Skip to contentSkip to conversation

usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs

PATCH New Heikki Krogerus 1 participant 1 message Apr 16, 2019 USB

lore
Share & tools
lore
#0 lore raw

PATCH 1/8 usb: typec: fusb302: Make fusb302_set_cc_polarity also set pull ups / downs

Quoted 18 lines · Greg Kroah-Hartman
Quoted 17 lines · Hans de Goede

The 2 callers of fusb302_set_cc_polarity both call fusb302_set_cc_pull directly before calling fusb302_set_cc_polarity, this is not ideal for 2 reasons:

1) fusb302_set_cc_pull uses the cached polarity when applying pull-ups, which maybe changed immediately afterwards, to fix this set_cc_polarity already does the pull-up setting.

2) Both touch the SWITCHES0 register in a r-w-modify cycle, this leads to read reg, write reg, read reg, write reg. If we fold the setting of the pull-downs into fusb302_set_cc_polarity then not only can we avoid doing the reads / writes twice, at this point we set all bits, so we can skip the read, turning 4 (slowish) i2c-transfers into 1.

Doing this also avoids the need to cache the pull_up state in struct fusb302_chip.

Quoted 7 lines
Quoted 4 lines
---
 drivers/usb/typec/tcpm/fusb302.c | 48 +++++++++++---------------------
 1 file changed, 16 insertions(+), 32 deletions(-)

It would be nice to get some people to review/ack this series before I take it (hint...)

Hans send second and third version of these. These are already in.

thanks,