM $(if $(CONFIG_CMD_NAND),nand,spi)/" +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ + include/config/auto.conf + $(call if_changed,sed)
board/Marvell/db-88f6281-bp/db-88f6281-bp.c new file +103 -0
103 lines not on this page · raw message
board/Marvell/db-88f6281-bp/kwbimage.cfg.in new file +36 -0
@@ -0,0 +1,36 @@ +# SPDX-License-Identifier: GPL-2.0+ + +# Boot Media configurations +#@BOOT_FROM + +DATA 0xd00100e0 0x1b1b1b9b +DATA 0xd0020134 0xbbbbbbbb +DATA 0xd0020138 0x00bbbbbb +DATA 0xd0020154 0x00000200 +DATA 0xd002014c 0x00001c00 +DATA 0xd0020148 0x00000001 + +DATA 0xd0001400 0x43000c30 +DATA 0xd0001404 0x39543000 +DATA 0xd0001408 0x22125451 +DATA 0xd000140c 0x00000833 +DATA 0xd0001410 0x000000cc +DATA 0xd0001414 0x00000000 +DATA 0xd0001418 0x00000000 +DATA 0xd000141c 0x00000c52 +DATA 0xd0001420 0x00000044 +DATA 0xd0001424 0x0000f1ff +DATA 0xd0001428 0x00085520 +DATA 0xd000147c 0x00008552 +DATA 0xd0001504 0x0ffffff1 +DATA 0xd0001508 0x10000000 +DATA 0xd000150c 0x0ffffff5 +DATA 0xd0001514 0x00000000 +DATA 0xd000151c 0x00000000 +DATA 0xd0001494 0x84210000 +DATA 0xd0001498 0x00000000 +DATA 0xd000149c 0x0000f40f +DATA 0xd0001480 0x00000001 + +# End of Header extension +DATA 0x0 0x0
configs/db-88f6281-bp-nand_defconfig new file +53 -0
53 lines not on this page · raw message
configs/db-88f6281-bp-spi_defconfig new file +55 -0
55 lines not on this page · raw message
include/configs/db-88f6281-bp.h new file +99 -0
99 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH v4 2/2 ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
Switch to the driver model for USB on the db-88f6281-bp board. CONFIG_BLK can't be enabled yet because mvebu_mmc.c needs converting.
---
In my original patch series having this separate made sense as this wouldn't be possible without the USB changes. Now it may make sense to squash this into the previous patch.
Changes in v4: None
Changes in v3: None
configs/db-88f6281-bp-nand_defconfig | 1 + configs/db-88f6281-bp-spi_defconfig | 1 + 2 files changed, 2 insertions(+)
configs/db-88f6281-bp-nand_defconfig +1 -0
@@ -47,6 +47,7 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y
configs/db-88f6281-bp-spi_defconfig +1 -0
@@ -49,6 +49,7 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_KIRKWOOD_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_LZMA=y
Signature · 1 line
2.21.0
PATCH v4 2/2 ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
Quoted 5 lines · Chris Packham
Switch to the driver model for USB on the db-88f6281-bp board.
CONFIG_BLKcan't be enabled yet becausemvebu_mmc.cneeds converting.Signed-off-by Chris Packham <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan
PATCH v4 1/2 ARM: kirkwood: add db-88f6281-bp board
In reply to Chris PackhamQuoted 13 lines · Chris Packham
This is Marvell's Kirkwood development board. It has the following features
- 512M DDR2
- 2 PCI connectors
- 1 x1 PCI-e interface
- 1 Gigabit Ethernet Port
- 2 SATA Ports
- USB 2.0 Interface
- SDIO
- 128M NAND Flash
- 16M SPI Flash
Quoted 4 lines
It can be strapped to boot from SPI or NAND so there are two defconfigs (one per boot media).
Signed-off-by Chris Packham <[email protected]>
Applied to u-boot-marvell/master.
Thanks,
Stefan