ARM: imx6: update 1GB DDR3 calibration for DHCOM i.MX6qd PDK
PATCH v2 2/2 ARM: imx6: update 1GB DDR3 calibration for DHCOM i.MX6qd PDK
The existing calibration values were found to be incorrect in comparison to newly determined values.
The new values were generated with the help of 5 boards. They have been determined with the NXP Utility 'DDR Stress Test (2.9.0)'.
Signed-off-by Ludwig Zenz <[email protected]>
--- board/dhelectronics/dh_imx6/dh_imx6_spl.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
board/dhelectronics/dh_imx6/dh_imx6_spl.c +12 -12
@@ -161,18 +161,18 @@ static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x4g_800 = { };static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = { - .p0_mpwldectrl0 =0x0011000E , - .p0_mpwldectrl1 =0x000E001B , - .p1_mpwldectrl0 =0x00190015 , - .p1_mpwldectrl1 =0x00070018 , - .p0_mpdgctrl0 =0x42720306 , - .p0_mpdgctrl1 =0x026F0266 , - .p1_mpdgctrl0 =0x4273030A , - .p1_mpdgctrl1 =0x02740240 , - .p0_mprddlctl =0x45393B3E , - .p1_mprddlctl =0x403A3747 , - .p0_mpwrdlctl =0x40434541 , - .p1_mpwrdlctl =0x473E4A3B , + .p0_mpwldectrl0 =0x001a001a , + .p0_mpwldectrl1 =0x00260015 , + .p0_mpdgctrl0 =0x030c0320 , + .p0_mpdgctrl1 =0x03100304 , + .p0_mprddlctl =0x432e3538 , + .p0_mpwrdlctl =0x363f423d , + .p1_mpwldectrl0 =0x0006001e , + .p1_mpwldectrl1 =0x00050015 , + .p1_mpdgctrl0 =0x031c0324 , + .p1_mpdgctrl1 =0x030c0258 , + .p1_mprddlctl =0x3834313f , + .p1_mpwrdlctl =0x47374a42 , };static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = {
Signature · 1 line
2.11.0
PATCH v2 2/2 ARM: imx6: update 1GB DDR3 calibration for DHCOM i.MX6qd PDK
Quoted 5 lines
The existing calibration values were found to be incorrect in comparison to newly determined values.
The new values were generated with the help of 5 boards. They have been determined with the NXP Utility 'DDR Stress Test (2.9.0)'.Signed-off-by Ludwig Zenz <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================