hwmon: (ina3221) Add averaging mode support
Subsystems (2)
PATCH v2 1/1 hwmon: (ina3221) Add averaging mode support
The CONFIG register has a 3-bit averaging mode field for users to setup the number of samples that are collected and averaged together. This is very useful to filter noise from sensor data.
This patch adds a 'samples' sysfs node using hwmon_chip_samples of hwmon core, and updates wait time calculation by taking this samples value into account.
---
Changelogv1->v2:
* Implemented "samples" through hwmon_chip_info
* Used find_closest()
Documentation/hwmon/ina3221 | 3 ++ drivers/hwmon/ina3221.c | 67 ++++++++++++++++++++++++++++++++++++- 2 files changed, 69 insertions(+), 1 deletion(-)
Documentation/hwmon/ina3221 +3 -0
@@ -35,3 +35,6 @@ curr[123]_max Warning alert current(mA) setting, activates the average is above this value. curr[123]_max_alarm Warning alert current limit exceeded in[456]_input Shunt voltage(uV) for channels 1, 2, and 3 respectively +samples Number of samples using in the averaging mode. + Supports the list of number of samples: + 1, 4, 16, 64, 128, 256, 512, 1024
drivers/hwmon/ina3221.c +66 -1
131 lines not on this page · raw message
Signature · 1 line
2.17.1
Quoted 9 lines · Nicolin Chen
The CONFIG register has a 3-bit averaging mode field for users to setup the number of samples that are collected and averaged together. This is very useful to filter noise from sensor data.
This patch adds a 'samples' sysfs node using
hwmon_chip_samplesof hwmon core, and updates wait time calculation by taking this samples value into account.Signed-off-by Nicolin Chen <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter