Skip to contentSkip to conversation

Add support for the TI ADS8344 A/DC chips

PATCH Applied Gregory CLEMENT 3 participants 8 messages Apr 12, 2019 – Apr 22, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover Add support for the TI ADS8344 A/DC chips

Hello,

this is the third version of a small series adding the support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

I finally took time to address the last comments on the second version.

Thanks!

Gregory

Changelog:

v2->v3:

- Add the reviewed-by tag from Rob on the binding

- Fix the license inconsistency

- Add a comment about the spinlock based on the exhaustive explanation given by Jonathan

v1->v2:

- Remove the mention to the #io-channel-cells in the first patch, as there is no consumer.

- Remove scan_index and scan_type, they are not used.

- Use defines for building the command and remove the comment.

- Remove the goto and the label in the probe() function as the label was only use once.

- Remove the "#ifdef CONFIG_OF", the driver already depends on OF.

- Don't use of_match_ptr and rename ads8344_dt_id to ads8344_of_match.

Gregory CLEMENT (2):
dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
iio: adc: Add driver for the TI ADS8344 A/DC chips

 .../bindings/iio/adc/ti-ads8344.txt           |  19 ++
 drivers/iio/adc/Kconfig                       |  10 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-ads8344.c                  | 204 ++++++++++++++++++
 4 files changed, 234 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
 create mode 100644 drivers/iio/adc/ti-ads8344.c
Signature · 1 line
2.20.1
#1 lore raw

PATCH v3 1/2 dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips

This adds device tree bindings for the TI ADS8344 A/DC chips.

---
 .../bindings/iio/adc/ti-ads8344.txt           | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt new file +19 -0
new file mode 100644
index 000000000000..e47c3759a82b
@@ -0,0 +1,19 @@
+* Texas Instruments ADS8344 A/DC chip
+
+Required properties:
+ - compatible: Must be "ti,ads8344"
+ - reg: SPI chip select number for the device
+ - vref-supply: phandle to a regulator node that supplies the
+   reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,ads8344";
+	reg = <0>;
+	vref-supply = <&refin_supply>;
+	spi-max-frequency = <10000000>;
+};
Signature · 1 line
2.20.1
maintainer Applied
#2 lore raw

Re: [PATCH v3 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips

Quoted 4 lines · On Fri, 12 Apr 2019 11:15:36 +0200 Gregory CLEMENT…

This adds device tree bindings for the TI ADS8344 A/DC chips.

Applied.

Thanks,

Jonathan

Quoted 30 lines
---
 .../bindings/iio/adc/ti-ads8344.txt           | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt new file +19 -0
new file mode 100644
index 000000000000..e47c3759a82b
@@ -0,0 +1,19 @@
+* Texas Instruments ADS8344 A/DC chip
+
+Required properties:
+ - compatible: Must be "ti,ads8344"
+ - reg: SPI chip select number for the device
+ - vref-supply: phandle to a regulator node that supplies the
+   reference voltage
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,ads8344";
+	reg = <0>;
+	vref-supply = <&refin_supply>;
+	spi-max-frequency = <10000000>;
+};
#3 lore raw

PATCH v3 2/2 iio: adc: Add driver for the TI ADS8344 A/DC chips

In reply to Gregory CLEMENT

This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c
drivers/iio/adc/Kconfig +10 -0
index 76db6e5cc296..447d3a871746 100644
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
drivers/iio/adc/Makefile +1 -0
index 6fcebd167524..1f3ae934111d 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
drivers/iio/adc/ti-ads8344.c new file +204 -0

204 lines not on this page · raw message

Signature · 1 line
2.20.1
maintainer
#4 lore raw

Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips

Quoted 4 lines · On Fri, 12 Apr 2019 11:15:37 +0200 Gregory CLEMENT…

This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 250 lines
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c
drivers/iio/adc/Kconfig +10 -0
index 76db6e5cc296..447d3a871746 100644
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
drivers/iio/adc/Makefile +1 -0
index 6fcebd167524..1f3ae934111d 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
drivers/iio/adc/ti-ads8344.c new file +204 -0
new file mode 100644
index 000000000000..e1649e237edc
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <[email protected]>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <[email protected]>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");
#5 lore raw

Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips

Quoted 9 lines · On Sun, 14 Apr 2019 14:51:52 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 4 lines · On Fri, 12 Apr 2019 11:15:37 +0200 Gregory CLEMENT…

This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

I spoke too soon. See below.

Fixed up.

