Skip to contentSkip to conversation

regulator: stm32-pwr: Staticize local symbols

PATCH In review Axel Lin 2 participants 2 messages Apr 17, 2019

Subsystems (2)
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: stm32-pwr: Staticize local symbols

These symbols are only used by this driver, make them static.

---
 drivers/regulator/stm32-pwr.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/regulator/stm32-pwr.c +3 -3
index e434b26d4c8b..222d593d76a2 100644
@@ -32,7 +32,7 @@ enum {
 	STM32PWR_REG_NUM_REGS
 };
 
-u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
+static u32 ready_mask_table[STM32PWR_REG_NUM_REGS] = {
 	[PWR_REG11] = REG_1_1_RDY,
 	[PWR_REG18] = REG_1_8_RDY,
 	[PWR_USB33] = USB_3_3_RDY,
@@ -44,7 +44,7 @@ struct stm32_pwr_reg {
 	u32 ready_mask;
 };
 
-int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
+static int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
 {
 	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
 	u32 val;
@@ -54,7 +54,7 @@ int stm32_pwr_reg_is_ready(struct regulator_dev *rdev)
 	return (val & priv->ready_mask);
 }
 
-int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
+static int stm32_pwr_reg_is_enabled(struct regulator_dev *rdev)
 {
 	struct stm32_pwr_reg *priv = rdev_get_drvdata(rdev);
 	u32 val;
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 1 line · Axel Lin

These symbols are only used by this driver, make them static.

Someone already sent a patch for this.