arm64: dts: exynos: Move pmu and timer nodes out of soc
Subsystems (2)
Krzysztof Kozlowski
maintainerPATCH 1/2 arm64: dts: exynos: Move pmu and timer nodes out of soc
The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like:
arch/arm64/boot/dts/exynos/exynos7.dtsi:472.11-480.5:
Warning (simple_bus_reg): /soc/arm-pmu: missing or empty reg/ranges property
arch/arm64/boot/dts/exynos/exynos7.dtsi:482.9-492.5:
Warning (simple_bus_reg): /soc/timer: missing or empty reg/ranges property
--- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 36 +++++++++--------- arch/arm64/boot/dts/exynos/exynos7.dtsi | 44 +++++++++++----------- 2 files changed, 40 insertions(+), 40 deletions(-)
arch/arm64/boot/dts/exynos/exynos5433.dtsi +18 -18
@@ -23,6 +23,24 @@ interrupt-parent = <&gic>; + arm_a53_pmu { + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + arm_a57_pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -237,24 +255,6 @@ #size-cells = <1>; ranges; - arm_a53_pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - arm_a57_pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; - }; - chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>;
arch/arm64/boot/dts/exynos/exynos7.dtsi +22 -22
62 lines not on this page · raw message
Signature · 1 line
2.17.1
Krzysztof Kozlowski
maintainerPATCH 2/2 arm64: dts: exynos: Move fixed-clocks out of soc
The XXTI fixed-clock is the input to the SoC therefore it should not be inside the soc node. This also fixes DTC W=1 warning:
arch/arm64/boot/dts/exynos/exynos7.dtsi:90.17-94.5:
Warning (simple_bus_reg): /soc/xxti: missing or empty reg/ranges property
While moving, change the name of the xxti node to match the generic type of device (following DeviceTree specification).
--- arch/arm64/boot/dts/exynos/exynos5433.dtsi | 13 +++++++------ arch/arm64/boot/dts/exynos/exynos7.dtsi | 13 +++++++------ 2 files changed, 14 insertions(+), 12 deletions(-)
arch/arm64/boot/dts/exynos/exynos5433.dtsi +7 -6
@@ -41,6 +41,13 @@ interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; + xxti: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -260,12 +267,6 @@ reg = <0x10000000 0x100>; }; - xxti: xxti { - compatible = "fixed-clock"; - clock-output-names = "oscclk"; - #clock-cells = <0>; - }; - cmu_top: clock-controller@10030000 { compatible = "samsung,exynos5433-cmu-top"; reg = <0x10030000 0x1000>;
arch/arm64/boot/dts/exynos/exynos7.dtsi +7 -6
@@ -38,6 +38,13 @@ <&cpu_atlas2>, <&cpu_atlas3>; }; + fin_pll: clock { + /* XXTI */ + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
@@ -87,12 +94,6 @@ reg = <0x10000000 0x100>; }; - fin_pll: xxti { - compatible = "fixed-clock"; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; - gic: interrupt-controller@11001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>;
Signature · 1 line
2.17.1