Jonathan

Quoted 233 lines

Thanks,

Jonathan

Quoted 228 lines
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c
drivers/iio/adc/Kconfig +10 -0
index 76db6e5cc296..447d3a871746 100644
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
drivers/iio/adc/Makefile +1 -0
index 6fcebd167524..1f3ae934111d 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
drivers/iio/adc/ti-ads8344.c new file +182 -0
new file mode 100644
index 000000000000..e1649e237edc
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <[email protected]>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
Quoted 8 lines

drivers/iio/adc/ti-ads8344.c line 190

Quoted 8 lines
drivers/iio/adc/ti-ads8344.c new file +8 -0
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);

no such variable... fixed as ads8344_of_match.

Quoted 15 lines
Quoted 14 lines
drivers/iio/adc/ti-ads8344.c new file +14 -0
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <[email protected]>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");  
#6 lore raw

Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips

Hi Jonathan,

Quoted 9 lines
Quoted 6 lines · On Sun, 14 Apr 2019 14:51:52 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 3 lines · On Fri, 12 Apr 2019 11:15:37 +0200 Gregory CLEMENT…

This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

Quoted 6 lines
Quoted 3 lines
Quoted 1 line

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

I spoke too soon. See below.

Fixed up.

Thanks, I don't know how I missed it...

Do you confirmed that, this series is OK for 5.2 and you don't expect any more change from my side?

Gregory

Quoted 262 lines

Jonathan

Quoted 233 lines

Thanks,

Jonathan

Quoted 228 lines
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c
drivers/iio/adc/Kconfig +10 -0
index 76db6e5cc296..447d3a871746 100644
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
drivers/iio/adc/Makefile +1 -0
index 6fcebd167524..1f3ae934111d 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
drivers/iio/adc/ti-ads8344.c new file +182 -0
new file mode 100644
index 000000000000..e1649e237edc
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <[email protected]>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
Quoted 8 lines

drivers/iio/adc/ti-ads8344.c line 190

Quoted 8 lines
drivers/iio/adc/ti-ads8344.c new file +8 -0
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);

no such variable... fixed as ads8344_of_match.

Quoted 15 lines
Quoted 14 lines
drivers/iio/adc/ti-ads8344.c new file +14 -0
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <[email protected]>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");  
Signature · 3 lines
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
#7 lore raw

Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips

Quoted 14 lines · On Sun, 21 Apr 2019 19:19:57 +0200 Gregory CLEMENT…

Hi Jonathan,

Quoted 12 lines
Quoted 9 lines · On Sun, 14 Apr 2019 14:51:52 +0100 Jonathan Cameron <[email protected]> wrote:
Quoted 4 lines · On Fri, 12 Apr 2019 11:15:37 +0200 Gregory CLEMENT…

This adds support for the Texas Instruments ADS8344 ADC chip. This chip has a 16-bit 8-Channel ADC and is access directly through SPI.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Quoted 8 lines
Quoted 3 lines

I spoke too soon. See below.

Fixed up.

Thanks, I don't know how I missed it...

Do you confirmed that, this series is OK for 5.2 and you don't expect any more change from my side?

Yes it's fine.

Quoted 2 lines

Gregory

Jonathan

Quoted 264 lines
Quoted 263 lines

Jonathan

Quoted 233 lines

Thanks,

Jonathan

Quoted 228 lines
---
 drivers/iio/adc/Kconfig      |  10 ++
 drivers/iio/adc/Makefile     |   1 +
 drivers/iio/adc/ti-ads8344.c | 204 +++++++++++++++++++++++++++++++++++
 3 files changed, 215 insertions(+)
 create mode 100644 drivers/iio/adc/ti-ads8344.c
drivers/iio/adc/Kconfig +10 -0
index 76db6e5cc296..447d3a871746 100644
@@ -967,6 +967,16 @@ config TI_ADS7950
 	  To compile this driver as a module, choose M here: the
 	  module will be called ti-ads7950.
 
+config TI_ADS8344
+	tristate "Texas Instruments ADS8344"
+	depends on SPI && OF
+	help
+	  If you say yes here you get support for Texas Instruments ADS8344
+	  ADC chips
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-ads8344.
+
 config TI_ADS8688
 	tristate "Texas Instruments ADS8688"
 	depends on SPI && OF
drivers/iio/adc/Makefile +1 -0
index 6fcebd167524..1f3ae934111d 100644
@@ -87,6 +87,7 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
 obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
+obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_ADS124S08) += ti-ads124s08.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
drivers/iio/adc/ti-ads8344.c new file +182 -0
new file mode 100644
index 000000000000..e1649e237edc
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ADS8344 16-bit 8-Channel ADC driver
+ *
+ * Author: Gregory CLEMENT <[email protected]>
+ *
+ * Datasheet: http://www.ti.com/lit/ds/symlink/ads8344.pdf
+ */
+
+#include <linux/delay.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#define ADS8344_START BIT(7)
+#define ADS8344_SINGLE_END BIT(2)
+#define ADS8344_CHANNEL(channel) ((channel) << 4)
+#define ADS8344_CLOCK_INTERNAL 0x2 /* PD1 = 1 and PD0 = 0 */
+
+struct ads8344 {
+	struct spi_device *spi;
+	struct regulator *reg;
+	/*
+	 * Lock protecting access to adc->tx_buff and rx_buff,
+	 * especially from concurrent read on sysfs file.
+	 */
+	struct mutex lock;
+
+	u8 tx_buf ____cacheline_aligned;
+	u16 rx_buf;
+};
+
+#define ADS8344_VOLTAGE_CHANNEL(chan, si)				\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = chan,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+#define ADS8344_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)			\
+	{								\
+		.type = IIO_VOLTAGE,					\
+		.indexed = 1,						\
+		.channel = (chan1),					\
+		.channel2 = (chan2),					\
+		.differential = 1,					\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	}
+
+static const struct iio_chan_spec ads8344_channels[] = {
+	ADS8344_VOLTAGE_CHANNEL(0, 0),
+	ADS8344_VOLTAGE_CHANNEL(1, 4),
+	ADS8344_VOLTAGE_CHANNEL(2, 1),
+	ADS8344_VOLTAGE_CHANNEL(3, 5),
+	ADS8344_VOLTAGE_CHANNEL(4, 2),
+	ADS8344_VOLTAGE_CHANNEL(5, 6),
+	ADS8344_VOLTAGE_CHANNEL(6, 3),
+	ADS8344_VOLTAGE_CHANNEL(7, 7),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(2, 3, 9),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(4, 5, 10),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(6, 7, 11),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(1, 0, 12),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(3, 2, 13),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(5, 4, 14),
+	ADS8344_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
+};
+
+static int ads8344_adc_conversion(struct ads8344 *adc, int channel,
+				  bool differential)
+{
+	struct spi_device *spi = adc->spi;
+	int ret;
+
+	adc->tx_buf = ADS8344_START;
+	if (!differential)
+		adc->tx_buf |= ADS8344_SINGLE_END;
+	adc->tx_buf |= ADS8344_CHANNEL(channel);
+	adc->tx_buf |= ADS8344_CLOCK_INTERNAL;
+
+	ret = spi_write(spi, &adc->tx_buf, 1);
+	if (ret)
+		return ret;
+
+	udelay(9);
+
+	ret = spi_read(spi, &adc->rx_buf, 2);
+	if (ret)
+		return ret;
+
+	return adc->rx_buf;
+}
+
+static int ads8344_read_raw(struct iio_dev *iio,
+			    struct iio_chan_spec const *channel, int *value,
+			    int *shift, long mask)
+{
+	struct ads8344 *adc = iio_priv(iio);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&adc->lock);
+		*value = ads8344_adc_conversion(adc, channel->scan_index,
+						channel->differential);
+		mutex_unlock(&adc->lock);
+		if (*value < 0)
+			return *value;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*value = regulator_get_voltage(adc->reg);
+		if (*value < 0)
+			return *value;
+
+		/* convert regulator output voltage to mV */
+		*value /= 1000;
+		*shift = 16;
+
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ads8344_info = {
+	.read_raw = ads8344_read_raw,
+};
+
+static int ads8344_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ads8344 *adc;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->spi = spi;
+	mutex_init(&adc->lock);
+
+	indio_dev->name = dev_name(&spi->dev);
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->info = &ads8344_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ads8344_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ads8344_channels);
+
+	adc->reg = devm_regulator_get(&spi->dev, "vref");
+	if (IS_ERR(adc->reg))
+		return PTR_ERR(adc->reg);
+
+	ret = regulator_enable(adc->reg);
+	if (ret)
+		return ret;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		regulator_disable(adc->reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ads8344_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+	struct ads8344 *adc = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	regulator_disable(adc->reg);
+
Quoted 8 lines

drivers/iio/adc/ti-ads8344.c line 190

Quoted 8 lines
drivers/iio/adc/ti-ads8344.c new file +8 -0
+	return 0;
+}
+
+static const struct of_device_id ads8344_of_match[] = {
+	{ .compatible = "ti,ads8344", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ads8344_dt_ids);  

no such variable... fixed as ads8344_of_match.

Quoted 15 lines
Quoted 14 lines
drivers/iio/adc/ti-ads8344.c new file +14 -0
+
+static struct spi_driver ads8344_driver = {
+	.driver = {
+		.name = "ads8344",
+		.of_match_table = ads8344_of_match,
+	},
+	.probe = ads8344_probe,
+	.remove = ads8344_remove,
+};
+module_spi_driver(ads8344_driver);
+
+MODULE_AUTHOR("Gregory CLEMENT <[email protected]>");
+MODULE_DESCRIPTION("ADS8344 driver");
+MODULE_LICENSE("GPL");